Copper Phosphinate Complexes as Molecular Precursors for Ethanol Dehydrogenation Catalysts

Nowadays, the production of acetaldehyde heavily relies on the petroleum industry. Developing new catalysts for the ethanol dehydrogenation process that could sustainably substitute current acetaldehyde production methods is highly desired. Among the ethanol dehydrogenation catalysts, copper-based materials have been intensively studied. Unfortunately, the Cu-based catalysts suffer from sintering and coking, which lead to rapid deactivation with time-on-stream. Phosphorus doping has been demonstrated to diminish coking in methanol dehydrogenation, fluid catalytic cracking, and ethanol-to-olefin reactions. This work reports a pioneering application of the well-characterized copper phosphinate complexes as molecular precursors for copper-based ethanol dehydrogenation catalysts enriched with phosphate groups (Cu-phosphate/SiO2). Three new catalysts (CuP-1, CuP-2, and CuP-3), prepared by the deposition of complexes {Cu(SAAP)}n (1), [Cu6(BSAAP)6] (2), and [Cu3(NAAP)3] (3) on the surface of commercial SiO2, calcination at 500 °C, and reduction in the stream of the forming gas 5% H2/N2 at 400 °C, exhibited unusual properties. First, the catalysts showed a rapid increase in catalytic activity. After reaching the maximum conversion, the catalyst started to deactivate. The unusual behavior could be explained by the presence of the phosphate phase, which made Cu2+ reduction more difficult. The phosphorus content gradually decreased during time-on-stream, copper was reduced, and the activity increased. The deactivation of the catalyst could be related to the copper diffusion processes. The most active CuP-1 catalyst reaches a maximum of 73% ethanol conversion and over 98% acetaldehyde selectivity at 325 °C and WHSV = 2.37 h-1.

When ring makes the difference: coordination properties of Cu2+/Cu+ complexes with sulfur-pendant polyazamacrocycles for radiopharmaceutical applications

The Cu2+/+ complexes formed by sulfur-containing polyazamacrocycles were studied in aqueous solution using potentiometry, UV-Vis, NMR, EPR, and cyclic voltammetry.

Complexation of C-Functionalized Cyclams with Copper(II) and Zinc(II): Similarities and Changes When Compared to Parent Cyclam Analogues

Herein, we report a comprehensive coordination study of the previously reported ligands cyclam, CB-cyclam, TMC, DMC, and CB-DMC and of their C-functional analogues, cyclam-E, CB-cyclam-E, TMC-E, DMC-E, and CB-DMC-E. This group of ligands includes cyclam, cross-bridged cyclams, their di- or tetramethylated derivatives, and the analogues bearing an additional hydroxyethyl group on one β-N position of the ring. The Cu(II) and Zn(II) complexes of these macrocycles have been highlighted previously for the biological interest, but the details of their structures in the solid state and in solution remained largely unexplored. In particular, we analyzed the impact that adding noncoordinating N-methyl and C-hydroxyethyl functionalities has in the structures of the complexes. All the Cu(II) and Zn(II) complexes were synthesized and investigated using single crystal X-ray diffraction and NMR, electronic absorption, and EPR spectroscopies, along with DFT studies. Dissociation kinetics experiments in acidic conditions and electrochemical studies were also performed. Special attention was paid to analyze the different configurations present in solution and in the solid state, as well as the impact of the C-appended hydroxyethyl group on the coordination behavior. Various ratios of the trans-I, trans-III, and cis-V configurations have been observed depending on the degree of N-methylation and the presence of the ethylene cross-bridge.

Towards the development of a targeted albumin-binding radioligand: Synthesis, radiolabelling and preliminary in vivo studies

INTRODUCTION

The compound named 4-[10-(4-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)butanamido)decyl]-11-[10-(β,d-glucopyranos-1-yl)-1-oxodecyl]-1,4,8,11-tetraazacyclotetradecane-1,8-diacetic acid is a newly synthesised molecule capable of binding in vivo to albumin to form a bioconjugate. This compound was given the name, GluCAB(glucose-chelator-albumin-binder)-maleimide-1. Radiolabelled GluCAB-maleimide-1 and subsequent bioconjugate is proposed for prospective oncological applications and works on the theoretical dual-targeting principle of tumour localization through the "enhanced permeability and retention (EPR) effect" and glucose metabolism.

METHODS

The precursor, GluCAB-amine-2, and subsequent GluCAB-maleimide-1 was synthesised via sequential regioselective, distal N-functionalisation of a cyclam template with a tether containing a synthetically-derived β-glucoside followed by a second linker to incorporate a maleimide moiety for albumin-binding. GluCAB-amine-2 was radiolabelled with [64Cu]CuCl2 in 0.1 M NH4OAc (pH 3.5, 90 °C, 30 min), purified and converted post-labeling in 0.01 M PBS to [64Cu]Cu-GluCAB-maleimide-1. Serum stability and protein binding studies were completed according to described methods. Healthy BALB/c ice (three groups of n = 5) were injected intravenously with [64Cu]Cu-TETA, [64Cu]Cu-GluCAB-amine-2 or [64Cu]Cu-GluCAB-maleimide-1 and imaged using microPET/CT at 1, 2, 4, 8 and 24 h post-injection. Biodistribution of the compounds were determined ex vivo after 24 h using gamma counting.

RESULTS

GluCAB-maleimide-1 was synthesised in five consecutive steps with an overall yield of 11%. [64Cu]Cu-GluCAB-amine-2 (97% labelling efficiency) was converted to [64Cu]Cu-GluCAB-maleimide-1 (93% conversion; 90% radiochemical purity). Biodistribution analysis indicated that the control compounds were rapidly and almost completely excreted as compared to [64Cu]Cu-GluCAB-maleimide-1 that exhibited a prolonged biological half-life (6-8 h). Both, [64Cu]Cu-GluCAB-maleimide-1 and -amine-2 were excreted through the hepatobiliary system but a higher hepatic presence of the albumin-bound compound was noted. CONCLUSIONS, ADVANCES IN KNOWLEDGE AND IMPLICATIONS FOR PATIENT CARE: This initial evaluation paves the way for further investigation into the tumour targeting potential of [64Cu]Cu-GluCAB-maleimide-1. An efficient targeted radioligand will allow for further development of a prospective theranostic agent for more personalized patient treatment which potentially improves overall patient prognosis, outcome and health care.

Cross-Bridged Cyclam with Phosphonate and Phosphinate Pendant Arms: Chelators for Copper Radioisotopes with Fast Complexation

Cross-bridged cyclam derivatives bearing two phosphonate (H₄L¹), bis(phosphinate) (H₄L²), or phosphinate (H₂L³) pendant arms were synthesized and studied with respect to their application as copper radioisotope carriers in nuclear medicine. The ligands show high macrocycle basicity (pK₁ > 14) and high Cu(II) complex stability (log K = 20-24). The complexation and dissociation kinetics of the Cu(II) complexes were studied by ultraviolet-visible spectroscopy. Phosphonate Cu(II)-H₄L¹ and bis(phosphinate) Cu(II)-H₄L² complexes form very quickly, reaching quantitative formation within 1 s at pH ∼6 and millimolar concentrations. Conversely, the formation of the phosphinate complex Cu(II)-H₂L³ is much slower (9 min at pH ∼6) due to the low stability of the out-of-cage reaction intermediate. All studied complexes are highly kinetically inert, showing half-lives of 120, 11, and 111 h for Cu(II)-H₄L¹, Cu(II)-H₄L², and Cu(II)-H₂L³ complexes, respectively, in 1 M HClO₄ at 90 °C. The high thermodynamic stability, fast formation, and extreme kinetic inertness of Cu(II) complexes indicate that phosphonate and bis(phosphinate) derivatives are promising ligands for nuclear medicine.

Selective and clean synthesis of aminoalkyl-H-phosphinic acids from hypophosphorous acid by phospha-Mannich reaction

Aminoalkyl-H-phosphinic acids, also called aminoalkylphosphonous acids, are investigated as biologically active analogues of carboxylic amino acids and/or as valuable intermediates for synthesis of other aminoalkylphosphorus acids. Their synthesis has been mostly accomplished by phospha-Mannich reaction of a P–H precursor, an aldehyde and an amine. The reaction is rarely clean and high-yielding. Here, reaction of H₃PO₂ with secondary amines and formaldehyde in wet AcOH led to aminomethyl-H-phosphinic acids in nearly quantitative yields and with almost no by-products. Surprisingly, the reaction outcome depended on the basicity of the amines. Amines with pK_a > 7–8 gave the desired products. For less basic amines, reductive N-methylation coupled with oxidation of H₃PO₂ to H₃PO₃ became a relevant side reaction. Primary amines reacted less clearly and amino-bis(methyl-H-phosphinic acids) were obtained only for very basic amines. Reaction yields with higher aldehydes were lower. Unique carboxylic–phosphinic–phosphonic acids as well as poly(H-phosphinic acids) derived from polyamines were obtained. Synthetic usefulness of the aminoalkyl-H-phosphinic was illustrated in P–H bond oxidation and its addition to double bonds, and in selective amine deprotection. Compounds with an ethylene-diamine fragment, e.g. most common polyazamacrocycles, are not suitable substrates. The X-ray solid-state structures of seventeen aminoalkyl-phosphinic acids were determined. In the reaction mechanism, N-hydroxyalkyl species R₂NCH₂OH and [R₂N(CH₂OH)₂]⁺, probably stabilized as acetate esters, are suggested as the reactive intermediates. This mechanism is an alternative one to the known phospha-Mannich reaction mechanisms. The conditions can be utilized in syntheses of various aminoalkylphosphorus compounds.

Acetic acid was used as a new solvent for phospha-Mannich reaction leading to clear reaction mixtures and high yields of the aminoalkylphosphonous acids (AHPA), and hydroxymethylated species were suggested as key intermediates in the reaction.

Metal phosphonates incorporating metalloligands: assembly, structures and properties

This feature article summarizes the current status of metal–metalloligand phosphonates including the synthetic strategies, crystal structures and properties. Future challenges in this field are discussed.