Sulfonated Zinc Phthalocyanine Coating as an Efficient and Ecofriendly Corrosion Inhibitor for Copper Surfaces: An In Silico Led Design and Its Experimental Validation

The current study highlights the successful integration of an in silico design with experimental validation to create a highly effective corrosion inhibitor for copper (Cu) surfaces. The synthesized sulfonated zinc phthalocyanine (Zn-Pc) is electrochemically characterized and demonstrates an impressive 97% inhibition efficiency, comparable to the widely used industrial corrosion inhibitor, BTA, for Cu surfaces. The corrosion inhibition is comprehensively analyzed through potentiodynamic polarization and impedance spectroscopy techniques, supported by their respective equivalent circuits. Furthermore, the sample undergoes thorough characterization using scanning electron microscopy, energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy, contact angle measurements, and atomic force microscopy. Density functional theory calculations reveal that sulfonated Zn-Pc exhibits the highest interaction energy, underscoring its exceptional inhibition properties. These results open possibilities for utilizing computational methods to design and optimize corrosion inhibitors for protection of Cu surfaces.

Study of the Interaction of an Iron Phthalocyanine Complex over Surface Modified Carbon Nanotubes

Carbon nanotubes (CNT) were prepared by a modified chemical vapor deposition (CVD) method. The synthesized carbon materials were treated with acidic and basic solutions in order to introduce certain surface functional groups, mainly containing oxygen (OCNT) or amine (ACNT) species. These modified CNTs (OCNT and ACNT) as well as the originally prepared CNT were reacted with a non-ionic Fe complex, Iron (II) Phthalocyanine, and three composites were obtained. The amount of metal complex introduced in each case and the interaction between the complex and the CNT materials were studied with the aid of various characterization techniques such as TGA, XRD, and XPS. The results obtained in these experiments all indicated that the interaction between the complex and the CNT was greatly affected by the functionalization of the latter.

In situ synthesis and encapsulation of copper phthalocyanine into MIL-101(Cr) and MIL-100(Fe) pores and investigation of their catalytic performance in the epoxidation of styrene

In this work, copper phthalocyanine (CuPc) was encapsulated into mesocages of MIL-101(Cr) and MIL-100(Fe) by assembling CuPc’s constitutional fractions using a deep eutectic solvent. The prepared materials, CuPc@MIL-101(Cr) and CuPc@MIL-100(Fe), were characterized by powder X-ray diffraction (PXRD), FT-IR, UV-vis and diffuse reflectance UV (DR-UV) spectroscopies, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and ICP-OES spectrometry. The prepared materials were used as heterogeneous catalysts for catalytic epoxidation of styrene with molecular oxygen and also tert-butyl hydroperoxide (TBHP) as oxidants in acetonitrile as a solvent. The impact of MOFs and the role of the CuPc complex as the active species in the MOFs’ cages in the epoxidation of styrene were investigated. Among the prepared catalysts, CuPc@MIL-101(Cr) showed the best performance. The heterogeneity of the catalysts was examined by a hot filtration test and ICP-OES of the filtrates after the reaction. Spent catalysts were analyzed by PXRD, FT-IR, UV-DRS, and TEM for reusability investigation and also to further explore the heterogeneous nature of the hybrid materials. Results showed that the prepared catalysts could be recycled and used for several concoctive times without a considerable drop in activity.

Synthesis of non-peripherally tetra-substituted copper(ii) phthalocyanines: characterization, optical and surface properties, fabrication and photo-electrical properties of a photosensitive diode

This study describes the synthesis and characterization of a non-peripherally tetra-substituted copper(ii) phthalocyanine bearing 4-(trifluoromethoxy)phenol groups.

A high-sensitive room temperature gas sensor based on cobalt phthalocyanines and reduced graphene oxide nanohybrids for the ppb-levels of ammonia detection

Highly sensitive gas sensing materials are of great importance for environmental pollution monitoring. In this study, four nanohybrid materials containing different phenoxyl substituents of cobalt phthalocyanines (tetra-β-carboxylphenoxylphthalocyanine cobalt (cpoPcCo), tetra-β-(4-carboxy-3-methoxyphenoxy)phthalocyanine cobalt (cmpoPcCo), tetra-β-phenoxylphthalocyanine cobalt (poPcCo), and tetra-β-(3-methoxyphenoxy)phthalocyanine cobalt (mpoPcCo)) and reduced graphene oxide (rGO) (RPcCo/rGO) were synthesized via non-covalent interactions as a high performance gas sensing materials for the ppb-level detection of ammonia (NH₃). Various characterization techniques, including FT-IR, Raman, UV-vis, TGA, XPS and SEM, were used to confirm the structure, element information and morphology of the as-synthesized materials. The obtained materials were used in interdigital electrodes to fabricate the sensing device, and the gas sensing performance was investigated at room temperature. The obtained sensors exhibited excellent sensitivity, selectivity, good reproducibility and perfect response–concentration linearity towards NH₃, which are mainly ascribed to the synergetic effects of RPcCo and rGO due to the specific surface area structure for NH₃ diffusion, the abundant active sites to adsorb NH₃, and excellent conductivity for efficient electron transport, particularly the effect of RPcCo. For example, the cpoPcCo/rGO-based sensor showed a higher and faster response for low concentration of NH₃ (∼2.5 and 45 s for 100 ppb of NH₃), a ppb level detection and superior stability over 60 days. Besides, the effect of different phenoxyl substituents of cobalt phthalocyanines on the sensing performance and the sensing mechanism for the sensitivity enhancement were discussed and confirmed by the first-principles density functional theory calculations and electrochemical impedance spectroscopy (EIS).

Highly sensitive gas sensing materials are of great importance for environmental pollution monitoring.