Recent advances in luminescence and aptamer sensors based analytical determination, adsorptive removal, degradation of the tetracycline antibiotics, an overview and outlook

Tetracycline antibiotics (TCs), one of the important antibiotic groups, have been widely used in human and veterinary medicines. Their residues in foodstuff, soil and sewage have caused serious threats to food safety, ecological environment and human health. Here, we reviewed the potential harms of TCs residues to foodstuff, environment and human beings, discussed the luminescence and aptamer sensors based analytical determination, adsorptive removal, and degradation strategies of TCs residues from a recent 5-year period. The advantages and intrinsic limitations of these strategies have been compared and discussed, the potential challenges and opportunities in TCs residues degradation have also been deliberated and explored.

A lab-made screen-printed sensing strip for sensitive and selective electrochemical detection of butylated hydroxyanisole

This study describes the fabrication of a lab-made screen-printed electrode (LabSPE) and its sensing ability for the detection of butylated hydroxyanisole (BHA) which is a synthetic antioxidant utilized widely in food industries. The lab-made screen-printed electrodes were printed on a polycarbonate substrate stepwise via a screen-printing technique using various inks suitable for electrode templates and then modified for the detection of BHA. As for the design of the sensor, firstly, graphitic carbon nitride (g-C₃N₄) was synthesized electrochemically through the one-pot synthesis method. After the synthesis of Fe₃O₄ nanoparticles (Fe₃O₄ NPs), the surface of SPE was modified with the dual composite consisting of g-C₃N₄ and Fe₃O₄ NPs. Lastly, platinum nanoparticles (Pt NPs) were deposited electrochemically on the modified electrode in 0.5 M HCl solution containing 2 mM H₂PtCl₆ at a constant potential of 0.25 V for 45 s. After optimization of varied parameters such as pH of the electrolyte solution, deposition time, and deposition potential, the current responses of the sensor (Pt/g-C₃N₄-Fe₃O₄/LabSPE) toward BHA displayed linearity in the wide concentration range of 0.25 μM to 90 μM with a low detection limit of 0.053 μM. The selectivity of Pt/g-C₃N₄-Fe₃O₄/SPE was tested successfully in the presence of other antioxidants (BHT, TBHQ, GA, and PG). Moreover, the applicability of the proposed sensor for practical tests was verified by the detection of BHA in commercial samples.

Graphene-based photocatalytic nanocomposites used to treat pharmaceutical and personal care product wastewater: A review

Photocatalytic technology has been widely studied by researchers in the field of environmental purification. This technology can not only completely convert organic pollutants into small molecules of CO₂ and H₂O through redox reactions but also remove metal ions and other inorganic substances from water. This article reviews the research progress of graphene-based photocatalytic nanocomposites in the treatment of wastewater. First, we elucidate the basic principles of photocatalysis, the types of graphene-based nanocomposites, and the role of graphene in photocatalysis (e.g., graphene can accelerate the separation of photon-hole pairs and increase the intensity and range of light absorption). Second, the preparation, characterization, and application of composites in wastewater are introduced. We also discuss the kinetic model of the photocatalytic degradation of pollutants. Finally, the enhancement mechanism of graphene in terms of photocatalysis is not completely clear, and graphene-based photocatalysts with high catalytic efficiency, low cost, and large-scale production have not yet appeared, so there is an urgent need for more extensive and in-depth research.

Synergistic Effects of Redox Couples and Oxygen Vacancies Improve the Tetracycline Degradation Property of La2NiMnO6

Improving the e^- and h⁺ separation efficiency and promoting the production of more radicals is the key to improving the degradation efficiency of catalytic degradation of antibiotics. On the other hand, intermediate analysis of antibiotics in the dark adsorption and light irradiation process is very important to clarify the entire antibiotic degradation pathway. Here, the La₂NiMnO₆ (LNMO) catalyst was prepared by the sol-gel method and the calcination method. By changing the calcination temperature (800, 900, and 1000 °C), the LNMO-based catalysts were successfully formed, abbreviated as L-800, L-900, and L-1000. XPS measurements demonstrated the presence of Mn⁴⁺, Mn³⁺, Mn²⁺, and oxygen vacancies (OVs) in the LNMO-based catalysts. Analysis of PL, PC, EIS, and TR-PL demonstrated that L-900 had the highest separation efficiency and fastest carrier mobility. The LNMO-based catalysts were used to degrade tetracycline (TC). With the optimized catalyst L-900, the decomposition rate of TC reached 99.57% in 120 min. The entire TC degradation pathway was analyzed according to LC-MS measurements. Radical trap experiments and ESR technology revealed that the synergistic effect of Mn⁴⁺/Mn³⁺, Mn⁴⁺/Mn²⁺, and OVs not only effectively separated e^- and h⁺ but also facilitated the formation of superoxide radicals (^•O₂^-) to accelerate TC degradation. Radicals ^•OH, h⁺, and ^•O₂^- all contributed to TC deterioration in increasing order of importance. In addition, XPS measurements of the L-900 catalyst before and after use indicated that Mn⁴⁺/Mn³⁺, Mn⁴⁺/Mn²⁺, and OVs were not reactants but mediators of e^- and h⁺. Finally, the mechanism of TC degradation with the LNMO-based catalysts was discussed. This work provided new material for TC degradation in the wastewater.

Facile preparation of graphitic carbon nitride nanosheet/agar composite hydrogels for removal of tetracycline via the synergy of adsorption and photocatalysis

Compared with the BCN/agar composite hydrogel, the CNNS/agar 4 composite hydrogel exhibited a much higher photocatalytic activity for tetracycline degradation due to suppressive recombination of electrons and holes.

Recent advancements of g-C3N4-based magnetic photocatalysts towards the degradation of organic pollutants: a review

Heterogeneous photocatalysis premised on advanced oxidation processes has witnessed a broad application perspective, including water purification and environmental remediation. In particular, the graphitic carbon nitride (g-C₃N₄), an earth-abundant metal-free conjugated polymer, has acquired extensive application scope and interdisciplinary consideration owing to its outstanding structural and physicochemical properties. However, several issues such as the high recombination rate of the photo-generated electron-hole pairs, smaller specific surface area, and lower electrical conductivity curtail the catalytic efficacy of bulk g-C₃N₄. Another challenging task is separating the catalyst from the reaction medium, limiting their reusability and practical applications. Therefore, several methodologies are adopted strategically to tackle these issues. Attention is being paid, especially to the magnetic nanocomposites (NCs) based catalysts to enhance efficiency and proficient reusability property. This review summarizes the latest progress related to the design and development of magnetic g-C₃N₄-based NCs and their utilization in photocatalytic systems. The usefulness of the semiconductor heterojunctions on the catalytic activity, working mechanism, and degradation of pollutants are discussed in detail. The major challenges and prospects of using magnetic g-C₃N₄-based NCs for photocatalytic applications are highlighted in this report.

One-Step Microwave-Assisted Synthesis and Visible-Light Photocatalytic Activity Enhancement of BiOBr/RGO Nanocomposites for Degradation of Methylene Blue

In this study, bismuth oxybromide/reduced graphene oxide (BiOBr/RGO), i.e. BiOBr-G nanocomposites, were synthesized using a one-step microwave-assisted method. The structure of the synthesized nanocomposites was characterized using Raman spectroscopy, X-ray diffractometry (XRD), photoluminescence (PL) emission spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), and ultraviolet-visible diffuse reflection spectroscopy (DRS). In addition, the ability of the nanocomposite to degrade methylene blue (MB) under visible light irradiation was investigated. The synthesized nanocomposite achieved an MB degradation rate of above 96% within 75 min of continuous visible light irradiation. In addition, the synthesized BiOBr-G nanocomposite exhibited significantly enhanced photocatalytic activity for the degradation of MB. Furthermore, the results revealed that the separation of the photogenerated electron-hole pairs in the BiOBr-G nanocomposite enhanced the ability of the nanocomposite to absorb visible light, thus improving the photocatalytic properties of the nanocomposites. Lastly, the MB photo-degradation mechanism of BiOBr-G was investigated, and the results revealed that the BiOBr-G nanocomposites exhibited good photocatalytic activity.

Fabricating a novel ternary recyclable Fe3O4/graphene/sulfur-doped g-C3N4 composite catalyst for enhanced removal of ranitidine under visible-light irradiation and reducing of its N-nitrosodimethylamine formation potential

A novel ternary recyclable Fe₃O₄/graphene/sulfur-doped g-C₃N₄ (Fe₃O₄/GE/SCN) composite catalyst was synthesized and adopted in a visible-light driven catalytic system for the degradation of ranitidine, which is an important precursor of the emerging disinfection by-product of N-nitrosodimethylamine (NDMA). The addition of GE and Fe₃O₄ significantly improved the interface charge transfer of SCN, increased the light collection efficiency and decreased the photogenerated charge recombination efficiency. Considering both the ranitidine removal efficiency and catalyst recovery, the Fe₃O₄ mass fraction of 20% (20%-Fe₃O₄/GE/SCN) was recommended. Ranitidine (≤2 mg/L) was completely removed in 60 min under the conditions of an initial pH of 7.0 and a 20%-Fe₃O₄/GE/SCN dose of 1.0 g/L, and its degradation fitted well with the pseudo first-order kinetics model. Electron paramagnetic resonance analysis and trapping experiments confirmed that ·O₂^-, ·OH and h⁺ participated in the degradation of ranitidine. Ranitidine was removed through the pathways of demethylation and hydroxylation based on the analysis of the detected degradation intermediates, and 57.3% of the NDMA formation potential (FP) was reduced after the reaction. The visible-light driven 20%-Fe₃O₄/GE/SCN catalytic technology is a promising method not only for the control of NDMA FP but also the catalyst could be recovered and reused.

A recyclable tetracycline imprinted polymeric SPR sensor: in synergy with itaconic acid and methacrylic acid

A novel tetracycline (TC) imprinted polymer was prepared in visible light via synergy of dual functional group monomers methacrylic acid (MAA) and itaconic acid (IA) for selective detection of TC in urine and milk samples.

Fe3O4-Loaded g-C3N4/C-Layered Composite as a Ternary Photocatalyst for Tetracycline Degradation

A ternary photocatalyst, Fe₃O₄-loaded g-C₃N₄/C-layered composite (g-C₃N₄/C/Fe₃O₄) was fabricated by a facile sonication and in situ precipitation technique. Carbon nanosheets were prepared using the remaining non-metallic components of waste printed circuit boards as carbon sources. In this hybrid structure, g-C₃N₄ was immobilized on the surfaces of carbon nanosheets to form a layered composite, and 10-15 nm Fe₃O₄ nanoparticles are uniformly deposited on the surface of the composite material. The photocatalytic performance of the catalyst was studied by degrading tetracycline (TC) under simulated sunlight. The results showed that the photoactivity of the g-C₃N₄/C/Fe₃O₄ composite to TC was significantly enhanced, and the degradation rate was 10.07 times higher than that of pure g-C₃N₄, which was attributed to Fe₃O₄ nanoparticles and carbon nanosheets. Carbon sheets with good conductivity are an excellent electron transporter, which promotes the separation of photogenerated carriers and the Fe₃O₄ nanoparticles can utilize electrons effectively as a center of oxidation-reduction. Moreover, a possible photocatalytic mechanism for the excellent photocatalytic performance was proposed.

Enhanced photocatalytic activity of Bi2WO6 for the degradation of TC by synergistic effects between amorphous Ti and Ni as hole–electron cocatalysts

The possible mechanism of photocatalytic degradation of TC by Ni/Ti-Bi₂WO₆ under visible light.