Naphthalimide-based AIE-active receptor: HSO4-/SO42- sensing and detection of Pb2+ by receptor-anion ensemble in aqueous medium

Herein we report a naphthalimide-chromophore based blue light emitting Aggregation-Induced Emission (AIE) active fluorescent chemo-sensor for the selective turn-on fluorescent sensing of HSO4-/SO42- ions in the aqueous medium through in-depth spectroscopic and microscopic analysis. HSO4-/SO42-sensing in aqueous environment is quite challenging due to its high hydration energy, however Nap-1 showed a detection limit down to the micromolar range without any interference from the other tested competitive anions. The sensing mechanism has been discussed thoroughly. Nap-1 was further applied in detection of HSO4-/SO42- ions in real water as well as in fabrication of an economical paper strip model. The receptor-anion ensemble was further used for the sensing of heavy metal ions such as Pb2+ in the micromolar range. Nap-1 was used for the construction of two inputs INHIBIT type molecular logic gate.

A Chromo-fluorogenic Probe for Selective Detection of Picric Acid Alongside Its Recovery by Aliphatic Amines and Construction of Molecular Logic Gates

Nitroaromatic compounds are illicit explosive chemicals. For environmental security and homeland safety, selective and sensitive identification of these secondary-class explosives has been a reason for the exhaustive research arena of chemists for about a decade. We introduced a sensitive optical sensor with desalted neutral red (NR) dye. After ingressing picric acid (PA) in acetonitrile, the probe becomes non-fluorescent, displaying a colorimetric change from yellow to pink. The quenched phenomena and the changed color were re-established with aliphatic amine, trimethylamine (TEA). The reversibility is produced cyclically, both in fluorimetrically and spectrophotometrically. The detection limit for PA with our probe comes out as 0.639 µM; this value is significantly lower than many chemosensors available in the literature. Also, NR-stained filter paper strips-based test kit analysis has been deployed as a displayable photonic device for in-situ detection of PA. Furthermore, the whole system was conceptualized to produce single input, single output, and double input single output logic gates, which can be applied to digital devices. The chronological input manner as NTP (NR- TEA-PA) pushed us to configure a molecular keypad lock system, the basis of digital locking devices. The repeatable & reversible detection system exhibits "Write read- Erase-read Write-read' type memory devices.

Aggregates-based fluorescence sensing technology for food hazard detection: Principles, improvement strategies, and applications

Aggregates often exhibit modified or completely new properties compared with their molecular elements, making them an extraordinarily advantageous form of materials. The fluorescence signal change characteristics resulting from molecular aggregation endow aggregates with high sensitivity and broad applicability. In molecular aggregates, the photoluminescence properties at the molecular level can be annihilated or elevated, leading to aggregation-causing quenching (ACQ) or aggregation-induced emission (AIE) effects. This change in photoluminescence properties can be intelligently introduced in food hazard detection. Recognition units can combine with the aggregate-based sensor by joining the aggregation process, endowing the sensor with the high specificity of analytes (such as mycotoxins, pathogens, and complex organic molecules). In this review, aggregation mechanisms, structural characteristics of fluorescent materials (including ACQ/AIE-activated), and their applications in food hazard detection (with/without recognition units) are summarized. Because the design of aggregate-based sensors may be influenced by the properties of their components, the sensing mechanisms of different fluorescent materials were described separately. Details of fluorescent materials, including conventional organic dyes, carbon nanomaterials, quantum dots, polymers and polymer-based nanostructures and metal nanoclusters, and recognition units, such as aptamer, antibody, molecular imprinting, and host-guest recognition, are discussed. In addition, future trends of developing aggregate-based fluorescence sensing technology in monitoring food hazards are also proposed.

Novel single-armed nitrogen-heterocyclic salamo-based fluorescent sensors for the detection of Al3+ and CN. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2021;258:119815. [PMID: 33930852 DOI: 10.1016/j.saa.2021.119815]

Two novel single-armed nitrogen-heterocyclic chemosensors with basically similar structures, PDNS and PZNS, were synthesized to specifically identify Al³⁺ in DMS:H₂O (1:1 v/v) solution by fluorescence emission spectroscopy, and the colour of PDNS and PZNS changed from yellow to colorless when Al³⁺ was added under daylight. This is the first time that nitrogen-heterocyclic is introduced into salamo-based chemical sensor. At excitation wavelengths of 361 and 365 nm, solutions of PDNS and PZNS changed to intense green-blue fluorescence. Furthermore, it was found that PDNS/PZNS and Al³⁺ have excellent binding capacity, the lower limit of detection (LOD = 6.25 × 10^-9/1.26 × 10^-9 mol·dm^-3) is also calculated. In addition, sensor PZNS can detect Al³⁺ in a solution system with up to 95% water content and applicable pH range is 3-12. Compared to other salamo-based sensors, PZNS and PDNS have broader detection conditions and wider utilities. PZNS can also identify CN^- in fluorescence spectrum. PZNS can be used for detection of Al³⁺ in aqueous systems in daily production and life.

A New Compound for Sequential Sensing of Picric Acid and Aliphatic Amines: Physicochemical Details and Construction of Molecular Logic Gates

Picric acid (PA) at low concentration is a serious water pollutant. Alongside, aliphatic amines (AAs) add to the queue to pollute surface water. Plenty of reports are available to sense PA with an ultralow limit of detection (LOD). However, only a handful of works are testified to detect AAs. A new fluorescent donor-acceptor compound has been synthesized with inherent intramolecular charge transfer (ICT) character that enables selective and sensitive colorimetric quantitative detection of PA and AAs with low LODs in non-aqueous as well as aqueous solutions. The synthesized compound is based on a hemicyanine skeleton containing two pyridenylmethylamino groups at the donor and a benzothiazole moiety at the acceptor ends. The detailed mechanisms and reaction dynamics are explained spectroscopically along with computational support. The fluorescence property of the detecting compound changes due to protonation of its pyridinyl centers by PA leading to quenching of fluorescence and subsequently de-protonation by AAs to revive the signal. We have further designed logic circuits from the acquired optical responses by sequential interactions.

Synthesis of pyrazole anchored three-coordinated organoboranes and their application in the detection of picric acid

Three-coordinated organoboron fluorophores bearing 3,5-diphenyl pyrazoles have been synthesized. The pyrazole anchored boron fluorophores show selective fluorescence quenching response to trinitrophenol (or) picric acid (PA) and have the ability to discriminate picric acid over other analytes. We investigated nonlinear optical (NLO) properties of these three-coordinated organoboron compounds (in solutions) in the presence and absence of PA. In absence of PA, the two-photon-absorption coefficient (β) of organoboron fluorophores exhibits a variation from 2 × 10-12 cm W-1 to 4 × 10-12 cm W-1. The results also reveal that the NLO characteristics of organoboron fluorophores exhibit a discernible variation with PA addition which has correlations with quenching observed in fluorescence measurements.

A novel highly sensitive dual-channel chemical sensor for sequential recognition of Cu2+ and CN− in aqueous media and its bioimaging applications in living cells

A simple and unique dual-channel chemical probe (DH) was designed and synthesized, which not only realized sequential recognition of Cu2+ and CN− by colorimetric and fluorometric methods, but also realized fluorescence detection of CN−.

Aggregation-directed High Fidelity Sensing of Picric Acid by a Perylenediimide-based Luminogen

Widespread use of picric acid (PA) in chemical industries and deadly explosives poses dreadful impact on all living creatures as well as the natural environment and has raised global concerns that necessitate the development of fast and efficient sensing platforms. To address this issue, herein, we report a perylenediimide-peptide conjugate, PDI-1, for detection of PA in methanol. The probe displays typical aggregation caused quenching (ACQ) behaviour and exhibits a fluorescence "turn-off" sensory response towards PA which is unaffected by the presence of other interfering nitroaromatic compounds. The sensing mechanism involves PA induced aggregation of the probe into higher order tape like structures which leads to quenching of emission. The probe possesses a low detection limit of 5.6 nM or 1.28 ppb and a significantly high Stern-Volmer constant of 6.87×10⁴  M^-1 . It also exhibits conducting properties in the presence of PA vapours and thus represents a prospective candidate for vapour phase detection of PA. This is, to the best of our knowledge, the first example of a perylenediimide based probe that demonstrates extremely specific, selective and sensitive detection of PA and thus grasps the potential for application in practical scenarios.

A stilbazolium dye-based chromogenic and red-fluorescent probe for recognition of 2,4,6-trinitrophenol in water

Probe DMAS-DP in water shows highly selective decrease in absorbance (475 nm) and fluorescence intensity (615 nm) with 2,4,6-trinitrophenol and colour change from red to yellow (visible light) and red fluorescent to black (365 nm light).

Aggregation induced emission (AIE) active 4-amino-1,8-naphthalimide-Tröger's base for the selective sensing of chemical explosives in competitive aqueous media

The 4-amino-1,8-naphthalimide Tröger's base based AIE-active supramolecular scaffold was synthesized and employed as a highly selective and sensitive fluorescent sensor for nitroaromatic explosives sensing in competitive aqueous media.

A highly sensitive “ON–OFF” optical sensor for the selective detection of cyanide ions in 100% aqueous solutions based on hydrogen bonding and water assisted aggregation induced emission

Nanoparticles N,N′-(pyridine-2,6-diyl)bis(2-(2,4-dichlorophenoxy)acetamide) (1) exhibited an “on–off” emission response toward cyanide (CN⁻) ions in 100% aqueous solutions based on AIE features.

A new salamo-based colorimetric and fluorescent turn-on sensor with aggregation-induced emission for the rapid and highly sensitive detection of cyanide in real samples

A new, simple, and easy-to-manufacture highly selective and sensitive dual-mode sensor A1 with the aggregation-induced emission properties is used for CN⁻ colorimetric and fluorescence detection.

Detection of nitroaromatics based on aggregation induced emission of barbituric acid derivatives

Barbituric acid derivatives with typical aggregation induced emission (AIE) are reported. Their emission wavelengths varied with water fraction of their solution. UV-visible absorption spectroscopy and theoretical calculations revealed the intramolecular charge transfer (ICT) possibility from donor to acceptor and the mechanism was confirmed as a restriction of intramolecular motion (RIM). The AIE properties were affected by the different substituents on barbituric acid. When the molecular volume increased, the AIE effect decreased. Fluorescent quenching mechanism was applied to detect nitroaromatic explosives. For 2,4,6-trinitrophenol (PA), one of the derivatives 5-(4-diphenylamino styrene)-1,3-diphenyl-barbituric acid in THF/H₂O mixture (1:9, v/v), showed amplified fluorescence quenching with a maximum Stern-Volmer quenching constant of 4.1 × 10⁴ M^-1. The solid phase paper test based on 5-(4-diphenylamino styrene)-1,3-diphenyl-barbituric acid also showed a superior sensitivity toward PA both in vapor and solution.

Fluorescent Imidazolium-Type Poly(ionic liquid)s for Bacterial Imaging and Biofilm Inhibition

Fluorescent imidazolium-type poly(ionic liquid)s (PIL)s were synthesized by anion exchange of bromide (Br^-) in poly(3-butyl-1-vinylimidazolium bromide) (PIL-Br) with a fluorescent anion, namely, 3-(4-(1,2,2-triphenylvinyl)phenoxy)propane-1-sulfonate (TPESO₃^-). Such an anion exchange provided antibacterial PILs with aggregation-induced emission (AIE) properties that simultaneously kill and image bacteria. These fluorescence and antibacterial properties could be regulated by controlling the Br^-/TPESO₃^- ratio. The fluorescence intensity increases as this ratio increases, while the antibacterial property exhibits an opposite trend. Moreover, the AIE-type PILs are useful for fluorescently imaging dead bacteria (macroscopically and microscopically) and could effectively inhibit biofilm growth. This study provided a convenient method to obtain fluorescent PILs with adjustable antibacterial and imaging properties.

Recent Advances in Aggregation-Induced Emission Chemosensors for Anion Sensing

The discovery of the aggregation-induced emission (AIE) phenomenon in the early 2000s not only has overcome persistent challenges caused by traditional aggregation-caused quenching (ACQ), but also has brought about new opportunities for the development of useful functional molecules. Through the years, AIE luminogens (AIEgens) have been widely studied for applications in the areas of biomedical and biological sensing, chemosensing, optoelectronics, and stimuli responsive materials. Particularly in the application of chemosensing, a myriad of novel AIE-based sensors has been developed to detect different neutral molecular, cationic and anionic species, with a rapid detection time, high sensitivity and high selectivity by monitoring fluorescence changes. This review thus summarises the recent development of AIE-based chemosensors for the detection of anionic species, including halides and halide-containing anions, cyanides, and sulphur-, phosphorus- and nitrogen- containing anions, as well as a few other anionic species, such as citrate, lactate and anionic surfactants.