Fabrication and Evaluation of a Soy Protein Isolate/Collagen/Sodium Alginate Multifunctional Bilayered Wound Dressing: Release of Cinnamaldehyde, Artemisia absinthium, and Oxygen

Chronic wounds, such as diabetic ulcers and pressure sores, pose significant challenges in modern healthcare due to their prolonged healing times and susceptibility to infections. This study aims to engineer a bilayered wound dressing (BLWD) composed of soy protein isolate/collagen with the ability to release Cinnamaldehyde, Artemisia absinthium (AA), and oxygen. Cinnamaldehyde, magnesium peroxide (MgO2), and AA extract were encapsulated. Nanoparticles were evaluated using scanning electron microscopy (SEM), dynamic light scattering, and ZETA potential tests. Swelling, degradation, water vapor penetration, tensile, MTT, SEM, oxygen release, AA extract release, and antibacterial properties were performed. An in vivo study was carried out to assess the final wound dressing under Hematoxiline&Eosin and Masson trichrome staining analysis and compared to a commercial product. According to the results, the synthesized nanoparticles had an average diameter of about 20 nm with a zeta potential in the range of -20 to -30 mV. The layers had uniform and dense surfaces. The maximum swelling and degradation of the dressing was about 130 and 13% respectively. Generally, better mechanical properties were observed in BLWD than in the single-layer case. More than 90% biocompatibility for the wound dressing was reported. The BLWD could inhibit the growth of Gram-positive and Gram-negative microorganisms. Histopathological analysis showed an acceptable wound-healing property. To sum up, the engineered wound dressing can be a good candidate for more clinical trials.

Design, Synthesis, and Acid-Responsive Disassembly of Shell-Sheddable Block Copolymer Labeled with Benzaldehyde Acetal Junction

Smart nanoassemblies degradable through the cleavage of acid-labile linkages have attracted significant attention because of their biological relevance found in tumor tissues. Despite their high potential to achieve controlled/enhanced drug release, a systematic understanding of structural factors that affect their pH sensitivity remains challenging, particulary in the consruction of effective acid-degradable shell-sheddable nanoassemblies. Herein, the authors report the synthesis and acid-responsive degradation through acid-catalyzed hydrolysis of three acetal and ketal diols and identify benzaldehyde acetal (BzAA) exhibiting optimal hydrolysis profiles in targeted pH ranges to be a suitable candidate for junction acid-labile linkage. The authors explore the synthesis and aqueous micellization of well-defined poly(ethylene glycol)-based block copolymer bearing BzAA linkage covalently attached to a polymethacrylate block for the formation of colloidally-stable nanoassemblies with BzAA groups at core/corona interfaces. Promisingly, the investigation on acid-catalyzed hydrolysis and disassembly shows that the formed nanoassemblies meet the criteria for acid-degradable shell-sheddable nanoassemblies: slow degradation at tumoral pH = 6.5 and rapid disassembly at endo/lysosomal pH = 5.0, while colloidal stability at physiological pH = 7.4. This work guides the design principle of acid-degradable shell-sheddable nanoassemblies bearing BzAA at interfaces, thus offering the promise to address the PEG dilemma and improve endocytosis in tumor-targeting drug delivery.

Structural Determinants of Stimuli-Responsiveness in Amphiphilic Macromolecular Nano-assemblies

Stimuli-responsive nano-assemblies from amphiphilic macromolecules could undergo controlled structural transformations and generate diverse macroscopic phenomenon under stimuli. Due to the controllable responsiveness, they have been applied for broad material and biomedical applications, such as biologics delivery, sensing, imaging, and catalysis. Understanding the mechanisms of the assembly-disassembly processes and structural determinants behind the responsive properties is fundamentally important for designing the next generation of nano-assemblies with programmable responsiveness. In this review, we focus on structural determinants of assemblies from amphiphilic macromolecules and their macromolecular level alterations under stimuli, such as the disruption of hydrophilic-lipophilic balance (HLB), depolymerization, decrosslinking, and changes of molecular packing in assemblies, which eventually lead to a series of macroscopic phenomenon for practical purposes. Applications of stimuli-responsive nano-assemblies in delivery, sensing and imaging were also summarized based on their structural features. We expect this review could provide readers an overview of the structural considerations in the design and applications of nanoassemblies and incentivize more explorations in stimuli-responsive soft matters.

Camptothecin-based prodrug nanomedicines for cancer therapy

Camptothecin (CPT) is a cytotoxic alkaloid that attenuates the replication of cancer cells via blocking DNA topoisomerase 1. Despite its encouraging and wide-spectrum antitumour activity, its application is significantly restricted owing to its instability, low solubility, significant toxicity, and acquired tumour cell resistance. This has resulted in the development of many CPT-based therapeutic agents, especially CPT-based nanomedicines, with improved pharmacokinetic and pharmacodynamic profiles. Specifically, smart CPT-based prodrug nanomedicines with stimuli-responsive release capacity have been extensively explored owing to the advantages such as high drug loading, improved stability, and decreased potential toxicity caused by the carrier materials in comparison with normal nanodrugs and traditional delivery systems. In this review, the potential strategies and applications of CPT-based nanoprodrugs for enhanced CPT delivery toward cancer cells are summarized. We appraise in detail the chemical structures and release mechanisms of these nanoprodrugs and guide materials chemists to develop more powerful nanomedicines that have real clinical therapeutic capacities.

Redox-Triggered Activation of Heavy-Atom-Free Photosensitizer and Implications in Targeted Photodynamic Therapy

A strategy for a redox-activatable heavy-atom-free photosensitizer (PS) based on thiolated naphthalimide has been demonstrated. The PS exhibits excellent reactive oxygen species (ROS) generation in the monomeric state. However, when encapsulated in a disulfide containing bioreducible amphiphilic triblock copolymer aggregate (polymersome), the PS exhibits aggregation in the confined hydrophobic environment, which results in a smaller exciton exchange rate between the singlet and triplet excited states (TDDFT studies), and consequently, the ROS generation ability of the PS was almost fully diminished. Such a PS (in the dormant state)-loaded redox-responsive polymersome showed excellent cellular uptake and intracellular release of the PS in its active form, which enabled cell killing upon light irradiation due to ROS generation. In a control experiment involving aggregates of a similar block copolymer, but lacking the bioreducible disulfide linkage, no intracellular reactivation of the PS was noticed, highlighting the importance of stimuli-responsive polymer assemblies in the area of targeted photodynamic therapy.

Recent Advances in the Application of ATRP in the Synthesis of Drug Delivery Systems

Advances in atom transfer radical polymerization (ATRP) have enabled the precise design and preparation of nanostructured polymeric materials for a variety of biomedical applications. This paper briefly summarizes recent developments in the synthesis of bio-therapeutics for drug delivery based on linear and branched block copolymers and bioconjugates using ATRP, which have been tested in drug delivery systems (DDSs) over the past decade. An important trend is the rapid development of a number of smart DDSs that can release bioactive materials in response to certain external stimuli, either physical (e.g., light, ultrasound, or temperature) or chemical factors (e.g., changes in pH values and/or environmental redox potential). The use of ATRPs in the synthesis of polymeric bioconjugates containing drugs, proteins, and nucleic acids, as well as systems applied in combination therapies, has also received considerable attention.

Delivery process and effective design of vectors for cancer therapy

In recent years, the efficacy of nano-drugs has not been significantly better than that of the drugs themselves, mainly because nano-drugs enter the tumor vasculature, stay near the blood vessels, and cannot enter the tumor tissues or tumor cells to complete the drug delivery process. Although intratumor injection can significantly decrease this risk, the side effects are strong. The advent of drug delivery carrier materials offers an opportunity to avoid the side effects of systemic drug delivery and the damage caused by tumor resection, holding great promise for the future of cancer therapy. Here, we systematically review recent research advances in the classification of drug delivery carrier materials and the delivery process in drug delivery systems. This review is divided into several main sections, first, we summarize the classification of tumor drug carrier materials, including drug delivery vectors and gene delivery vectors, etc., which are introduced in detail, respectively. Then we describe the carrier materials to deliver the drug cascade and the transition pathways for drug delivery, including stabilization transitions, charge inversions, and size changes. Finally, we discuss the current design strategies and research progress of drug vectors and provide a summary and outlook. This review aims to summarize different drug delivery vehicles and delivery processes to provide ideas for effective cancer therapy.

Perfluorocarbon Nanodroplets for Dual Delivery with Ultrasound/GSH-Responsive Release of Model Drug and Passive Release of Nitric Oxide

Nitric oxide (NO) plays a critical role as an important signaling molecule for a variety of biological functions, particularly inhibiting cell proliferation or killing target pathogens. To deliver active radical NO gaseous molecule whose half-life is a few seconds in a stable state, the design and development of effective exogenous NO supply nanocarriers are essential. Additionally, the delivery of desired drugs with NO can produce synergistic effects. Herein, we report a new approach that allows for the fabrication of dual ultrasound (US)/glutathione (GSH)-responsive perfluorocarbon (PFC) nanodroplets for the controlled release of model drug and passive release of safely incorporated NO. The approach centers on the synthesis of a disulfide-labeled amphiphilic block copolymer and its use as a GSH-degradable macromolecular emulsifier for oil-in-water emulsification process of PFC. The fabricated PFC nanodroplets are colloidally stable and enable the encapsulation of both NO and model drugs. Encapsulated drug molecules are synergistically released when ultrasound and GSH are presented, while NO molecules are passively but rapidly released. Our preliminary results demonstrate that the approach is versatile and can be extended to not only GSH-responsive but also other stimuli-responsive block copolymers, thereby allowing for the fabrication of broad choices of stimuli-responsive (smart) PFC-nanodroplets in aqueous solution for dual delivery of drug and NO therapeutics.

Synthesis of multiple stimuli-responsive degradable block copolymers via facile carbonyl imidazole-induced postpolymerization modification

A robust approach that centers on carbonyl imidazole chemistry was used to synthesize a triple-stimuli-responsive degradable block copolymer labeled with acetal, disulfide, and o-nitrobenzyl groups exhibiting acid, reduction, and light responses.

Imidazole-Mediated Dual Location Disassembly of Acid-Degradable Intracellular Drug Delivery Block Copolymer Nanoassemblies

Acid-degradable (or acid-cleavable) polymeric nanoassemblies have witnessed significant progress in anti-cancer drug delivery. However, conventional nanoassemblies designed with acid-cleavable linkages at a single location have several challenges, such as, sluggish degradation, undesired aggregation of degraded products, and difficulty in controlled and on-demand drug release. Herein, a strategy that enables the synthesis of acid-cleavable nanoassemblies labeled with acetaldehyde acetal groups in both hydrophobic cores and at core/corona interfaces, exhibiting synergistic response to acidic pH at dual locations and thus inducing rapid drug release is reported. The systematic analyses suggest that the acid-catalyzed degradation and disassembly are further enhanced by decreasing copolymer concentration (i.e., increasing proton/acetal mole ratio). Moreover, incorporation of acid-ionizable imidazole pendants in the hydrophobic cores improve the encapsulation of doxorubicin, the anticancer drug, through π-π interactions and enhance the acid-catalyzed hydrolysis of acetal linkages situated in the dual locations. Furthermore, the presence of the imidazole pendants induce the occurrence of core-crosslinking that compensates the kinetics of acetal hydrolysis and drug release. These results, combined with in vitro cell toxicity and cellular uptake, suggest the versatility of the dual location acid-degradation strategy in the design and development of effective intracellular drug delivery nanocarriers.

Advances in Multiple Stimuli-Responsive Drug-Delivery Systems for Cancer Therapy

Nanomedicines afford unique advantages in therapeutic intervention against tumors. However, conventional nanomedicines have failed to achieve the desired effect against cancers because of the presence of complicated physiological fluids and the tumor microenvironment. Stimuli-responsive drug-delivery systems have emerged as potential tools for advanced treatment of cancers. Versatile nano-carriers co-triggered by multiple stimuli in different levels of organisms (eg, extracorporeal, tumor tissue, cell, subcellular organelles) have aroused widespread interest because they can overcome sequential physiological and pathological barriers to deliver diverse therapeutic “payloads” to the desired targets. Furthermore, multiple stimuli-responsive drug-delivery systems (MSR-DDSs) offer a good platform for co-delivery of agents and reversing multidrug resistance. This review affords a comprehensive overview on the “landscape” of MSR-DDSs against tumors, highlights the design strategies of MSR-DDSs in recent years, discusses the putative advantage of oncotherapy or the obstacles that so far have hindered the clinical translation of MSR-DDSs.

Recent progress of redox-responsive polymeric nanomaterials for controlled release

This perspective focuses on the development of redox-responsive polymeric nanomaterials for controlled payload release within the last four years.

Reduction-responsive double hydrophilic block copolymer nano-capsule synthesized via RCMP-PISA

Double hydrophilic block copolymer vesicles synthesized via RCMP-PISA are degradable under a reductive conditions.

Redox responsive activity regulation in exceptionally stable supramolecular assembly and co-assembly of a protein

Supramolecular assembly of biomolecules/macromolecules stems from the desire to mimic complex biological structures and functions of living organisms. While DNA nanotechnology is already in an advanced stage, protein assembly is still in its infancy as it is a significantly difficult task due to their large molecular weight, conformational complexity and structural instability towards variation in temperature, pH or ionic strength. This article reports highly stable redox-responsive supramolecular assembly of a protein Bovine serum albumin (BSA) which is functionalized with a supramolecular structure directing unit (SSDU). The SSDU consists of a benzamide functionalized naphthalene-diimide (NDI) chromophore which is attached with the protein by a bio-reducible disulfide linker. The SSDU attached protein (NDI-BSA) exhibits spontaneous supramolecular assembly in water by off-set π-stacking among the NDI chromophores, leading to the formation of spherical nanoparticles (diameter: 150-200 nm). The same SSDU when connected with a small hydrophilic wedge (NDI-1) instead of the large globular protein, exhibits a different π-stacking mode with relatively less longitudinal displacement which results in a fibrillar network and hydrogelation. Supramolecular co-assembly of NDI-BSA and NDI-1 (3 : 7) produces similar π-stacking and an entangled 1D morphology. Both the spherical assembly of NDI-BSA or the fibrillar co-assembly of NDI-BSA + NDI-1 (3 : 7) provide sufficient thermal stability to the protein as its thermal denaturation could be completely surpassed while the secondary structure remained intact. However, the esterase like activity of the protein reduced significantly as a result of such supramolecular assembly indicating limited access by the substrate to the active site of the enzyme located in the confined environment. In the presence of glutathione (GSH), a biologically important tri-peptide, due to the cleavage of the disulfide bond, the protein became free and was released, resulting in fully regaining its enzymatic activity. Such supramolecular assembly provided excellent protection to the protein against enzymatic hydrolysis as the relative hydrolysis was estimated to be <30% for the co-assembled protein with respect to the free protein under identical conditions. Similar to bioactivity, the enzymatic hydrolysis also became prominent after GSH-treatment, confirming that the lack of hydrolysis in the supramolecularly assembled state is indeed related to the confinement of the protein in the nanostructure assembly.

Thiol-Disulfide Exchange Reaction Promoted Highly Efficient Cellular Uptake of Pyridyl Disulfide Appended Nonionic Polymers

The intracellular transport of molecules, macromolecules or materials is a key step in probing cellular structure and function, as well as regulating a plethora of physical and chemical events for treating disease. This communication reveals direct cellular uptake of pyridyl-disulfide (Py-Ds)-conjugated nonionic and biocompatible macromolecules with the aid of rapid exchange of the highly reactive Py-Ds groups with exofacial cell-surface thiols. Confocal microscopy and flow cytometry analysis confirmed highly efficient cellular uptake of Py-Ds-appended polymers (>50 % in 15 min) by avoiding lysosome as a consequence of thiol-disulfide exchange in the cell surface. In contrast, a control polymer lacking the Py-Ds group followed caveolae-mediated endocytosis. Other control polymers containing either the pyridine group (but not disulfide) or the disulfide group (but not pyridine) revealed significantly low cellular uptake, and thus essential role of the highly reactive Py-Ds group was established beyond doubt.

Dual-Functional Redox-Responsive Nanocarriers for Loading Phytohormone and Complexation with Heavy Metal Ions

This work focused on designing a novel redox-responsive nanocarrier synthesized from carboxymethyl-β-cyclodextrin-modified nanosilica, which could load and release plant hormones, such as salicylic acid (SA), in plant cells. When the SA-loaded nanoparticles cross the plant cell wall, the disulfide bond can be broken to form sulfhydryl groups under the action of reduced glutathione (GSH), thus releasing SA. Meanwhile, the resulting thiol groups exhibited strong affinity toward several heavy metal ions, mercury ions in particular, thus playing a role similar to phytochelatins for detoxification. The results of SA release in vitro proved that the release proceeded much faster in GSH-rich than in GSH-free environments. The adsorption behaviors of the redox-responsive nanoparticles toward heavy metal ions, after phytohormones release, were systematically investigated. Moreover, the synergetic effects on sustained release and metal ion capture enable the redox-responsive cyclodextrin-modified silica to be an effective and dual-functional nanocarrier that has great potential for agricultural applications.

Dual Reduction/Acid-Responsive Disassembly and Thermoresponsive Tunability of Degradable Double Hydrophilic Block Copolymer

We report a thermoresponsive double hydrophilic block copolymer degradable in response to dual reduction and acidic pH at dual locations. The copolymer consists of a poly(ethylene oxide) block covalently connected through an acid-labile acetal linkage with a thermoresponsive polymethacrylate block containing pendant oligo(ethylene oxide) and disulfide groups. The copolymer undergoes temperature-driven self-assembly in water to form nanoassemblies with acetal linkages at the core/corona interface and disulfide pendants in the core, exhibiting dual reduction/acid responses at dual locations. The physically assembled nanoaggregates are converted to disulfide-core-crosslinked nanogels through disulfide-thiol exchange reaction, retaining enhanced colloidal stability, yet degraded to water-soluble unimers upon reduction/acid-responsive degradation. Further, the copolymer exhibits improved tunability of thermoresponsive property upon the cleavage of junction acetal and pendant disulfide linkages individually and in combined manner. This work suggests that dual location dual reduction/acid-responsive degradation is a versatile strategy toward effective drug delivery exhibiting disulfide-core-crosslinking capability and disassembly as well as improved thermoresponsive tunability.

Glutathione and Reactive Oxygen Species Dual-Responsive Block Copolymer Prodrugs for Boosting Tumor Site-Specific Drug Release and Enhanced Antitumor Efficacy

A remarkable hallmark of cancer cells is the heterogeneous coexistence of overproduced intracellular glutathione (GSH) and a high level of reactive oxygen species (ROS) compared with those in normal cells, which have been frequently used as the stimuli to trigger drug release from the nanocarriers. Most of the stimuli-responsive delivery vehicles have been designed to respond to only one redox stimulus (e.g., GSH or ROS). Herein, we develop a GSH and ROS dual-responsive amphiphilic diblock copolymer prodrug (BCP) (GR-BCP) consisting of poly(ethylene glycol) (PEG)- and camptothecin (CPT)-conjugated poly(methacrylate) in the side chains via thioether bonds. In comparison, GSH or ROS single-responsive BCPs (G-BCPs or R-BCPs) were prepared, where CPT drugs were linked by disulfide or thioketal bonds, respectively. The three BCPs can form well-defined spherical micellar nanoparticles in an aqueous solution with a diameter of ∼50 nm. Compared with G-BCP and R-BCP, GR-BCP realized the highest cytotoxicity against HeLa cells with the half-inhibitory concentration (IC₅₀) of 6.3 μM, which is much lower than 17.8 μM for G-BCP and 28.9 μM for R-BCP. Moreover, for in vivo antitumor performance, G-BCP, R-BCP, and GR-BCP showed similar efficiencies in blood circulation and tumor accumulation after intravenous injection. However, GR-BCP realized the most efficient tumor suppression with few side effects. Our findings demonstrate that intracellular GSH and ROS dual-responsive BCPs show a more efficient responsive drug release inside tumor cells for boosting the antitumor efficacy as compared with GSH or ROS single-responsive BCPs, which provides novel strategies for designing redox-responsive BCPs.

Controlled Microfluidic Synthesis of Biological Stimuli-Responsive Polymer Nanoparticles

Microfluidic flow-directed self-assembly of biological stimuli-responsive block copolymers is demonstrated with dual-location cleavable linkages at the junction between hydrophilic and hydrophobic blocks and on pendant group within the hydrophobic blocks. On-chip self-assembly within a two-phase microfluidic reactor forms various "DualM" polymer nanoparticles (PNPs), including cylinders and multicompartment vesicles, with sizes and morphologies that are tunable with manufacturing flow rate. Complex kinetically trapped intermediates between shear-dependent states provide the most detailed mechanism to date of microfluidic PNP formation in the presence of flow-variable high shear. Glutathione (GSH)-triggered changes in PNP size and internal structure depend strongly on the initial flow-directed size and internal structure. Upon incubation in GSH, flow-directed PNPs with smaller average sizes showed a faster hydrodynamic size increase (attributed to junction cleavage) and those with higher excess Gibbs free energy showed faster inner compartment growth (attributed to pendant cleavage). These results demonstrate that the combination of chemical control of the location of biologically responsive linkages with microfluidic shear processing offers promising routes for tunable "smart" polymeric nanomedicines.

Disulfide chemistry in responsive aggregation of amphiphilic systems

The dynamic nature of the disulfide bond has enhanced the potential for disulfide based amphiphiles in the emerging biomedical field. Disulfide containing amphiphiles have extensively been used for constructing wide ranging soft nanostructures as potential candidates for delivery of drugs, proteins and genes owing to their degradable nature in the presence of intracellular glutathione (present in a many fold excess compared to the extracellular milieu). This degradable nature of amphiphiles is not only useful to deliver therapeutics but it also eliminates the toxicity issues associated with the carrier after delivery of such therapeutics. Therefore, these bioreducible and biocompatible nano-aggregates inspired researchers to use them as vehicles for therapeutic delivery and as a result the literature of disulfide containing amphiphiles has been intensified. This review article highlights the structural diversity in disulfide containing amphiphilic small molecule and polymeric systems, structural effects on their aqueous aggregation, redox-responsive disassembly and biological applications. Furthermore, the use of disulfide chemistry towards the design of cell penetrating polymers has also been discussed. Finally a brief perspective on some future opportunities of these systems is provided.

The synthesis of N,N′-disulfanediyl-bis(N′-((E)-benzylidene)acetohydrazide) from (E)-N′-benzylideneacetohydrazide and S8

Herein we report an oxidative coupling reaction for N–S/S–S bond formation from (E)-N′-benzylideneacetohydrazide and S₈ to furnish substituted N,N′-disulfanediyl-bis(N′-((E)-benzylidene) acetohydrazide). It provides a direct approach for the synthesis of disulfides with good yields.

Herein we report an oxidative coupling reaction for N–S/S–S bond formation substituted N,N′-disulfanediyl bis(N′-((E)-benzylidene)acetohydrazide). It provides a direct approach for the synthesis of disulfides with good yields.

Pyridyl disulfide-based thiol–disulfide exchange reaction: shaping the design of redox-responsive polymeric materials

This review provides an overview of synthetic approaches utilized to incorporate the thiol-reactive pyridyl-disulfide motif into various polymeric materials, and briefly highlights its utilization to obtain functional materials.

Development and disassembly of single and multiple acid-cleavable block copolymer nanoassemblies for drug delivery

Acid-degradable block copolymer-based nanoassemblies are promising intracellular candidates for tumor-targeting drug delivery as they exhibit the enhanced release of encapsulated drugs through their dissociation.

Hyperbranched polydisulfides

Synthesis, aqueous aggregation, hydrophobic guest encapsulation, non-covalent encapsulation stability and glutathione responsive degradation of amphiphilic hyperbranched polydisulfides have been reported.

Length effects of cylindrical polymer brushes on their in vitro and in vivo properties

Understanding the relationship between the morphology and biological performance of nanomaterials is very important for their biomedical applications. However, most of the published research focused on spherical systems. The biological properties of the anisotropic nanomaterials have not been studied enough. In this study, we synthesized three sets of cylindrical polymer brushes (CPBs) with different lengths (∼34, 60 and 119 nm) by taking advantage of controlled radical polymerization and Cu(i)-catalyzed alkyne-azide click chemistry. These CPBs had one-dimensional wormlike morphology, the same chemical structure and diameter, desirable water solubility, abundant amino groups and narrowly distributed lengths. These characteristics encouraged us to study length effects on their in vitro and in vivo properties. We demonstrated that longer CPBs had higher cellular uptake, lower tissue permeability, shorter blood circulation time, lower tumor accumulation and rapider body clearance than their shorter counterparts. This work might provide important guidance for the design of biomedical nanomaterials.