Tetrakis(ethyl-4(4-butyryl)oxyphenyl)porphyrinato zinc complexes with 4,4'-bpyridin: synthesis, characterization, and its catalytic degradation of Calmagite

New zinc(ii) metalloporphyrin: molecular structure, spectroscopic characterization, electrochemical sensing of dopamine, and catalytic dye degradation

This work is a continuation of the series of studies aimed at studying the electronic and structural properties of divalent metal porphyrin complexes, especially zinc(ii) metalloporphyrins. In this perspective, we have prepared the [Zn(TMPP)(4,4'-bpy)]·CHCl3 (I) coordination compound, where TMPP is the meso-tetra(para-methoxyphenyl)porphyrinate and 4,4'-bpy is the 4,4'-bipyridine. The UV/Vis, fluorescence, IR and 1H NMR spectroscopic techniques, ESI-HRMS mass spectrometry investigation as well as a single crystal X-ray diffraction study were used to characterize the title compound. Notably, we demonstrated the ability of this zinc(ii) metalloporphyrin to degrade the methylene blue (MB) dye, examining several influencing factors, including pH, temperature and initial dye concentration. Additionally, complex I exhibited remarkable efficiency in degrading MB under blue LED irradiation. Beyond catalytic applications, this compound was successfully employed as an electrochemical sensor for the detection of dopamine (DA) using the square wave voltammetry (SWV) method, showcasing its multifunctional capabilities.

Zero valent iron-electro-Fenton-peroxymonosulfate (ZVI-E-Fenton-PMS) process for industrial wastewater treatment

Advanced oxidation processes are frequently applied to a variety of refractory organic wastewater, but rarely is electro-Fenton combined with activated persulfate technology applied to the removal of refractory pollutants. In this work, the electro-Fenton process was combined with zero-valent iron (ZVI) activated peroxymonosulfate (PMS), two advanced oxidation processes based on different radicals, to form the ZVI-E-Fenton-PMS process to treat wastewater, whose main advantages are the generation of more reactive oxygen species and the reduction of oxidant cost to achieve rapid removal of pollutants. This process can not only produce H₂O₂ and activate PMS at the cathode, but also reduce Fe(iii) to realize the sustainable Fe(iii)/Fe(ii) redox cycle. The main reactive oxygen species in the ZVI-E-Fenton-PMS process were found to be ˙OH, SO₄˙^- and ¹O₂ by radical scavenging experiments and electron paramagnetic resonance (EPR), and the relative contributions of the three reactive oxygen species for the degradation of MB were estimated to 30.77%, 39.62% and 15.38%, respectively. Then, by calculating the ratio of the relative contributions of each component to the removal of pollutants at different PMS doses, it was found that the synergistic effect of the process was better when the proportion of ˙OH in the oxidation of reactive oxygen species (ROS) was higher and the proportion of non-ROS oxidation increased year-on-year. This study provides a new perspective on the combination of different advanced oxidation processes and reveals the advantages and potential of this process for application.

Cellulose Nanocrystals (CNCs) and Cellulose Nanofibers (CNFs) as Adsorbents of Heavy Metal Ions

The isolation of nanocellulose has been extensively investigated due to the growing demand for sustainable green materials. Cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs), which have the same chemical composition but have different morphology, particle size, crystallinity, and other properties depending on the precursor and the synthesis method used. In comparison, CNC particles have a short rod-like shape and have smaller particle dimensions when compared to CNF particles in the form of fibers. CNC synthesis was carried out chemically (hydrolysis method), and CNF synthesis was carried out mechanically (homogenization, ball milling, and grinding), and both can be modified because they have a large surface area and are rich in hydroxyl groups. Modifications were made to increase the adsorption ability of heavy metal ions. The Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric (TG), and dynamic light scattering (DLS) can reveal the characteristics and morphology of CNCs and CNFs. The success and effectiveness of the heavy metal adsorption process are influenced by a few factors. These factors include adsorbent chemical structure changes, adsorbent surface area, the availability of active sites on the adsorbent’s surface, adsorption constants, heavy metal ionic size differences, pH, temperature, adsorbent dosage, and contact time during the adsorption process. In this review, we will discuss the characteristics of CNCs and CNFs synthesized from various precursors and methods, the modification methods, and the application of CNCs and CNFs as heavy metal ion adsorbents, which includes suitable isotherm and kinetics models and the effect of pH on the selectivity of various types of heavy metal ions.

Facile construction of photocatalytic cellulose-based sponge with stable flotation properties as efficient and recyclable photocatalysts for sewage treatment

Dispersion and recycling of powdered nano-photocatalysts for water purification is still not an easy task. The self-supporting and floating photocatalytic cellulose-based sponges ware conveniently prepared by anchoring BiOX nanosheet arrays on cellulose-based sponge's surface. The introduction of sodium alginate into the cellulose-based sponge significantly enhanced the electrostatic adsorption of bismuth oxygen ions and promoted the formation of bismuth oxyhalide (BiOX) crystal nuclei. Among the photocatalytic cellulose-based sponges, the sponge (BiOBr-SA/CNF) modified with bismuth oxybromide displayed excellent photocatalytic ability for photodegrading 96.1 % rhodamine B within 90 min under 300 W Xe lamp irradiation (λ > 400 nm). The loading of bismuth oxybromide on cellulose-based sponge's surface improves the flotation stability of the cellulose-based sponge. Benefiting from excellent load fastness of bismuth oxybromide nanosheet and flotation stability of BiOBr-SA/CNF sponge, after 5 cycles of recycling, the photodegradation rates of BiOBr-SA/CNF sponge to rhodamine B remained above 90.2 % (90 min), and it also has excellent photocatalytic degradation effect on methyl orange and herbicide isoproteron. This work may provide a convenient and efficient method to construct self-supporting and floating photocatalytic sponges using cellulose based materials as substrates for sewage treatment.

Chemical modification of microcrystalline cellulose with polyethyleneimine and hydrazine: Characterization and evaluation of its adsorption power toward anionic dyes

Functionalization and various applications of biomaterials have progressively gained a major interest due to the cost-effectiveness, renewability, and biodegradability of these substrates. The current work focalized on the functionalization of microcrystalline cellulose with polyethyleneimine solution (3 %, 5 %, and 10 %) and hydrazine sulfate salt (1:1, 1:2, 2:1) using an impregnation method. Untreated and treated samples were characterized using FT-IR, SEM, XRD, TGA, and DTA analyses. The crystallinity index values for control microcrystalline cellulose, cellulose-polyethyleneimine, and cellulose-hydrazine were 57.13.8 %, 57.29 %, and 52.62 %, respectively. Cellulose-polyethyleneimine (5 %) and cellulose-hydrazine (1:1) displayed the highest adsorption capacities for calmagite (an anionic dye). At equilibrium, the maximum adsorption capacities for calmagite achieved 104 mg/g for cellulose-polyethyleneimine (5 %), 45 mg/g for cellulose-hydrazine (1:1), and only 12.4 mg/g for untreated cellulose. Adsorption kinetics complied well with the pseudo-second-order kinetic model. The adsorption isotherm fitted well with the Langmuir isotherm. Overall, the functionalized cellulosic samples could be considered potential materials for the treatment of contaminated waters.

Hydrogen Evolution Reaction, Electrochemical CO2 Reduction, and Oxidative Photodegradation of Organic Dyes Catalyzed by Co(II) Trimethoxy-Meso-Arylporphyrin

In search of robust catalysts for redox transformations such as the hydrogen evolution reaction (HER) or CO2 to CO reduction, we stepped on the previously reported meso-tetrakis(3,4,5-trimethoxyphenyl)porphyrinato cobalt(II) complex [Co(TTMPP)]. We prepared [Co(TTMPP)] in good yields and characterized it by IR, UV-vis absorption, photoluminescence spectroscopy, and cyclic voltammetry (CV). The [Co(TTMPP)] was used as a homogeneous catalyst for the electrochemical formation of H2 (HER) in DMF (N,N’-dimethylformamide)/TFA (trifluoroacetic acid) and DMF/EtN3BF4 solutions, with high faradic efficiencies (FE). Additionally, the reduction of CO2 to CO in DMF under a CO2 atmosphere was catalyzed in DMF/TFE (TFE = 2,2,2-trifluoroethanol) and DMF/PhOH with high FE and only traces of H2 as a by-product. Turnover frequencies of 15.80 or 9.33 s−1, respectively were determined from CV experiments or controlled potential electrolysis in the presence of 1eq. TFE. They were lower with PhOH as proton source with 13.85 or 8.31 s−1, respectively. Further, [Co(TTMPP)] as a solid catalyst (suspension) allowed the photodecomposition of the organic dyes methylene blue (MB) and rhodamine B (RhB) using H2O2 under visible light irradiation. The photocatalyst was photostable over five cycles. A photocatalytic mechanism was proposed based on trapping experiments of reactive oxygen species.

Synthesis and characterization of a new meso-tetrakis (2,4,6-trimethylphenyl) porphyrinto) zinc(II) supported sodium alginate gel beads for improved adsorption of methylene blue dye

Chemical modification of a biopolymer offers a simple strategy to realize new materials with added benefits. In this paper, meso-tetrakis(2,4,6-trimethylphenyl) porphyrinto) zinc(II) supported sodium alginate gel beads were successfully prepared, characterized, and used for the removal of a cationic dye from aqueous solution. The chemical structure of the prepared composite beads was confirmed by FT-IR, SEM, XRD and TGA/DTG techniques. Analytical data suggested that the sodium alginate beads and meso-tetrakis(2,4,6-trimethylphenyl) porphyrinto) zinc(II) complex interacted via non-covalent interaction (H-bonding) mode. The morphological micrographs showed spherical and smooth composite beads. The crosslinking of hydroxyl and carboxylate groups of the biopolymer with calcium ions and the incorporation of meso-tetrakis(2,4,6-trimethylphenyl) porphyrinto) zinc(II) into alginate matrix resulted in a small decrease of residual mass. The maximum adsorption capacities of methylene blue, at 20 °C, were found to be 52.3 mg/g and 34.8 mg/g for sodium alginate composite beads (3%) and plain sodium alginate beads, respectively. The adsorption process followed Freundlich isotherm and pseudo second order kinetics. The thermodynamic study displayed an exothermic and non-spontaneous process.

Control of Photoinduced Electron Transfer Using Complex Formation of Water-Soluble Porphyrin and Polyvinylpyrrolidone

Inspired by the natural photosynthetic system in which proteins control the electron transfer from electron donors to acceptors, in this research, artificial polymers were tried to achieve this control effect. Polyvinylpyrrolidone (PVP) was found to form complex with pigments 5,10,15,20-tetrakis-(4-sulfonatophenyl) porphyrin (TPPS) and its zinc complex (ZnTPPS) quantitatively through different interactions (hydrogen bonds and coordination bonds, respectively). These complex formations hinder the interaction between ground-state TPPS or ZnTPPS and an electron acceptor (methyl viologen, MV2+) and could control the photoinduced electron transfer from TPPS or ZnTPPS to MV2+, giving more electron transfer products methyl viologen cationic radical (MV+•). Other polymers such as PEG did not show similar results, indicating that PVP plays an important role in controlling the photoinduced electron transfer.

CO2 to CO Electroreduction, Electrocatalytic H2 Evolution, and Catalytic Degradation of Organic Dyes Using a Co(II) meso-Tetraarylporphyrin

The meso-tetrakis(4-(trifluoromethyl)phenyl)porphyrinato cobalt(II) complex [Co(TMFPP)] was synthesised in 93% yield. The compound was studied by 1H NMR, UV-visible absorption, and photoluminescence spectroscopy. The optical band gap Eg was calculated to 2.15 eV using the Tauc plot method and a semiconducting character is suggested. Cyclic voltammetry showed two fully reversible reduction waves at E1/2 = -0.91 V and E1/2 = -2.05 V vs. SCE and reversible oxidations at 0.30 V and 0.98 V representing both metal-centred (Co(0)/Co(I)/Co(II)/Co(III)) and porphyrin-centred (Por2-/Por-) processes. [Co(TMFPP)] is a very active catalyst for the electrochemical formation of H2 from DMF/acetic acid, with a Faradaic Efficiency (FE) of 85%, and also catalysed the reduction of CO2 to CO with a FE of 90%. Moreover, the two triarylmethane dyes crystal violet and malachite green were decomposed using H2O2 and [Co(TMFPP)] as catalyst with an efficiency of more than 85% in one batch.

Enhanced total flavonoid accumulation and alleviated growth inhibition of germinating soybeans by GABA under UV-B stress

Germination of soybeans under ultraviolet-B (UV-B) treatment is a simple and effective way to enrich soybean isoflavones, but its mechanism of action is not yet clear. G-Aminobutyric acid (GABA) is a signaling molecule that is involved in the accumulation of secondary metabolites as well as the regulation of plant development and metabolism. In this study, the effects of exogenous GABA and its inhibitors on the physiological and biochemical, antioxidant systems, total flavonoid content, activity and gene expression of isoflavone metabolism related enzyme in germinating soybeans under UV-B treatment were investigated. Compared to UV-B treatment alone, soybean treated with GABA (5 mM) in combination with UV-B significantly increased sprout length, fresh weight, Ca2+ inward flow and peroxidase and catalase activities, and decreased malondialdehyde and H2O2 and O2˙- fluorescence intensity, while soybean treated with GABA inhibitor showed the opposite trend. Meanwhile, total flavonoid content increased by 11.2% and 6.7%, respectively, in 2- and 4 day-old soybeans under UV-B treatment, compared to UV-B treatment alone. Moreover, the application of GABA under UV treatment significantly increased the activity of phenylalanine ammonia-lyase and cinnamic acid-4-hydroxylase, with values increasing by 43.6% and 18.5%, respectively, in four-day-old soybean compared to UV treatment alone, which also increased the relative expression of key genes involved in isoflavone metabolism. The GABA inhibitor 3-mercaptopropionic acid blocked these occurrences. According to this research, GABA could operate as a signaling molecule to mediate isoflavone accumulation in soybean sprouts under UV radiation and stimulate soybean sprout growth.

A new cobalt(ii) meso-porphyrin: synthesis, characterization, electric properties and application in the catalytic degradation of dyes

In this work, a new porphyrin, 5,10,15,20-tetrakis{4-[((4-methoxyphenyl)acetyl)oxy]phenyl}porphyrin (H₂TMAPP) (1), and its cobalt complex [Co^II(TMAPP)] (2) were synthesized in good and quantitative yields, respectively. The chemical structures of these synthesized compounds were confirmed by FT-IR, ¹H NMR, MS, UV-visible, and fluorescence spectroscopy. Their photophysical properties, namely their molar extinction coefficients (∑), fluorescence quantum yields (Φ_f) and lifetimes (τ_f), were determined and compared with those of meso-tetraphenylporphyrin. Furthermore, their electrochemical behaviours were examined using cyclic voltammetry (CV). Dielectric properties such as the conductivity (σ) and the real (M′) and imaginary (M′′) parts of the dielectric modulus were investigated as a function of temperature and frequency. The impedance analysis was carried out using Cole–Cole plots to elucidate the electrical conduction mechanism. The catalytic power and the adsorption properties of the prepared compounds were studied for methylene blue (MB) and crystal violet (CV) degradation. The results reveal that the studied compound [Co^II(TMAPP)] can be used as a catalyst for the decolourisation of dyes in the presence of H₂O₂.

In this work, a new porphyrin, 5,10,15,20-tetrakis{4-[((4-methoxyphenyl)acetyl)oxy]phenyl}porphyrin (H₂TMAPP) (1), and its cobalt complex [Co^II(TMAPP)] (2) were synthesized in good and quantitative yields, respectively.

Impact of photosensitizer orientation on the distance dependent photocatalytic activity in zinc phthalocyanine-nanoporous gold hybrid systems

Nanoporous gold powder was functionalized in a two-step approach by an azide terminated alkanethiol self-assembled monolayer (SAM) and a zinc(ii) phthalocyanine (ZnPc) derivative by copper catalyzed azide-alkyne cycloaddition (CuAAC). A series of different hybrid systems with systematic variation of the alkyl chain length on both positions, the alkanethiol SAM and the peripheral substituents of the ZnPc derivative, was prepared and studied in the photooxidation of diphenylisobenzofuran (DPBF). An enhancement by nearly one order of magnitude was observed for the photosensitized singlet oxygen (1O2) generation of the hybrid systems compared to the same amount of ZnPc in solution caused by the interaction of the npAu surface plasmon resonance and the excited state of the immobilized sensitizer. This interaction was shown to be distance dependent, with decreasing activity for short SAMs with alkyl chain lengths < 6 methylene groups caused by quenching of the excited state via electron transfer as well as decreasing activity for SAMs with n > 8 methylene groups due to decreasing energy transfer for long distances. An unexpected distance dependent behaviour was observed for the variation of the peripheral alkyl chain on the photosensitizer revealing a planar orientation of the immobilized photosensitizer on the nanoporous gold surface by a penta-coordinated central zinc ion through interaction with free azide groups from the self-assembled monolayer.

Zinc(ii) triazole meso-arylsubstituted porphyrins for UV-visible chloride and bromide detection. Adsorption and catalytic degradation of malachite green dye

Three new triazole meso-arylporphyrins (4a-c) were synthesized by the copper(i)-catalyzed azide alkyne cycloaddition (CuAAC) "click" reaction in high yield. The corresponding zinc(ii) coordination compounds (5a-c) have also been prepared. All 4a-c and 5a-c porphyrin species were fully characterized by elemental analysis, electrospray ionization and MALDI-TOF mass spectrometry, infrared spectroscopy, proton nuclear magnetic resonance, UV-visible, fluorescence and cyclic voltammetry. The zinc(ii) 5a-c complexes have been tested as detectors for Cl- and Br- anions. UV-visible titrations reveal that these host systems exhibit strong anion binding affinities. The efficiency of the adsorption of the malachite green dye (MG) dye on the 4a-c free base porphyrins and the corresponding zinc(ii) complexes 5a-c was investigated by a kinetic study using these synthetic porphyrin derivatives as adsorbents. The use of our triazole Zn(ii) complexes in the catalytic degradation of the MG dye is the first example where a metalloporphyrin is involved in the MG dye decolorization reaction. The degradation reactions were carried out using an ecological oxidant (H2O2), where the efficiency of the decolorization has been characterized by UV-visible spectroscopic analysis. Several factors affecting the degradation phenomenon have been studied. The energetic parameters concerning the degradation process have also been determined.

Effect of the coordination of π-acceptor 4-cyanopyridine ligand on the structural and electronic properties ofmeso-tetra(para-methoxy) andmeso-tetra(para-chlorophenyl) porphyrin cobalt(ii) coordination compounds. Application in the catalytic degradation of methylene blue dye

To examine the influence of both the important π-acceptor character of the 4-cyanopyridine ligand and the nature of the para-substituted phenyls of meso-porphyrins on the electronic, electrochemical and structural properties of cobaltous metalloporphyrins, we prepared and fully characterized two coordination compounds: the (4-cyanopyridine)[meso-tetra(para-methoxyphenyl)porphyrinato]cobalt(ii) and the (4-cyanopyridine)[meso-tetra(para-chlorophenyl)porphyrinato]cobalt(ii) with the [Co^II(TMPP)(4-CNpy)] and [Co^II(TClPP)(4-CNpy)] formulas (complexes 1–2). The solution structures of compounds 1–2 were confirmed by ¹H NMR spectroscopy and mass spectrometry methods. They were further characterized by cyclic voltammetry and photoluminescence studies. The X-ray molecular structure data show that the Co-TClPP-4-NCpy derivative (2) exhibits high ruffling deformation compared to that of the Co-TMPP-4-CNpy species (1). Notably, the crystal packing of complex 1 shows the formation of Co⋯Co supramolecular dimers with a distance of 5.663 Å. As an application of our two cobaltous compounds, an investigation involving complexes 1–2 in the degradation of the methylene blue dye in the presence and absence of H₂O₂ in aqueous solutions was carried out. These promising results show that 1–2 can be used as catalysts in the degradation processes of dyes.

Preparation and UV/vis, IR, MS, ¹H NMR, cyclic voltammetry and molecular structures of two new Co(ii) complexes with para-methoxy-phenyl and para-chloro meso-porphyrins and 4-cyanopyridine ligand (1–2). Catalytic oxidation data of MB dye using 1–2.

Facile preparation of low-cost HKUST-1 with lattice vacancies and high-efficiency adsorption for uranium

In this work, we prepared HKUST-1 and HKUST-1 with lattice vacancies (HLV) using benzoic acid (BA) as a low-cost modulator to replace part of the traditional trimesic acid ligand (H3BTC). The structure and morphology of the products were characterized by FTIR, XRD, SEM and XPS. The adsorption performance of the products for uranium from aqueous solutions was investigated. The results showed that the sorption of U(vi) on HKUST-1 and HLV agreed with the Langmuir isotherm model (R HKUST-1 2 = 0.9867 and R HLV 2 = 0.9828) and the maximum adsorption capacity was 430.98 mg g-1 and 424.88 mg g-1, respectively. According to kinetics studies, the adsorption fitted better with a pseudo-second-order model (R HKUST-1 2 = 1.0000 and R HLV 2 = 0.9978). The as-prepared adsorbents were used for the removal of uranium from real water samples as well. The results showed that HLV with lower cost is a promising adsorbent for uranium from aqueous solutions.

A green l-cysteine modified cellulose nanocrystals biosorbent for adsorption of mercury ions from aqueous solutions

Using a green biosorbent to remove toxic mercury ions from aqueous solutions is a significant undertaking. In the present study, a novel biosorbent, l-cysteine modified cellulose nanocrystals (Lcys-CNCs), was prepared by functionalizing high surface area cellulose nanocrystals with l-cysteine through periodate oxidation and reductive amination reaction. Lcys-CNCs were characterized by FT-IR, ¹³C CP-MAS NMR, elemental analysis, XPS, zeta potential and SEM. As cellulose nanocrystals are the natural nanomaterial, and l-cysteine contains strong mercury chelating groups, Lcys-CNCs show excellent adsorption capacity for mercury ions. The experimental conditions such as pH, contact time, and initial mercury ion concentration are discussed. The pseudo-second order model can describe the removal kinetics of Hg(ii) more accurately than the pseudo-first order model. The adsorption isotherm study of Hg(ii) followed the Langmuir model of monolayer adsorption. The maximum uptake capacity of Lcys-CNCs was determined to be 923 mg g⁻¹. Lcys-CNCs can remove mercury ions with 93% removal efficiency within 5 min from a 71 mg L⁻¹ solution. For Cd(ii), Pb(ii), Cu(ii) and Zn(ii) ions, Lcsy-CNCs can selectively adsorb Hg(ii) ions and the removal efficiency is 87.4% for Hg(ii). This study suggests Lcsy-CNCs are a green and highly efficient biosorbent for adsorption of mercury ions from aqueous solutions.

A green biosorbent, l-cysteine modified cellulose nanocrystals, was successfully synthesized and applied to adsorb mercury ions from aqueous solutions.

Utilization of modified Dioscorea opposita Thunb. as a novel biosorbent for the adsorption of indigo carmine in aqueous solutions

It is important to identify efficient adsorbents for the removal of dyestuffs from aqueous solutions as this kind of pollution becomes more extensive. In this study, Dioscorea opposita Thunb. (DOT) was modified with polyethylene imine (DOT@PEI) as a novel biosorbent to remove the typical anionic dye indigo carmine (IC) from wastewater. The modified DOT@PEI biosorbent was characterized using BET (Brunauer–Emmett–Teller), SEM (scanning electron microscopy), EDS (energy dispersive spectroscopy), and FTIR (Fourier transform infrared spectroscopy) methods, and the results demonstrated that DOT@PEI is an excellent biosorbent. Batch adsorption studies showed that optimum adsorption parameters were pH 2.0, 1.0 g L⁻¹ dosage, and temperature of 20 °C. The isothermal adsorption data showed good fitting to the Langmuir model, with a maximum adsorption capability of 344.83 mg g⁻¹ for IC. Kinetic experiments showed that the experimental data fitted well to a pseudo-second-order kinetic model and the thermodynamic parameters indicated that adsorption is a spontaneous exothermic process. Adsorption–desorption experiments illustrated the good regeneration capability of DOT@PEI. These results demonstrate that DOT@PEI can be used as an effective biosorbent in water for the removal of anionic dyes such as required for environmental applications.

It is important to identify efficient adsorbents for the removal of dyestuffs from aqueous solutions as this kind of pollution becomes more extensive.