Aryl fluoride functionalized graphene oxides for excellent room temperature ammonia sensitivity/selectivity

Facile Graphene Oxide Modification Method via Hydroxyl-yne Click Reaction for Ultrasensitive and Ultrawide Monitoring Pressure Sensors

Enhancing the durability and functionality of existing materials through sustainable pathways and appropriate structural design represents a time- and cost-effective strategy for the development of advanced wearable devices. Herein, a facile graphene oxide (GO) modification method via the hydroxyl-yne click reaction is present for the first time. By the click coupling between propiolate esters and hydroxyl groups on GO under mild conditions, various functional molecules are successfully grafted onto the GO. The modified GO is characterized by FTIR, XRD, TGA, XPS, and contact angle, proving significantly improved dispersibility in various solvents. Besides the high efficiency, high selectivity, and mild reaction conditions, this method is highly practical and accessible, avoiding the need for prefunctionalizations, metals, or toxic reagents. Subsequently, a rGO-PDMS sponge-based piezoresistive sensor developed by modified GO-P2 as the sensitive material exhibits impressive performance: high sensitivity (335 kPa-1, 0.8-150 kPa), wide linear range (>500 kPa), low detection limit (0.8 kPa), and long-lasting durability (>5000 cycles). Various practical applications have been demonstrated, including body joint movement recognition and real-time monitoring of subtle movements. These results prove the practicality of the methodology and make the rGO-PDMS sponge-based pressure sensor a real candidate for a wide array of wearable applications.

Recent Advances in Nanostructured Materials for Application as Gas Sensors

Many different industries, including the pharmaceutical, medical engineering, clinical diagnostic, public safety, and food monitoring industries, use gas sensors. The inherent qualities of nanomaterials, such as their capacity to chemically or physically adsorb gas, and their great ratio of surface to volume make them excellent candidates for use in gas sensing technology. Additionally, the nanomaterial-based gas sensors have excellent selectivity, reproducibility, durability, and cost-effectiveness. This Review article offers a summary of the research on gas sensor devices based on nanomaterials of various sizes. The numerous nanomaterial-based gas sensors, their manufacturing procedures and sensing mechanisms, and most recent advancements are all covered in detail. In addition, evaluations and comparisons of the key characteristics of gas sensing systems made from various dimensional nanomaterials were done.

Evaluation of the Synergistic Effect of Graphene Oxide Sheets and Co3O4 Wrapped with Vertically Aligned Arrays of Poly (Aniline-Co-Melamine) Nanofibers for Energy Storage Applications

In the present study, Co₃O₄ and graphene oxide (GO) are used as reinforcement materials in a copolymer matrix of poly(aniline-co-melamine) to synthesize ternary composites. The nanocomposite was prepared by oxidative in-situ polymerization and used as an electrode material for energy storage. The SEM images revealed the vertically aligned arrays of copolymer nanofibers, which entirely wrapped the GO sheets and Co₃O₄ nanoparticles. The EDX and mapping analysis confirmed the elemental composition and uniform distribution in the composite. The XRD patterns unveiled composites’ phase purity and crystallinity through characteristic peaks appearing at their respective 2θ values in the XRD spectrum. The FTIR spectrums endorse the successful synthesis of composites, whereas TGA analysis revealed the higher thermal stability of composites. The cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy are employed to elucidate the electrochemical features of electrodes. The ternary composite PMCoG-2 displayed the highest specific capacity of 134.36 C/g with 6 phr of GO, whereas PMCoG-1 and PMCoG-3 exhibited the specific capacities of 100.63 and 118.4 C/g having 3 phr and 12 phr GO at a scan rate of 0.003 V/s, respectively. The best electrochemical performance of PMCoG-2 is credited to the synergistic effect of constituents of the composite material.

UV illumination-enhanced ultrasensitive ammonia gas sensor based on (001)TiO2/MXene heterostructure for food spoilage detection

Ammonia has been used as an important marker to indicate the extent of food spoilage. However, current gas sensors for ammonia suffer from either insufficient sensitivity and selectivity or unsatisfactory levels of automation, impeding their practical application for on-site and real-time monitoring of food quality. To overcome these limitations, we propose here the design of a sensing material by in-situ growing (001)TiO₂ onto a two-dimensional transition-metal carbide (Ti₃C₂T_x, MXene). In this design, TiO₂ with a highly active (001) crystal plane provides efficient photogeneration under UV irradiation, while Ti₃C₂T_x can store holes through Schottky junction formed at the interface with TiO₂, which greatly promotes the separation of electron-hole pairs, thereby enhancing ammonia sensing performance. By further introducing UV light for electron excitation, the (001)TiO₂/Ti₃C₂T_x based sensor shows 34 times higher sensitivity for ammonia (30 ppm) than that of Ti₃C₂T_x. The density functional theory further revealed that the (001) plane of TiO₂ and Ti₃C₂T_x composite configuration exhibited the highest adsorption affinity towards ammonia. Finally, an integrated circuit alarm system including near-field communication and a micro-controller system was designed to detect the decay process of fresh pork, fish, and shrimp. We believe such a sensing technology holds great promise in food quality monitoring.

Synthesis of sorafenib analogues incorporating a 1,2,3-triazole ring and cytotoxicity towards hepatocellular carcinoma cell lines

A series of 1,2,3-triazole-containing Sorafenib analogues, in which the aryl urea moiety of Sorafenib (1) was replaced with a 1,2,3-triazole ring linking a substituted phenoxy fragment, were prepared successfully via Huisgen 1,3-dipolar cycloaddition and nucleophilic aromatic substitution. The studies of cytotoxicity towards human hepatocellular carcinoma (HCC) cell lines, HepG2 and Huh7, indicated that p-tert-butylphenoxy analogue 2m showed significant inhibitory activity against Huh7 with IC₅₀ = 5.67 ± 0.57 µM. More importantly, 2m showed low cytotoxicity against human embryonal lung fibroblast cell line, MRC-5, with IC₅₀ > 100 µM, suggesting its highly selective cytotoxic activity (SI > 17.6) towards Huh7 which is much superior to that of Sorafenib (SI = 6.73). The molecular docking studies revealed that the analogue 2m bound B-RAF near the binding position of Sorafenib, while it interacted VEGFR2 efficiently at the same binding position of Sorafenib. However, 2m exhibited moderate inhibitory activity toward B-RAF, implying that its anti-Huh7 effect might not strictly relate to inhibition of B-RAF. Wound healing and BrdU cell proliferation assays confirmed anti-cell migration and anti-cell proliferative activities towards Huh7. With its inhibitory efficiency and high safety profile, 2m has been identified as a promising candidate for the treatment of HCC.

Recent Advances in Ammonia Gas Sensors Based on Carbon Nanomaterials

This review paper is devoted to an extended analysis of ammonia gas sensors based on carbon nanomaterials. It provides a detailed comparison of various types of active materials used for the detection of ammonia, e.g., carbon nanotubes, carbon nanofibers, graphene, graphene oxide, and related materials. Different parameters that can affect the performance of chemiresistive gas sensors are discussed. The paper also gives a comparison of the sensing characteristics (response, response time, recovery time, operating temperature) of gas sensors based on carbon nanomaterials. The results of our tests on ammonia gas sensors using various techniques are analyzed. The problems related to the recovery of sensors using various approaches are also considered. Finally, the impact of relative humidity on the sensing behavior of carbon nanomaterials of various different natures was estimated.

Ti3C2 MXene-Based Sensors with High Selectivity for NH3 Detection at Room Temperature

In this study, from experiments and theoretical calculation, we reported that Ti₃C₂ MXene can be applied as sensors for NH₃ detection at room temperature with high selectivity. Ti₃C₂ MXene, a novel two-dimensional carbide, was prepared by etching off Al atoms from Ti₃AlC₂. The as-prepared multilayer Ti₃C₂ MXene powders were delaminated to a single layer by intercalation and ultrasonic dispersion. The colloidal suspension of single-layer Ti₃C₂-MXene was coated on the surface of ceramic tubes to construct sensors for gas detection. Thereafter, the sensors were used to detect various gases (CH₄, H₂S, H₂O, NH₃, NO, ethanol, methanol, and acetone) with a concentration of 500 ppm at room temperature. Ti₃C₂ MXene-based sensors have high selectivity to NH₃ compared with other gases. The response to NH₃ was 6.13%, which was four times the second highest response (1.5% to ethanol gas). To understand the high selectivity, first-principles calculations were conducted to explore adsorption behaviors. From adsorption energy, adsorbed geometry, and charge transfer, it was confirmed that Ti₃C₂ MXene theoretically has a high selectivity to NH₃, compared with other gases in this experiment. Moreover, the response of the sensor to NH₃ increased almost linearly with NH₃ concentration from 10 to 700 ppm. The humidity tests and cycle tests of NH₃ showed that the Ti₃C₂ MXene-based gas sensor has excellent performances for NH₃ detection at room temperature.

Ag-doped ZnO nanorods embedded reduced graphene oxide nanocomposite for photo-electrochemical applications

In this paper, the Ag-doped zinc oxide nanorods embedded reduced graphene oxide (ZnO:Ag/rGO) nanocomposite was synthesized for photocatalytic degradation of methyl orange (MO) in the water. The microstructural results confirmed the successful decoration of Ag-doped ZnO nanorods on rGO matrix. The photocatalytic properties, including photocatalytic degradation, charge transfer kinetics and photocurrent generation, are systematically investigated using electrochemical impedance spectroscopy (EIS), photocurrent transient response (PCTR) and open circuit voltage decay (OCVD). The results of photocatalytic dye degradation measurements indicated that ZnO:Ag/rGO nanocomposite is more effective than pristine ZnO to degrade the MO dye, and the degradation rate reached 40.6% in 30 min. The decomposition of MO with ZnO:Ag/rGO nanostructure followed first-order reaction kinetics with a reaction rate constant (K a) of 0.01746 min-1. The EIS, PCTR and OCVD measurements revealed that the Ag doping and incorporation of rGO could suppress the recombination probability in ZnO by the separation of photo-generated electron-hole pairs, which leads to the enhanced photocurrent generation and photocatalytic activity. The photocurrent density of ZnO:Ag/rGO, ZnO/rGO and pristine ZnO are 206, 121.4 and 88.8 nA cm-2, respectively.

The effects of amino substituents on the enhanced ammonia sensing performance of PcCo/rGO hybrids

Three new room temperature reversible ammonia gas sensors were fabricated using PcCo/rGO hybrids with cost-efficient, highly sensitive and stable sensing performance.

Organic semiconductor/graphene oxide composites as a photo-anode for photo-electrochemical applications

An intimate physical mixture of graphene oxide (GO) and semiconducting organic molecules like bromophenathrene (BrPh) and bromopyrene (BrPy) was prepared by using a ball milling technique. The structural, microstructural, physical and chemical properties of the mixtures (20 wt% of GO) were analyzed by X-ray diffraction, SEM, FT-IR, TGA and TCSPC studies. Furthermore, the electrochemical properties like AC electrical conductivity, transient photocurrent response (PCTR) and open circuit voltage (OCVD) of the samples were analyzed. It has been observed from TCSPC and OCVD measurements that 20 wt% of GO in the semiconductor composite leads to an enhanced life-time of photo-generated charge carriers. The physical mixture composites exhibit a higher photocurrent than pure BrPh and BrPy.

New organic materials with longer life-times of the charge carrier and enhancement of photocurrent generation were developed.