Fabrication of a novel whole tissue-engineered intervertebral disc for intervertebral disc regeneration in the porcine lumbar spine

Design principles in mechanically adaptable biomaterials for repairing annulus fibrosus rupture: A review

Annulus fibrosus (AF) plays a crucial role in the biomechanical loading of intervertebral disc (IVD). AF is difficult to self-heal when the annulus tears develop, because AF has a unique intricate structure and biologic milieu in vivo. Tissue engineering is promising for repairing AF rupture, but construction of suitable mechanical matching devices or scaffolds is still a grand challenge. To deeply know the varied forces involved in the movement of the native annulus is highly beneficial for designing biomimetic scaffolds to recreate the AF function. In this review, we overview six freedom degrees of forces and adhesion strength on AF tissue. Then, we summarize the mechanical modalities to simulate related forces on AF and to assess the characteristics of biomaterials. We finally outline some current advanced techniques to develop mechanically adaptable biomaterials for AF rupture repair.

Reducing plastic pollution caused by demersal fisheries

Marine microplastics generated by wear and tear of bottom trawls and demersal seines during their service life is a growing environmental concern that requires immediate attention. In Norway, these fishing gears account for more than 70 % of the landings of demersal fish species, but they are also the leading sources of microplastics generated by fisheries. Because these two fishing gears are widely used around the world, replacing fossil-based non-degradable plastics with more abrasion-resistant materials, including biodegradable polymers, should contribute to the reduction of marine litter and its associated environmental impacts. However, the lack of available recycling techniques and the need for separate collection of biodegradable polymers means that these materials will most likely be incinerated for energy recovery, which is not favourable from a circular economy perspective. Nonetheless, from an environmental perspective the use of such biodegradable polymers in demersal fisheries could still be a better alternative to standard polymer materials.

The role of biomechanical factors in models of intervertebral disc degeneration across multiple length scales

Low back pain is the leading cause of disability, producing a substantial socio-economic burden on healthcare systems worldwide. Intervertebral disc (IVD) degeneration is a primary cause of lower back pain, and while regenerative therapies aimed at full functional recovery of the disc have been developed in recent years, no commercially available, approved devices or therapies for the regeneration of the IVD currently exist. In the development of these new approaches, numerous models for mechanical stimulation and preclinical assessment, including in vitro cell studies using microfluidics, ex vivo organ studies coupled with bioreactors and mechanical testing rigs, and in vivo testing in a variety of large and small animals, have emerged. These approaches have provided different capabilities, certainly improving the preclinical evaluation of these regenerative therapies, but challenges within the research environment, and compromises relating to non-representative mechanical stimulation and unrealistic test conditions, remain to be resolved. In this review, insights into the ideal characteristics of a disc model for the testing of IVD regenerative approaches are first assessed. Key learnings from in vivo, ex vivo, and in vitro IVD models under mechanical loading stimulation to date are presented alongside the merits and limitations of each model based on the physiological resemblance to the human IVD environment (biological and mechanical) as well as the possible feedback and output measurements for each approach. When moving from simplified in vitro models to ex vivo and in vivo approaches, the complexity increases resulting in less controllable models but providing a better representation of the physiological environment. Although cost, time, and ethical constraints are dependent on each approach, they escalate with the model complexity. These constraints are discussed and weighted as part of the characteristics of each model.

Biomechanical evaluation of a novel repair strategy for intervertebral disc herniation in an ovine lumbar spine model

Following herniation of the intervertebral disc, there is a need for advanced surgical strategies to protect the diseased tissue from further herniation and to minimize further degeneration. Accordingly, a novel tissue engineered implant for annulus fibrosus (AF) repair was fabricated via three-dimensional fiber deposition and evaluated in a large animal model. Specifically, lumbar spine kinetics were assessed for eight (n = 8) cadaveric ovine lumbar spines in three pure moment loading settings (flexion-extension, lateral bending, and axial rotation) and three clinical conditions (intact, with a defect in the AF, and with the defect treated using the AF repair implant). In ex vivo testing, seven of the fifteen evaluated biomechanical measures were significantly altered by the defect. In each of these cases, the treated spine more closely approximated the intact biomechanics and four of these cases were also significantly different to the defect. The same spinal kinetics were also assessed in a preliminary in vivo study of three (n = 3) ovine lumbar spines 12 weeks post-implantation. Similar to the ex vivo results, functional efficacy of the treatment was demonstrated as compared to the defect model at 12 weeks post-implantation. These promising results motivate a future large animal study cohort which will establish statistical power of these results further elucidate the observed outcomes, and provide a platform for clinical translation of this novel AF repair patch strategy. Ultimately, the developed approach to AF repair holds the potential to maintain the long-term biomechanical function of the spine and prevent symptomatic re-herniation.

Influence of structural and material property uncertainties on biomechanics of intervertebral discs - Implications for disc tissue engineering

This study investigated how variations of structural and material properties of human intervertebral discs (IVDs) affect the biomechanical responses of the IVDs under simulated physiological loading conditions using a stochastic finite element (SFE) model. An SFE method, which combined an anatomic FE model of human lumbar L3-4 segment and probabilistic analysis of its structural and material properties, was used to generate a dataset of 500 random disc samples with varying structural and material properties. The sensitivity of the biomechanical responses, including intervertebral displacements/rotations, intradiscal pressures (IDP), fiber stresses and matrix strains of annulus fibrosus (AF), were systematically quantified under various physiological loading conditions, including a 500N compression and 7.5Nm moments in the 3 primary rotations. Significant variations of the IDPs, IVD displacements/rotations, and stress/strain distributions were found using the dataset of 500 ramdom disc samples. Under all the loading conditions, the IDPs were positively correlated with the Poisson's ratio of the NP (r = 0.46 to 0.75, p = 0.004-0.001) and negatively with the Young's modulus of the annulus matrix (r = -0.48 to -0.65, p = 0.003-0.001). The primary intervertebral rotations were significantly affected by the Young's modulus of the annulus matrix (r = -0.44 to -0.71, p = 0.001-0.032) and the orientations of the annular fibers (r = -0.45 to -0.69, p = 0.001-0.029). The heterogeneity of structures and material properties of the IVD had distinct effects on the biomechanical performances of the IVD. These data could help improve our understanding of the intrinsic biomechanics of the IVD and provide references for optimal design of tissue engineered discs by controlling structural and material properties of the disc components.

In vitroandin vivoeffect of polycaprolactone nanofiber coating on polyethylene glycol diacrylate scaffolds for intervertebral disc repair

Polyethylene glycol diacrylate (PEGDA) is an important class of photosensitive polymer with many tissue engineering applications. This study compared PEGDA and polycaprolactone (PCL) nanofiber matrix (NFM) coated PEGDA, referred to as PCL-PEGDA, scaffolds for their application in multiple tissue repair such as articular cartilage, nucleus pulposus of the intervertebral disc (IVD). We examined each scaffold morphology, porosity, swelling ratio, degradation, mechanical strength, andin vitrocytocompatibility properties. A defect was created in Sprague Dawley rat tail IVD by scraping native cartilage tissue and disc space, then implanting the scaffolds in the disc space for 4 weeks to evaluatein vivoefficacy of multi-tissue repair. Maintenance of disc height and creation of a new cell matrix was assessed to evaluate each scaffold's ability to repair the tissue defect. Although both PEGDA and PCL-PEGDA scaffolds showed similar porosity ∼73%, we observed distinct topographical characteristics and a higher effect of degradation on the water-absorbing capacity for PEGDA compared to PCL-PEGDA. Mechanical tests showed higher compressive strength and modulus of PCL-PEGDA compared to PEGDA.In vitrocell studies show that the PCL NFM layer covering PEGDA improved osteoblast cell adhesion, proliferation, and migration into the PEGDA layer.In vivostudies concluded that the PEGDA scaffold alone was not ideal for implantation in rat caudal disc space without PCL nanofiber coating due to low compressive strength and modulus.In vivoresults confirm that the PCL-PEGDA scaffold-maintained disc space and created a proteoglycan and collagen-rich new tissue matrix in the defect site after 4 weeks of scaffold implantation. We concluded that our developed PCL-PEGDA has the potential to be used in multi-tissue defect site repair.

Long-term pre-clinical evaluation of an injectable chitosan nanocellulose hydrogel with encapsulated adipose-derived stem cells in an ovine model for IVD regeneration

The potential therapeutic benefit of adipose-derived stem cells (ASCs) encapsulated in an injectable hydrogel for stimulating intervertebral disc (IVD) regeneration has been assessed by a number of translational and preclinical studies. However, previous work has been primarily limited to small animal models and short-term outcomes of only a few weeks. Long-term studies in representative large animal models are crucial for translation into clinical success, especially for permanent stabilization of major defects such as disc herniation. An injectable chitosan carboxymethyl cellulose hydrogel scaffold loaded with ASCs was evaluated regarding its intraoperative handling, crosslinking kinetics, cell viability, fully-crosslinked viscoelasticity, and long-term therapeutic effects in an ovine model. Three IVDs per animal were damaged in 10 sheep. Subcutaneous adipose tissue was the source for autologous ASCs. Six weeks after IVD damage, two of the damaged IVDs were treated via ASC-loaded hydrogel injection. After 12 months following the implantation, IVD disc height and histological and cellular changes were assessed. This system was reliable and easy to handle intraoperatively. Over 12 months, IVD height was stabilized and degeneration progression significantly mitigated compared to untreated, damaged IVDs. Here we show for the first time in a large animal model that an injectable chitosan carboxymethyl cellulose hydrogel system with encapsulated ASCs is able to affect long-term stabilization of an injured IVD and significantly decrease degeneration processes as compared to controls.

Multiscale Regulation of the Intervertebral Disc: Achievements in Experimental, In Silico, and Regenerative Research

Intervertebral disc (IVD) degeneration is a major risk factor of low back pain. It is defined by a progressive loss of the IVD structure and functionality, leading to severe impairments with restricted treatment options due to the highly demanding mechanical exposure of the IVD. Degenerative changes in the IVD usually increase with age but at an accelerated rate in some individuals. To understand the initiation and progression of this disease, it is crucial to identify key top-down and bottom-up regulations' processes, across the cell, tissue, and organ levels, in health and disease. Owing to unremitting investigation of experimental research, the comprehension of detailed cell signaling pathways and their effect on matrix turnover significantly rose. Likewise, in silico research substantially contributed to a holistic understanding of spatiotemporal effects and complex, multifactorial interactions within the IVD. Together with important achievements in the research of biomaterials, manifold promising approaches for regenerative treatment options were presented over the last years. This review provides an integrative analysis of the current knowledge about (1) the multiscale function and regulation of the IVD in health and disease, (2) the possible regenerative strategies, and (3) the in silico models that shall eventually support the development of advanced therapies.

Chitosan based bioactive materials in tissue engineering applications-A review

In recent years, there have been increasingly rapid advances of using bioactive materials in tissue engineering applications. Bioactive materials constitute many different structures based upon ceramic, metallic or polymeric materials, and can elicit specific tissue responses. However, most of them are relatively brittle, stiff, and difficult to form into complex shapes. Hence, there has been a growing demand for preparing materials with tailored physical, biological, and mechanical properties, as well as predictable degradation behavior. Chitosan-based materials have been shown to be ideal bioactive materials due to their outstanding properties such as formability into different structures, and fabricability with a wide range of bioactive materials, in addition to their biocompatibility and biodegradability. This review highlights scientific findings concerning the use of innovative chitosan-based bioactive materials in the fields of tissue engineering, with an outlook into their future applications. It also covers latest developments in terms of constituents, fabrication technologies, structural, and bioactive properties of these materials that may represent an effective solution for tissue engineering materials, making them a realistic clinical alternative in the near future.

Materials for the Spine: Anatomy, Problems, and Solutions

Disc degeneration affects 12% to 35% of a given population, based on genetics, age, gender, and other environmental factors, and usually occurs in the lumbar spine due to heavier loads and more strenuous motions. Degeneration of the extracellular matrix (ECM) within reduces mechanical integrity, shock absorption, and swelling capabilities of the intervertebral disc. When severe enough, the disc can bulge and eventually herniate, leading to pressure build up on the spinal cord. This can cause immense lower back pain in individuals, leading to total medical costs exceeding $100 billion. Current treatment options include both invasive and noninvasive methods, with spinal fusion surgery and total disc replacement (TDR) being the most common invasive procedures. Although these treatments cause pain relief for the majority of patients, multiple challenges arise for each. Therefore, newer tissue engineering methods are being researched to solve the ever-growing problem. This review spans the anatomy of the spine, with an emphasis on the functions and biological aspects of the intervertebral discs, as well as the problems, associated solutions, and future research in the field.