ZnO/Ag/Ag2WO4 photo-electrodes with plasmonic behavior for enhanced photoelectrochemical water oxidation

Efficient CuO/Ag2WO4 photoelectrodes for photoelectrochemical water splitting using solar visible radiation

Water splitting energy production relies heavily on the development of high-performance photoelectrochemical cells (PECs). Among the most highly regarded semiconductor materials, cupric oxide (CuO) is an excellent photocathode material. Pristine CuO does not perform well as a photocathode due to its tendency to recombine electrons and holes rapidly. Photocathodes with high efficiency can be produced by developing CuO-based composite systems. The aim of our research is to develop an Ag₂WO₄/CuO composite by incorporating silver tungstate (Ag₂WO₄) nanoparticles onto hydrothermally grown CuO nanoleaves (NLs) by successive ionic layer adsorption and reaction (SILAR). To prepare CuO/Ag₂WO₄ composites, SILAR was used in conjunction with different Ag₂WO₄ nanoparticle deposition cycles. Physicochemical characterization reveals well-defined nanoleaves morphologies with tailored surface compositions. Composite CuO/Ag₂WO₄ crystal structures are governed by the monoclinic phase of CuO and the hexagonal phase of Ag₂WO₄. It has been demonstrated that the CuO/Ag₂WO₄ composite has outstanding performance in the PEC water splitting process when used with five cycles. In the CuO/Ag₂WO₄ photocathode, water splitting activity is observed at low overpotential and high photocurrent density, indicating that the reaction takes place at low energy barriers. Several factors contribute to PEC performance in composites. These factors include the high density of surface active sites, the high charge separation rate, the presence of favourable surface defects, and the synergy of CuO and Ag₂WO₄ photoreaction. By using SILAR, silver tungstate can be deposited onto semiconducting materials with strong visible absorption, enabling the development of energy-efficient photocathodes.

SILAR Deposition of Metal Oxide Nanostructured Films

Methods for the fabrication of thin films with well controlled structure and properties are of great importance for the development of functional devices for a large range of applications. SILAR, the acronym for Successive Ionic Layer Adsorption and Reaction, is an evolution and combination of two other deposition methods, the Atomic Layer Deposition and Chemical Bath Deposition. Due to a relative simplicity and low cost, this method has gained increasing interest in the scientific community. There are, however, several aspects related to the influence of the many parameters involved, which deserve further deepening. In this review article, the basis of the method, its application to the fabrication of thin films, the importance of experimental parameters, and some recent advances in the application of oxide films are reviewed. At first the fundamental theoretical bases and experimental concepts of SILAR are discussed. Then, the fabrication of chalcogenides and metal oxides is reviewed, with special emphasis to metal oxides, trying to extract general information on the effect of experimental parameters on structural, morphological and functional properties. Finally, recent advances in the application of oxide films prepared by SILAR are described, focusing on supercapacitors, transparent electrodes, solar cells, and photoelectrochemical devices.

Solar-Driven Photoelectrochemical Performance of Novel ZnO/Ag2WO4/AgBr Nanorods-Based Photoelectrodes

Highly efficient photoelectrochemical (PEC) water oxidation under solar visible light is crucial for water splitting to produce hydrogen as a source of sustainable energy. Particularly, silver-based nanomaterials are important for PEC performance due to their surface plasmon resonance which can enhance the photoelectrochemical efficiency. However, the PEC of ZnO/Ag2WO4/AgBr with enhanced visible-light water oxidation has not been studied so far. Herein, we present a novel photoelectrodes based on ZnO/Ag2WO4/AgBr nanorods (NRs) for PEC application, which is prepared by the low-temperature chemical growth method and then by successive ionic layer adsorption and reaction (SILAR) method. The synthesized photoelectrodes were investigated by several characterization techniques, emphasizing a successful synthesis of the ZnO/Ag2WO4/AgBr heterostructure NRs with excellent photocatalysis performance compared to pure ZnO NRs photoelectrode. The significantly enhanced PEC was due to improved photogeneration and transportation of electrons in the heterojunction due to the synergistic effect of the heterostructure. This study is significant for basic understanding of the photocatalytic mechanism of the heterojunction which can prompt further development of novel efficient photoelectrochemical-catalytic materials.

Au decorated BiVO4 inverse opal for efficient visible light driven water oxidation

Photocatalytic water splitting provides an effective way to prepare hydrogen and oxygen. However, the weak light utilization and sluggish kinetics in the oxygen evolution reaction (OER) process substantially retard the photocatalytic efficiency. In this context, modification of the semiconductors to overcome these limits has been the effective strategy for obtaining highly-efficient photocatalytic water oxidation. Here, plasmonic Au has been loaded onto BiVO4 inverse opal (IO) for photocatalytic water oxidation. It is discovered that the IO structure provides higher specific surface area and favors light absorption on BiVO4. In the meantime, the plasmonic Au can simultaneously enhance the light-utilization capability and photogenerated charge carrier utilization ability of the BiVO4 IO. As a result, a high photocurrent density and long photogenerated charge carrier lifetime can be achieved on the optimized Au-BiVO4 IO, thereby obtaining a superior photocatalytic activity with an oxygen production rate of 9.56 μmol g-1 h-1.

Ratiometric fluorescence determination of hydrogen peroxide using carbon dot-embedded Ag@EuWO4(OH) nanocomposites

A sheet-like carbon dot-embedded Ag@EuWO₄(OH) luminescent nanoprobe was successfully developed for assaying hydrogen peroxide. Firstly, the carbon dot-embedded EuWO₄(OH) nanosheets were prepared in a Eu(NO₃)₃·6H₂O-(NH₄)₁₀H₂(W₂O₇)₆·xH₂O-CS(NH₂)₂ hydrothermal synthetic system. Subsequently, the carbon dot-embedded EuWO₄(OH) was functionalized by Ag nanoparticles using an in situ photochemical deposition strategy upon ultraviolet light irradiation. Taking advantage of the dual emissions of the luminescence from carbon dots and characteristic red transitions of Eu³⁺ ions in the integrated system, the carbon dot-embedded Ag@EuWO₄(OH) luminescent composites exhibit ratiometric fluorescence responsive activity towards hydrogen peroxide. The luminescent intensity ratio of Eu³⁺ (614 nm) to carbon dots (389 nm) shows a polynomial function with changing hydrogen peroxide concentration. The corresponding detection limit is 60 μM at a signal-to-noise ratio of 3 (S/N = 3) implying the potential use of the carbon dot-embedded Ag@EuWO₄(OH) as nanoprobe. The method was applied to the quantification of H₂O₂ in real samples with satisfactory results. Graphical abstract A carbon dot-embedded Ag@EuWO₄(OH) luminescence ratiometric probe was successfully prepared through hydrothermal method and in situ photochemical deposition strategy. The luminescence intensity ratio of Eu³⁺ to carbon dots shows synergistic luminescence response activity towards H₂O₂ with detection limit of 60 μM.