An addressable packing parameter approach for reversibly tuning the assembly of oligo(aniline)-based supra-amphiphiles

Tunable Fluorescence and Morphology of Aggregates Built from a Mechanically Bonded Amphiphilic Bistable [2]Rotaxane

Advanced Organic Chemical Materials Co-constructed Mechanically bonded amphiphiles (MBAs), also known as mechanically interlocked molecules (MIMs), have emerged as an important kind of functional building block for the construction of artificial molecular machines and soft materials. Herein, a novel MBA, i. e., bistable [2]rotaxane H2 was designed and synthesized. In the solution state, H2 demonstrated pH and metal ion-responsive emissions due to the presence of a distance-dependent photoinduced electron transfer (PET) process and the fluorescence resonance energy transfer (FRET) process, respectively. Importantly, the amphiphilic feature of H2 has endowed it with unique self-assembly capability, and nanospheres were obtained in a mixed H2 O/CH3 CN solvent. Moreover, the morphology of H2 aggregates can be tuned from nanospheres to vesicles due to the pH-controlled shuttling motion-induced alternation of H2 amphiphilicity. Interestingly, larger spheres with novel pearl-chain-like structures from H2 were observed after adding stoichiometric Zn2+ . In particular, H2 shows pH-responsive emissions in its aggregation state, allowing the visualization of the shuttling movement by just naked eyes. It is assumed that the well-designed [2]rotaxane, and particularly the proposed concept of MBA shown here, will further enrich the families of MIMs, offering prospects for synthesizing more MIMs with novel assembly capabilities and bottom-up building dynamic smart materials with unprecedented functions.

Fabrication of polyaniline/poly(vinyl alcohol)/montmorillonite hybrid aerogels toward efficient adsorption of organic dye pollutants

Fabrication of adsorbents with excellent adsorption capacity, outstanding stability, easy separation ability, excellent recyclability and widely generality for organic dyes removal from wastewater remains challenging. Herein, three-dimensional polyaniline/poly(vinyl alcohol)/montmorillonite (PANI/PVAL/MMT) hybrid aerogels with easy separation performance and highly effective reusable adsorption on both anionic and cationic dyes were fabricated by a simple in-situ polymerization method. As-prepared hybrid aerogels were characterized via infrared and Raman spectra, scanning electron microscopy, energy dispersive spectra mapping, small and wide-angle X-ray scattering, thermogravimetric analysis, mercury intrusion porosimetry and elemental analysis. The results showed that MMT particles were successfully incorporated into aerogel matrix. Well-defined hierarchical structure, where PANI nanofibers are coated on the skeleton wall, can be observed for PANI/PVAL/MMT when the incorporation amount of MMT was around 11.1 wt%. The adsorption performance of as-prepared hybrid aerogels on both anionic and cationic dyes was systemically carried out at different solution pH, adsorbent dosage and initial dye concentration. The data analysis showed that the adsorption process for PVAL/PANI/MMT aerogel for Reactive Black 5, methyl orange and safranin followed Freundlich isotherm and the maximum experimental adsorption capacities were found to be 199, 251 and 57.0 mg g^-1 at 25 °C, respectively. Mechanism studies indicated that the electrostatic interaction is the main driving force for the adsorption of dyes. The results demonstrated that the fabricated hybrid aerogel is an efficient adsorbent for the removal of both anionic and cationic organic dyes.

Linear and star-shaped π-conjugated oligoanilines: a review on molecular design in syntheses and properties

Molecular Design and Synthesis of Linear and Star-shaped π-conjugated Oligoanilines with reversible optoelectrochemical properties.

A unique amphiphilic triblock copolymer, nontoxic to human blood and potential supramolecular drug delivery system for dexamethasone

The drug delivery system (DDS) often causes toxicity, triggering undesired cellular injuries. Thus, developing supramolecules used as DDS with tunable self-assembly and nontoxic behavior is highly desired. To address this, we aimed to develop a tunable amphiphilic ABA-type triblock copolymer that is nontoxic to human blood cells but also capable of self-assembling, binding and releasing the clinically used drug dexamethasone. We synthesized an ABA-type amphiphilic triblock copolymer (P2L) by incorporating tetra(aniline) TANI as a hydrophobic and redox active segment along with monomethoxy end-capped polyethylene glycol (mPEG2k; Mw = 2000 g mol-1) as biocompatible, flexible and hydrophilic part. Cell cytotoxicity was measured in whole human blood in vitro and lung cancer cells. Polymer-drug interactions were investigated by UV-Vis spectroscopy and computational analysis. Our synthesized copolymer P2L exhibited tuned self-assembly behavior with and without external stimuli and showed no toxicity in human blood samples. Computational analysis showed that P2L can encapsulate the clinically used drug dexamethasone and that drug uptake or release can also be triggered under oxidation or low pH conditions. In conclusion, copolymer P2L is nontoxic to human blood cells with the potential to carry and release anticancer/anti-inflammatory drug dexamethasone. These findings may open up further investigations into implantable drug delivery systems/devices with precise drug administration and controlled release at specific locations.

Block-copolymer-like self-assembly behavior of mobile-ligand grafted ultra-small nanoparticles

We use coarse-grained molecular dynamics simulations to study the self-assembly behavior of polyoxometalate (POM) nanoparticles (NPs) decorated with mobile polymer ligands under melt conditions. We demonstrate that due to the mobile nature of the grafted ligands on the NP surface, NPs have the ability to expose a part of their surfaces, leading to a block-copolymer-like self-assembly behavior. The exposed NP surface serves as one block and the grafted ligand polymers as another. This system has a strong ability to self-assemble into long-range ordered structures such as block copolymers due to large incompatibility between POM and ligand polymers, i.e., POM NPs can form lamellar, cylindrical, and spherical structures, which are consistent with previous experimental results. More importantly, these ordered structures are on the sub-10 nm scale, which is an important requirement for many applications. At low graft density, we find a new inverse-cylindrical structure formation where polymers form cylinders and POMs form a continuous network structure. A full self-assembly phase diagram is constructed which illustrates rules to manipulate the self-assembly structures of NPs decorated with mobile polymer ligands. We hope that these computational results will be useful for the new design of nanostructures with improved optical or electronic functions.

Controllable and Diversiform Topological Morphologies of Self-Assembling Supra-Amphiphiles with Aggregation-Induced Emission Characteristics for Mimicking Light-Harvesting Antenna

Controllable construction of diversiform topological morphologies through supramolecular self-assembly on the basis of single building block is of vital importance, but still remains a big challenge. Herein, a bola-type supra-amphiphile, namely DAdDMA@2β-CD, is rationally designed and successfully prepared by typical host-guest binding β-cyclodextrin units with an aggregation-induced emission (AIE)-active scaffold DAdDMA. Self-assembling investigation reveals that several morphologies of self-assembled DAdDMA@2β-CD including leaf-like lamellar structure, nanoribbons, vesicles, nanofibers, helical nanofibers, and toroids, can be straightforwardly fabricated by simply manipulating the self-assembling solvent proportioning and/or temperature. To the best of knowledge, this presented protocol probably holds the most types of self-assembling morphology alterations using a single entity. Moreover, the developed leaf-like lamellar structure performs well in mimicking the light-harvesting antenna system by incorporating with a Förster resonance energy transfer acceptor, providing up to 94.2% of energy transfer efficiency.

Tunable Self-Assembled Nanostructures of Electroactive PEGylated Tetra(Aniline) Based ABA Triblock Structures in Aqueous Medium

PEGylated tetra(aniline) ABA triblock structure PEG-TANI-PEG (2) consisting of tetra(aniline) (TANI) and polyethylene glycol (PEG) was synthesized by coupling the tosylated-PEG to boc-protected NH2/NH2 TANI (1) through a simple nucleophilic substitution reaction. Deprotection of 2 resulted in a leucoemeraldine base state of TANI (2-LEB), which was oxidized to stable emeraldine base (2-EB) state. 2-EB was doped with 1 M HCl to emeraldine salt (2-ES) state. FTIR, 1H and 13C NMR and UV-Vis-NIR spectroscopy, and MS (ESI) was used for structural characterization. The synthesized triblock structure exhibited good electroactivity as confirmed by CV and UV-Vis-NIR spectroscopy. Self-assembling of the triblock structure in aqueous medium was assessed by DLS, TEM, and SEM. Spherical aggregates were observed with variable sizes depicting the effect of concentration and oxidation of 2-LEB. Further, the aggregates showed acid/base sensitivity as evaluated by doping and dedoping of 2-EB with 1 M HCl and 1 M NH4OH, respectively. Future applications in drug delivery and sensors are envisaged for such tunable self-assembled nanostructures in aqueous media.

What dominates the interfacial properties of extended surfactants: Amphipathicity or surfactant shape?

HYPOTHESIS

The properties of conventional surfactants (c-surfactants) are generally accepted to be amphipathicity-dominated, but extended surfactants (e-surfactants) are additionally polypropylene oxide (PPO)-dependent; this additional property makes us wonder how an intramolecular PPO spacer would be "extended" at various interfaces and what is responsible for the excellent all-round properties of e-surfactants.

EXPERIMENTS

A series of novel sodium medium alkyl chain PPO-b-PEO sulfates (2-ethylhexyl polypropylene oxide-block-polyethylene oxide sulfates, C₈P_pE_eS) were designed, synthesized and structurally identified. Tensiometry was applied to estimate the surfactant shape at the air/water surface. Surface tension, interfacial tension, emulsifying power, electrolyte tolerance, adsorption onto oil sands and thermal hydrolysis stability were measured to evaluate the effect of the PPO coil on the interfacial and micellar properties of the e-surfactants.

FINDINGS

On the basis of obtaining greater values for e-surfactants than c-surfactants for both surface area (a_m) per surfactant molecule and the corresponding shape factor (S), we were surprised to find that e-surfactants form a rugby ball shape not only at the air/water surface but also at the oil/water interface; this result is potentially explained by the PPO spacer coiling and collapsing to produce dense packing at the monolayer adsorption, which is rationally borrowed by other interfaces. Many positive or negative correlations were observed between the interfacial/micellar properties of C₈P_pE_eS and a_m values, which seems that the surfactant shape dominants the properties of the e-surfactants. In fact, the properties of C₈P_pE_eS are dominated by the dynamic amphipathicity and assisted by the rugby ball shape of the molecules because of both being driven by the dynamic biphasic affinity of the PPO coil in response to the external environment; these findings provide soft interfacial materials specially adapted for surfactant flooding.

Molecular engineering of polymeric supra-amphiphiles

Polymeric supra-amphiphiles are amphiphiles that are fabricated by linking polymeric segments, or small molecules and polymeric segments, by noncovalent interactions or dynamic covalent bonds. Compared with conventional amphiphilic polymers, polymeric supra-amphiphiles are advantageous in that they possess dynamic features and their preparation may be to some extent more facile. Moreover, polymeric supra-amphiphiles are endowed with richer structure and higher stability compared with small-molecule supra-amphiphiles. Owing to these properties, polymeric supra-amphiphiles have so far shown great promise as surfactants, nanocarriers and in therapies. In this tutorial review, recent work on polymeric supra-amphiphiles, from molecular architectures to functional assemblies, is presented and summarized. Different polymeric supra-amphiphile topologies and related applications are highlighted. By combining polymer chemistry with supramolecular chemistry and colloid science, we anticipate that the study of polymeric supra-amphiphiles will promote the continued development of the molecular engineering of functional supramolecular systems, and lead to practical applications, especially in drug delivery.

Electroactive Amphiphiles for Addressable Supramolecular Nanostructures

In this focus review we aim to highlight an exciting class of materials, electroactive amphiphiles (EAAs). This class of functional amphiphilic molecules has been the subject of sporadic investigations over the last few decades, but little attempt has been made to date to gather or organise these investigations into a logical fashion. Here we attempted to gather the most important contributions, provide a framework in which to discuss them, and, more importantly, point towards the areas where we believe these EAAs will contribute to solving wider scientific problems and open new opportunities. Our discussions cover materials based on low molecular weight ferrocenes, viologens and anilines, as well as examples of polymeric and supramolecular EAAs. With the advances of modern analytical techniques and new tools for modelling and understanding optoelectronic properties, we believe that this area of research is ready for further exploration and exploitation.

A novel supramolecular AIE gel acts as a multi-analyte sensor array

Supramolecular gelator WJ could form a stable supramolecular organogel (WJG) with strong aggregation-induced emission (AIE). Utilizing the AIE gel, we successfully developed a multi-analyte sensor array which could accurately identify CN⁻, Al³⁺, and Fe³⁺ and l-Cys.