A β-diketiminate manganese catalyst for alkene hydrosilylation: substrate scope, silicone preparation, and mechanistic insight

Chemoselective Hydrogenation of α,β-Unsaturated Ketones Catalyzed by a Manganese(I) Hydride Complex

Here, we report the chemoselective hydrogenation of α,β-unsaturated ketones catalyzed by a well-defined Mn(I) PCNHCP pincer complex [(PCNHCP)Mn(CO)2H] (1). The reaction is compatible with a wide variety of functional groups that include halides, esters, amides, nitriles, nitro, alkynes, and alkenes, and for most substrates occurs readily at ambient hydrogen pressure (1-2 bar). Mechanistic studies and deuterium labeling experiments reveal a non-cooperative mechanism, which is further discussed in this report.

Tandem manganese catalysis for the chemo-, regio-, and stereoselective hydroboration of terminal alkynes: in situ precatalyst activation as a key to enhanced chemoselectivity

The manganese(ii) complex [Mn(iPrPNP)Cl2] (iPrPNP = 2,6-bis(diisopropylphosphinomethyl)pyridine) was found to catalyze the stereo- and regioselective hydroboration of terminal alkynes employing HBPin (pinacolborane). In the absence of in situ activators, mixtures of alkynylboronate and E-alkenylboronate esters were formed, whereas when NaHBEt3 was employed as the in situ activator, E-alkenylboronate esters were exclusively accessed. Mechanistic studies revealed a tandem C-H borylation/semihydrogenation pathway accounting for the formation of the products. Stoichiometric reactions hint toward reaction of a Mn-H active species with the terminal alkyne as the catalyst entry pathway to the cycle, whereas reaction with HBPin led to catalyst deactivation.

Catalytic acceptorless dehydrogenative borylation of styrenes enabled by a molecularly defined manganese complex

In this study, we employed a 3d metal complex as a catalyst to synthesize alkenyl boronate esters through the dehydrogenative coupling of styrenes and pinacolborane. The process generates hydrogen gas as the sole byproduct without requiring an acceptor, rendering it environmentally friendly and atom-efficient. This methodology demonstrated exceptional selectivity for dehydrogenative borylation over direct hydroboration. Additionally, it exhibited a preference for borylating aromatic alkenes over aliphatic ones. Notably, derivatives of natural products and bioactive molecules successfully underwent diversification using this approach. The alkenyl boronate esters served as precursors for the synthesis of various pharmaceuticals and potential anticancer agents. Our research involved comprehensive experimental and computational studies to elucidate the reaction pathway, highlighting the B-H bond cleavage as the rate-determining step. The catalyst's success was attributed to the hemilability and metal-ligand bifunctionality of the ligand backbone.

Hydrosilylation of Terminal Alkynes Catalyzed by an Air-Stable Manganese-NHC Complex

In recent years, catalysis with base metal manganese has received a significant amount of interest. Catalysis with manganese complexes having N-heterocyclic carbenes (NHCs) is relatively underdeveloped in comparison to the extensively investigated manganese catalysts possessing pincer ligands (particularly phosphine-based ligands). Herein, we describe the synthesis of two imidazolium salts decorated with picolyl arms (L₁ and L₂) as NHC precursors. Facile coordination of L₁ and L₂ with MnBr(CO)₅ in the presence of a base resulted in the formation manganese(I)-NHC complexes (1 and 2) as an air-stable solid in good isolated yield. Single-crystal X-ray analysis revealed the structure of the cationic complexes [Mn(CO)₃(NHC)][PF₆] with tridentate N,C,N binding of the NHC ligand in a facile fashion. Along with a few known manganese(I) complexes, these Mn(I)-NHC complexes 1 and 2 were tested for the hydrosilylation of terminal alkynes. Complex 1 was proved to be an effective catalyst for the hydrosilylation of terminal alkynes with good selectivity toward the less thermodynamically stable β-(Z)-vinylsilanes. This method provided good regioselectivity (anti-Markovnikov addition) and stereoselectivity (β-(Z)-product). Experimental evidence suggested that the present hydrosilylation pathway involved an organometallic mechanism with manganese(I)-silyl species as a possible reactive intermediate.

Manganese Salan Complexes as Catalysts for Hydrosilylation of Aldehydes and Ketones

Manganese has attracted significant recent attention due to its abundance, low toxicity, and versatility in catalysis. In the present study, a series of manganese (III) complexes supported by salan ligands have been synthesized and characterized, and their activity as catalysts in the hydrosilylation of carbonyl compounds was examined. While manganese (III) chloride complexes exhibited minimal catalytic efficacy without activation of silver perchlorate, manganese (III) azide complexes showed good activity in the hydrosilylation of carbonyl compounds. Under optimized reaction conditions, several types of aldehydes and ketones could be reduced with good yields and tolerance to a variety of functional groups. The possible mechanisms of silane activation and hydrosilylation were discussed in light of relevant experimental observations.

Sustainable preparation of aminosilane monomers, oligomers, and polymers through Si-N dehydrocoupling catalysis

This article covers historical and recent efforts to catalyse the dehydrocoupling of amines and silanes, a direct method for Si-N bond formation that offers hydrogen as a byproduct. In some applications, this transformation can be used as a sustainable replacement for traditional aminosilane synthesis, which demands corrosive chlorosilanes while generating one equivalent of ammonium salt waste for each Si-N bond that is formed. These advantages have driven the development of Si-N dehydrocoupling catalysts that span the periodic table, affording mechanistic insight that has led to advances in efficiency and selectivity. Given the divergence in precursors being used, characterization methods being relied on, and applications being targeted, this article highlights the formation of monomeric aminosilanes separately from oligomeric and polymeric aminosilanes. A recent study that allowed for the manganese catalysed synthesis of perhydropolysilazane and commercial chemical vapor deposition precursors is featured, and key opportunities for advancing the field of Si-N dehydrocoupling catalysis are discussed.

Trans Ligand Determines the Stability of Paramagnetic Manganese(II) Hydrides of the Type trans-[MnH(L)(dmpe)2]+ Where L is PMe3, C2H4, or CO

Paramagnetic metal hydride (PMH) complexes play important roles in catalytic applications and bioinorganic chemistry. 3d PMH chemistry has largely focused on Ti, Mn, Fe, and Co. Various Mn^II PMHs have been proposed as intermediates in catalysis, but isolated Mn^II PMHs are limited to dimeric high-spin Mn^II structures with bridging hydrides. In this paper, a series of the first low-spin monomeric Mn^II PMH complexes are generated by chemical oxidation of their Mn^I analogues. This series is of the type trans-[MnH(L)(dmpe)₂]^+/0 where the trans ligand L is PMe₃, C₂H₄, or CO [dmpe is 1,2-bis(dimethylphosphino)ethane], and the thermal stability of the Mn^II hydride complexes was found to be strongly dependent on the identity of the trans ligand. When L is PMe₃, the complex is the first example of an isolated monomeric Mn^II hydride complex. In contrast, when L is C₂H₄ or CO, the complexes are only stable at low temperatures; upon warming to room temperature, the former decomposed to afford [Mn(dmpe)₃]⁺, accompanied by ethane and ethylene, whereas the latter eliminated H₂, generating [Mn(MeCN)(CO)(dmpe)₂]⁺ or a mixture of products including [Mn(κ¹-PF₆)(CO)(dmpe)₂], depending on the reaction conditions. All PMHs were characterized by low-temperature electron paramagnetic resonance (EPR) spectroscopy, and stable [MnH(PMe₃)(dmpe)₂]⁺ was further characterized by UV-vis and IR spectroscopy, Superconducting Quantum Interference Device magnetometry, and single-crystal X-ray diffraction. Noteworthy spectral properties are the significant EPR superhyperfine coupling to the hydride (∼85 MHz) and an increase (+33 cm^-1) in the Mn-H IR stretch upon oxidation. Density functional theory calculations were also employed to gain insights into the acidity and bond strengths of the complexes. Mn^II-H bond dissociation free energies are estimated to decrease in the series of complexes from 60 (L = PMe₃) to 47 kcal/mol (L = CO).

Homogeneous Manganese-Catalyzed Hydrofunctionalizations of Alkenes and Alkynes: Catalytic and Mechanistic Tendencies

In recent years, many manganese-based homogeneous catalytic precursors have been developed as powerful alternatives in organic synthesis. Among these, the hydrofunctionalizations of unsaturated C-C bonds correspond to outstanding ways to afford compounds with more versatile functional groups, which are commonly used as building blocks in the production of fine chemicals and feedstock for the industrial field. Herein, we present an account of the Mn-catalyzed homogeneous hydrofunctionalizations of alkenes and alkynes with the main objective of finding catalytic and mechanistic tendencies that could serve as a platform for the works to come.

Interplay between β-Diimino and β-Diketiminato Ligands in Nickel Complexes Active in the Proton Reduction Reaction

Two Ni complexes are reported with κ⁴-P₂N₂ β-diimino (BDI) ligands with the general formula [Ni(XBDI)](BF₄)₂, where BDI is N-(2-(diphenylphosphaneyl)ethyl)-4-((2-(diphenylphosphaneyl)ethyl)imino)pent-2-en-2-amine and X indicates the substituent in the α-carbon intradiimine position, X = H for 1(BF₄)₂ and X = Ph for 2(BF₄)₂. Electrochemical analysis together with UV-vis and NMR spectroscopy in acetonitrile and dimethylformamide (DMF) indicates the conversion of the β-diimino complexes 1²⁺ and 2²⁺ to the negatively charged β-diketiminato (BDK) analogues (1-H)⁺ and (2-H)⁺ via deprotonation in DMF. Moreover, further electrochemical and spectroscopy evidence indicates that the one-electron-reduced derivatives 1⁺ and 2⁺ can also rapidly evolve to the BDK (1-H)⁺ and (2-H)⁺, respectively, via hydrogen gas evolution through a bimolecular homolytic pathway. Finally, both complexes are demonstrated to be active for the proton reduction reaction in DMF at E_app = -1.8 V vs Fc^+/0, being the active species the one-electron-reduced derivative 1-H and 2-H.

Manganese-catalyzed hydrogenation, dehydrogenation, and hydroelementation reactions

The emerging field of organometallic catalysis has shifted towards research on Earth-abundant transition metals due to their ready availability, economic advantage, and novel properties. In this case, manganese, the third most abundant transition-metal in the Earth's crust, has emerged as one of the leading competitors. Accordingly, a large number of molecularly-defined Mn-complexes has been synthesized and employed for hydrogenation, dehydrogenation, and hydroelementation reactions. In this regard, catalyst design is based on three pillars, namely, metal-ligand bifunctionality, ligand hemilability, and redox activity. Indeed, the developed catalysts not only differ in the number of chelating atoms they possess but also their working principles, thereby leading to different turnover numbers for product molecules. Hence, the critical assessment of molecularly defined manganese catalysts in terms of chelating atoms, reaction conditions, mechanistic pathway, and product turnover number is significant. Herein, we analyze manganese complexes for their catalytic activity, versatility to allow multiple transformations and their routes to convert substrates to target molecules. This article will also be helpful to get significant insight into ligand design, thereby aiding catalysis design.

The Rise of Manganese-Catalyzed Reduction Reactions

Recent developments in manganese-catalyzed reducing transformations—hydrosilylation, hydroboration, hydrogenation, and transfer hydrogenation—are reviewed herein. Over the past half a decade (i.e., 2016 to the present), more than 115 research publications have been reported in these fields. Novel organometallic compounds and new reduction transformations have been discovered and further developed. Significant challenges that had historically acted as barriers for the use of manganese catalysts in reduction reactions are slowly being broken down. This review will hopefully assist in developing this research area, by presenting a clear and concise overview of the catalyst structures and substrate transformations published so far.

1 Introduction

2 Hydrosilylation

3 Hydroboration

4 Hydrogenation

5 Transfer Hydrogenation

6 Conclusion and Perspective

Spin-state crossover in photo-catalyzed nitrile dihydroboration via Mn-thiolate cooperation

The role of a phosphine-free SNS-pincer ligand in metal–ligand cooperative hydroboration catalysis was investigated. The bifunctional thiolate donor and spin-state change to high-spin Mn are crucial to accessing low-energy activation barriers.

Radiation curable polysiloxane: synthesis to applications

Among the different types of specialty polymers, polysiloxane finds its position in the pyramid's apex in terms of its performance attributes. Its unique structural features result in it having superior performance benefits over wide operational conditions. Hence, polysiloxanes are used in various industries. Like other polymers, to effectively use polysiloxanes, curing is a non-negotiable fact. Therefore, polysiloxanes are cured using different chemistries such as addition, condensation, and peroxy-mediated methods, etc. However, recently, it has been noted that there is a strong impetus towards developing radiation-curable polysiloxanes. A faster turnover time, higher yield, and marginal involvement in the release of any toxic by-products has resulted in the widespread acceptance of radiation curing techniques. This review article provides insight into the various facets of polysiloxane chemistry, the synthesis of radiation curable polysiloxane, and the curing methodology of polysiloxane using radiation sources such as ultraviolet, electron beam, and gamma radiation. We further provide an account of the various applications of such radiation-curable polysiloxanes.

Reduction of carbonyl compounds via hydrosilylation catalyzed by well-defined PNP-Mn(I) hydride complexes

Reduction reactions of unsaturated compounds are fundamental transformations in synthetic chemistry. In this context, the reduction of polarized double bonds such as carbonyl or C=C motifs can be achieved by hydrogenation reactions. We describe here a highly chemoselective Mn(I)-based PNP pincer catalyst for the hydrosilylation of aldehydes and ketones employing polymethylhydrosiloxane (PMHS) as inexpensive hydrogen donor.

Graphic abstract

Manganese-catalysed divergent silylation of alkenes

Transition-metal-catalysed, redox-neutral dehydrosilylation of alkenes is a long-standing challenge in organic synthesis, with current methods suffering from low selectivity and narrow scope. In this study, we report a general and simple method for the manganese-catalysed dehydrosilylation and hydrosilylation of alkenes, with Mn₂(CO)₁₀ as a catalyst precursor, by using a ligand-tuned metalloradical reactivity strategy. This enables versatility and controllable selectivity with a 1:1 ratio of alkenes and silanes, and the synthetic robustness and practicality of this method are demonstrated using complex alkenes and light olefins. The selectivity of the reaction has been studied using density functional theory calculations, showing the use of an ⁱPrPNP ligand to favour dehydrosilylation, while a JackiePhos ligand favours hydrosilylation. The reaction is redox-neutral and atom-economical, exhibits a broad substrate scope and excellent functional group tolerance, and is suitable for various synthetic applications on a gram scale.

Recent Advances in Catalytic Hydrosilylations: Developments beyond Traditional Platinum Catalysts

Hydrosilylation reactions, which allow the addition of Si-H to C=C/C≡C bonds, are typically catalyzed by homogeneous noble metal catalysts (Pt, Rh, Ir, and Ru). Although excellent activity and selectivity can be obtained, the price, purification, and metal residues of these precious catalysts are problems in the silicone industry. Thus, a strong interest in more sustainable catalysts and for more economic processes exists. In this respect, recently disclosed hydrosilylations using catalysts based on earth-abundant transition metals, for example, Fe, Co, Ni, and Mn, and heterogeneous catalysts (supported nanoparticles and single-atom sites) are noteworthy. This minireview describes the recent advances in this field.

Co2(CO)8 and unsaturated epoxides as unexpected partners in generating functionalized siloxane oils and cross-linked materials

The unexpected formation of cross-linked silicon materials was observed via hydrosilylation of unsaturated epoxides with polymethylhydrosiloxane using Co₂(CO)₈ as a catalyst.

Co2(CO)8 as an efficient catalyst for the synthesis of functionalized polymethylhydrosiloxane oils and unconventional cross-linked materials

Co₂(CO)₈ was found to be an effective and structurally simple catalyst for the functionalization of polymethylhydrosiloxane into functional silicone fluids using terminal alkenes and into cross-linked silicone materials using unconventional tethers.

The electronic structure of a β-diketiminate manganese hydride dimer

The electronic structure of a dimeric manganese hydride catalyst supported by β-diketiminate ligands, [(2,6-iPr2PhBDI)Mn(μ-H)]2, was investigated with density functional theory. A triple bond between the manganese centres was anticipated from simple electron-counting rules; however, calculations revealed Mn-Mn Mayer bond orders of 0.21 and 0.27 for the ferromagnetically-coupled and antiferromagnetically-coupled extremes, respectively. In accordance with experimentally determined Heisenberg exchange coupling constants of -15 ± 0.1 cm-1 (SQUID) and -10.2 ± 0.7 cm-1 (EPR), the calculated J0 value of -10.9 cm-1 confirmed that the ground state involves antiferromagnetic coupling between high spin Mn(ii)-d5 centres. The effect of steric bulk on the bond order was examined via a model study with the least sterically-demanding version of the β-diketiminate ligand and was found to be negligible. Mixing between metal- and β-diketiminate-based orbitals was found to be responsible for the absence of a metal-metal multiple bond. The bridging hydrides give rise to a relatively close positioning of the metal centres, while bridging atoms possessing 2p orbitals result in longer Mn-Mn distances and more stable dimers. The synthesis and characterization of the bridging hydroxide variant, [(2,6-iPr2PhBDI)Mn(μ-OH)]2, provides experimental support for these assessments.

Low-Symmetry β-Diketimine Aryloxide Rare-Earth Complexes: Flexible, Reactive, and Selective

We report the synthesis, characterization, and reactivity of a new low-symmetry β-diketimine featuring a pendant amino(methyl)phenol donor and its corresponding heteroleptic rare-earth (RE) complexes. This includes the first structurally characterized examples of alcoholysis and insertion from an isolated RE^III amide in a β-diketimine framework. The flexible methylene linkage leads to RE^III complexes with tunable dynamic solution behavior that defines their stoichiometric and catalytic reactivity. The addition of a strong neutral donor ligand, tricyclohexylphosphine oxide, suppresses a prevalent catalyst degradation pathway (base-promoted elimination) and dramatically enhances the catalyst performance in the stereospecific ring-opening polymerization of rac-β-butyrolactone. Our results further demonstrate the importance of ligand reorganization in the stoichiometric and catalytic activity of RE^III ions.

Supersilyl as an effective monodentate ligand to stabilize four-coordinate manganese(ii) complexes

Supersilyl, –Si(SiMe₃)₃, serves as an effective ligand to afford a series of four-coordinate manganese(ii) complexes.

Scope and mechanism of nitrile dihydroboration mediated by a β-diketiminate manganese hydride catalyst

Nitrile insertion allows for manganese-catalyzed nitrile dihydroboration at 80 °C.

DFT study of trialkylborohydride-catalysed hydrosilylation of alkenes – the mechanism and its implications

A detailed DFT study reveals the mechanism of trialkylborohydride-catalysed Markovnikov hydrosilylation of aromatic alkenes.

1-D manganese(ii)-terpyridine coordination polymers as precatalysts for hydrofunctionalisation of carbonyl compounds

Efficient hydroboration and hydrosilylation of ketones and aldehydes has been achieved using a Mn^II-coordination polymer as precatalyst under mild conditions_.

Interconversion and reactivity of manganese silyl, silylene, and silene complexes

Interconversions between manganese silylene and silene complexes are reported, including those involving the first spectroscopically observed silene complexes with an SiH substituent, and their involvement in ethylene hydrosilylation is discussed.

Manganese disilyl hydride complexes [(dmpe)₂MnH(SiH₂R)₂] (4^Ph: R = Ph, 4^Bu: R = ⁿBu) reacted with ethylene to form silene hydride complexes [(dmpe)₂MnH(RHSi Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CHMe)] (6^Ph,H: R = Ph, 6^Bu,H: R = ⁿBu). Compounds 6^R,H reacted with a second equivalent of ethylene to generate [(dmpe)₂MnH(REtSi Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CHMe)] (6^Ph,Et: R = Ph, 6^Bu,Et: R = ⁿBu), resulting from apparent ethylene insertion into the silene Si–H bond. Furthermore, in the absence of ethylene, silene complex 6^Bu,H slowly isomerized to the silylene hydride complex [(dmpe)₂MnH( Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> SiEtⁿBu)] (3^Bu,Et). Reactions of 4^R with ethylene likely proceed via low-coordinate silyl {[(dmpe)₂Mn(SiH₂R)] (2^Ph: R = Ph, 2^Bu: R = ⁿBu)} or silylene hydride {[(dmpe)₂MnH( Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> SiHR)] (3^Ph,H: R = Ph, 3^Bu,H: R = ⁿBu)} intermediates accessed from 4^R by H₃SiR elimination. DFT calculations and high temperature NMR spectra support the accessibility of these intermediates, and reactions of 4^R with isonitriles or N-heterocyclic carbenes yielded the silyl isonitrile complexes [(dmpe)₂Mn(SiH₂R)(CNR′)] (7a–d: R = Ph or ⁿBu; R′ = o-xylyl or ^tBu), and NHC-stabilized silylene hydride complexes [(dmpe)₂MnH{ Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> SiHR(NHC)}] (8a–d: R = Ph or ⁿBu; NHC = 1,3-diisopropylimidazolin-2-ylidene or 1,3,4,5-tetramethyl-4-imidazolin-2-ylidene), respectively, all of which were crystallographically characterized. Silyl, silylene and silene complexes in this work were accessed via reactions of [(dmpe)₂MnH(C₂H₄)] (1) with hydrosilanes, in some cases followed by ethylene. Therefore, ethylene (C₂H₄ and C₂D₄) hydrosilylation was investigated using [(dmpe)₂MnH(C₂H₄)] (1) as a pre-catalyst, resulting in stepwise conversion of primary to secondary to tertiary hydrosilanes. Various catalytically active manganese-containing species were observed during catalysis, including silylene and silene complexes, and a catalytic cycle is proposed.

Unexpected intramolecular N-arylcyano-β-diketiminate cyclization in new aminoquinoline derivative complexes of aluminium for CO2 fixation into cyclic carbonates

exo-Dig intramolecular cyclization of β-diketiminates allowed to obtain 4-amino-3-iminoquinolines ligands through a novel pathway. Al(III) complexes bearing these ligands where active towards the synthesis of cyclic carbonates from epoxides and CO₂.

Anti-Markovnikov terminal and gem-olefin hydrosilylation using a κ4-diimine nickel catalyst: selectivity for alkene hydrosilylation over ether C–O bond cleavage

The hydrosilylation of terminal alkenes, allyl ethers, and gem-olefins has been demonstrated using (^Ph2PPrDI)Ni between 25 and 70 °C.