5.1% efficiency of Si photoanodes for photoelectrochemical water splitting catalyzed by porous NiFe (oxy)hydroxide converted from NiFe oxysulfide

Light-Induced Quantum Reconfiguration of Oxyhydroxides for Photoanodes with 4.24% Efficiency and Stability Beyond 250 Hours

Photoelectrochemical (PEC) water splitting is attracting significant research interest in addressing sustainable development goals in renewable energy. Current state-of-the-art, however, cannot provide photoanodes with simultaneously high efficiency and long-lasting lifetime. Here, large-scale NiFe oxyhydroxides-alloy hybridized co-catalyst layer that exhibits an applied bias photon-to-current efficiency (ABPE) of 4.24% in buried homojunction-free photoanodes and stability over 250 h is reported. These performances represent an increase over the present highest-performing technology by 408% in stability and the most stable competitor by over 330% in efficiency. These results originate from a previously unexplored mechanism of light-induced atomic reconfiguration, which rapidly self-generates a catalytic-protective amorphous/crystalline heterostructure at low biases. This mechanism provides active sites for reaction and insulates the photoanode from performance degradation. Photon-generated NiFe oxyhydroxides are more than 200% higher than the quantity that pure electrocatalysis would otherwise induce, overcoming the threshold for an efficient water oxidation reaction in the device. While of immediate interest in the industry of water splitting, the light-induced NiFe oxyhydroxides-alloy co-catalyst developed in this work provides a general strategy to enhance further the performances and stability of PEC devices for a vast panorama of chemical reactions, ranging from biomass valorization to organic waste degradation, and CO2-to-fuel conversion.

An Expansion of Polarization Control Using Semiconductor-Liquid Junctions

This report examines the concept of independent control over current and applied potential in electrocatalysis, as a means of improving control over product selectivity. Previous work, while permitting separate modulation of current and potentiostat bias, precluded independent control over the current flow and applied cell potential. This study seeks to resolve that limitation by exploiting the Schottky diode behavior inherent to semiconductor-electrolyte interfaces. Light is explored as a prospective second degree of freedom for controlling polarization in a suitably designed, photoelectrochemical (PEC) device, enabling the arbitrary selection of current with respect to an applied cell potential. In contrast to metal electrodes, the property of light-dependent carrier concentrations in semiconductors forms the operative means of controlling charge fluxes at some arbitrary applied potential in PEC devices featuring a semiconductor-liquid junction. This functionality enables exploration of polarization states distinct from those accessible with a dark cell, with implications for improved control over electrochemical reactions.

A semiconductor-electrocatalyst nano interface constructed for successive photoelectrochemical water oxidation

Photoelectrochemical water splitting has long been considered an ideal approach to producing green hydrogen by utilizing solar energy. However, the limited photocurrents and large overpotentials of the anodes seriously impede large-scale application of this technology. Here, we use an interfacial engineering strategy to construct a nanostructural photoelectrochemical catalyst by incorporating a semiconductor CdS/CdSe-MoS₂ and NiFe layered double hydroxide for the oxygen evolution reaction. Impressively, the as-prepared photoelectrode requires an low potential of 1.001 V vs. reversible hydrogen electrode for a photocurrent density of 10 mA cm^-2, and this is 228 mV lower than the theoretical water splitting potential (1.229 vs. reversible hydrogen electrode). Additionally, the generated current density (15 mA cm^-2) of the photoelectrode at a given overpotential of 0.2 V remains at 95% after long-term testing (100 h). Operando X-ray absorption spectroscopy revealed that the formation of highly oxidized Ni species under illumination provides large photocurrent gains. This finding opens an avenue for designing high-efficiency photoelectrochemical catalysts for successive water splitting.

Scalable, highly stable Si-based metal-insulator-semiconductor photoanodes for water oxidation fabricated using thin-film reactions and electrodeposition

Metal-insulator-semiconductor (MIS) structures are widely used in Si-based solar water-splitting photoelectrodes to protect the Si layer from corrosion. Typically, there is a tradeoff between efficiency and stability when optimizing insulator thickness. Moreover, lithographic patterning is often required for fabricating MIS photoelectrodes. In this study, we demonstrate improved Si-based MIS photoanodes with thick insulating layers fabricated using thin-film reactions to create localized conduction paths through the insulator and electrodeposition to form metal catalyst islands. These fabrication approaches are low-cost and highly scalable, and yield MIS photoanodes with low onset potential, high saturation current density, and excellent stability. By combining this approach with a p⁺n-Si buried junction, further improved oxygen evolution reaction (OER) performance is achieved with an onset potential of 0.7 V versus reversible hydrogen electrode (RHE) and saturation current density of 32 mA/cm² under simulated AM1.5G illumination. Moreover, in stability testing in 1 M KOH aqueous solution, a constant photocurrent density of ~22 mA/cm² is maintained at 1.3 V versus RHE for 7 days.

Authors demonstrate Si-based MIS photoanodes using Al thin-film reactions to create localized conduction paths through the insulator and Ni electrodeposition to form metal catalyst islands. These approaches yielded low onset potential, high saturation current density, and excellent stability.

Integration of Oxygen-Vacancy-Rich NiFe-Layered Double Hydroxide onto Silicon as Photoanode for Enhanced Photoelectrochemical Water Oxidation

Photoelectrochemical (PEC) water splitting has the potential to efficiently convert intermittent solar energy into storable hydrogen fuel. However, poor charge separation and transfer ability as well as sluggish surface oxygen evolution reaction (OER) kinetics of the photoelectrode severely hinder the advance in PEC performance. Herein, a facile electrodeposition method was used to integrate Mo-doped NiFe-layered double hydroxide onto a NiOx /Ni-protected Si photoanode for enhanced PEC water oxidation. Mo doping contributed to an increased amount of oxygen vacancies, whereas a dynamic surface self-reconstruction was induced by Mo leaching under PEC OER conditions. This led to enhanced PEC performance with an onset potential of 0.87 V vs. reversible hydrogen electrode (RHE), a photocurrent density of 39.3 mA cm-2 at 1.23 V vs. RHE, a fill factor of 0.38, and a solar-to-oxygen conversion efficiency of 5.3 %, along with a stability of 130 h continuous PEC reaction. The performance was superior to that of the undoped NiFe-LDH/NiOx /Ni/Si (4.3 %), which was attributed to the elevated interface charge separation, fast charge transfer, and accelerated OER kinetics.