Recombination and regeneration dynamics in FeNHC(ii)-sensitized solar cells

Factors that Impact Photochemical Cage Escape Yields

The utilization of visible light to mediate chemical reactions in fluid solutions has applications that range from solar fuel production to medicine and organic synthesis. These reactions are typically initiated by electron transfer between a photoexcited dye molecule (a photosensitizer) and a redox-active quencher to yield radical pairs that are intimately associated within a solvent cage. Many of these radicals undergo rapid thermodynamically favored "geminate" recombination and do not diffuse out of the solvent cage that surrounds them. Those that do escape the cage are useful reagents that may undergo subsequent reactions important to the above-mentioned applications. The cage escape process and the factors that determine the yields remain poorly understood despite decades of research motivated by their practical and fundamental importance. Herein, state-of-the-art research on light-induced electron transfer and cage escape that has appeared since the seminal 1972 review by J. P. Lorand entitled "The Cage Effect" is reviewed. This review also provides some background for those new to the field and discusses the cage escape process of both homolytic bond photodissociation and bimolecular light induced electron transfer reactions. The review concludes with some key goals and directions for future research that promise to elevate this very vibrant field to even greater heights.

Iron-Sensitized Solar Cells (FeSSCs)

ConspectusThe harvesting and conversion of solar energy have become a burning issue for our modern societies seeking to move away from the exploitation of fossil fuels. In this context, dye-sensitized solar cells (DSSCs) have proven to be trustworthy alternatives to silicon-based cells with advantages in terms of transparency and efficiency under low illumination conditions. These devices are highly dependent on the ability of the sensitizer that they contain to collect sunlight and transfer an electron to a semiconductor after excitation. Ruthenium and polypyridine complexes are benchmarks in this field as they exhibit ideal characteristics such as long-lasting metal-ligand charge transfer (MLCT) states and efficient separation between electrons and holes, limiting recombination at the dye-semiconductor interface. Despite all of these advantages, ruthenium is a noble metal, and the development of more sustainable energy devices based on earth-abundant metals is now a must. A quick glance at the periodic table reveals iron as a potential good candidate, since it belongs to the same group of ruthenium, which suggests similar electronic properties. However, striking photophysical differences exist between ruthenium(II) polypyridyl complexes and their Fe(II) analogues, the latter suffering from short-lived MLCT states resulting of their ultrafast relaxation into metal-centered (MC) states. Pyridyl-N-heterocyclic carbenes (pyridylNHC) brought a strong σ-donor character required to promote a higher ligand field splitting of the iron d orbitals. This induces destabilization of the MC states over the MLCT manifold and a consequent slowdown of the excited states deactivation providing iron(II) complexes with tens of picoseconds lifetimes, making them more promising for applications in DSSCs. This Account highlights our recent advances in the development and characterization of iron-sensitized solar cells (FeSSCs) with a focus on the design of efficient sensitizers going from homoleptic to heteroleptic complexes (bearing different anchoring groups) and the tuning of electrolyte composition. Our rational approach led to the best photocurrent and efficiency ever reported for an iron sensitized solar cell (2% PCE and 9 mA/cm2) using a cosensitization process. This work clearly evidences that the solar energy conversion based on iron complex sensitization is now an opened and fruitful route.

Panchromatic light harvesting and record power conversion efficiency for carboxylic/cyanoacrylic Fe(ii) NHC co-sensitized FeSSCs

The co-sensitization of TiO2 by using a combination of carboxylic and thienylcyanoacrylic (ThCA)–Fe(ii) pyridyl-NHC sensitizers produced a panchromatic absorption and the best photocurrent and efficiency ever reported for an FeSSC.

Pseudo-Octahedral Iron(II) Complexes with Near-Degenerate Charge Transfer and Ligand Field States at the Franck-Condon Geometry

Increasing the metal-to-ligand charge transfer (MLCT) excited state lifetime of polypyridine iron(II) complexes can be achieved by lowering the ligand's π* orbital energy and by increasing the ligand field splitting. In the homo- and heteroleptic complexes [Fe(cpmp)₂ ]²⁺ (1²⁺ ) and [Fe(cpmp)(ddpd)]²⁺ (2²⁺ ) with the tridentate ligands 6,2''-carboxypyridyl-2,2'-methylamine-pyridyl-pyridine (cpmp) and N,N'-dimethyl-N,N'-di-pyridin-2-ylpyridine-2,6-diamine (ddpd) two or one dipyridyl ketone moieties provide low energy π* acceptor orbitals. A good metal-ligand orbital overlap to increase the ligand field splitting is achieved by optimizing the octahedricity through CO and NMe units between the coordinating pyridines which enable the formation of six-membered chelate rings. The push-pull ligand cpmp provides intra-ligand and ligand-to-ligand charge transfer (ILCT, LL'CT) excited states in addition to MLCT excited states. Ground and excited state properties of 1²⁺ and 2²⁺ were accessed by X-ray diffraction analyses, resonance Raman spectroscopy, (spectro)electrochemistry, EPR spectroscopy, X-ray emission spectroscopy, static and time-resolved IR and UV/Vis/NIR absorption spectroscopy as well as quantum chemical calculations.

Solar energy conversion using first row d-block metal coordination compound sensitizers and redox mediators

The use of renewable energy is essential for the future of the Earth, and solar photons are the ultimate source of energy to satisfy the ever-increasing global energy demands. Photoconversion using dye-sensitized solar cells (DSCs) is becoming an established technology to contribute to the sustainable energy market, and among state-of-the art DSCs are those which rely on ruthenium(ii) sensitizers and the triiodide/iodide (I3 -/I-) redox mediator. Ruthenium is a critical raw material, and in this review, we focus on the use of coordination complexes of the more abundant first row d-block metals, in particular copper, iron and zinc, as dyes in DSCs. A major challenge in these DSCs is an enhancement of their photoconversion efficiencies (PCEs) which currently lag significantly behind those containing ruthenium-based dyes. The redox mediator in a DSC is responsible for regenerating the ground state of the dye. Although the I3 -/I- couple has become an established redox shuttle, it has disadvantages: its redox potential limits the values of the open-circuit voltage (V OC) in the DSC and its use creates a corrosive chemical environment within the DSC which impacts upon the long-term stability of the cells. First row d-block metal coordination compounds, especially those containing cobalt, and copper, have come to the fore in the development of alternative redox mediators and we detail the progress in this field over the last decade, with particular attention to Cu2+/Cu+ redox mediators which, when coupled with appropriate dyes, have achieved V OC values in excess of 1000 mV. We also draw attention to aspects of the recyclability of DSCs.

Dye-sensitized solar cells based on Fe N-heterocyclic carbene photosensitizers with improved rod-like push-pull functionality

A new generation of octahedral iron(ii)–N-heterocyclic carbene (NHC) complexes, employing different tridentate C^N^C ligands, has been designed and synthesized as earth-abundant photosensitizers for dye sensitized solar cells (DSSCs) and related solar energy conversion applications. This work introduces a linearly aligned push–pull design principle that reaches from the ligand having nitrogen-based electron donors, over the Fe(ii) centre, to the ligand having an electron withdrawing carboxylic acid anchor group. A combination of spectroscopy, electrochemistry, and quantum chemical calculations demonstrate the improved molecular excited state properties in terms of a broader absorption spectrum compared to the reference complex, as well as directional charge-transfer displacement of the lowest excited state towards the semiconductor substrate in accordance with the push–pull design. Prototype DSSCs based on one of the new Fe NHC photosensitizers demonstrate a power conversion efficiency exceeding 1% already for a basic DSSC set-up using only the I⁻/I₃⁻ redox mediator and standard operating conditions, outcompeting the corresponding DSSC based on the homoleptic reference complex. Transient photovoltage measurements confirmed that adding the co-sensitizer chenodeoxycholic acid helped in improving the efficiency by increasing the electron lifetime in TiO₂. Time-resolved spectroscopy revealed spectral signatures for successful ultrafast (<100 fs) interfacial electron injection from the heteroleptic dyes to TiO₂. However, an ultrafast recombination process results in undesirable fast charge recombination from TiO₂ back to the oxidized dye, leaving only 5–10% of the initially excited dyes available to contribute to a current in the DSSC. On slower timescales, time-resolved spectroscopy also found that the recombination dynamics (longer than 40 μs) were significantly slower than the regeneration of the oxidized dye by the redox mediator (6–8 μs). Therefore it is the ultrafast recombination down to fs-timescales, between the oxidized dye and the injected electron, that remains as one of the main bottlenecks to be targeted for achieving further improved solar energy conversion efficiencies in future work.

Iron-based photosensitizers for dye-sensitized solar cells with a rod-like push–pull design. Solar cell performance was limited by ultrafast (sub-ps) recombination, but yielded better performance than the homoleptic parent photosensitizer.

The influence of alkyl chains on the performance of DSCs employing iron(II) N-heterocyclic carbene sensitizers

The photovoltaic performances of DSCs employing two new iron(II) N-heterocyclic carbene (NHC) sensitizers are presented. The presence of n-butyl side chains had a significant impact on DSC performace. The improvement in DSC performance up to 0.93-0.95% was observed for a new heteroleptic sensitizer bearing one carboxylic acid anchoring group. The photovoltaic performance was remarkably affected by sensitization time and by a presence/absence of coadsorbent on the semiconductor surface. The highest photoconversion efficiencies (PCE) were achieved for DSCs sensitized over 17.5 hours without addition of coadsorbents. However, for a shorter dipping time of 4 hours, the presence of chenodeoxycholic acid improved the PCE from 0.46% (no coadsorbents) to 0.74%, respectively. The performance of DSCs based on a new homoleptic complex bearing two n-butyl side chains and a carboxylic acid anchor on each NHC-ligand was improved from 0.05 to 0.29% via changes in dye-bath concentration and sensitization time. The changes in the dye load on the semiconductor surface depending on the sensitization conditions were confirmed using solid-state UV-Vis spectroscopy and thermogravimetric analysis. Electrochemical impedance spectroscopy was used to gain information about the processes occurring at the different interfaces in the DSCs. The impedance response was strongly affected by the immersion time of the photoanodes in the dye-bath solutions. In the case of the homoleptic iron(II) complex, a Gerischer impedance was observed after 17.5 hours immersion. Shorter dipping times resulted in a decrease in the resistance in the system. For the heteroleptic complex, values of the chemical capacitance and electron lifetime were affected by the immersion time. However, the diffusion length was independent of sensitization conditions.

A Series of Iron(II)-NHC Sensitizers with Remarkable Power Conversion Efficiency in Photoelectrochemical Cells*

A series of six new Fe(II)NHC-carboxylic sensitizers with their ancillary ligand decorated with functions of varied electronic properties have been designed with the aim to increase the metal-to- surface charge separation and light harvesting in iron-based dye-sensitized solar cells (DSSCs). ARM130 scored the highest efficiency ever reported for an iron-sensitized solar cell (1.83 %) using Mg²⁺ and NBu₄ I-based electrolyte and a thick 20 μm TiO₂ anode. Computational modelling, transient absorption spectroscopy and electrochemical impedance spectroscopy (EIS) revealed that the electronic properties induced by the dimethoxyphenyl-substituted NHC ligand of ARM130 led to the best combination of electron injection yield and spectral sensitivity breadth.

Electrolyte Tuning in Iron(II)-Based Dye-Sensitized Solar Cells: Different Ionic Liquids and I2 Concentrations

The effects of different I₂ concentrations and different ionic liquids (ILs) in the electrolyte on the performances of dye-sensitized solar cells (DSCs) containing an iron(II) N-heterocyclic carbene dye and containing the I^–/I₃^– redox shuttle have been investigated. Either no I₂ was added to the electrolyte, or the initial I₂ concentrations were 0.02, 0.05, 0.10, and 0.20 M. The short-circuit current density (J_SC), open-circuit voltage (V_OC), and the fill factor (ff) were influenced by changes in the I₂ concentration for all the ILs. For 1-hexyl-3-methylimidazole iodide (HMII), low V_OC and low ff values led to poor DSC performances. Electrochemical impedance spectroscopy (EIS) showed the causes to be increased electrolyte diffusion resistance and charge transfer resistance at the counter electrode. DSCs containing 1,3-dimethylimidazole iodide (DMII) and 1-ethyl-3-methylimidazole iodide (EMII) showed the highest J_SC values when 0.10 M I₂ was present initially. Short alkyl substituents (Me and Et) were more beneficial than longer chains. The lowest values of the transport resistance in the photoanode semiconductor were found for DMII, EMII, and 1-propyl-2,3-dimethylimidazole iodide (PDMII) when no I₂ was added to the initial electrolyte, or when [I₂] was less than 0.05 M. Higher [I₂] led to decreases in the diffusion resistance in the electrolyte and the counter electrode resistance. The electron lifetime and diffusion length depended upon the [I₂]. Overall, DMII was the most beneficial IL. A combination of DMII and 0.1 M I₂ in the electrolyte produced the best performing DSCs with an average maximum photoconversion efficiency of 0.65% for a series of fully-masked cells.

Towards Iron(II) Complexes with Octahedral Geometry: Synthesis, Structure and Photophysical Properties

The control of ligand-field splitting in iron (II) complexes is critical to slow down the metal-to-ligand charge transfer (MLCT)-excited states deactivation pathways. The gap between the metal-centered states is maximal when the coordination sphere of the complex approaches an ideal octahedral geometry. Two new iron(II) complexes (C1 and C2), prepared from pyridylNHC and pyridylquinoline type ligands, respectively, have a near-perfect octahedral coordination of the metal. The photophysics of the complexes have been further investigated by means of ultrafast spectroscopy and TD-DFT modeling. For C1, it is shown that-despite the geometrical improvement-the excited state deactivation is faster than for the parent pseudo-octahedral C0 complex. This unexpected result is due to the increased ligand flexibility in C1 that lowers the energetic barrier for the relaxation of 3MLCT into the 3MC state. For C2, the effect of the increased ligand field is not strong enough to close the prominent deactivation channel into the metal-centered quintet state, as for other Fe-polypyridine complexes.

Photophysics and Photochemistry of Iron Carbene Complexes for Solar Energy Conversion and Photocatalysis

Earth-abundant first row transition metal complexes are important for the development of large-scale photocatalytic and solar energy conversion applications. Coordination compounds based on iron are especially interesting, as iron is the most common transition metal element in the Earth’s crust. Unfortunately, iron-polypyridyl and related traditional iron-based complexes generally suffer from poor excited state properties, including short excited-state lifetimes, that make them unsuitable for most light-driven applications. Iron carbene complexes have emerged in the last decade as a new class of coordination compounds with significantly improved photophysical and photochemical properties, that make them attractive candidates for a range of light-driven applications. Specific aspects of the photophysics and photochemistry of these iron carbenes discussed here include long-lived excited state lifetimes of charge transfer excited states, capabilities to act as photosensitizers in solar energy conversion applications like dye-sensitized solar cells, as well as recent demonstrations of promising progress towards driving photoredox and photocatalytic processes. Complementary advances towards photofunctional systems with both Fe(II) complexes featuring metal-to-ligand charge transfer excited states, and Fe(III) complexes displaying ligand-to-metal charge transfer excited states are discussed. Finally, we outline emerging opportunities to utilize the improved photochemical properties of iron carbenes and related complexes for photovoltaic, photoelectrochemical and photocatalytic applications.

Design and Synthesis of Photoactive Iron N-Heterocyclic Carbene Complexes

The use of iron in photoactive metal complexes has been investigated for decades. In this respect, the charge transfer (CT) states are of particular interest, since they are usually responsible for the photofunctionality of such compounds. However, only recently breakthroughs have been made in extending CT excited state lifetimes that are notoriously short-lived in classical polypyridine iron coordination compounds. This success is in large parts owed to the use of strongly σ-donating N-heterocyclic carbene (NHC) ligands that help manipulating the photophysical and photochemical properties of iron complexes. In this review we aim to map out the basic design principles for the generation of photofunctional iron NHC complexes, summarize the progress made so far and recapitulate on the synthetic methods used. Further, we want to highlight the challenges still existing and give inspiration for future generations of photoactive iron complexes.