CAZ Composite Photocatalysts for H2 Production and Degradation under Visible Light

g-C3N4/Ag-ZnO (CAZ) composite photocatalysts were synthesized successfully by the hydrothermal method. The photocatalytic performance of photocatalysts was assessed through experiments measuring both hydrogen (H2) production and the degradation of methylene blue (MB). The H2 production rate of 60% CAZ reached 2.450 mmol·g-1·h-1, which was 8.5 times that of g-C3N4. 25% CAZ degraded 99.14% of MB dye within 40 min, and its degradation rate constant was 12.4 times that of g-C3N4. CAZ composite photocatalysts have good synergistic properties in degradation and hydrogen production and exhibit better photocatalytic performance. A Z-scheme photocatalytic system mechanism of CAZ has been proposed for the enhanced H2 production and photocatalytic degradation rate.

Construction of Z-scheme Ti/Ga co-doped ZnO heterostructure photocatalyst with graphitic carbon nitride for efficient visible-light-driven dye degradation

Innovative solar-driven heterostructure photocatalysts are promising for removing the organic contaminants in the water environment. In this work, a sequence of well-defined Z-scheme Ti-Ga co-doped ZnO/g-C₃N₄ (TGZ/CN) heterostructure photocatalysts were developed via a simple sol-gel method and the single-phase dispersion method in order to realize the cooperative improvement from the Ti/Ga co-doping and construction of heterostructure. The synthesized samples were analyzed by a variety of characterization techniques, and the photocatalytic activity was assessed by photodegradation of methylene blue (MB) under visible light irradiation. Compared to the ZnO and g-C₃N₄, the TGZ/CN composite demonstrated higher photocatalytic performance for the degradation of MB indicating an efficient photocatalytic degradation rate of 95.4% in 105 min under visible light. Moreover, the TGZ/CN photocatalyst exhibited excellent stability after five cycles of MB photodegradation. Furthermore, the as-prepared composites' possible photocatalytic mechanism was discussed in detail. The improved photocatalytic performance primarily resulted from the effectively reduced band gap of ZnO after Ti/Ga co-doping and the facilitated separation of photoexcited e^-/h⁺ pairs caused by the construction of Z-scheme heterojunction. This work offers novel insights in developing hybrids with highly efficient photocatalytic activity towards future environmental applications.

Ag nanoparticles anchored on NiO octahedrons (Ag/NiO composite): An efficient catalyst for reduction of nitro substituted phenols and colouring dyes

The development of an efficient sustainable catalyst for effective removal of hazardous chemicals, viz. nitrophenols and organic dyes, from wastewater is a challenging task. Herein, facile synthesis of Ag/NiO composites by anchoring Ag nanoparticles (NPs) on NiO octahedrons with different amounts of Ag NPs (AN-5% (5% Ag), AN-10% (10% Ag) and AN-15% (15% Ag)) has been demonstrated. SEM (scanning electron microscopic) and TEM (transmission electron spectroscopic) images ensured the proper anchoring of spherical Ag NPs (particle size = 16.54 ± 1.88 nm) on octahedron particles of NiO, which was also ensured by XPS (X-ray photoelectron spectroscopy) analysis. Moreover, the resulting composites have an average surface area (49-52 m²g^‒1) and pore size (2.39-2.26 nm). All three synthesized Ag/NiO composites (100 μL) catalyzed the complete reduction of para-np (4-nitrophenol: 0.1587 mM) within 2-3 min in the presence of 0.04 M NaBH₄. Among them, AN-5% has been chosen because of the lowest anchored Ag (5%) to obtain the optimized catalyst's amount (50 μL) and concentration of para-np (0.1587 mM). AN-5% also exhibited excellent catalytic activity towards different nitro substituted phenols, viz. ortho-np (2-nitrophenol), meta-np (3-nitrophenol), para-np (4-nitrophenol) and tri-np (2,4,6-trinitrophenol). AN-5% displayed ∼100% catalytic efficiency for reducing meta-np in 2 min with the apparent first order rate constant (k_app) and normalized rate constant (K_nor) as 1.99 s^-1 and 398.14 s^-1 g^-1, respectively. Additionally, AN-5% (29.41 μg mL^-1) reduced >95% of the colouring dyes (10 ppm) such as CONG-R (congo red: 95% in 6 min), METH-O (methyl orange: 97.5% in 7 min), METH-B (methylene blue: 98.3% in 10 min) and RHOD-B (rhodamine B: 99.2% in 5 min). AN-5% not only demonstrated catalytic reduction towards individual pollutants, but also showed excellent activity for reduction of the mixtures of nitrophenols/dyes and for treatment of simulated industrial effluent samples (EFF1, EFF2) and a real industrial sample (textile dye-bath effluent). AN-5% can also be reused up to several cycles with almost same efficiency and followed the Langmuir-Hinshelwood apparent first order kinetics model.

Self-photoreduced Ag0-doped Ag(i)–organic frameworks with efficient visible-light-driven photocatalytic performance

A series of Ag0-doped Ag(i)organic frameworks have been constructed via a facile self-photoreduction strategy and can be applied as efficient photocatalysts for the photocatalytic degradation of methyl orange.

Hot electron injection induced electron–hole plasma lasing in a single microwire covered by large size Ag nanoparticles

In addition to the plasmon-mediated resonant coupling mechanism, plasmon-induced hot electron transfer can provide an alternative approach to construct high-performance optoelectronic devices for various applications.