Metalation of metal-organic frameworks: fundamentals and applications

Metalation of metal-organic frameworks (MOFs) has been developed as a prominent strategy for materials functionalization for pore chemistry modulation and property optimization. By introducing exotic metal ions/complexes/nanoparticles onto/into the parent framework, many metallized MOFs have exhibited significantly improved performance in a wide range of applications. In this review, we focus on the research progress in the metalation of metal-organic frameworks during the last five years, spanning the design principles, synthetic strategies, and potential applications. Based on the crystal engineering principles, a minor change in the MOF composition through metalation would lead to leveraged variation of properties. This review starts from the general strategies established for the incorporation of metal species within MOFs, followed by the design principles to graft the desired functionality while maintaining the porosity of frameworks. Facile metalation has contributed a great number of bespoke materials with excellent performance, and we summarize their applications in gas adsorption and separation, heterogeneous catalysis, detection and sensing, and energy storage and conversion. The underlying mechanisms are also investigated by state-of-the-art techniques and analyzed for gaining insight into the structure-property relationships, which would in turn facilitate the further development of design principles. Finally, the current challenges and opportunities in MOF metalation have been discussed, and the promising future directions for customizing the next-generation advanced materials have been outlined as well.

Ag2O@UiO-66 new thin film as p-n heterojunction: permanent photoreduction of hexavalent Cr

The new nanosphere Ag2O@UiO-66 thin-film was synthesized on a stainless steel mesh surface via an electrophoretic deposition method, and is used as an effective and low-cost photocatalyst using visible light. The synthesized nanocomposite was used to perform photo-reduction of Cr(vi) ions under white light irradiation. The best removal rate (72% after 15 minutes) was obtained by the film with 0.034 grams of deposited composite having relative percentages of Ag2O : UiO-66 of 70 : 30. The interesting obtained results confirm that the p-n heterojunction of the composite is the main cause of the desired charge separation and the photoreduction speed increase. In the following, the resulting compounds were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), transmittance electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), energy diffraction X-ray spectroscopy (EDAX) and the Brunauer, Emmett, and Teller (BET) method. Scavenging studies performed in the presence of familiar scavengers confirmed that superoxide radicals (˙O2-) and dissolved oxygen gas have a significant role in the photocatalytic reduction process.

Preparation of ZIF-8/PAN composite nanofiber membrane and its application in acetone gas monitoring

Znic-based metal-organic framework materials (ZIF-8) show great potential and excellent performance in the fields of sensing and catalysis. However, powdered metal-organic framework makes it easy to lose in the process of application. Herein, we use a simple blending electrostatic spinning method to combine ZIF-8 particles with polyacrylonitrile (PAN) nanofibers. ZIF-8/PAN composite nanofiber membrane. The ZIF-8/PAN nanofiber membrane is characterized by scanning electron microscope (SEM), x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and N₂adsorption-desorption. The results show that the ZIF-8/PAN nanofiber membrane has the characteristic peaks of XRD and FTIR, which are consistent with those of simulated ZIF-8. The specific surface area of ZIF-8/PAN nanofiber membrane increases from 13.5371 to 711.4171 m²g^-1due to the introduction of ZIF-8 particles. The sensor using the nanofiber membrane as the gas sensing layer shows good response and linear correlation to different concentrations of acetone gas. The minimum detection limit of the sensor for acetone is 51.9 ppm. The blank control shows that the response of the sensor to acetone is mainly due to the introduction of ZIF-8 particles. In addition, the sensor also shows a good cyclic response to acetone.

Metal-Organic Framework (MOF) Derivatives as Promising Chemiresistive Gas Sensing Materials: A Review

The emission of harmful gases has seriously exceeded relative standards with the rapid development of modern industry, which has shown various negative impacts on human health and the natural environment. Recently, metal-organic frameworks (MOFs)-based materials have been widely used as chemiresistive gas sensing materials for the sensitive detection and monitoring of harmful gases such as NO_x, H₂S, and many volatile organic compounds (VOCs). In particular, the derivatives of MOFs, which are usually semiconducting metal oxides and oxide-carbon composites, hold great potential to prompt the surface reactions with analytes and thus output amplified resistance changing signals of the chemiresistors, due to their high specific surface areas, versatile structural tunability, diversified surface architectures, as well as their superior selectivity. In this review, we introduce the recent progress in applying sophisticated MOFs-derived materials for chemiresistive gas sensors, with specific emphasis placed on the synthesis and structural regulation of the MOF derivatives, and the promoted surface reaction mechanisms between MOF derivatives and gas analytes. Furthermore, the practical application of MOF derivatives for chemiresistive sensing of NO₂, H₂S, and typical VOCs (e.g., acetone and ethanol) has been discussed in detail.

V2CTX MXene-based hybrid sensor with high selectivity and ppb-level detection for acetone at room temperature

High-performance, room temperature-based novel sensing materials are one of the frontier research topics in the gas sensing field, and MXenes, a family of emerging 2D layered materials, has gained widespread attention due to their distinctive properties. In this work, we propose a chemiresistive gas sensor made from V₂CT_x MXene-derived, urchin-like V₂O₅ hybrid materials (V₂C/V₂O₅ MXene) for gas sensing applications at room temperature. The as-prepared sensor exhibited high performance when used as the sensing material for acetone detection at room temperature. Furthermore, the V₂C/V₂O₅ MXene-based sensor exhibited a higher response (S% = 11.9%) toward 15 ppm acetone than pristine multilayer V₂CT_x MXenes (S% = 4.6%). Additionally, the composite sensor demonstrated a low detection level at ppb levels (250 ppb) at room temperature, as well as high selectivity among different interfering gases, fast response-recovery time, good repeatability with minimal amplitude fluctuation, and excellent long-term stability. These improved sensing properties can be attributed to the possible formation of H-bonds in multilayer V₂C MXenes, the synergistic effect of the newly formed composite of urchin-like V₂C/V₂O₅ MXene sensor, and high charge carrier transport at the interface of V₂O₅ and V₂C MXene.

Recent trends and challenges with the synthesis of membranes: Industrial opportunities towards environmental remediation

The industrial and agricultural revolution has posed a serious and potential threat to environment. The industrial and agricultural pollutants are directly released into the environment. This issue has clinched the scientists to work on different materials in order to decontaminate the environment. Among all other techniques, the membrane filtration technology has fascinated researchers to overcome the pollution by its promising features. This review elaborated various membrane synthesis approaches along with their mechanism of filtration, their applications towards environmental remediation such as removal of heavy metals, degradation of dyes, pharma waste, organic pollutants, as well as gas sensing applications. The membrane synthesis using different sort of materials in which inorganic, carbon materials, polymers and metal organic framework (MOFs) are highlighted. These materials have been involved in synthesis of membrane to make it more cost effective and productive to remove such hazardous materials from wastewater. Based on the reported literature, it has been found that inorganic and polymer membranes are facing issues of brittleness and swelling prior to the industrial scale applications related to the high temperature and pressure which needs to be addressed to enhance the permeation performance.

Zr-Doped h-BN Monolayer: A High-Sensitivity Atmospheric Pollutant-Monitoring Sensor

In the post-epidemic era, industrial production has gradually recovered, and the attendant air pollution problem has attracted much attention. In this study, the Zr-doped h-BN monolayer (Zr-BN) is proposed as a new gas sensor for air pollution. Based on density functional theory (DFT), we calculated and compared the adsorption energies (Eads), geometric parameters, the shortest distance between gas and substrate (dsub/gas), density of states (DOS), electron localization function (ELF), charge density difference (CDD), band structure, band gap energy change rate (ΔEg), and sensitivity (S) of Zr-BN adsorption systems (SO2F2, SOF2, SO2, NO, and CO2 adsorption systems). The results show that Zr-BN had strong adsorption and high sensitivity to the above-mentioned polluted gases, and the sensitivity was in the order of SOF2 > SO2F2 > CO2 > SO2 > NO. Therefore, this study provides a theoretical basis for the preparation of Zr-BN gas sensors and provides new ideas and methods for the development of other gas sensors.

Gas sensing based on metal-organic frameworks: Concepts, functions, and developments

Effective detection of pollutant gases is vital for protection of natural environment and human health. There is an increasing demand for sensing devices that are equipped with high sensitivity, fast response/recovery speed, and remarkable selectivity. Particularly, attention is given to the designability of sensing materials with porous structures. Among diverse kinds of porous materials, metal-organic frameworks (MOFs) exhibit high porosity, high degree of crystallinity and exceptional chemical activity. Their strong host-guest interactions with guest molecules facilitate the application of MOFs in adsorption, catalysis and sensing systems. In particular, the tailorable framework/composition and potential for post-synthetic modification of MOFs endow them with widely promising application in gas sensing devices. In this review, we outlined the fundamental aspects and applications of MOFs for gas sensors, and discussed various techniques of monitoring gases based on MOFs as functional materials. Insights and perspectives for further challenges faced by MOFs are discussed in the end.

A fluorescence nanoplatform for the determination of hydrogen peroxide and adenosine triphosphate via tuning of the peroxidase-like activity of CuO nanoparticle decorated UiO-66

A novel nanocomposite of CuO nanoparticle-modified Zr-MOF (CuO/UiO-66) was synthesized and developed as a fluorescence nanoplatform for H₂O₂ and adenosine triphosphate (ATP) via the "turn-on-off" mode in the presence of terephthalic acid (TA). The structure of CuO/UiO-66 was thoroughly characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and other techniques. The CuO/UiO-66 with enhanced peroxidase-like (POD) activity obtained due to the Zr⁴⁺ in UiO-66 is beneficial to the aggregation of CuO NPs on its surface. As a result, the strengthened fluorescence at 425 nm with the excitation of 300 nm was found due to the highly fluorescent species of TAOH. This is produced by the oxidation of TA by ·OH that came from the catalysis of H₂O₂ via the peroxidase mimic of CuO/UiO-66. Hence the modification of CuO NPs on porous UiO-66 can provide a friendly and sensitive physiological condition for H₂O₂ detection. However, upon addition of ATP, the fluorescence intensity of TAOH at 425 nm effectively declined owing to the formation of complexation of Zr⁴⁺-ATP and the interaction of CuO to ATP which hampers the catalytic reaction of CuO/UiO-66 to H₂O₂. The specific interaction induced "inhibition of the peroxide-like activity" endows the sensitive and selective recognition of ATP. The detection limits were 16.87 ± 0.2 nM and 0.82 ± 0.1 nM, and linear analytical ranges were 0.02-100 μM and 0.002-30 μM for H₂O₂ and ATP, respectively. The novel strategy was successfully applied to H₂O₂ and ATP determination in serum samples with recoveries of 97.2-103.8% for H₂O₂ and 97.6-101.7% for ATP, enriching the avenue to design functional MOFs and providing new avenue of multicomponent bioanalysis.

Metal-organic frameworks for advanced transducer based gas sensors: review and perspectives

The development of gas sensing devices to detect environmentally toxic, hazardous, and volatile organic compounds (VOCs) has witnessed a surge of immense interest over the past few decades, motivated mainly by the significant progress in technological advancements in the gas sensing field. A great deal of research has been dedicated to developing robust, cost-effective, and miniaturized gas sensing platforms with high efficiency. Compared to conventional metal-oxide based gas sensing materials, metal-organic frameworks (MOFs) have garnered tremendous attention in a variety of fields, including the gas sensing field, due to their fascinating features such as high adsorption sites for gas molecules, high porosity, tunable morphologies, structural diversities, and ability of room temperature (RT) sensing. This review summarizes the current advancement in various pristine MOF materials and their composites for different electrical transducer-based gas sensing applications. The review begins with a discussion on the overview of gas sensors, the significance of MOFs, and their scope in the gas sensing field. Next, gas sensing applications are divided into four categories based on different advanced transducers: chemiresistive, capacitive, quartz crystal microbalance (QCM), and organic field-effect transistor (OFET) based gas sensors. Their fundamental concepts, gas sensing ability towards various gases, sensing mechanisms, and their advantages and disadvantages are discussed. Finally, this review is concluded with a summary, existing challenges, and future perspectives.

Highly Selective and Sensitive Detection of Volatile Sulfur Compounds by Ionically Conductive Metal-Organic Frameworks

High selectivity to specific analyte is essential for chemical sensors but difficult to achieve. For most chemical sensors, although the response to the target analyte can be more significant than interference analytes, they still show obvious responses to the interference analytes. Here, highly selective chemical sensors are developed with negligible responses to other interference vapors. Instead of the widely investigated electronically conductive metal-organic frameworks (EC-MOFs), ionically conductive MOFs (IC-MOFs) are used as the sensing materials, and the unique interaction between the ion charge carrier and the analyte is utilized to achieve high sensing selectivity. Through the modulation of the metal nodes (Cu, Co, Ni, Zn, Mg) and organic ligands (H₂ TCPP, H₂ THPP, H₄ BTEC), sensor arrays based on a set of IC-MOFs are fabricated and achieve highly selective detection toward volatile sulfur compounds (VSCs). H₂ S and CH₃ SH can be selectively detected at concentrations down to 1 ppb and 1 ppm, respectively. The facile preparation and low cost endow the device with disposability. These results suggest new approaches for the development of highly selective chemical sensors.

Highly Selective Self-Powered Organic-Inorganic Hybrid Heterojunction of a Halide Perovskite and InGaZnO NO2 Sensor

Self-powered sensors can lead to disruptive advances in self-sustainable sensing systems that are imperative for evolving human lifestyles. For the first time, we demonstrate the fabrication of a heterojunction sensor using p-type hybrid-halide perovskites (CH₃NH₃PbBr₃) and an n-type semiconducting metal oxide thin film [InGaZnO (IGZO)] for the detection of NO₂ gas and power generation. Combining the excellent photoelectric properties of perovskites and the remarkable gas-sensing properties of IGZO at room temperature, the devised sensors generate open-circuit voltage and modulate according to the ambient NO₂ concentration. The major challenge in devising self-powered gas sensors is to attain harvesting capability and selectivity simultaneously, owing to perovskites reactivity in the presence of oxygen and humidity. In this work, we developed a novel approach and fabricated a heterojunction sensor using parylene-c as an additional layer to curb the cross-sensitivity and to enhance the selectivity of the sensor. Even under the low concentrations of NO₂, the developed sensor exhibits remarkable sensitivity, selectivity, and repeatability. The devices are sensitive and robust even under extreme humidity conditions (80% R_H) and synthetic air. The devised sensor configuration is one way to eliminate the cross-sensitivity issue of the perovskite-based devices and serves as a reference for the development of self-powered sensors.

Ultrafast and nanomolar level detection of H2S in aqueous medium using a functionalized UiO-66 metal-organic framework based fluorescent chemosensor

Here, we present a 4-nitrophenyl functionalized Zr-UiO-66 MOF (MOF = metal-organic framework) and its applications towards the selective, sensitive and rapid detection of H₂S both in the aqueous medium and vapour phase. The MOF material was synthesized using the 2-(nitrophenoxy)terepththalic acid (H₂BDC-O-Ph-NO₂) linker and ZrCl₄ salt in the presence of a benzoic acid modulator. It was carefully characterized by thermogravimetric analysis (TGA), elemental analysis, powder X-ray diffraction (PXRD), FT-IR spectroscopy and surface area analysis. Noticeable thermal stability up to a temperature of 390 °C under air and the considerable chemical stability in different liquid media (H₂O, 1 M HCl, glacial acetic acid, NaOH in the pH = 8 to 10 range) confirmed the robustness of the MOF. The BET surface area (1040 m² g^-1) indicated the porous nature of the MOF. Remarkable selectivity of the MOF towards H₂S over other potential congeners of H₂S was observed in the aqueous medium. A very high fluorescence increment (∼77 fold) was observed after adding an aqueous Na₂S solution to the MOF suspension. The MOF probe displayed the lowest limit of detection (12.58 nM) among the existing MOF-based chemosensors of H₂S. Furthermore, it exhibited a very quick (60 s) response towards H₂S detection. The MOF compound could also detect H₂S in the vapour phase as well as in real water samples. Furthermore, we developed inexpensive MOF-coated paper strips for the naked-eye sensing of H₂S. A thorough investigation was carried out in order to elucidate the fluorescence turn-on sensing mechanism.

Functionalization of zirconium-based metal-organic frameworks for gas sensing applications

The functionalization and incorporation of noble metals in metal-organic frameworks have been widely used as efficient methods to enhance their applicability. Herein, a sulfone-functionalized Zr-MOF framework labeled Zr-BPDC-SO₂ (BPDC-SO₂ =dibenzo[b,d]-thiophene-3,7-dicarboxylate 5,5-dioxide) and its Pd-embedded composite were efficiently synthesized by adjusting their functional groups. The obtained compounds were characterized to assess their potential for gas sensing applications. X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, specific surface area measurements, and thermogravimetric analysis were employed to characterize the new sensor materials. The gas sensing properties of the novel functionalized sensor materials were systematically investigated under various temperature, concentration, and gas type conditions. Owing to the strong hydrogen bonds of the sulfonyl groups and Zr₆ clusters in the framework with the hydroxyl groups of ethanol, Zr-BPDC-SO₂ emerged as an effective sensor for ethanol detection. In addition, Pd@Zr-BPDC-SO₂ exhibited efficient hydrogen sensing performance, in terms of sensor dynamics and response. More importantly, the material showed a higher sensing response to hydrogen than to other gases, highlighting the important role of Pd in the Zr-MOF-based hydrogen sensor. The results of the sensing tests carried out in this study highlight the promising potential of the present materials for practical gas monitoring applications.

A highly selective electron affinity facilitated H2S sensor: the marriage of tris(keto-hydrazone) and an organic field-effect transistor

Conjugated polymers (CPs) are emerging as part of a promising future for gas-sensing applications. However, some of their limitations, such as poor specificity, humidity sensitivity and poor ambient stability, remain persistent. Herein, a novel combination of a polymer-monomer heterostructure, derived from a CP (PDVT-10) and a newly reported monomer [tris(keto-hydrazone)] has been integrated in an organic field-effect transistor (OFET) platform to sense H₂S selectively. The hybrid heterostructure shows an unprecedented sensitivity (525% ppm^-1) and high selectivity toward H₂S gas. In addition, we demonstrated that the PDVT-10/tris(keto-hydrazone) OFET sensor has the lowest limit of detection (1 ppb), excellent ambient stability (∼5% current degradation after 150 days), good response-recovery behavior, and exceptional electrical behavior and gas response reproducibility. This work can help pave the way to incorporate futuristic gas sensors in a multitude of applications.

Recent advances in energy-saving chemiresistive gas sensors: A review

With the tremendous advances in technology, gas-sensing devices are being popularly used in many distinct areas, including indoor environments, industries, aviation, and detectors for various toxic domestic gases and vapors. Even though the most popular type of gas sensor, namely, resistive-based gas sensors, have many advantages over other types of gas sensors, their high working temperatures lead to high energy consumption, thereby limiting their practical applications, especially in mobile and portable devices. As possible ways to deal with the high-power consumption of resistance-based sensors, different strategies such as self-heating, MEMS technology, and room-temperature operation using especial morphologies, have been introduced in recent years. In this review, we discuss different types of energy-saving chemisresitive gas sensors including self-heated gas sensors, MEMS based gas sensors, room temperature operated flexible/wearable sensor and their application in the fields of environmental monitoring. At the end, the review will be concluded by providing a summary, challenges, recent trends, and future perspectives.

Semi-transparent graphite films growth on Ni and their double-sided polymer-free transfer

Nanorange thickness graphite films (NGFs) are robust nanomaterials that can be produced via catalytic chemical vapour deposition but questions remain regarding their facile transfer and how surface topography may affect their application in next-generation devices. Here, we report the growth of NGFs (with an area of 55 cm² and thickness of ~ 100 nm) on both sides of a polycrystalline Ni foil and their polymer-free transfer (front- and back-side, in areas up to 6 cm²). Due to the catalyst foil topography, the two carbon films differed in physical properties and other characteristics such as surface roughness. We demonstrate that the coarser back-side NGF is well-suited for NO₂ sensing, whereas the smoother and more electrically conductive front-side NGF (2000 S/cm, sheet resistance − 50 Ω/sq) could be a viable conducting channel or counter electrode in solar cells (as it transmits 62% of visible light). Overall, the growth and transfer processes described could help realizing NGFs as an alternative carbon material for those technological applications where graphene and micrometer-thick graphite films are not an option.

MOFs-carbon hybrid nanocomposites in environmental protection applications

The demand for green engineering environmentally friendly nanomaterials had made carbon nanotube a suitable material to keep metal-organic frameworks (MOFs) in the application of wastewater treatment and air pollution monitoring systems. This review summarizes many of the recent research accomplishments in the synthesis of MOFs and MOFs-carbon hybrid nanocomposites for various applications such as wastewater treatment and removal of hazardous gases (CO, SO₂, H₂S and NH₃) with emphasis on MOF/CNTs composites. This review focuses on the efficient removal of pollutants from the environment using adsorption techniques. Another important application of MOFs composite discussed in this review is sensor materials for environmental pollution.

Zirconium doping level modulation combined with chalconylthiourea organic frameworks induced enhancement of luminescence applied to cell imaging

Derivatives of a zirconium metal–organic framework as the center polymer material with a chalconylthiourea polymer (CT) were applied to cell imaging.