Characteristics and performance of layered two-dimensional materials under doping engineering

In recent years, doping engineering, which is widely studied in theoretical and experimental research, is an effective means to regulate the crystal structure and physical properties of two-dimensional materials and expand their application potential. Based on different types of element dopings, different 2D materials show different properties and applications. In this paper, the characteristics and performance of rich layered 2D materials under different types of doped elements are comprehensively reviewed. Firstly, 2D materials are classified according to their crystal structures. Secondly, conventional experimental methods of charge doping and heterogeneous atom substitution doping are summarized. Finally, on the basis of various theoretical research results, the properties of several typical 2D material representatives under charge doping and different kinds of atom substitution doping as well as the inspiration and expansion of doping systems for the development of related fields are discussed. Through this review, researchers can fully understand and grasp the regulation rules of different doping engineering on the properties of layered 2D materials with different crystal structures. It provides theoretical guidance for further improving and optimizing the physical properties of 2D materials, improving and enriching the relevant experimental research and device application development.

Electronic structure and optical properties of B-, N-, and BN-doped black phosphorene using the first-principles

The structural stability, electronic structure, and optical properties of BN-doped black phosphorene systems at different concentrations were investigated using a density generalized theory approach based on the first principles. BN-doped black phosphorene was found to be more stable than B and N atom doping. With the increase of doping concentration, the stability of the structure gradually decreases, and the structure of the system with 25% doping concentration is the most stable. The intrinsic and N-doped black phosphorenes are direct bandgap semiconductors, and B and BN doping make the black phosphorene change from direct bandgap to the indirect bandgap. The total density of states is mainly contributed by the p-state electrons of the B and P atoms, and the N atoms have a role in the local density of states with little contribution to the overall one. The black phosphorene undergoes charge transfer between the B and N atoms. The amount of charge transfer increases with the increase of doping concentration. The BN-doped black phosphorene system is blue-shifted at the absorption and reflection peaks compared to the intrinsic black phosphorene system. From the dielectric constant, it is found that the doped system is shifted towards higher energy at the highest peak, leading to an increase in the intensity of the electric field generated by light, which is beneficial to increase the efficiency of photovoltaic power generation. The photoconductivity decreases and shifts toward higher energy after doping, with the most pronounced performance at BN doping concentrations of 12.5% and 25%.

Metastable Metallic Phase of a Bilayer Blue Phosphorene Induced by Interlayer Bonding and Intralayer Charge Redistributions

We have carried out diffusion Monte Carlo calculations for an A₁B_-1-stacked bilayer blue phosphorene to find that it undergoes a semiconductor-metal transition as the interlayer distance decreases. While the most stable bilayer structure is a semiconducting one with two monolayers coupled through a weak van der Waals interaction, the metallic bilayer at a shorter interlayer distance is found to be only metastable. This is in contrast to a recent theoretical prediction based on a random phase approximation that the metallic phase would be the most stable bilayer configuration of blue phosphorene. Our analysis of charge density distributions reveals that the metastable metallic phase is induced by interlayer chemical bonding and intralayer charge redistributions. This study enriches our understanding of interlayer binding of a blue phosphorene and contributes to the establishment of correct energetic order between its different phases, which will be essential in devising an experimental pathway for a metallic phosphorene.

Enhanced photocatalytic properties of a chemically modified blue phosphorene

It is high time to placate the peak demand for an efficient, economic and green fuel in the form of H2 through photocatalytic water splitting. Several low dimensional materials have been explored for their photocatalytic properties on account of their surface to volume ratio. The present study illustrates the excellent photocatalytic potential of a two-dimensional material, viz. a chemically tempered blue-phosphorene sheet, with single atom thickness and high carrier mobility. Metal-free element, sulphur, is explored as a dopant in a 32-atom blue-phosphorene sheet. The dopant is inserted at three locations viz. central, edge and central edge positions with varying concentrations from 3.125% to 18.75% (corresponding to n = 1 to 6 sulphur atoms within a 32-atom blue-phosphorene sheet, P32-n S n ). The cohesive energy studies predict the higher stability of even number S doped sheets as compared to their odd counterparts. Photocatalytic activity is studied in terms of band gap and band alignment for different concentrations of the former. Studies reveal that edge doping demonstrates better water molecule activation independent of S atom concentration. The edge doped systems not only provide the chemical activity to activate water, but also show feasible HER overpotentials of 1.24-1.29 eV at neutral medium. Finally, this work opens up a driving lead of non-corrosive catalysts for water molecule splitting.

Recent advances of monoelemental 2D materials for photocatalytic applications

As a sustainable environmental governance strategy and energy conversion method, photocatalysis has considered to have great potential in this field due to its excellent optical properties and has become one of the most attractive technologies today. Among 2D materials, the emerging two-dimensional (2D) monoelemental materials mainly distributed in the -IIIA, -IVA, -VA and -VIA groups and show excellent performance in solar energy conversion due to their graphene-like 2D atomic structure and unique properties, thereby drawing increasing attention. This review briefly summarizes the preparation processes and fundamental properties of 2D single-element nanomaterials, as well as various modification strategies and adjustment mechanisms to enhance their photocatalytic properties. In particular, this article comprehensively discusses the related practical applications of 2D single-element materials in the field of photocatalysis, including photocatalytic degradation for contaminants removal, photocatalytic pathogen inactivation, photocatalytic fouling control and photocatalytic energy conversion. This review will provide some new opportunities for the rational design of other excellent photocatalysts based on 2D monoelemental materials, as well as present tremendous novel ideas for 2D monoelemental materials in other environmental conservation and energy-related applications, such as supercapacitors, electrocatalysis, solar cells, and so on.

New graphane: inspiration from the structure correlation with phosphorene

The application of phosphorene and graphane in different photoelectric devices and energy reserves has attracted wide attention. Here, we investigated the Raman spectra, phonon dispersion and vibration modes of four phosphorene monolayer polymorphs and four graphane allotropes with the corresponding crystal structures to analyze the structure correlation between them. Based on the "three identical, one divergent" pattern found in the sp3 hybrid atomic orbitals of phosphorene and graphane, four new graphane conformers with different hydrogenation modes named γδ-G, αγ-G, βγ-G and αδ-G are successfully predicted. Among these four new graphane conformers, βγ-G has the lowest binding energy, which is only 0.02 eV per atom higher than β-G, the most stable one among all graphane theoretically predicted. This means that βγ-G may co-exist with β-G during the experimental synthesis of graphane, which can be distinguished from the side views with threefold structures for βγ-G and twofold structures for β-G. All the new graphane conformers are direct-band-gap semiconductors with band gaps more than 3 eV, which indicate their great potential in optoelectronic devices. Furthermore, three of them exhibit in-plane negative Poisson's ratios under tensile deformation.

A systematic investigation of the catalytic performances of monolayer carbon nitride nanosheets C1-xNx

Graphitic carbon nitrides (CNs) are potential candidate materials for the electro-catalytic industry due to their unique physical and chemical properties. However, to date, a full understanding of the electro-catalytic properties of CNs is still lacking. Herein, by using density functional theory calculations, we systematically investigate the catalytic performances in the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), N2 reduction reaction (NRR), and CO2 reduction reaction (CO2RR) of monolayer graphitic carbon nitrides (C1-xNx), C3N (x = 1/4), C2N (x = 1/3), and g-C3N4 (x = 4/7). We also evaluated the NRR activity of B doped C1-xNx, and the CO2RR activity of Cu and Pd modified C1-xNx. The cohesive energy and ab initio molecular dynamics (AIMD) results show that C3N, C2N, and g-C3N4 are stable at room temperature. The C3N-C1 site is predicted to deliver the best HER catalytic performance with a reaction Gibbs free energy (ΔGH*) of -0.03 eV (close to the ideal value (0 eV)). Among the studied C1-xNx materials, the C3N-C2 site is predicted to possess a favorable ηOER of 0.82 V for OER. Pure C3N, C2N, and g-C3N4 are not suitable for NRR and CO2RR. Due to the strong hybridization between the N 2p orbital and the B 2p orbital, the NRR performances of B doped BN-C2N, BN-C3N, and BN-g-C3N4 are greatly enhanced, with corresponding overpotential ηNRR of 0.57 V, 0.70 V, and 0.72 V, respectively. The transition metals Cu and Pd can enhance the CO2RR activity of C3N, C2N, and g-C3N4. The limiting potentials UL of pure C3N, C2N, and g-C3N4 are 0.96 V, 0.86 V, and 2.37 V, respectively, while these values are 0.63 V, 0.68 V, and 0.77 V with Cu or Pd modification. This work provides deep understanding of the catalytic properties of monolayer C1-xNx and guidance for synthesizing higher activity catalysts in the future.

Surface-defect-engineered photocatalyst for nitrogen fixation into value-added chemical feedstocks

Surface-defect-engineered photocatalyst for nitrogen fixation.