Flexible Copper Films Modification via Spontaneous Reduction of Aryldiazonium Gold Salts: Unraveling Surface Properties and Energy Profile

In this study, we report the modification of flexible copper films via the spontaneous reduction of aryldiazonium gold salts [X-4-C6H4N≡N]AuCl4 (X═COOH, NO2). The electroless modification involves dipping of flexible copper films in the aryldiazonium gold solutions for a few seconds, under ambient conditions, followed by a washing step with deionized water to obtain a mechanically robust gold-aryl coating. The chemical composition, morphology, electronic structure, and optical properties of the gold-aryl layer and the flexibility of the modified copper films are supported by the results from X-ray photoelectron spectroscopy (XPS), electrochemistry, contact angle, scanning electron microscopy (SEM), and ultraviolet photoelectron spectroscopy (UPS). XPS surface analysis showed metallic gold in addition to C-C, C-O/C-N, and C═O functional groups from the grafted aryls. Cu 2p showed metallic copper as a major component and a small amount of Cu(II) ions. Wettability studies showed that Au-COOH@Cu increased the contact angle of the bare copper films from 68.0 ± 0.7° to 82.0° ± 0.7°, while Au-NO2@Cu increased the contact angle to 134.0° ± 0.3°. UPS energy profile analysis of [HOOC-4-C6H4N≡N]AuCl4 (valence band maximum = 1.91 eV) exhibited greater reducibility than [O2N-4-C6H4N≡N]AuCl4 (valence band maximum = 2.91 eV). The lower ionization potential of [HOOC-4-C6H4N≡N]AuCl4 (IP = 4.33 eV) enhanced the reactivity upon copper film contact, potentially inducing efficient energy level alignment, compared with [O2N-4-C6H4N≡N]AuCl4 (IP = 5.62 eV). UPS results were further supported by electrochemistry investigation which revealed that [HOOC-4-C6H4N≡N]AuCl4 is easily reducible compared with [O2N-4-C6H4N≡N]AuCl4. The findings presented here hold significant implications for developing flexible copper films and pave the way for future advancements in electronic material modification for industrial applications.

Catalyst Design through Grafting of Diazonium Salts-A Critical Review on Catalyst Stability

In the pursuit of designing a reusable catalyst with enhanced catalytic activity, recent studies indicate that electrochemical grafting of diazonium salts is an efficient method of forming heterogeneous catalysts. The aim of this review is to assess the industrial applicability of diazonium-based catalysts with particular emphasis on their mechanical, chemical, and thermal stability. To this end, different approaches to catalyst production via diazonium salt chemistry have been compared, including the immobilization of catalysts by a chemical reaction with a diazonium moiety, the direct use of diazonium salts and nanoparticles as catalysts, the use of diazonium layers to modulate wettability of a carrier, as well as the possibility of transforming the catalyst into the corresponding diazonium salt. After providing descriptions of the most suitable carriers, the most common deactivation routes of catalysts have been discussed. Although diazonium-based catalysts are expected to exhibit good stability owing to the covalent bond created between a catalyst and a post-diazonium layer, this review indicates the paucity of studies that experimentally verify this hypothesis. Therefore, use of diazonium salts appears a promising approach in catalysts formation if more research efforts can focus on assessing their stability and long-term catalytic performance.

Green preparation of silver nanocluster composite AgNCs@CF-g-PAA and its application: 4-NP catalytic reduction and hydrogen production

4-Nitrophenol (4-NP) is a serious organic environmental pollutant. Conversion of 4-nitrophenol to 4-aminophenol (4-AP) by catalytic hydrogenation is an effective solution. In this work, a catalyst (AgNCs@CF-g-PAA) loaded with silver nanoclusters (AgNCs) was prepared by radiation technique. Firstly, the template polyacrylic acid (PAA) was grafted onto the cotton fiber (CF) by radiation grafting technique to obtain a solid template (CF-g-PAA). After that, AgNCs were synthesized in situ on CF-g-PAA by radiation reduction, and the composite material AgNCs@CF-g-PAA was obtained directly. AgNCs@CF-g-PAA has an obvious photoluminescence phenomenon, which is attributed to the stable AgNCs binding to the carboxyl on the PAA molecular chain. Due to the extremely small size of AgNCs, AgNCs@CF-g-PAA has good catalytic characteristics. The prepared AgNCs@CF-g-PAA catalyst has a very high catalytic rate for the hydrogenation of 4-NP. Even at high concentrations of 4-NP, AgNCs@CF-g-PAA can still maintain a high catalytic rate. At the same time, the AgNCs@CF-g-PAA catalyst can also be used to catalyze the rapid hydrolysis of sodium borohydride, which is conducive to hydrogen production. In summary, we have prepared a practical catalyst AgNCs@CF-g-PAA with high catalytic performance based on cheap raw materials and a simple synthesis route, which provides a catalyst candidate for the treatment of water contaminant 4-NP and the production of hydrogen from sodium borohydride.

Correlation notice on the electrochemical dealloying and antibacterial properties of gold-silver alloy nanoparticles

Galvanic replacement reaction was used in the synthesis of bimetallic gold-silver alloy nanoparticles (Au-Ag NPs), where pre-synthesized Ag nanoparticles-polyvinylpyrrolidone (AgNPs-PVP) were used to reduce the aryldiazonium tetrachloroaurate(III) salt in water. TEM images and EDS elemental analysis showed the formation of spherical Au-Ag NPs with sizes of 12.8 ± 4.9 nm and 25.6 ± 14.4 nm for corresponding Au-Ag ratios and termed as Au_0.91Ag_0.09 and Au_0.79Ag_0.21, respectively, with different concentrations of the gold precursor. The hydrodynamic sizes measured using dynamic light scattering are 46.4 nm and 74.8 nm with corresponding zeta potentials of - 44.56 and - 25.09 mV in water, for Au_0.91Ag_0.09 and Au_0.79Ag_0.21 respectively. Oxidative leachability of Ag ion studies from the starting AgNPs-PVP in 1 M NaCl showed a significant decrease in the plasmon peak after 8 h, indicating the complete dissolution of Ag ions, however, there is enhanced oxidation resistivity of Ag from Au-Ag NPs even after 24 h. Electrochemical studies on glassy carbon electrodes displayed a low oxidation peak in aqueous solutions of 20 mM KCl at 0.16 V and KNO₃ at 0.33 V vs. saturated calomel electrode (SCE). We studied the antibacterial activity of Au-Ag alloy nanoparticles against gram-positive Staphylococcus aureus, Staphylococcus epidermidis, Enterococcus faecalis, and gram-negative Escherichia coli, Salmonella typhimurium, and Pseudomonas aeruginosa. Our findings demonstrated superior antibacterial activity of Au-Ag NPs compared with AgNPs-PVP. Moreover, the nanoparticles inhibited the S. epidermidis biofilm formation.

Single-Stranded DNA Recognition over Fluorescent Gold-Aryl Nanoparticles

Fluorescence labeling of gold-aryl nanoparticles, AuNPs-COOH, was achieved by the covalent derivatization with dansyl chloride (DNS-Cl) reagent (5-naphthalene-1-sulfonyl chloride) for potential ssDNA recognition. The fluorescent gold nanoparticles of AuNPs-C6H4-4-COO-dansyl (AuNPs-DNS) of spherical shape and a size of 19.3 ± 8.3 nm were synthesized in a carbonate-bicarbonate buffer (pH = 10.6) at 37 °C. The fluorescence emission at 475 nm was acquired using fluorescence spectroscopy and investigated using time-resolved photoluminescence. The conjugation of ssDNA to AuNPs-DNS using the freeze-thaw and salt-aging methods was confirmed by fluorescence emission quenching, gel electrophoresis separation, and lifetime decrease. Conjugated ssDNA to AuNPs-DNS using the freeze-thaw method was more efficient than the salt-aging method. The purity of ssDNA upon conjugation was measured with optical density, and the obtained A260/A280 ratio was in the range of 1.7–2.0. This research can be applied to other nucleotide recognition and theranostics.

Conceptual Developments of Aryldiazonium Salts as Modifiers for Gold Colloids and Surfaces

Modified colloids and flat surfaces occupy an important place in materials science research due to their widespread applications. Interest in the development of modifiers that adhere strongly to surfaces relates to the need for stability under ambient conditions in many applications. Diazonium salts have evolved as the primary choice for the modification of surfaces. The term "diazonics" has been introduced in the literature to describe "the science and technology of aryldiazonium salt-derived materials". The facile reduction of diazonium salts via chemical or electrochemical processes, irradiation stimuli, or spontaneously results in the efficient modification of gold surfaces. Robust gold-aryl nanoparticles, where gold is connected to the aryl ring through bonding to carbon and films modified by using diazonium salts, are critical in electronics, sensors, medical implants, and materials for power sources. Experimental and theoretical studies suggest that gold-carbon interactions constructed via chemical reactions with diazonium salts are stronger than nondiazonium surface modifiers. This invited feature article summarizes the conceptual development of recent studies of diazonium salts in our laboratories and others with a focus on the surface modification of gold nanostructures, flat surfaces and gratings, and their applications in nanomedicine engineering, sensors, energy, forensic science, and catalysis.

Arylated gold nanoparticles have no effect on the adipogenic differentiation of MG-63 cells nor regulate any key signaling pathway during the differentiation

OBJECTIVE

MG-63 cells that have osteoblastic and adipogenic differentiation potential were evaluated for internalization, and adipogenic differentiation in the presence and absence of the covalently functionalized aryl gold nanoparticles (AuNPs-C6H4-4-COOH).

RESULTS

Inductively coupled plasma, flow cytometry and confocal microscopy analyses confirmed that gold nanoparticles were easily internalized by MG-63 cells. The MG-63 cells were differentiated into adipocytes without gold-aryl nanoparticles and with the gold-aryl nanoparticles at 5 µM concentration in both induction and maintenance media. The lipid content assay and the relative expressions of PPAR-γ, ADR1, GLUT1 and GLUT4 genes showed no significant variation with and without the gold nanoparticles treatment. Differential phosphorylation levels of 43 kinases phosphorylation sites were evaluated using the human phospho-kinase array to assess the effect of the gold nanoparticles on the signaling pathways during the differentiation. No kinase phosphorylation site was differentially phosphorylated with two or more folds after the nanoparticles treatment after the first day as well as at the end of MG-63 cells differentiation. The gold-aryl nanoparticles do not affect MG-63 cells differentiation into adipocytes neither do they affect any key signaling pathway. These properties make these gold nanoparticles suitable for future drug delivery and medical applications.

FRET-based fluorescent probe for drug assay from amino acid@gold-carbon nanoparticles

Biocompatible and luminescent nanostructures synthesized by capping gold-carbon nanoparticles (HOOC-4-C₆H₄-AuNPs) with amino acids tyrosine, tryptophan, and cysteine were used for the quantitative estimation of ranitidine (RNH), a peptic ulcer and gastroesophageal reflux drug. We applied a fluorescence quenching mechanism to investigate the viability of the energy transfer based on gold-carbon nanosensors. Förster resonance energy transfer (FRET) calculations showed a donor-acceptor distance of 1.69 nm (Tyr@AuNPs), 2.27 nm (Trp@AuNPs), and 2.32 nm (Cys@AuNPs). The constant time-resolved fluorescence lifetime measurements supported the static quenching nature. This method was successfully utilized in the detection and quantification of RNH, with a limit of detection (LOD) of 0.174, 0.56, and 0.332 μM for Tyr@AuNP, Trp@AuNP, and Cys@AuNP bioconjugates, respectively. This approach was also successful in the quantification of RNH in spiked serum samples.

Completely green synthesis of rose-shaped Au nanostructures and their catalytic applications

A novel protocol for the one-pot, template/seed-free, and completely green synthesis of rose-shaped Au nanostructures with unique three-dimensional hierarchical structures was developed.

Efficient synthesis of amino acids capped gold nanoparticles from easily reducible aryldiazonium tetrachloroaurate(III) salts for cellular uptake study

Biomimetic synthesis of gold nanoparticles (GNPs) is critical in biomedical applications. Gold bioconjugates were fabricated by capping the water-dispersible gold-carbon nanoparticles with tyrosine, tryptophan and cysteine amino acids. Incubation of the water-soluble and easily reducible aryldiazonium gold(III) salt [HOOC-4-C₆H₄N≡N]AuCl₄ with amino acids at room temperature formed a purple color over a few minutes with tryptophan and tyrosine and over two hours with cysteine. Rarely that cysteine is capable of reducing gold(III) precursors; however, a cysteine capped gold bioconjugate was synthesized and characterized in this study. Capping GNPs with amino acids was confirmed by high resolution transmission electron microscopy (TEM) and agarose gel electrophoresis. Depending on the amino acid, synthesized particles size was 27.2 ± 5.4 nm, 14.6 ± 7.7 nm and 8.6 ± 2.6 nm for tyrosine, tryptophan and cysteine, respectively. The amino acids capped GNPs showed negligible cytotoxicity to human dermal normal fibroblast cell lines. The highly water dispersible bioconjugates were studied for in vitro cellular uptake by HeLa cancer cells using confocal laser scan microscopy (CLSM) after being labelled with FITC (GNPs-COOH-FITC) and the nuclei were counter stained with DAPI fluorescent dyes. The biomimetic route for the synthesis of the amino acids reduced gold-carbon nanoparticles will benefit the applications in biomedical devices and biosensors.

Plant Extracts Activated by Cold Atmospheric Pressure Plasmas as Suitable Tools for Synthesis of Gold Nanostructures with Catalytic Uses

Because cold atmospheric pressure plasma (CAPP)-based technologies are very useful tools in nanomaterials synthesis, in this work we have connected two unique in their classes approaches-a CAPP-based protocol and a green synthesis method in order to obtain stable-in-time gold nanoparticles (AuNPs). To do so, we have used an aqueous Gingko biloba leave extract and an aqueous Panax ginseng root extract (untreated or treated by CAPP) to produce AuNPs, suitable for catalytical uses. Firstly, we have adjusted the optical properties of resulted AuNPs, applying UV/Vis absorption spectrophotometry (UV/Vis). To reveal the morphology of Au nanostructures, transmission electron microscopy (TEM) in addition to energy dispersive X-ray scattering (EDX) and selected area X-ray diffraction (SAED) was utilized. Moreover, optical emission spectrometry (OES) in addition to a colorimetric method was used to identify and determine the concentration of selected RONS occurring at the liquid-CAPP interface. Additionally, attenuated total reflectance Fourier transform-infrared spectroscopy (ATR FT-IR) was applied to reveal the active compounds, which might be responsible for the AuNPs surface functionalization and stabilization. Within the performed research it was found that the smallest in size AuNPs were synthesized using the aqueous P. ginseng root extract, which was activated by direct current atmospheric pressure glow discharge (dc-APGD), generated in contact with a flowing liquid cathode (FLC). On the contrary, taking into account the aqueous G. biloba leave extract, the smallest in size AuNPs were synthesized when the untreated by CAPP aqueous G. biloba leave extract was involved in the Au nanostructures synthesis. For catalytical studies we have chosen AuNPs produced using the aqueous P. ginseng root extract activated by FLC-dc-APGD as well as AuNPs synthesized using the aqueous G. biloba leave extract also activated by FLC-dc-APGD. Those NPs were successfully used as homogenous catalysts for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP).

Diazonium Gold Salts as Novel Surface Modifiers: What Have We Learned So Far?

The challenges of diazonium salts stabilization have been overcome by their isolation as metal salts such as tetrachloroaurate(III). The cleavage of molecular nitrogen from diazonium salts even at very low potential or on reducing surfaces by fine tuning the substituents on the phenyl ring expanded their applications as surface modifiers in forensic science, nanomedicine engineering, catalysis and energy. The robustness of the metal–carbon bonding produced from diazonium salts reduction has already opened an era for further applications. The integration of experimental and calculations in this field catalyzed its speedy progress. This review provides a narrative of the progress in this chemistry with stress on our recent contribution, identifies potential applications, and highlights the needs in this emerging field. For these reasons, we hope that this review paper serves as motivation for others to enter this developing field of surface modification originating from diazonium salts.