Multifaceted Catalytic ROS-Scavenging via Electronic Modulated Metal Oxides for Regulating Stem Cell Fate

Developing reactive oxygen species (ROS)-scavenging nanostructures to protect and regulate stem cells has emerged as an intriguing strategy for promoting tissue regeneration, especially in trauma microenvironments or refractory wounds. Here, an electronic modulated metal oxide is developed via Mn atom substitutions in Co₃ O₄ nanocrystalline (Mn-Co₃ O₄ ) for highly efficient and multifaceted catalytic ROS-scavenging to reverse the fates of mesenchymal stem cells (MSCs) in oxidative-stress microenvironments. Benefiting from the atomic Mn-substitution and charge transfer from Mn to Co, the Co site in Mn-Co₃ O₄ displays an increased ratio of Co²⁺ /Co³⁺ and improved redox properties, thus enhancing its intrinsic and broad-spectrum catalytic ROS-scavenging activities, which surpasses most of the currently reported metal oxides. Consequently, the Mn-Co₃ O₄ can efficiently protect the MSCs from ROS attack and rescue their functions, including adhesion, spreading, proliferation, and osteogenic differentiation. This work not only establishes an efficient material for catalytic ROS-scavenging in stem-cell-based therapeutics but also provides a new avenue to design biocatalytic metal oxides via modulation of electronic structure.

Recent advances in Co-based co-catalysts for efficient photocatalytic hydrogen generation

Recent progress in photocatalytic hydrogen generation reaction highlights the critical role of co-catalysts in enhancing the solar-to-fuel conversion efficiency of diverse band-matched semiconductors. Because of the compositional flexibility, adjustable microstructure, tunable crystal phase and facet, cobalt-based co-catalysts have stimulated tremendous attention as they have high potential to promote hydrogen evolution reaction. However, a comprehensive review that specifically focuses on these promising materials has not been reported so far. Therefore, this present review emphasizes the recent progress in the pursuing of highly efficient Co-based co-catalysts for water splitting, and the advances in such materials are summarized through the analysis of structure-activity relationships. The fundamental principles of photocatalytic hydrogen production are profoundly outlined, followed by an elaborate discussion on the crucial parameters influencingthe reaction kinetics. Then, the co-catalytic reactivities of various Co-based materials involving Co, Co oxides, Co hydroxides, Co sulfides, Co phosphides and Co molecular complexes, etc, are thoroughly discussed when they are coupled with host semiconductors, with an insight towards the ultimateobjective of achieving a rationally designed photocatalyst for enhancing water splitting reaction dynamics. Finally, the current challenge and future perspective of Co-based co-catalysts as the promising noble-metal alternative materials for solar hydrogen generation are proposed and discussed.

Nanostructured Molybdenum Oxides from Aluminium-Based Intermetallic Compound: Synthesis and Application in Hydrogen Evolution Reaction

Characterized by a large surface area to volume ratio, nanostructured metal oxides possess unique chemical and physical properties with applications in electronics, catalysis, sensors, etc. In this study, Mo₃Al₈, an intermetallic compound, has been used as a precursor to obtain nanostructured molybdenum oxides. It was prepared into ribbons by arc-melting and melt-spinning techniques. Single and double-step free corrosion of the as-quenched material have been studied in 1 M KOH, 1 M HF and 1.25 M FeCl₃ at room temperature. In both cases, nanostructured molybdenum oxides were obtained on a surface layer a few microns thick. Two of the as-prepared samples were tested for their electrocatalytic capability for hydrogen evolution reaction (HER) in 0.5 M H₂SO₄ giving low onset potential (−50 mV, −45 mV), small Tafel slopes (92 mV dec⁻¹, 9 mV dec⁻¹) and high exchange current densities (0.08 mA cm⁻², 0.35 mA cm⁻² respectively). The proposed nanostructured molybdenum oxides are cost-effective and sustainable due to the cheap and abundant starting material used and the simple synthetic route, paving the way for their possible application as HER electrocatalysts.

Rationally Designed CdS-Based Ternary Heterojunctions: A Case of 1T-MoS2 in CdS/TiO2 Photocatalyst

As promising heterojunction photocatalysts, the binary CdS-based heterojunctions were investigated extensively. In most of the reported CdS-based heterojunctions, however, electrons come from the semiconductor with wide band gap (e.g., TiO2) would limit the visible-light absorption of CdS and hence lower the performance. In this work, we introduced 1T-MoS2 to form a novel ternary heterojunction, namely CdS/1T-MoS2/TiO2, in which 1T-MoS2 has more positive conduction band than CdS and TiO2. The hydrogen evolution rate of CdS/1T-MoS2/TiO2 reaches 3.15 mmol g-1 h-1, which is approximately 12 and 35 times higher than that of pure CdS and CdS/TiO2 binary heterojunction under the same conditions, respectively. This performance enhancement could be attributed to the presence of 1T-MoS2 and a plausible mechanism is proposed based on photoelectrochemical characterizations. Our results illustrate that the performance of CdS-based heterojunctions for solar hydrogen evolution can be greatly improved by appropriate materials selection.

Simple and Facile Fabrication of Anion-Vacancy-Induced MoO3−X Catalysts for Enhanced Hydrogen Evolution Activity

Advanced catalysts for clean hydrogen generation and storage offer an attractive possibility for developing a sustainable and ecofriendly future energy system. Transition metal oxides (TMO) are appealing candidates to be largely considered as electrode catalysts. However, for practical applications, there are still challenges—the intrinsic catalytic properties of TMOs should be further improved and TMOs should be synthesized by practical routes for cost-effective and scalable production of catalysts. Therefore, finding promising ways to fabricate highly active TMOs with outstanding electrochemical hydrogen evolution performance is required. Here, we present a direct and facile synthetic approach to successfully provide highly efficient MoO3−X catalysts with electrochemically active oxygen vacancies through a one-step thermal activation process on a Mo metal mesh. Variations in the oxidation states of molybdenum oxides can significantly increase the active sites of the catalysts and improve the electrochemical activity, making these oxide compounds suitable for hydrogen evolution reaction (HER). Compared to the bare Mo mesh and fully oxidized Mo (MoO3) electrodes, the fabricated MoO3−X electrode exhibits better electrochemical performance in terms of overpotentials and Tafel slope, as well as the electrochemical 1000 cycling stability, confirming the improved HER performance of MoO3−X. This provides new insight into the simple procedure suitable for the large-production supply.

Facet-dependent activity of hematite nanocrystals toward the oxygen evolution reaction

Hematite showed facet-dependent OER activity and its origin was investigated based on in situ UV-vis absorption measurements and theoretical calculations.

Solid solution ZnW1−xMoxO4 for enhanced photocatalytic H2 evolution

ZnW_1−xMo_xO₄ and n–n heterojunction ZnW_1−xMo_xO₄/CdS complexes exhibited photocatalytic hydrogen evolution activity superior to that of pristine ZnWO₄.