Binary and Halide-free Catalyst Systems Based on Al/Ga/In Aminopyridylbisphenolate Complexes for the Cycloaddition of Epoxides and CO2

Group 13 complexes bearing an aminopyridylbisphenol ligand have been prepared [ML-X; L = ligand, M = Al (X = Cl and Br), Ga (X = Cl, Br, and I), or In (X = Cl)]. The structures of the complexes containing the chloride ligand (ML-Cl; M = Al, Ga, and In) have been directly compared through an X-ray crystallography study, with differences in the monomeric or dimeric nature of their structures observed. All of the complexes obtained have been studied as potential catalysts for the synthesis of cyclic carbonates from epoxides and CO2. It has been found that the indium complex, as part of a traditional binary catalyst system (catalyst + tetra-butylammonium halide cocatalyst), displays the highest catalytic activity and is active under rather mild reaction conditions (balloon pressure of CO2). Meanwhile, it has been found that the GaL-I complex is a competent single-component catalyst (no need for addition of a cocatalyst) at more elevated reaction temperatures and pressures. A full substrate scope has been performed with both developed catalyst systems to demonstrate their applicability. In addition to the experimental results, a density functional theory study was performed on both catalyst systems. These results explain both why the indium catalyst is the most active under binary catalyst system conditions and how the gallium catalyst with an iodide (GaL-I) is able to act as a single-component catalyst in contrast to the indium-based complex.

Non-covalent interactions in molecular architectures and solvent-free catalytic activity towards CO2 fixation of mononuclear Co(III) complexes installed on modified Schiff base ligands

A set of mononuclear cobalt(III) octahedral complexes {[Co(LH)(acac)] (Co-1H), [Co(LBr)(acac)] (Co-1Br), and [Co(LNO2)(acac)] (Co-1NO2)} were synthesized using new-generation N/O donors, maleonitrile-tethered, tetradentate heteroscorpionate half-reduced Schiff base ligands, 2-((E)-2-hydroxybenzylideneamino)-3-(pyridin-2-ylmethylamino)maleonitrile (H2LH), 2-((E)-(5-bromo-2-hydroxybenzylidene)amino)-3-((pyridin-2-ylmethyl)amino)maleonitrile (H2LBr), and 2-((E)-2-hydroxy-5-nitrobenzylideneamino)-3-(pyridin-2-ylmethylamino)maleonitrile (H2LNO2). All the compounds were well characterized spectroscopically and structurally. The non-covalent interactions present in the lattice of Co-complexes were studied in detail to explain the molecular architecture using the Hirshfeld surface (HS) analysis. The catalytic activity of CO2 fixation towards epoxides under mild and solvent-free conditions was demonstrated. The synthesized complexes are catalysts that are well-active towards the CO2 activation under ambient conditions, whereas most of the reported catalysts require harsh conditions.

Real-time monitoring polymerization degree of organic photovoltaic materials toward no batch-to-batch variations in device performance

Polymerization degree plays a vital role in material properties. Previous methodologies of molecular weight control generally cannot suppress or alleviate batch-to-batch variations in device performance, especially in polymer solar cells. Herein, we develop an in-situ photoluminescence system in tandem with a set of analysis and processing procedures to track and estimate the polymerization degree of organic photovoltaic materials. To support the development of this protocol, we introduce polymer acceptor PYT constructed by near-infrared Y-series small molecule acceptors via Stille polymerization, and shed light on the correlations between molecular weight, spectral parameters, and device efficiencies that enable the design of the optical setup and confirm its feasibility. The universality is verified in PYT derivatives with stereoregularity and fluoro-substitution as well as benzo[1,2-b:4,5-b']dithiophene-based polymers. Overall, our result provides a tool to tailor suitable conjugated oligomers applied to polymer solar cells and other organic electronics for industrial scalability and desired cost reduction.

Controlled synthesis of polycarbonate diols and their polylactide block copolymers using amino-bis(phenolate) chromium hydroxide complexes

A diamine-bis(phenolate) chromium(III) complex, CrOH[L] ([L] = dimethylaminoethylamino-N,N-bis(2-methylene-4,6-tert-butylphenolate)), 2, in the presence of tetrabutylammonium hydroxide effectively copolymerizes CO2 and cyclohexene oxide (CHO) into a polycarbonate diol. The resultant low molar mass (6.3 kg mol-1) diol is used to initiate ring-opening polymerization of rac-lactide with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) giving ABA-type block copolymers with good molar mass control through varying rac-LA-to-diol loadings and with narrow dispersities. As the degree of rac-LA incorporation increases, the glass transition temperatures (Tg) are found to decrease, whereas decomposition temperatures (Td) increase. (Diphenylphosphonimido)triphenylphosphorane (Ph2P(O)NPPh3) was used as a neutral nucleophilic cocatalyst with 2, giving phosphorus-containing polycarbonates with an Mn value of 28.5 kg mol-1, a dispersity of 1.13, a Tg value of 110 °C and a Td value of over 300 °C. A related Cr(III) complex (4) having a methoxyethyl pendent group rather than a dimethylaminoethyl group was structurally characterized as a hydroxide-bridged dimer.

Cobalt complexes with α-amino acid ligands catalyze the incorporation of CO2 into cyclic carbonates

Arguably one of the largest research areas involving carbon dioxide (CO₂) fixation is the coupling of CO₂ to epoxides to form cyclic carbonates and polycarbonates. In this sense, there is an ever-increasing demand for the development of higher-performing catalytic systems that could counterbalance sustainability and energy efficiency in the production of cyclic carbonates. The use of abundant first-row transition metals combined with naturally occurring amino acids may be an ideal catalytic platform to fulfill this demand. Nevertheless, detailed information on the interactions between metal centers and natural products as catalysts in this transformation is lacking. Here a series of Co(III) amino acid catalysts operating in a binary system showed outstanding performance for the coupling reaction of epoxides and CO₂. Nine new complexes of the type trans(N)-[Co(aa)₂(bipy)]Cl (aa: ala, asp, lys, met, phe, pro, ser, tyr, and val) were used to explore the structure-activity relationship influenced by the complex outer coordination sphere, and its effect on the catalytic activity in the coupling reaction of CO₂ and epoxides.

Dinuclear Nickel Complexes Using Hexadentate Benzothiazole-Based Diamine-Bisphenolate Ligands: Highly Active Catalysts for Copolymerization of Carbon Dioxide with Epoxides

We reported for the first time the utilization of hexadentate benzothiazole-based diamine-bisphenolate ligands to synthesize structurally well-characterized dinickel dicarboxylate complexes and studied their catalysis for copolymerization of carbon dioxide with epoxides. Dinickel carboxylate complexes having a 1,3-diamine-bridged backbone were demonstrated to be high-performance catalysts for alternating copolymerization of CO₂ and cyclohexene oxide (CHO) with high product selectivity. Particularly, acetate-supported nickel complex 2 enabled us to promote such CO₂-copolymerization of this kind with a maximum turnover frequency of up to 2600 h^-1 and gave good molecular weight controllability under high-pressure conditions. It is worth noting that bimetallic Ni catalyst 2 was also capable of mediating the catalytic CO₂-polymerization of alicyclic epoxides at atmospheric pressure. Kinetic investigations of CO₂/CHO copolymerization by 2 allowed us to determine the rate equation of -d[CHO]/dt = k_p[2]¹[CHO]¹, and such catalysis exhibited a first-order dependence on both dinickel complex and CHO concentrations.

Synthesis, Characterization, and Catalytic Study of Amine-Bridged Bis(phenolato) Co(II) and Co(II/III)-M(I) Complexes (M = K or Na)

Co(II) complexes 1-3 bearing amine-bridged bis(phenolato) complexes have been synthesized through reactions of bis(phenols) with CoCl₂ or Co(OAc)₂. Oxidation of the Co(II) complex with air resulted in partial oxidation, generating mixed valence Co(II/III) complexes 4 and 5. In addition, due to the presence of alkali compounds (KOAc and NaOMe), 4 and 5 formed as Co-alkali metal heterometallic complexes, which are the first example of mixed valence Co(II/III)-M(I) (M = K or Na) complexes. Complexes 1-5 showed good activity in the cycloaddition of epoxides and CO₂ under atmospheric pressure, generating cyclic carbonates in 40-99% yields. Co(II/III)-Na(I) complex 5 performed better in reactions of bulkier substrates, underlining the enhanced activity of mixed valence Co-alkali metal heterometallic complexes. On the contrary, complex 5 showed limited activity in copolymerization of epoxide and CO₂.

Towards a selective synthetic route for cobalt amino acid complexes and their application in ring opening polymerization of rac-lactide

Catalysts based on cobalt amino acids and 2,2 bipyridine (bipy) present an attractive and cost-effective alternative as ring opening polymerization catalysts, yet this system remains underexplored despite the advantageous coordination properties of amino acids and bipy as ligands combined with the variety of accessible oxidation states and coordination geometries of cobalt. Here, metal complexes of type [Co(aa)2(bipy)] with amino acids (aa: glycine, leucine and threonine) as ligands are reported. The complexes were characterized spectroscopically (IR, UV-vis and 1H, 13C NMR for diamagnetic species), and by MS spectrometry and elemental analysis. The data reveal that the 2,2 bipyridine acts as a neutral bidentate donor coordinating to the metal ion through two nitrogen atoms and the amino acid acts as a bidentate ligand coordinating through the carboxylate and amino group forming a stable five membered ring and a pseudo-octahedral geometry around the Co center. The activity of the complexes for the ring opening polymerization (ROP) of rac-lactide is presented. The complexes are effective initiators for the ROP of rac-lactide (K obs = 9.05 × 10-4 s-1) at 100 : 1 [rac-lactide] : [catalyst] 1 M overall concentration of lactide in toluene at 403 K.

Recent Developments in Ring-Opening Copolymerization of Epoxides With CO2 and Cyclic Anhydrides for Biomedical Applications

The biomedical applications of polyesters and polycarbonates are of interest due to their potential biocompatibility and biodegradability. Confined by the narrow scope of monomers and the lack of controlled polymerization routes, the biomedical-related applications of polyesters and polycarbonates remain challenging. To address this challenge, ring-opening copolymerization (ROCOP) has been exploited to prepare new alternating polyesters and polycarbonates, which would be hard to synthesize using other controlled polymerization methods. This review highlights recent advances in catalyst development, including the emerging dinuclear organometallic complexes and metal-free Lewis pair systems. The post-polymerization modification methods involved in tailoring the biomedical functions of resultant polyesters and polycarbonates are summarized. Pioneering attempts for the biomedical applications of ROCOP polyesters and polycarbonates are presented, and the future opportunities and challenges are also highlighted.

Syntheses, Characterization, and Application of Tridentate Phenoxyimino-Phenoxy Aluminum Complexes for the Coupling of Terminal Epoxide with CO2: From Binary System to Single Component Catalyst

A series of binuclear aluminum complexes 1–3 supported by tridentate phenoxyimino-phenoxy ligands was synthesized and used as catalysts for the coupling reaction of terminal epoxide with carbon dioxide. The aluminum complex 1, which is catalytically inactive toward the coupling of epoxide with CO2 by itself, shows moderate activity in the presence of excess nucleophiles or organic bases at high temperature. In sharp contrast to complex 1, bifunctional complexes 2 and 3, which incorporate tertiary amine groups as the built-in nucleophile, are able to efficiently transform terminal epoxide with CO2 to corresponding cyclic carbonates as a sole product by themselves at 100 °C. The number of amine groups on the ligand skeleton and the reaction temperature exert a great influence on the catalytic activity. The bifunctional complexes 2 and 3 are also active at low carbon dioxide pressure such as 2 atm or atmospheric CO2 pressure. Kinetic studies of the coupling reactions of chloropropylene oxide/CO2 and styrene oxide/CO2 using bifunctional catalysts under atmospheric pressure of CO2 demonstrate that the coupling reaction has a first-order dependence on the concentration of the epoxide.

NNC-Scorpionate Zirconium-Based Bicomponent Systems for the Efficient CO2 Fixation into a Variety of Cyclic Carbonates

Two new derivatives of the bis(3,5-dimethylpyrazol-1-yl)methane modified by introduction of organosilyl groups on the central carbon atom, one of which bearing a chiral fragment, have been easily prepared. We verified the potential utility of these compounds through the reaction with [Zr(NMe₂)₄] for the preparation of novel zirconium complexes in which an ancillary bis(pyrazol-1-yl)methanide acts as a robust monoanionic tridentate scorpionate in a κ³-NNC chelating mode, forming strained four-membered heterometallacycles. These κ³-NNC-scorpionate zirconium amides were investigated as catalysts in combination with tetra-n-butylammonium bromide as cocatalyst for CO₂ fixation into five-membered cyclic carbonate products. The study has led to the development of an efficient zirconium-based bicomponent system for the selective cycloaddition reaction of CO₂ with epoxides. Kinetics investigations confirmed apparent first-order dependence on the catalyst and cocatalyst concentrations. In addition, this system displays very broad substrate scope, including mono- and disubstituted substrates, as well as the challenging biorenewable terpene derived limonene oxide, under mild and solvent-free conditions.

Synthesis and characterization of di-nuclear bis(benzotriazole iminophenolate) cobalt complexes: catalysis for the copolymerization of carbon dioxide with epoxides

A family of di-nuclear bis(benzotriazole iminophenolate) (BiIBTP) cobalt complexes containing diverse ancillary carboxylate derivatives have been synthesized and structurally characterized. The one-pot synthesis of the BiIBTP ligand precursor with cobalt perchlorate salt (2.0 equiv.) and carboxylic acid derivatives (2.0 or 5.0 equiv.) in the presence of triethylamine (5.0 equiv.) under refluxing methanolic solution generated bimetallic di-carboxylate Co(ii)/Co(ii) complexes [(^C83CBiIBTP)Co₂(O₂CR)₂] (R = C₆H₅ (1), C₆F₅ (2), 4-CF₃-C₆H₄ (3), 4-OMe-C₆H₄ (4), CF₃ (5)) in ≧65% yields. Interestingly, the Co(ii)/Co(iii) mixed-valence complex 6 resulted from the treatment of 1 with silver perchlorate (1.0 equiv.) as the oxidizing agent under an O₂-atmosphere in 50% yield. The crystal structure of 6 reveals an ionic and di-nuclear benzoate species composed of a cationic moiety formulated as [(^C83CBiIBTP)Co₂(O₂CC₆H₅)₂]⁺ and a counterbalanced perchlorate anion, and both metal atoms are attributed to hexa-coordinated cobalt ions with varied coordination environments. Catalysis results of CO₂/epoxide copolymerization indicated that complex 1 was more efficient than 2-6 where compound 6 was shown to be the least active. Co complex 1 incorporating benzoate coligands was demonstrated to effectively catalyze the CO₂-copolymerization of cyclohexene oxide (CHO), 4-vinyl-1,2-cyclohexene oxide or cyclopentene oxide, producing the associated CO₂-based polycarbonates with >99% carbonate repeated units under optimal conditions. Not only the controllable character of complex 1 for CO₂/CHO copolymerization is enabled, but also 1 has been shown to catalyze such a copolymerization in the "immortal" manner. Using the same di-cobalt catalyst in combination with excess ratios of neopentyl glycol (up to 150 equiv.) as the chain transfer agent could give low molecular weight poly(cyclohexene carbonate) polyols with monomodal molecular weight distributions. This work offers the facilely prepared di-nuclear cobalt complexes as catalysts for the efficient catalysis of CO₂-copolymerization.