Reinterpreting the Intercalation-Conversion Mechanism of FeP Anodes in Lithium/Sodium-Ion Batteries from Evolution of the Magnetic Phase

Batteries with intercalation-conversion-type electrodes tend to achieve high-capacity storage, but the complicated reaction process often suffers from confusing electrochemical mechanisms. Here, we reinterpreted the essential issue about the potential of the conversion reaction and whether there is an intercalation reaction in a lithium/sodium-ion battery (LIB/SIB) with the FeP anode based on the evolution of the magnetic phase. Especially, the ever-present intercalation process in a large voltage range followed by the conversion reaction with extremely low potential was confirmed in FeP LIB, while it is mainly the conversion reaction for the sodium storage mechanism in FeP SIB. The insufficient conversion reaction profoundly limits the actual capacity to the expectedly respectable value. Accordingly, a graphene oxide modification strategy was proposed to increase the reversible capacity of FeP LIB/SIB by 99% and 132%, respectively. The results facilitate the development of anode materials with a high capacity and low operating potential.

Graphene cladded cobalt phosphide nanoparticles with a sandwich structure by plasma for lithium and sodium storage

Graphene cladded cobalt phosphide nanoparticles with a sandwich structure are synthesized using Ar-H2-P plasma. In situ phosphorization and graphene reduction are achieved at the same time. Benefitting from the sandwich structure and heterointerface between CoP and RGO, the electrode delivered a high reversible capacity and durable lifespan for both lithium and sodium storage.

NiFe-LDH/MXene nano-array hybrid architecture for exceptional capacitive lithium storage

Layered double hydroxides (LDHs) have great advantages in the domain of energy storage because of their exchangeable anions and large specific surface area. Nevertheless, the shortcomings of their poor electrical conductivity, easy stacking of nanosheets, and large volume variation in the cycling processes lead to unsatisfactory cycling stability and rate performance, which severely limits their further application. Therefore, we generated homogeneous nanoarrays of NiFe-LDH on the surface of Ti₃C₂T_x-MXene by a refluxing process. The resulting NiFe-LDH/MXene-500 hybrid material was applied as an anode of a lithium-ion battery (LIB) and exhibited a discharge capacity of 894.8 mA h g^-1 at 200 mA g^-1 (over 300 cycles) and could maintain a reversible capacity of 547.1 mA h g^-1 even at 1 A g^-1. With the addition of MXene, the volume increases of the NiFe-LDH/MXene hybrid materials were also significantly alleviated. The thickness of the NiFe-LDH/MXene-500 electrode only increased by 31% after 50 cycles, which was far better than the prepared NiFe-LDH electrode. On the hand, the synergistic interaction of NiFe-LDH and MXene could stabilize the structure, reduce the activation barrier of ion/electron diffusion, and promote electron transfer in the electrode. MXene with high conductivity can be used as electrical and ionic conductance media to promote the transformation reaction of NiFe-LDH. According to the detailed kinetic analysis, the capacitance control behavior is the main electrochemical reaction of NiFe-LDH/MXene electrodes.

Iron Phosphide Confined in Carbon Nanofibers as a Free-Standing Flexible Anode for High-Performance Lithium-Ion Batteries

Iron phosphide with high specific capacity has emerged as an appealing candidate for next-generation lithium-ion battery anodes. However, iron phosphide could undergo conversion reactions and generally suffer from a rapid capacity degradation upon cycling due to its structure pulverization. Chemomechanical breakdown of iron phosphide due to its rigidity has been a challenge to fully realizing its electrochemical performance. To address this challenge, we report here on an enticing opportunity: a flexible, free-standing iron phosphide anode with Fe₂P nanoparticles confined in carbon nanofibers may overcome existing challenges. For the synthesis, we introduce a facile electrospinning strategy that enables in situ formation of Fe₂P within a carbon matrix. Such a carbon matrix can effectively minimize the structure change of Fe₂P particles and protect them from pulverization, allowing the electrodes to retain a free-standing structure after long-term cycling. The produced electrodes showed excellent electrochemical performance in lithium-ion half and full cells, as well as in flexible pouch cells. These results demonstrate the successful development of iron phosphide materials toward high capacity, light weight, and flexible energy storage.

Spray-dried assembly of 3D N,P-Co-doped graphene microspheres embedded with core-shell CoP/MoP@C nanoparticles for enhanced lithium-ion storage

The advancement of novel synthetic approaches for micro/nanostructural manipulation of transition metal phosphide (TMP) materials with precisely controlled engineering is crucial to realize their practical use in batteries. Here, we develop a novel spray-drying strategy to construct three-dimensional (3D) N,P co-doped graphene (G-NP) microspheres embedded with core-shell CoP@C and MoP@C nanoparticles (CoP@C⊂G-NP, MoP@⊂G-NP). This intentional design shows a close correlation between the microstructural G-NP and chemistry of the core-shell CoP@C/MoP@C nanoparticle system that contributes towards their anode performance in lithium-ion batteries (LIBs). The obtained structure features a conformal porous G-NP framework prepared via the co-doping of heteroatoms (N,P) that features a 3D conductive highway that allows rapid ion and electron passage and maintains the overall structural integrity of the material. The interior carbon shell can efficiently restrain volume evolution and prevent CoP/MoP nanoparticle aggregation, providing excellent mechanical stability. As a result, the CoP@C⊂G-NP and MoP@⊂G-NP composites deliver high specific capacities of 823.6 and 602.9 mA h g^-1 at a current density of 0.1 A g^-1 and exhibit excellent cycling stabilities of 438 and 301 mA h g^-1 after 500 and 800 cycles at 1 A g^-1. The present work details a novel approach to fabricate core-shell TMPs@C⊂G-NP-based electrode materials for use in next-generation LIBs and can be expanded to other potential energy storage applications.

Core-shell GaP@C nanoparticles with a thin and uniform carbon coating as a promising anode material for rechargeable lithium-ion batteries

Transition metal phosphides are used as anode materials for lithium-ion batteries because of their high theoretical capacity and low polarization. In this work, a core-shell GaP@C nanocomposite was successfully synthesized by a simple chemical vapor deposition (CVD) method, utilizing commercial GaP as the raw material and xylene as the carbon source. The uniform thin carbon shell could alleviate the volumetric variation and improve the conductivity of the inner GaP. When used as an anode in lithium-ion batteries, the GaP@C nanocomposite has a capacity of 812 mA h g-1 at a current density of 0.5 A g-1 after 100 cycles. At a high current density of 2 A g-1, the GaP@C anode delivers a good capacity value of 1087 mA h g-1.