Electrochemical analysis of asymmetric supercapacitors based on BiCoO3@g-C3N4 nanocomposites

Supercapacitors are gaining popularity these days because of their good cycle stability, superior specific capacitance, high power density, and energy density. Herein, we report the synthesis of bismuth cobalt oxide (BiCoO3) combined with graphitic carbon nitride (g-C3N4) by the hydrothermal method. The BiCoO3@g-C3N4 nanocomposite was well characterized using XRD, FE-SEM, FT-IR, and DRS-UV techniques. The supercapacitor properties of the BiCoO3@g-C3N4 nanocomposite were then studied using cyclic voltammetry, galvanic charging-discharging, and impedance spectroscopy techniques. Due to the synergistic effect, BiCoO3@g-C3N4 showed a high specific capacitance value of 341 F g-1 at a current density of 1 A g-1 and excellent retention of specific capacitance (98.82%) after 1000 cycles and a high power density of 1125 W kg-1. Using the impedance spectroscopy technique, the charge transfer resistance of BiCoO3, g-C3N4, and BiCoO3@g-C3N4 was measured. BiCoO3@g-C3N4 showed a low charge transfer resistance compared with BiCoO3 and g-C3N4. The asymmetric supercapacitor (ASC) device was prepared using activated carbon (negative side) and BiCoO3@g-C3N4 (positive side) electrodes. It showed a specific capacitance of 129 F g-1 at 1 A g-1, power density 2800 W kg-1 and energy density 35 W h kg-1. Finally, we conclude that, due to the high specific capacitance, good cycle retention, fast redox activity, and low charge transfer resistance BiCoO3@g-C3N4 is a good electrode material for energy storage applications.

Quantum magnetic phenomena in engineered heterointerface of low-dimensional van der Waals and non-van der Waals materials

Investigating magnetic phenomena at the microscopic level has emerged as an indispensable research domain in the field of low-dimensional magnetic materials. Understanding quantum phenomena that mediate the magnetic interactions in dimensionally confined materials is crucial from the perspective of designing cheaper, compact, and energy-efficient next-generation spintronic devices. The infrequent occurrence of intrinsic long-range magnetic order in dimensionally confined materials hinders the advancement of this domain. Hence, introducing and controlling the ferromagnetic character in two-dimensional materials is important for further prospective studies. The interface in a heterostructure significantly contributes to modulating its collective magnetic properties. Quantum phenomena occurring at the interface of engineered heterostructures can enhance or suppress magnetization of the system and introduce magnetic character to a native non-magnetic system. Considering most 2D magnetic materials are used as stacks with other materials in nanoscale devices, the methods to control the magnetism in a heterostructure and understanding the corresponding mechanism are crucial for promising spintronic and other functional applications. This review highlights the effect of electric polarization of the adjacent layer, changed structural configuration at the vicinity of the interface, natural strain induced by lattice mismatch, and exchange interaction in the interfacial region in modulating the magnetism of heterostructures of van der Waals and non-van der Waals materials. Further, prospects of interface-engineered magnetism in spin-dependent device applications are also discussed.

Nontrivial band topology coupled thermoelectrics in VSe2/MoSe2van der Waals magnetic Weyl semimetal

The correlation between topological and thermoelectrics promotes numerous interesting electronic phenomena and sets the stage for efficient thermopower devices. Herein, we report nontrivial band topology of 1T-VSe₂/1H-MoSe₂van der Waals system and also probe its thermoelectric (TE) characteristics on the basis of first-principle calculations. The crossover of bands, which creates a close loop near Fermi level along M-K high symmetry points, gets inverted at former crossing points of bands, under spin-orbit coupling effect. The calculated Chern NumberC= 1 supports the nontrivial band topology whereas the broken time reversal symmetry asserts its magnetic Weyl semimetallic behavior. The nontrivial band topology falls under the category of Type-I Weyl band crossing. We delve into the TE characteristics of the proposed topological material by employing constant relaxation time approximation. The heterostructure shows high electrical conductivity of order 10⁶S m^-1at both 300 K and 1200 K, and a low magnitude of Seebeck coefficient (S) value of 79.3μV K^-1near room temperature. Such interplay between the topological phase and TE characteristics can lay foundation for next-generation topological-TE devices.

Polyarylether-Based 2D Covalent-Organic Frameworks with In-Plane D-A Structures and Tunable Energy Levels for Energy Storage

The robust fully conjugated covalent organic frameworks (COFs) are emerging as a novel type of semi-conductive COFs for optoelectronic and energy devices due to their controllable architectures and easily tunable the highest occupied molecular orbital (HOMO) and the lowest occupied molecular orbital (LUMO) levels. However, the carrier mobility of such materials is still beyond requirements due to limited π-conjugation. In this study, a series of new polyarylether-based COFs are rationally synthesized via a direct reaction between hexadecafluorophthalocyanine (electron acceptor) and octahydroxyphthalocyanine (electron donor). These COFs have typical crystalline layered structures, narrow band gaps as low as ≈0.65 eV and ultra-low resistance (1.31 × 10^-6 S cm^-1 ). Such COFs can be composed of two different metal-sites and contribute improved carrier mobility via layer-altered staking mode according to density functional theory calculation. Due to the narrow pore size of 1.4 nm and promising conductivity, such COFs and electrochemically exfoliated graphene based free-standing films are fabricated for in-plane micro-supercapacitors, which demonstrate excellent volumetric capacitances (28.1 F cm^-3 ) and excellent stability of 10 000 charge-discharge cycling in acidic electrolyte. This study provides a new approach toward dioxin-linked COFs with donor-acceptor structure and easily tunable energy levels for versatile energy storage and optoelectronic devices.

Enabling methanol oxidation by interacting hybrid nano system of spinel Co3O4 nanoparticles decorated MXene

For the successful implementation of direct methanol fuel cells in the commercial applications, highly efficient and durable non-noble electrocatalyst based on conducting and stable non-carbonaceous support can be a potential...

Smart Adsorbents for Aquatic Environmental Remediation

A noticeable interest and steady rise in research studies reporting the design and assessment of smart adsorbents for sequestering aqueous metal ions and xenobiotics has occurred in the last decade. This motivates compiling and reviewing the characteristics, potentials, and performances of this new adsorbent generation's metal ion and xenobiotics sequestration. Herein, stimuli-responsive adsorbents that respond to its media (as internal triggers; e.g., pH and temperature) or external triggers (e.g., magnetic field and light) are highlighted. Readers are then introduced to selective adsorbents that selectively capture materials of interest. This is followed by a discussion of self-healing and self-cleaning adsorbents. Finally, the review ends with research gaps in material designs.

A review: recent advances in preparations and applications of heteroatom-doped carbon quantum dots

Carbon quantum dots (CQDs) are widely used in optoelectronic catalysis, biological imaging, and ion probes owing to their low toxicity, stable photoluminescence, and ease of chemical modification. However, the low fluorescence yield and monochromatic fluorescence of CQDs limit their practical applications. This review summarizes the commonly used approaches for improving the fluorescence efficiency of CQDs doped with non-metallic (heteroatom) elements. Herein, three types of heteroatom-doped CQDs have been investigated: (1) CQDs doped with a single heteroatom; (2) CQDs doped with two heteroatoms; and (3) CQDs doped with three heteroatoms. The limitations and future perspectives of doped CQDs from the viewpoint of producing CQDs for specific applications, especially for bioimaging and light emitting diodes, have also been discussed herein.

Facile Synthesis of Mesoporous α-Fe2O3@g-C3N4-NCs for Efficient Bifunctional Electro-catalytic Activity (OER/ORR)

Mesoporous α-iron oxide@graphitized-carbon nitride nanocomposites (α-Fe2O3@g-C3N4-NCs) were synthesized using urea-formaldehyde (UF) resins at 400 °C/2 h. The mesoporous nature of the prepared nanocomposites was observed from electron microscopy and surface area measurements. The electrochemical measurements show the bifunctional nature of mesoporous α-Fe2O3@g-C3N4-NCs in electrolysis of water for oxygen evolution and oxygen reduction reactions (OER/ORR) using 0.5 M KOH. Higher current density of mesoporous α-Fe2O3@g-C3N4-NCs reveals the enhanced electrochemical performance compared to pure Fe2O3 nanoparticles (NPs). The onset potential, over-potential and Tafel slopes of mesoporous α-Fe2O3@g-C3N4-NCs were found lower than that of pure α-Fe2O3-NPs. Rotating disc electrode experiments followed by the K-L equation were used to investigate 4e- redox system. Therefore, the mesoporous α-Fe2O3@g-C3N4-NCs bifunctional electro-catalysts can be considered as potential future low-cost alternatives for Pt/C catalysts, which are currently used in fuel cells.