Degradation of phthalate esters in floor dust at elevated relative humidity

Underlying Degradation of Phthalates via Microbials in Dust from Different Microenvironments

Phthalate monoesters (me-PAEs) have been used as biomarkers for assessing human exposure to phthalate esters (PAEs) for a long time, and studies on the sources and distribution of me-PAEs in the environment are limited. In this study, dust samples from microenvironments were collected to measure the occurrence of PAEs and me-PAEs, as well as the bacterial diversity. The results indicated that me-PAEs coexisted with PAEs in different microenvironmental dust samples, with concentrations of nine PAEs and 16 me-PAEs ranging from 108 to 1450 μg/g (median range) and 6.00 to 21.6 μg/g, respectively. The concentrations of several low molecular weight me-PAEs (e.g., monomethyl phthalate and monoethyl phthalate) in dust were even significantly higher than those of their parents. The bacteria in the dust were mainly predominant with Proteobacteria, Actinobacteria, Bacteroidetes, and Firmicutes (total abundance >90%). Bacteria from bus and air conditioning dust samples had the highest species richness and species diversity. Seven genes of suspected enzymes with the ability to degrade PAEs were selected, and the concentration of me-PAEs increased with increasing abundance of enzyme function. Our findings will provide useful information on the profiles of me-PAEs and their potential sources in indoor dusts, which will benefit the accurate estimation of human exposure.

Numerical Simulations of Synthetic Ester Hydrolysis in the Indoor Environment

The hydrolysis of synthetic esters (SEs), including phthalates and adipates, in damp indoor environments can lead to the release of volatile organic compounds implicated in poor air quality and acute health impacts, known as "sick building syndrome" (SBS). We have adapted the multiphase atmospheric chemistry box model, GAMMA, to simulate SE hydrolysis occurring in surface films in the indoor environment, along with multilayer boundary layer mass transfer and ventilation, in order to investigate this phenomenon on a process level. We then applied the model to analyze three scenarios in which hydrolysis has been hypothesized to have a significant impact on indoor air quality. Simulation results suggest that (1) alkaline hydrolysis of bis(2-ethylhexyl) adipate (DEHA) and bis(2-ethylhexyl) phthalate (DEHP) from PVC flooring on damp surfaces alone is not sufficient to explain the levels of 2-ethylhexanol reported in indoor air during episodes of SBS; (2) acute exposure to 2,2,4-trimethyl-1,3-pentanediol (TMPD) may be of concern during and shortly after the application of latex paint on an alkaline surface; and (3) alkaline hydrolysis of SEs following their airborne uptake in aqueous films is not expected to generate considerable amounts of alcohols associated with SBS.

Endocrine disrupting chemicals in indoor dust: A review of temporal and spatial trends, and human exposure

Several chemicals with widespread consumer uses have been identified as endocrine-disrupting chemicals (EDCs), with a potential risk to humans. The occurrence in indoor dust and resulting human exposure have been reviewed for six groups of known and suspected EDCs, including phthalates and non-phthalate plasticizers, flame retardants, bisphenols, per- and polyfluoroalkyl substances (PFAS), biocides and personal care product additives (PCPs). Some banned or restricted EDCs, such as polybrominated diphenyl ethers (PBDEs), di-(2-ethylhexyl) phthalate (DEHP), bisphenol A (BPA), perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA), are still widely detected in indoor dust in most countries, even as the predominating compounds of their group, but generally with decreasing trends. Meanwhile, alternatives that are also potential EDCs, such as bisphenol S (BPS), bisphenol F (BPF), decabromodiphenyl ethane (DBDPE) and organophosphate flame retardants (OPFRs), and PFAS precursors, such as fluorotelomer alcohols, have been detected in indoor dust with increasing frequencies and concentrations. Associations between some known and suspected EDCs, such as phthalate and non-phthalate plasticizers, FRs and BPs, in indoor dust and paired human samples indicate indoor dust as an important human exposure pathway. Although the estimated daily intake (EDI) of most of the investigated compounds was mostly below reference values, the co-exposure to a multitude of known or suspected EDCs requires a better understanding of mixture effects.

Phthalates in Glass Window Films of Chinese University Dormitories and Their Associations with Indoor Decorating Materials and Personal Care Products

Phthalates are widely used as plasticizers in the production of various consumer products used daily. We analyzed phthalate concentrations in window film samples from 144 dormitories in 13 universities and combined them with the results of questionnaires to explore the associations of phthalate concentrations with indoor decorating materials and personal care products. The phthalate pollution levels discovered in this study were much higher than those in previous studies of baby rooms and university buildings. Moreover, it was found that phthalate concentrations in glass window films were associated with laminated wood or polyvinyl chloride (PVC) flooring, iron furniture, medium density fiberboard (MDF) furniture, and the usage frequency of bottled skincare products. Laminated wood or PVC flooring, wallpaper, and iron furniture are very likely sources of specific phthalates, and the large surface areas of MDF furniture can act as sinks of phthalates. Transport of phthalates from the packaging of bottled skincare products into cosmetics should be given more attention. Our results provide a deep understanding of the sources of phthalates in glass window films.

Impact of mold growth on di(2-ethylhexyl) phthalate emission from moist wallpaper

Flood damage can increase indoor concentrations of di(2-ethylhexyl) phthalate (DEHP) and molds in households with wallpaper. Wallpaper water content can affect its DEHP emission into indoor environments; however, the influence of mold growth on this DEHP emission remains unclear. Here, we evaluated whether mold growth affects DEHP emission from moist wallpaper (moist WP). Experiments were conducted in glass chambers with wallpaper containing 12.7% (w/w) DEHP and a dust tray sample system at approximately 28 °C and 100% relative humidity (RH). The experimental groups were (1) moist WP, (2) moist WP + Aspergillus versicolor (AV), (3) moist WP + Cladosporium cladosporioides, (4) moist WP + Penicillium chrysogenum, and (5) moist WP + mold mixture. Mold growth on the wallpaper and DEHP emission into air and onto dust were analyzed at nine time-points over 30 days. Initially, the moist WP group emitted relatively high concentrations of DEHP into air, but after at least 8 days, the concentration of DEHP emitted by the mold-added groups exceeded that of the moist WP group. DEHP emission onto dust, especially from the moist WP group, increased considerably at day 15. During the experimental period, the moist WP (13.63 ± 4.67 μg) and moist WP + AV (13.93 ± 0.49 μg) groups emitted higher cumulative amounts of DEHP onto dust. During the 30-day experimental period, obvious mold growth occurred over days 15–30. Moreover, the moist WP group exhibited relatively higher and lower cumulative DEHP emission into air than the mold-added groups during days 2–10 (2.71 vs. 1.94–2.94 μg) and 15–30 (1.16 vs. 1.61–2.12), respectively; a contrasting trend was observed for cumulative DEHP emission onto dust. In conclusion, mold growth affects DEHP emission from water-damaged wallpaper, and the removal or cleaning of wet wallpaper, particularly those with visible mold growth, is critical from a public health perspective.

Cumulative human exposure and environmental occurrence of phthalate esters: A global perspective

In the current investigation, the distribution and extent of human exposure of phthalate esters (PAEs) have been reported on global extent based on computed indices. The proposed indices were calculated based on environmental concentrations, toxicity, occurrence, environmental fate, and transport of PAEs. The cumulative phthalate exposure index (PEI) based on the phthalate pollution index (PPI) was mapped on a global scale based on the existing data reported in the literature. The results revealed that the PAEs are heterogeneously distributed globally, and about 30% of total environmental PAEs are ultimately exposed to the average human being. The comparative distribution of PAEs in various environmental compartments including urban-rural, indoor-outdoor, home-dormitory-classroom, and their exposure likelihood were studied based on indices. More than 90% of total human exposure of PAEs was observed to be from indoor environmental compartments. Significantly high exposure was observed in the urban population as compared to the rural population. About 70% of the total phthalate pollution sub-index of dust was observed from home followed by a classroom of ∼15% and then a dormitory of ∼10%. In addition, the indices were equated with the current human development index (HDI), gross national income (GNI), and exposure of particulate matter of each country. Based on current findings, the population living in the areas where >20 μg/m³ of particulate matter has been reported are possibly exposed with higher PAEs. The indices were highly diversified at high HDI (0.9) values and between 40,000 and 50,000 $ per capita income due to different usage of phthalate-containing products, disposal, and extensive monitoring work carried out by the developed and developing countries.

A holistic modeling framework for estimating the influence of climate change on indoor air quality

The IPCC 2021 report predicts rising global temperatures and more frequent extreme weather events in the future, which will have different effects on the regional climate and concentrations of ambient air pollutants. Consequently, changes in heat and mass transfer between the inside and outside of buildings will also have an increasing impact on indoor air quality. It is therefore surprising that indoor spaces and occupant well-being still play a subordinate role in the studies of climate change. To increase awareness for this topic, the Indoor Air Quality Climate Change (IAQCC) model system was developed, which allows short and long-term predictions of the indoor climate with respect to outdoor conditions. The IAQCC is a holistic model that combines different scenarios in the form of submodels: building physics, indoor emissions, chemical-physical reaction and transformation, mold growth, and indoor exposure. IAQCC allows simulation of indoor gas and particle concentrations with outdoor influences, indoor materials and activity emissions, particle deposition and coagulation, gas reactions, and SVOC partitioning. These key processes are fundamentally linked to temperature and relative humidity. With the aid of the building physics model, the indoor temperature and humidity, and pollutant transport in building zones can be simulated. The exposure model refers to the calculated concentrations and provides evaluations of indoor thermal comfort and exposure to gaseous, particulate, and microbial pollutants.

Temperature and indoor environments

From the thermodynamic perspective, the term temperature is clearly defined for ideal physical systems: A unique temperature can be assigned to each black body via its radiation spectrum, and the temperature of an ideal gas is given by the velocity distribution of the molecules. While the indoor environment is not an ideal system, fundamental physical and chemical processes, such as diffusion, partitioning equilibria, and chemical reactions, are predictably temperature-dependent. For example, the logarithm of reaction rate and equilibria constants are proportional to the reciprocal of the absolute temperature. It is therefore possible to have non-linear, very steep changes in chemical phenomena over a relatively small temperature range. On the contrary, transport processes are more influenced by spatial temperature, momentum, and pressure gradients as well as by the density, porosity, and composition of indoor materials. Consequently, emergent phenomena, such as emission rates or dynamic air concentrations, can be the result of complex temperature-dependent relationships that require a more empirical approach. Indoor environmental conditions are further influenced by the thermal comfort needs of occupants. Not only do occupants have to create thermal conditions that serve to maintain their core body temperature, which is usually accomplished by wearing appropriate clothing, but also the surroundings must be adapted so that they feel comfortable. This includes the interaction of the living space with the ambient environment, which can vary greatly by region and season. Design of houses, apartments, commercial buildings, and schools is generally utility and comfort driven, requiring an appropriate energy balance, sometimes considering ventilation but rarely including the impact of temperature on indoor contaminant levels. In our article, we start with a review of fundamental thermodynamic variables and discuss their influence on typical indoor processes. Then, we describe the heat balance of people in their thermal environment. An extensive literature study is devoted to the thermal conditions in buildings, the temperature-dependent release of indoor pollutants from materials and their distribution in the various interior compartments as well as aspects of indoor chemistry. Finally, we assess the need to consider temperature holistically with regard to the changes to be expected as a result of global emergencies such as climate change.

ATR-FTIR and LC-Q-ToF-MS analysis of indoor dust from different micro-environments located in a tropical metropolitan area

Indoor dust is an important matrix that exposes humans to a broad spectrum of chemicals. The information on the occurrence of contaminants of emerging concern (CECs), their metabolites, and re-emerging contaminants in indoor dust is rather limited. As the indoor environment is exposed to various chemicals from personal care products, furniture, building materials, machineries and cooking/cleaning products, there is a high chance of the presence of hazardous contaminants in indoor dust. In the present study, dust samples were collected from four different micro indoor environments (photocopying centres, residential houses, classrooms, and ATM cabins) located in an urban environment located in India's southwestern part. The collected samples were subjected to ATR - FTIR and LC-Q-ToF-MS analyses. The ATR - FTIR analysis indicated the presence of aldehydes, anhydrides, carboxylic acids, esters, sulphonic acids, and asbestos - a re-emerging contaminant. A total of 19 compounds were identified from the LC-Q-ToF-MS analysis. These compounds belonged to various classes such as plasticisers, plasticiser metabolites, photoinitiators, personal care products, pharmaceutical intermediates, surfactants, and pesticides. To the best of our knowledge, this is the first report regarding the presence of CECs in indoor environments in Kerala and also the suspected occurrence of pesticides (metaldehyde and ethofumesate) in classroom dust in India. Another important highlight of this work is the demonstration of ATR-FTIR as a complementary technique for LC-Q-ToF-MS in the analysis of indoor pollution while dealing with totally unknown pollutants. These results further highlight the occurrence of probable chemically modified metabolites in the tropical climatic conditions in a microenvironment.

Prevalence of phthalate alternatives and monoesters alongside traditional phthalates in indoor dust from a typical e-waste recycling area: Source elucidation and co-exposure risk

This study first discovered the prevalence of phthalate (PAE) alternatives and PAE monoesters alongside traditional PAEs with elevated concentrations in indoor dust from typical e-waste recycling industrial park and adjacent communities. Among nine PAEs, high-molecular-weight (HMW) PAEs dominated over low-molecular-weight (LMW) PAEs in e-waste dust, with total concentrations (∑₉PAEs) ranging from 170 to 5300 μg g^-1. The diisononyl phthalate (DiNP) was identified as the most abundant PAE in e-waste dust, with over 10 times higher median concentration than that measured in home dust. Total concentrations of three PAE alternatives ranged from 20 to 1600 μg g^-1 in e-waste dust, which were 3-10 times higher than the measured levels in home dust. A total of 13 monoesters were all identified in all samples with total concentrations of 4.7-59 μg g^-1, and biodegradation of diesters was recognized as the major source of monoesters present in indoor dust. Significant correlations between the concentrations of PAE alternatives and the HMW PAEs were observed (p < 0.05), indicating that they are being simultaneously used in electronic and electrical products. The occupationally high co-exposure of e-waste dismantling workers to multiple PAEs and PAE alternatives as well as their monoesters should be of concern.

Anthropogenic chemicals and their impacts on microbes living in buildings

Humans spend the vast majority of their time indoors where complex interactions occur among indoor anthropogenic chemicals, indoor microbiomes and human occupants. This paper summarizes previous work addressing interactions between anthropogenic chemicals associated with indoor household products and building materials, and microorganisms found within the built environment. Water availability seems to determine the extent to which microbes are impacted by anthropogenic chemicals, since desiccation remains one of the primary stressors regulating microbial viability indoors. Several lines of evidence suggest that both fungi and bacteria are capable of transforming biodegradable ingredients originating from various products used indoors when water is present. Previous research also establishes positive and significant correlations between anthropogenic chemicals that are antimicrobial and antibiotic resistance gene abundance. As researchers move towards understanding complex indoor environments as well as the role of anthropogenic chemicals in shaping microbiomes, in situ activities associated with the viable indoor microbial population merit more attention.

Toxicity remission of PAEs on multireceptors after molecular modification through a 3D-QSAR pharmacophore model coupled with a gray interconnect degree method

In the proposed model, the gray interconnect degree method was employed to process the acute toxicity values of phthalate acid esters (PAEs) to green algae, daphnia, mysid, and fish (predicted by EPI Suite software) and to obtain the comprehensive characterization value of the multireceptor toxicity effect (MTE) of PAEs. The 3D-QSAR pharmacophore model indicated that hydrophobic groups significantly affected the MTE of PAEs. Based on this, 16 PAEs derivative molecules with significantly decreased comprehensive characterization value (more than 10%) of the toxic effects of multireceptors were designed. Among them, 13 PAEs derivative molecules reduced the toxicity values (predicted by the EPI Suite software) of four receptor organisms to varying degrees. Finally, two derivative molecules from PAEs were screened and could exist stably in the environment. The derivative molecule's reduced toxicity to the receptor was obtained through molecular docking methods and simulated the PAEs' primary metabolic response pathways. The above research results break through the pharmacophore model's limitation of only being suitable for the single effect of pollutants. Its application provides a new theoretical verification basis for expanding the multieffect pharmacophore model.

Assessing Human Exposure to SVOCs in Materials, Products, and Articles: A Modular Mechanistic Framework

A critical review of the current state of knowledge of chemical emissions from indoor sources, partitioning among indoor compartments, and the ensuing indoor exposure leads to a proposal for a modular mechanistic framework for predicting human exposure to semivolatile organic compounds (SVOCs). Mechanistically consistent source emission categories include solid, soft, frequent contact, applied, sprayed, and high temperature sources. Environmental compartments are the gas phase, airborne particles, settled dust, indoor surfaces, and clothing. Identified research needs are the development of dynamic emission models for several of the source emission categories and of estimation strategies for critical model parameters. The modular structure of the framework facilitates subsequent inclusion of new knowledge, other chemical classes of indoor pollutants, and additional mechanistic processes relevant to human exposure indoors. The framework may serve as the foundation for developing an open-source community model to better support collaborative research and improve access for application by stakeholders. Combining exposure estimates derived using this framework with toxicity data for different end points and toxicokinetic mechanisms will accelerate chemical risk prioritization, advance effective chemical management decisions, and protect public health.

Induction of esterase activity during the degradation of high concentrations of the contaminant di(2-ethylhexyl) phthalate by Fusarium culmorum under liquid fermentation conditions

In this study, the induction of esterase activity during the degradation of a high concentration of di(2-ethylhexyl) phthalate (DEHP) (1500 mg l^-1) by Fusarium culmorum was investigated using Ca(NO₃)₂ as nitrogen source under liquid fermentation conditions. Assessments of esterase activities through biochemical tests and zymographic assays, as well as fungal growth were studied. A high concentration of DEHP increased esterase activity in F. culmorum, which produces five esterase isoforms (26.4, 31.7, 43, 73.6 and 125 kDa), which were different in abundance and molecular weight to those produced constitutively in glucose-containing medium (control medium). F. culmorum showed higher µ and Y _X/S values in DEHP-containing medium than those observed in the control medium. F. culmorum has great potential for use in the restoration of sites contaminated with high concentrations of DEHP and even of other phthalates with less complex structures.

Modeling microbial growth in carpet dust exposed to diurnal variations in relative humidity using the "Time-of-Wetness" framework

Resuspension of microbes in floor dust and subsequent inhalation by human occupants is an important source of human microbial exposure. Microbes in carpet dust grow at elevated levels of relative humidity, but rates of this growth are not well established, especially under changing conditions. The goal of this study was to model fungal growth in carpet dust based on indoor diurnal variations in relative humidity utilizing the time-of-wetness framework. A chamber study was conducted on carpet and dust collected from 19 homes in Ohio, USA and exposed to varying moisture conditions of 50%, 85%, and 100% relative humidity. Fungal growth followed the two activation regime model, while bacterial growth could not be evaluated using the framework. Collection site was a stronger driver of species composition (P = 0.001, R2  = 0.461) than moisture conditions (P = 0.001, R2  = 0.021). Maximum moisture condition was associated with species composition within some individual sites (P = 0.001-0.02, R2  = 0.1-0.33). Aspergillus, Penicillium, and Wallemia were common fungal genera found among samples at elevated moisture conditions. These findings can inform future studies of associations between dampness/mold in homes and health outcomes and allow for prediction of microbial growth in the indoor environment.

Structural Characterization of an S-enantioselective Imine Reductase from Mycobacterium Smegmatis

NADPH-dependent imine reductases (IREDs) are enzymes capable of enantioselectively reducing imines to chiral secondary amines, which represent important building blocks in the chemical and pharmaceutical industry. Since their discovery in 2011, many previously unknown IREDs have been identified, biochemically and structurally characterized and categorized into families. However, the catalytic mechanism and guiding principles for substrate specificity and stereoselectivity remain disputed. Herein, we describe the crystal structure of S-IRED-Ms from Mycobacterium smegmatis together with its cofactor NADPH. S-IRED-Ms belongs to the S-enantioselective superfamily 3 (SFam3) and is the first IRED from SFam3 to be structurally described. The data presented provide further evidence for the overall high degree of structural conservation between different IREDs of various superfamilies. We discuss the role of Asp170 in catalysis and the importance of hydrophobic amino acids in the active site for stereospecificity. Moreover, a separate entrance to the active site, potentially functioning according to a gatekeeping mechanism regulating access and, therefore, substrate specificity is described.

Indoor acids and bases

Numerous acids and bases influence indoor air quality. The most abundant of these species are CO₂ (acidic) and NH₃ (basic), both emitted by building occupants. Other prominent inorganic acids are HNO₃ , HONO, SO₂ , H₂ SO₄ , HCl, and HOCl. Prominent organic acids include formic, acetic, and lactic; nicotine is a noteworthy organic base. Sources of N-, S-, and Cl-containing acids can include ventilation from outdoors, indoor combustion, consumer product use, and chemical reactions. Organic acids are commonly more abundant indoors than outdoors, with indoor sources including occupants, wood, and cooking. Beyond NH₃ and nicotine, other noteworthy bases include inorganic and organic amines. Acids and bases partition indoors among the gas-phase, airborne particles, bulk water, and surfaces; relevant thermodynamic parameters governing the partitioning are the acid-dissociation constant (K_a ), Henry's law constant (K_H ), and the octanol-air partition coefficient (K_oa ). Condensed-phase water strongly influences the fate of indoor acids and bases and is also a medium for chemical interactions. Indoor surfaces can be large reservoirs of acids and bases. This extensive review of the state of knowledge establishes a foundation for future inquiry to better understand how acids and bases influence the suitability of indoor environments for occupants, cultural artifacts, and sensitive equipment.

Morphology and quantification of fungal growth in residential dust and carpets

Mold growth indoors is associated with negative human health effects, and this growth is limited by moisture availability. Dust deposited in carpet is an important source of human exposure due to potential elevated resuspension compared to hard floors. However, we need an improved understanding of fungal growth in dust and carpet to better estimate human exposure. The goal of this study was to compare fungal growth quantity and morphology in residential carpet under different environmental conditions, including equilibrium relative humidity (ERH) (50%, 85%, 90%, 95%, 100%), carpet fiber material (nylon, olefin, wool) and presence/absence of dust. We analyzed incubated carpet and dust samples from three Ohio homes for total fungal DNA, fungal allergen Alt a 1, and fungal morphology. Dust presence and elevated ERH (≥85%) were the most important variables that increased fungal growth. Elevated ERH increased mean fungal DNA concentration (P < 0.0001), for instance by approximately 1000 times at 100% compared to 50% ERH after two weeks. Microscopy also revealed more fungal growth at higher ERH. Fungal concentrations were up to 100 times higher in samples containing house dust compared to no dust. For fiber type, olefin had the least total fungal growth, and nylon had the most total fungi and A. alternata growth in unaltered dust. Increased ERH conditions were associated with increased Alt a 1 allergen concentration. The results of this study demonstrate that ERH, presence/absence of house dust, and carpet fiber type influence fungal growth and allergen production in residential carpet, which has implications for human exposure.

Ten questions concerning the implications of carpet on indoor chemistry and microbiology

Carpet and rugs currently represent about half of the United States flooring market and offer many benefits as a flooring type. How carpets influence our exposure to both microorganisms and chemicals in indoor environments has important health implications but is not well understood. The goal of this manuscript is to consolidate what is known about how carpet impacts indoor chemistry and microbiology, as well as to identify the important research gaps that remain. After describing the current use of carpet indoors, questions focus on five specific areas: 1) indoor chemistry, 2) indoor microbiology, 3) resuspension and exposure, 4) current practices and future needs, and 5) sustainability. Overall, it is clear that carpet can influence our exposures to particles and volatile compounds in the indoor environment by acting as a direct source, as a reservoir of environmental contaminants, and as a surface supporting chemical and biological transformations. However, the health implications of these processes are not well known, nor how cleaning practices could be optimized to minimize potential negative impacts. Current standards and recommendations focus largely on carpets as a primary source of chemicals and on limiting moisture that would support microbial growth. Future research should consider enhancing knowledge related to the impact of carpet in the indoor environment and how we might improve the design and maintenance of this common material to reduce our exposure to harmful contaminants while retaining the benefits to consumers.

Early life home microbiome and hyperactivity/inattention in school-age children

This study evaluates the association between indoor microbial diversity early in life and hyperactivity/inattention symptoms in children at ages 10 and 15 years.A random sample enriched with subjects with hyperactivity/inattention at age 15 years was selected from the German LISA birth cohort. Bedroom floor dust was collected at age 3 months and 4 bacterial and fungal diversity measures [number of observed operational taxonomic units (OTUs), Chao1, Shannon and Simpson indices] were calculated from Illumina MiSeq sequencing data. Hyperactivity/inattention was based on the Strengths and Difficulties Questionnaire at ages 10 and 15 (cut-off ≥7). Adjusted associations between 4 diversity measures in tertiles and hyperactivity/inattention were investigated with weighted and survey logistic regression models. We included 226 individuals with information on microbial diversity and hyperactivity/inattention. Early life bacterial diversity was inversely associated with hyperactivity/inattention at age 10 [bacterial OTUs (medium vs low: aOR = 0.4, 95%CI = (0.2–0.8)) and Chao1 (medium vs low: 0.3 (0.1–0.5); high vs low: 0.3 (0.2–0.6)], whereas fungal diversity was directly associated [Chao1 (high vs low: 2.1 (1.1–4.0)), Shannon (medium vs low: 2.8 (1.3–5.8)), and Simpson (medium vs low: 4.7 (2.4–9.3))]. At age 15, only Shannon index was significantly associated with hyperactivity/inattention [bacteria (medium vs low: 2.3 (1.2–4.2); fungi (high vs low: 0.5 (0.3–0.9))]. In conclusion, early life exposure to microbial diversity may play a role in the psychobehavioural development. We observe heterogeneity in the direction of the associations encouraging further longitudinal studies to deepen our understanding of the characteristics of the microbial community underlying the observed associations.

Accumulation of di-2-ethylhexyl phthalate from polyvinyl chloride flooring into settled house dust and the effect on the bacterial community

Di-2-ethylhexyl phthalate (DEHP) is a plasticizer used in consumer products and building materials, including polyvinyl chloride flooring material. DEHP adsorbs from material and leaches into soil, water, or dust and presents an exposure risk to building occupants by inhalation, ingestion, or absorption. A number of bacterial isolates are demonstrated to degrade DEHP in culture, but bacteria may be susceptible to it as well, thus this study examined the relation of DEHP to bacterial communities in dust. Polyvinyl chloride flooring was seeded with homogenized house dust and incubated for up to 14 days, and bacterial communities in dust were identified at days 1, 7, and 14 using the V3–V4 regions of the bacterial 16S rRNA gene. DEHP concentration in dust increased over time, as expected, and bacterial richness and Shannon diversity were negatively correlated with DEHP concentration. Some sequence variants of Bacillus, Corynebacterium jeddahense, Streptococcus, and Peptoniphilus were relatively more abundant at low concentrations of DEHP, while some Sphingomonas, Chryseobacterium, and a member of the Enterobacteriaceae family were relatively more abundant at higher concentrations. The built environment is known to host lower microbial diversity and biomass than natural environments, and DEHP or other chemicals indoors may contribute to this paucity.

From one species to another: A review on the interaction between chemistry and microbiology in relation to cleaning in the built environment

Since the advent of soap, personal hygiene practices have revolved around removal, sterilization, and disinfection-both of visible soil and microscopic organisms-for a myriad of cultural, aesthetic, or health-related reasons. Cleaning methods and products vary widely in their recommended use, effectiveness, risk to users or building occupants, environmental sustainability, and ecological impact. Advancements in science and technology have facilitated in-depth analyses of the indoor microbiome, and studies in this field suggest that the traditional "scorched-earth cleaning" mentality-that surfaces must be completely sterilized and prevent microbial establishment-may contribute to long-term human health consequences. Moreover, the materials, products, activities, and microbial communities indoors all contribute to, or remove, chemical species to the indoor environment. This review examines the effects of cleaning with respect to the interaction of chemistry, indoor microbiology, and human health.

Beyond Phthalate Diesters: Existence of Phthalate Monoesters in South China House Dust and Implications for Human Exposure

Despite phthalate monoesters (mono-PAEs) being commonly recognized as metabolic products of phthalate diesters (di-PAEs), investigations on their environmental occurrences, particularly in indoor environments, remain limited. The present study demonstrated the presence mono-PAEs, along with a variety of di-PAEs, in house dust collected from 83 South China families. Among 15 target mono-PAEs, monobutyl phthalate (median concentration, 21.54 μg/g) dominated over other mono-PAEs in indoor dust, followed by monoethylhexyl phthalate (9.44 μg/g), monoisobutyl phthalate (5.14 μg/g), monomethyl phthalate (MMP; 2.05 μg/g), and several others. The total concentrations of detectable mono-PAEs (median, 45.40 μg/g) constituted an average of 6.7 ± 3.7% of the total concentrations of their parent diesters in the same dust. Molar concentration ratios of mono-PAEs to their respective di-PAEs varied greatly among chemicals (median, 0.001-3.1), with the highest ratios determined for the MMP/dimethyl phthalate and mono-/diisopropyl phthalate pairs (i.e., 3.1 and 1.5, respectively). In addition, no significant associations were observed between dust-associated mono- or di-PAEs and urinary mono-PAEs detected in both children (n = 48) and adult participants (n = 41). We hypothesized that mono-PAEs in dust could originate from different sources (e.g., impurities in di-PAE formulas, degradation from di-PAEs, and direct application as commercial additives), while the relative importance of various origins could differ between chemicals. Our findings demonstrate broad occurrences of mono-PAEs in indoor environments, but future studies are needed to better elucidate their sources, fate in indoor and outdoor environments, and potential human health risks.