Hierarchically patterned striped phases of polymerized lipids: toward controlled carbohydrate presentation at interfaces

Inkjet Printing of Nanoscale Functional Patterns on 2D Crystalline Materials and Transfer to Soft Materials

Nanometer-scale control over surface functionality is important in applications ranging from nanoscale electronics to regenerative medicine. However, approaches that provide precise control over surface chemistry at the nanometer scale are often challenging to use with higher throughput and in more heterogeneous environments (e.g., complex solutions, porous interfaces) common for many applications. Here, we demonstrate a scalable inkjet-based method to generate 1 nm-wide functional patterns on 2D materials such as graphite, which can then be transferred to soft materials such as hydrogels. We examine fluid dynamics associated with the inkjet printing process for low-viscosity amphiphile inks designed to maximize ordering with limited residue and show that microscale droplet fluid dynamics influence nanoscale molecular ordering. Additionally, we show that scalable patterns generated in this way can be transferred to hydrogel materials and used to create surface chemical patterns that induce adsorption of charged particles, with effects strong enough to overcome electrostatic repulsion between a charged hydrogel and a like-charged nanoparticle.

Phospholipid Epitaxial Assembly Behavior on a Hydrophobic Highly Ordered Pyrolytic Graphite Surface

Supported lipid bilayers (SLBs) are excellent models of cell membranes. However, most SLBs exist in the form of phospholipid molecules standing on a substrate, making it difficult to have a side view of the phospholipid membranes. In this study, the phospholipid striped lamella with the arrangement of their alkane tails lying on highly ordered pyrolytic graphite (HOPG) was constructed by a spin coating method. Atomic force microscopy and molecular dynamics simulations are utilized to study the self-assembly of phospholipids on HOPG. Results show that various phospholipids with different packing parameters and electrical property are able to epitaxially adsorb on HOPG. 0.1 mg/mL Plasm PC (0.1 mg/mL) could form a striped monolayer with a width of 5.93 ± 0.21 nm and form relatively stable four striped layers with the concentration increasing to 1 mg/mL. The width of the DOPS multilayer is more than that of electroneutral lipids due to the static electrical repulsion force. This universal strategy sheds light on direct observation of the membrane structure from the side view and modification of 2D materials with amphiphilic biomolecules.

Polymerization of Physisorbed Molecular Monolayers via Overhanging Alkynyl Chains: Characterization of Polymerization Kinetics and Monolayer Durability

Monolayers self-assembled by triphenyleneethynylene (TPE) compounds bearing two terminal alkynyl chains were polymerized by Glaser-Hay (G-H) alkyne coupling at the acetonitrile-HOPG interface. The alkynyl chains extend into the solution due to the monolayer's dense-packed morphology. Reacting substructures that have no morphology-determining roles is a potential strategy for preserving monolayer morphology throughout polymerization. Monolayer G-H reaction kinetics and polymerized monolayer durability were characterized by using mass spectrometry and fluorescence. Fourier transform ion cyclotron resonance (FTICR) mass spectrometry (MS) and time-of-flight (TOF) MS were used to identify TPE-oligomers in the monolayer and to track the monolayer populations of TPE-monomer, -dimer, and -trimer as a function of G-H reaction duration. Comparison of the observed kinetics to a Monte Carlo simulation provided evidence of step-growth polymerization. The durability of polymerized monolayers depended strongly on the length of the alkynyl chains linked by G-H reaction. Polymerized T6y monolayers (O(CH2)3C≡CH alkynyl chains) desorbed minimally during 16-h immersion in 90 °C o-dichlorobenzene (oDCB), whereas polymerized T8y (O(CH2)5C≡CH alkynyl chains) and polymerized T11y (O(CH2)8C≡CH alkynyl chains), desorbed 33 and 60%, respectively, of their TPE units after 4 h in 90 °C oDCB. All the polymerized monolayers are much more durable than unpolymerized monolayers, which desorb quantitatively from HOPG when rinsed with 25 μL of oDCB. Polymerized T6y monolayer is a highly durable anchor that may be adapted to build multilayer structures "permanently" attached to the HOPG surface. The alkynyl chain length dependence may be useful for tuning polymerized TPE monolayer durability for specific applications.

Surface-Templated Glycopolymer Nanopatterns Transferred to Hydrogels for Designed Multivalent Carbohydrate-Lectin Interactions across Length Scales

Multivalent interactions between carbohydrates and proteins enable a broad range of selective chemical processes of critical biological importance. Such interactions can extend from the macromolecular scale (1-10 nm) up to much larger scales across a cell or tissue, placing substantial demands on chemically patterned materials aiming to leverage similar interactions in vitro. Here, we show that diyne amphiphiles with carbohydrate headgroups can be assembled on highly oriented pyrolytic graphite (HOPG) to generate nanometer-resolution carbohydrate patterns, with individual linear carbohydrate assemblies up to nearly 1 μm, and microscale geometric patterns. These are then photopolymerized and covalently transferred to the surfaces of hydrogels. This strategy suspends carbohydrate patterns on a relatively rigid polydiacetylene (persistence length ∼ 16 nm), exposed at the top surface of the hydrogel above the bulk pore structure. Transferred patterns of appropriate carbohydrates (e.g., N-acetyl-d-glucosamine, GlcNAc) enable selective, multivalent interactions (K_D ∼ 40 nM) with wheat germ agglutinin (WGA), a model lectin that exhibits multivalent binding with appropriately spaced GlcNAc moieties. WGA binding affinity can be further improved (K_D ∼ 10 nM) using diacetylenes that shift the polymer backbone closer to the displayed carbohydrate, suggesting that this strategy can be used to modulate carbohydrate presentation at interfaces. Conversely, GlcNAc-patterned surfaces do not induce specific binding of concanavalin A, and surfaces patterned with glucuronic acid, or with simple carboxylic acid or hydroxyl groups, do not induce WGA binding. More broadly, this approach may have utility in designing synthetic glycan-mimetic interfaces with features from molecular to mesoscopic scales, including soft scaffolds for cells.

Nanostructured Surface Functionalization of Polyacrylamide Hydrogels Below the Length Scale of Hydrogel Heterogeneity

Hydrogels are broadly used in applications where polymer materials must interface with biology. The hydrogel network is amorphous, with substantial heterogeneity on length scales up to hundreds of nanometers, in some cases raising challenges for applications that would benefit from highly structured interactions with biomolecules. Here, we show that it is possible to generate ordered patterns of functional groups on polyacrylamide hydrogel surfaces. We demonstrate that, when linear patterns of amines are transferred to polyacrylamide, they pattern interactions with DNA at the interface, a capability of potential importance for preconcentration in chromatographic applications, as well as for the development of nanostructured hybrid materials and supports for cell culture.

Nanometer-Scale Precision Polymer Patterning of PDMS: Multiscale Insights into Patterning Efficiency Using Alkyldiynamines

Most high-resolution interfacial patterning approaches are restricted to crystalline inorganic interfaces. Recently, we have shown that it is possible to generate 1 nm resolution functional patterns on soft materials, such as polydimethylsiloxane (PDMS), by creating highly structured striped patterns of functional alkyldiacetylenes on a hard crystalline surface, photopolymerizing to set the molecular pattern as a striped-phase polydiacetylene (sPDA), and then covalently transferring the sPDAs to PDMS. Transfer depends on the diacetylene polymerization, making it important to understand design principles for efficient sPDA polymerization and cross-linking to PDMS. Here, we combine single-molecule and fluorescence-based metrics for sPDA polymerization and transfer, first to characterize sPDA polymerization of amine striped phases, and then to develop a probabilistic model that describes the transfer process in terms of sPDA-PDMS cross-linking reaction efficiency and number of reactions required for transfer. We illustrate that transferred patterns of alkylamines can be used to direct both adsorption of CdSe nanocrystals with alkyl ligand shells and covalent reactions with fluorescent dyes, highlighting the utility of functional patterning of the PDMS surface.

Nanometer-scale patterning of hard and soft interfaces: from photolithography to molecular-scale design

Many areas of modern materials chemistry, from nanoscale electronics to regenerative medicine, require design of precisely-controlled chemical environments at near-molecular scales on both hard and soft surfaces.

Plenty of Room at the Top: A Multi-Scale Understanding of nm-Resolution Polymer Patterning on 2D Materials

Lamellar phases of alkyldiacetylenes in which the alkyl chains lie parallel to the substrate represent a straightforward means for scalable 1-nm-resolution interfacial patterning. This capability has the potential for substantial impacts in nanoscale electronics, energy conversion, and biomaterials design. Polymerization is required to set the 1-nm functional patterns embedded in the monolayer, making it important to understand structure-function relationships for these on-surface reactions. Polymerization can be observed for certain monomers at the single-polymer scale using scanning probe microscopy. However, substantial restrictions on the systems that can be effectively characterized have limited utility. Here, using a new multi-scale approach, we identify a large, previously unreported difference in polymerization efficiency between the two most widely used commercial diynoic acids. We further identify a core design principle for maximizing polymerization efficiency in these on-surface reactions, generating a new monomer that also exhibits enhanced polymerization efficiency.

Lipids: An Atomic Toolkit for the Endless Frontier

The evolution of lipids in nanoscience exemplifies the powerful coupling of advances in science and technology. Here, we describe two waves of discovery and innovation in lipid materials: one historical and one still building. The first wave leveraged the relatively simple capability for lipids to orient at interfaces, building layers of functional groups. This simple form of building with atoms yielded a stunning range of technologies: lubricant additives that dramatically extended machine lifetimes, molecules that enabled selective ore extraction in mining, and soaps that improved human health. It also set the stage for many areas of modern nanoscience. The second wave of lipid materials, still growing, uses the more complex toolkits lipids offer for building with atoms, including controlling atomic environment to control function (e.g., pK_a tuning) and the generation of more arbitrary two-dimensional and three-dimensional structures, including lipid nanoparticles for COVID-19 mRNA vaccines.

One Nanometer Wide Functional Patterns with a Sub-10 Nanometer Pitch Transferred to an Amorphous Elastomeric Material

Decades of work in surface science have established the ability to functionalize clean inorganic surfaces with sub-nm precision, but for many applications, it would be useful to provide similar control over the surface chemistry of amorphous materials such as elastomers. Here, we show that striped monolayers of diyne amphiphiles, assembled on graphite and photopolymerized, can be covalently transferred to polydimethylsiloxane (PDMS), an elastomer common in applications including microfluidics, soft robotics, wearable electronics, and cell culture. This process creates precision polymer films <1 nm thick, with 1 nm wide functional patterns, which control interfacial wetting and reactivity, and template adsorption of flexible, ultranarrow Au nanowires. The polydiacetylenes exhibit polarized fluorescence emission, revealing polymer location, orientation, and environment, and resist engulfment, a common problem in PDMS functionalization. These findings illustrate a route for patterning surface chemistry below the length scale of heterogeneity in an amorphous material.

Large-Scale Noncovalent Functionalization of 2D Materials through Thermally Controlled Rotary Langmuir-Schaefer Conversion

As two-dimensional (2D) materials are more broadly utilized as components of hybrid materials, controlling their surface chemistry over large areas through noncovalent functionalization becomes increasingly important. Here, we demonstrate a thermally controlled rotary transfer stage that allows areas of a 2D material to be continuously cycled into contact with a Langmuir film. This approach enables functionalization of large areas of the 2D material and simultaneously improves long-range ordering, achieving ordered domain areas up to nearly 10 000 μm². To highlight the layer-by-layer processing capability of the rotary transfer stage, large-area noncovalently adsorbed monolayer films from an initial rotary cycle were used as templates to assemble ultranarrow gold nanowires from solution. The process we demonstrate would be readily extensible to roll-to-roll processing, addressing a longstanding challenge in scaling Langmuir-Schaefer transfer for practical applications.