Yolk-shell porous Fe3O4@C anchored on graphene as anode for Li-ion half/full batteries with high rate capability and long cycle life

Iron oxides have been widely studied as anode materials for lithium-ion batteries (LIBs) due to their high conductivity (5 × 10⁴ S m^-1) and high capacity (ca. 926 mAh g^-1). However, having a large volume change and being highly prone to dissolution/aggregation during charge/discharge cycles hinder their practical application. Herein, we report a design strategy for constructing yolk-shell porous Fe₃O₄@C anchored on graphene nanosheets (Y-S-P-Fe₃O₄/GNs@C). This particular structure can not only introduce sufficient internal void space to accommodate the volume change of Fe₃O₄ but also afford a carbon shell to restrict Fe₃O₄ overexpansion, thus greatly improving capacity retention. In addition, the pores in Fe₃O₄ can effectively promote ion transport, and the carbon shell anchored on graphene nanosheets is capable of enhancing overall conductivity. Consequently, Y-S-P-Fe₃O₄/GNs@C features a high reversible capacity of 1143 mAh g^-1, an excellent rate capacity (358 mAh g^-1 at 10.0 A g^-1), and a prolonged cycle life with robust cycling stability (579 mAh g^-1 remaining after 1800 cycles at 2.0 A g^-1) when assembled into LIBs. The assembled Y-S-P-Fe₃O₄/GNs@C//LiFePO₄ full-cell delivers a high energy density of 341.0 Wh kg^-1 at 37.9 W kg^-1. The Y-S-P-Fe₃O₄/GNs@C is proved to be an efficient Fe₃O₄-based anode material for LIBs.

Fe2O3nanoparticles anchored on thermally oxidized MWCNTs as anode material for lithium-ion battery

Thermally oxidized MWCNTs (OMWCNTs) are fabricated by a thermal treatment of MWCNTs at 500 °C for 3 h in an oxygen-containing atmosphere. The oxygen content of OMWCNTs increases from 1.9 wt% for MWCNTs to 8.3 wt%. And the BET specific surface area of OMWCNTs enhances from 254.2 m²g^-1for MWCNTs to 496.1 m²g^-1. The Fe₂O₃/OMWCNTs nanocomposite is prepared by a hydrothermal method. Electrochemical measurements show that Fe₂O₃/OMWCNTs still keeps a highly reversible specific capacity of 653.6 mA h g^-1after 200 cycles at 0.5 A g^-1, which shows an obviously higher capacity than the sum of that of single Fe₂O₃and OMWCNTs. The OMWCNTs not only buffer the volume changes of Fe₂O₃nanoparticles but also provide high-speed electronic transmission channels in the charge-discharge process. The thermal oxidation method of OMWCNTs avoids using strong corrosive acids such as nitric acid and sulfuric acid, which has the advantages of safety, environmental protection, macroscopic preparation, etc.

Graphite-like structure of disordered polynaphthalene hard carbon anode derived from the carbonization of perylene-3,4,9,10-tetracarboxylic dianhydride for fast-charging lithium-ion batteries

The graphite-like PTCDA-1100 hard carbon is prepared, which exhibits mixed porous structure with wider layer spacing, larger specific surface area and more exposed active points. As a result, superior rate cycle behaviors for both PTCDA-1100/Li half-batteries and PTCDA-1100/NCM-811 full batteries are observed.