Thermal stability of levopimaric acid and its oxidation products

Biofuels are renewable alternatives to fossil fuels. Levopimaric acid‒base biofuels have attracted increasing attention. However, their stability remains a critical issue in practice. Thus, there is a strong impetus to evaluate the thermal stability of levopimaric acid. Through thermogravimetry (TG) and a custom-designed mini closed pressure vessel test (MCPVT) operating under isothermal and stepped temperature conditions, we investigated thermal oxidation characteristics of levopimaric acid under oxygen atmosphere. Thin-layer chromatography (TLC) and iodimetry were used to measure the hydrogen peroxides generated by levopimaric acid oxidation. A high pressure differential scanning calorimeter (HPDSC) was used to assess hydroperoxide thermal decomposition characteristics. Gas chromatography-mass spectrometry (GC-MS) was used to characterize the oxidation products. The thermal decomposition kinetics of levopimaric acid were thus elucidated, and a high peroxide value was detected in the levopimaric acid. The decomposition heat (QDSC) and exothermic onset temperature (Tonset) of hydroperoxides were 338.75 J g-1 and 375.37 K, respectively. Finally, levopimaric acid underwent a second-stage oxidation process at its melt point (423.15 K), resulting in complex oxidation products. Thermal oxidation of levopimaric acid could yield potential thermal hazards, indicating that antioxidants must be added during levopimaric acid application to protect against such hazardous effects.

Reactivity and kinetics of 1,3-butadiene under ultraviolet irradiation at 254 nm

The reaction process of gaseous 1,3-butadiene following ultraviolet irradiation at the temperature range from 298 to 323 K under nitrogen atmosphere was monitored by UV–vis spectrophotometry. A gaseous mini-reactor was used as a reaction vessel and could be directly monitored in a UV–vis spectrophotometer. We investigated the reactivity and kinetics of 1,3-butadiene under non-UV and UV irradiation to evaluate its photochemical stability. A second-order kinetic model with 50.48 kJ·mol^–1 activation energy fitted the reaction data for non-UV irradiation, whereas a first-order kinetic model was appropriate in the case of UV irradiation with activation energies of 19.92–43.65 kJ mol^–1. This indicates that ultraviolet light could accelerate the photolysis reaction rate of 1,3-butadiene. In addition, the reaction products were determined using gas chromatography-mass spectrometry (GC–MS), and the reaction pathways were identified. The photolysis of 1,3-butadiene gave rise to various volatile products by cleavage and rearrangement of single C–C bonds. The differences between dimerization and dissociation of 1,3-butadiene under ultraviolet irradiation were elucidated by combining experimental and theoretical methods. The present findings provide fundamental insight into the photochemistry of 1,3-butadiene compounds.

Thermal Stability Evaluation of Resin Acids and Rosin Modified Resins

Rosin is a sustainable resource, which is mainly composed of resin acid. Rosin-modified resin is widely used in adhesives, inks, coatings, and other fields, and its stability is very important for the production, storage, and use of products. Thermal stability and reactivity of three resin acids (levopimaric acid, neoabietic acid, and dehydroabietic acid) and four rosin-modified resins were studied using an accelerating rate calorimeter (ARC). They are stable, and exothermic reactions do not occur even when they were heated to 200 °C under a nitrogen atmosphere, but they are unstable under an oxygen atmosphere. The mechanism of the oxidation reaction process was found: first, resin acids absorb oxygen, and then an exothermic oxidation occurs. The initial exothermic temperature (T ₀) of levopimaric acid, neoabietic acid, and dehydroabietic acid are 354.01, 353.83, and 398.20 K, the initial oxidation kinetics shows a second-order reaction, and the activation energies (E _a) are 42.90, 58.05, and 46.60 kJ/mol, respectively. Peroxide concentration of three resin acids were determined by iodometry. The T ₀ values of hydrogenated rosin, disproportionated rosin, hydrogenated rosin glyceride, and hydrogenated rosin pentaerythritol ester, the four rosin-modified resin, are 353.71, 348.32, 412.85, and 412.44 K. Levopimaric acid and neoabietic acid have higher oxidative reactivity and easily undergoes an oxidation reaction at lower temperature. Rosin-modified resins are stable and find it difficult to undergo oxidation reactions.