A porous Au-Ag hybrid nanoparticle array with broadband absorption and high-density hotspots for stable SERS analysis

Ultrasensitive detection strategy for CAP by molecularity imprinted SERS sensor based on multiple synergistic enhancement of SiO2@AuAg with MOFs@Au signal carrier

Chloramphenicol (CAP) residue in food can cause great harm to human health, it is important to develop a rapid and sensitive method to detect CAP. Here, molecularly imprinted polymer (MIP) was combined with metal-organic frameworks@Au (MOFs@Au) collaborative construction surface-enhanced Raman spectroscopy (SERS) based aptasensor for CAP ultrasensitive detection. MOFs@Au first carried the Raman signal molecule toluidine blue (TB) and aptamer to form MOFs@Au@TB@Apt. In addition, rMIP (CAP was removed) was dropped onto the uniform three-dimensional (3D) SERS substrate SiO2@AuAg to form SiO2@AuAg@rMIP. In the presence of target CAP, it could be specifically captured with rMIP by covalent interaction and was recognised by the aptamer. During this time, SiO2@AuAg@rMIP@CAP could selectively connect MOFs@Au@TB@Apt to realise synergistic enhance the Raman signal. Based on this principle, the proposed SERS aptasensor exhibits excellent sensitivity with a detection limit of 7.59×10-13 M for CAP, providing a new strategy for trace detection in food.

Honeycomb-Inspired Surface-Enhanced Raman Scattering Microarray for Large-Area Automated Testing of Urease in Saliva Samples

Surface-enhanced Raman scattering (SERS) technology, as an important analytical tool, has been widely applied in the field of chemical and biomedical sensing. Automated testing is often combined with biochemical analysis technologies to shorten the detection time and minimize human error. The present SERS substrates for sample detection are time-consuming and subject to high human error, which are not conducive to the combination of SERS and automated testing. Here, a novel honeycomb-inspired SERS microarray is designed for large-area automated testing of urease in saliva samples to shorten the detection time and minimize human error. The honeycomb-inspired SERS microarray is decorated with hexagonal microwells and a homogeneous distribution of silver nanostars. Compared with the other four common SERS substrates, the optimal honeycomb-inspired SERS microarray exhibits the best SERS performance. The RSD of 100 SERS spectra continuously collected from saliva samples is 6.56%, and the time of one detection is reduced from 5 min to 10 s. There is a noteworthy linear relationship with a R2 of 0.982 between SERS intensity and urease concentration, indicating the quantitative detection capability of the urease activity in saliva samples. The honeycomb-inspired SERS microarray, combined with automated testing, provides a new way in which SERS technology can be widely used in biomedical applications.

Template-confined assembly of Ag nanocubes: An approach to fabricate SERS substrate with good performance

Surface-enhanced Raman scattering (SERS) is an important analytical technique. Its detection sensitivity and reproducibility depend on the density and distribution of SERS hotspots. Self-assembly is an efficient method to produce of SERS substrates due to its easy accessibility. However, the assembled defects can hardly be avoided on large area, which could lower the density and uniformity of the hotspots, leading to poor SERS performance. Herein, we report a method to reduce the defects by taking a patterned substrate as template to confine the assembly of Ag nanocubes. The template was prepared based on the combination of photo lithography and self-assembly. Confined by the template, the Ag nanocubes were assembled closely in each dots of the pattern. The limit of detection (LOD) is down to 3.42 × 10-17 M and the enhanced factor (EF) is up to 3.44 × 1010 on the prepared substrate for detecting rhodamine 6G (R6G). In addition, the relative standard deviation (RSD) of the different substrates is 8.75 %. The assembled Ag nanocubes exhibits high sensitivity and reproducibility as SERS substrate, which are contributed by the formation of high-density and uniform hotspots. The prepared substrate can be used for detecting trace amounts of melamine in milk with LOD of 2.06 × 10-7 M and RSD of 6.91 %, so the substrate is applicable for analyzing various analytes.

Surface Filtration in Mesoporous Au Films Decorated by Ag Nanoparticles for Solving SERS Sensing Small Molecules in Living Cells

For surface-enhanced Raman spectroscopy (SERS) sensing of small molecules in the presence of living cells, biofouling and blocking of plasmonic centers are key challenges. Here, we have developed a mesoporous Au (AuM) film coated with a Ag nanoparticles (NPs) as a plasmonic sensor (AuM@Ag) to analyze aromatic thiols, which is an example of a small molecule, in the presence of a living cell strain (e.g., MDA-MB-231) as a model living system. The resulting AuM@Ag provides 0.1 nM sensitivity and high reproducibility for thiols sensing. Simultaneously, the AuM@Ag film filters large biomolecules, preventing Raman signals from overlapping produced by large biomolecules. After analysis, the AuM@Ag film undergoes recycling by the full dissolution of the Ag-thiol layer and removal of thiols from AuM. Furthermore, fresh AgNPs are formed for further SERS analysis, which circumvents the Ag oxidation issue. The ease of the AgNPs deposition allows up to 12 cycles of on-demand recycling and sensing even after utilization as a sensor in multicomponent media without enhancement and sensitivity loss. The reported mesoporous film with surface filtering ability and prominent recycling procedure promises to offer a new strategy for the detection of various small molecules in the presence of living cells.

Facile Synthesis of Porous Ag Crystals as SERS Sensor for Detection of Five Methamphetamine Analogs

Porous noble metal nanomaterials have attracted extensive attention due to their high specific surface area and surface plasmon resonance effect. However, it is difficult to form porous structures due to the high mobility and low reduction potential of noble metal precursors. In this article, we developed a facile method for preparing porous Ag with a controllable structure at room temperature. Two kinds of Ag crystals with different porous structures were successfully prepared by using AgCl cubes as sacrificial templates. Through the galvanic replacement reaction of Zn and AgCl, Ag crystals with a sponge-like porous structure were successfully prepared. Additionally, using NaBH₄ as the reducing agent, we prepared granular porous Ag cubes by optimizing the amount of reducing agent. Both the sponge-like and granular porous Ag cubes have clean and accessible surfaces. In addition, we used the prepared two porous Ag cubes as substrate materials for SERS detection of five kinds of methamphetamine analogs. The experimental results show that the enhancement effect of granular porous Ag is better than that of sponge-like porous Ag. Furthermore, we probed the hot spot distribution of granular porous Ag by Raman mapping. By using granular porous Ag as the substrate material, we have achieved trace detection of 5 kinds of methamphetamine analogs including Ephedrine, Amphetamine, N-Methyl-1-(benzofuran-5-yl)propan-2-amine (5-MAPB), N-Methyl-1-(4-methoxyphenyl)propan-2-amine (PMMA) and N-Methyl-1-(4-fluorophenyl)propan-2-amine (4-FMA). Furthermore, to achieve qualitative differentiation of analogs with similar structures we performed density functional theoretical (DFT) calculations on the Raman spectra of the above analogs. The DFT calculations provided the vibrational frequencies, Raman activities, and normal mode assignment for each analog, enabling the qualitative differentiation of the above analogs.

Paper-Based Substrate for a Surface-Enhanced Raman Spectroscopy Biosensing Platform-A Silver/Chitosan Nanocomposite Approach

Paper is a popular platform material in all areas of sensor research due to its porosity, large surface area, and biodegradability, to name but a few. Many paper-based nanocomposites have been reported in the last decade as novel substrates for surface-enhanced Raman spectroscopy (SERS). However, there are still limiting factors, like the low density of hot spots or loss of wettability. Herein, we designed a process to fabricate a silver-chitosan nanocomposite layer on paper celluloses by a layer-by-layer method and pH-triggered chitosan assembly. Under microscopic observation, the resulting material showed a nanoporous structure, and silver nanoparticles were anchored evenly over the nanocomposite layer. In SERS measurement, the detection limit of 4-aminothiophenol was 5.13 ppb. Furthermore, its mechanical property and a strategy toward further biosensing approaches were investigated.

Recent advances in plasmonic Prussian blue-based SERS nanotags for biological application

The reliability and reproducibility of surface-enhanced Raman scattering (SERS) technology is still a great challenge in bio-related analysis. Prussian blue (PB)-based SERS tags have attracted increasing interest for improving these deficiencies due to its unique Raman band (near 2156 cm-1) in the Raman-silent region, providing zero-background bio-Raman labels without interference from endogenous biomolecules. Moreover, the stable PB shell consisting of multiple layers of CN- reporters ensure a stable and strong Raman signal output, avoiding the desorption of the Raman reporter from the plasmonic region by the competitive adsorption of the analyte. More importantly, they possess outstanding multiplexing potential in biological analysis owing to the adjustable Raman shift with unique narrow spectral widths. Despite more attention having been attracted to the structure and preparation of PB-based SERS tags for their better biological applications over the past five years, there is still a great challenge for SERS suitable for applications in the actual environment. The biological applications of PB-based SERS tags are comprehensively recounted in this minireview, mainly focusing on quantification analysis, multiple-spectral analysis and cell-imaging joint phototherapy. The prospects of PB-based SERS tags in clinical diagnosis and treatment are also discussed. This review aims to draw attention to the importance of SERS tags and provide a reference for the design and application of PB-based SERS tags in future bio-applications.

Synthesis of porous Au–Ag alloy nanorods with tunable plasmonic properties and intrinsic hotspots for surface-enhanced Raman scattering

The tunability of longitudinal plasmonic bands of P-AuAgNRs is realized to cover a wide range of wavelengths. P-AuAgNRs exhibit numerous internal hotspots which favor highly sensitive surface-enhanced Raman scattering detection.

A laser metallurgy route for the batch preparation of mm-scale 3D silver/graphite heteronanoclusters in air

We report a batch preparation of mm-scale 3D Ag hetero-nanoclusters which exhibit an excellent surface plasmon resonance ability via facile laser metallurgy. Under laser irradiation, the porous AgI-based coordination network crystals were instantly converted into 3D graphite-encapsulated Ag hetero-nanoclusters with uniform sizes and gaps in several seconds. The obtained hetero-nanoclusters exhibited superior 3D confocal laser energy utilization compared with the other 0D, 1D and 2D SERS substrates, solving the bottleneck caused by laser focusing deviation in the SERS active depth. The mass-produced SERS devices were ultra-sensitive for the detection of life and industrial organic pollutants in terms of low detection and enriched capacity.

Laser Printing of Plasmonic Nanosponges

Three-dimensional porous nanostructures made of noble metals represent novel class of nanomaterials promising for nonlinear nanooptics and sensors. Such nanostructures are typically fabricated using either reproducible yet time-consuming and costly multi-step lithography protocols or less reproducible chemical synthesis that involve liquid processing with toxic compounds. Here, we combined scalable nanosecond-laser ablation with advanced engineering of the chemical composition of thin substrate-supported Au films to produce nanobumps containing multiple nanopores inside. Most of the nanopores hidden beneath the nanobump surface can be further uncapped using gentle etching of the nanobumps by an Ar-ion beam to form functional 3D plasmonic nanosponges. The nanopores 10–150 nm in diameter were found to appear via laser-induced explosive evaporation/boiling and coalescence of the randomly arranged nucleation sites formed by nitrogen-rich areas of the Au films. Density of the nanopores can be controlled by the amount of the nitrogen in the Au films regulated in the process of their magnetron sputtering assisted with nitrogen-containing discharge gas.

Co-sputtering of gold and copper onto liquids: a route towards the production of porous gold nanoparticles

Effective methods for the synthesis of high-purity nanoparticles (NPs) have been extensively studied for a few decades. Among others, cold plasma-based sputtering metals onto a liquid substrate appears to be a very promising technique for the synthesis of high-purity NPs. The process enables the production of very small NPs without using any toxic reagents and complex chemical synthesis routes, and enables the synthesis of alloy NPs which can be the first step towards the formation of porous NPs. In this paper, the synthesis of gold-copper alloy NPs has been performed by co-sputtering gold and copper targets over pentaerythritol ethoxylate. The resulting solutions contain a mixture of gold, copper oxide, and alloy NPs having a radius of few angstroms. The annealing of these NPs, inside the solution, has been performed in order to increase their size and further induce the dealloying of the Au-Cu NPs. The resulting NPs exhibit either a nanoporous structure or are self-organized in an agglomerate of small NPs.

Synthesis of bimetallic silver-gold nanoparticle composites using a cellulose dope: Tunable nanostructure and its biological activity

Introducing functional metal nanoparticles (NPs) into flexible substrate is being increasingly attempted to expand their application. Here, we extend the synthesis of cellulose to its unmodified dope achieving freestanding nanocomposite decorated with bimetallic Ag-Au NPs through the one pot reaction. In the procedure, cellulose chain not only acts as a reducing agent but also a biocompatible support for NPs with a mean size of 7.9-9.7 nm. Meanwhile, changing the addition order of Ag⁺ and AuCl₄^- generated different atom arrangement in the bimetallic NPs. Moreover, the correlation of bioactivity to NP atom arrangement was studied. The result revealed that the nanocomposite containing NPs with an ultrathin Ag-rich outermost shell around an Au-rich core showed better bactericidal ability while lower cytotoxicity. In addition, the nanocomposite exhibited a sensitive SERS property for determination of R6G with a high enhancement factor of 10⁸.

Broadband SERS detection with disordered plasmonic hybrid aggregates

Plasmonic nanostructures possessing broadband intense field enhancement over a large area are highly desirable for nanophotonic and plasmonic device applications. In this study, 3D Ag hybrid nanoaggregates (3D-Ag-HNAs) are achieved via a highly efficient oblique angle gas-phase cluster beam deposition method. Not only can such structures produce a high density of plasmonic hot-spots to improve Raman sensitivity, but more importantly they generate kissing point-geometric singularities with a broadband optical response. We succeed in obtaining an experimental SERS enhancement factor beyond 4 × 10⁷ in the visible range, providing an optimal sensing platform for different analytes. Combined with good uniformity, reproducibility and ease of fabrication, our 3D-Ag-HNA offers a candidate for new generations of SERS systems.

Plasmonic nanosponges filled with silicon for enhanced white light emission

Plasmonic nanosponges are a powerful platform for various nanophotonic applications owing to extremely high local field enhancement in metallic nanopores. The filling of the nanopores with high-refractive index semiconductors (e.g. Si, Ge, GaP, etc.) opens up opportunities for the enhancement of nonlinear effects in these materials. However, this task remains challenging due to the lack of knowledge on the integration process of metal and high-index semiconductor components in such nanoobjects. Here, we investigate metal-dielectric nanoparticles fabricated from bilayer Si/Au films by the laser printing technique via a combination of theoretical and experimental methods. We reveal that these hybrid nanoparticles represent the Au sponge-like nanostructure filled with Si nanocrystallites. We also demonstrate that the Au net provides strong near-field enhancement in the Si grains increasing the white light photoluminescence in the hybrid nanostructures compared to uniform Si nanoparticles. These results pave the way for engineering the internal structure of the sponge-like hybrid nanoparticles possessing white light luminescence and control of their optical properties on demand.

Synergistic Enhancement Effect for Boosting Raman Detection Sensitivity of Antibiotics

In this paper, a two-step method is used to prepare a regenerative three-dimensional (3D) ZnO/Ag@Au substrate for developing a superior sensitive surface enhanced Raman scattering (SERS) method for detecting antibiotics. A great electromagnetic enhancement is observed from the as-prepared composite substrate, which is triggered by tuning the electron distribution of metals and semiconductor metal oxide. The strong interaction between target sample and the huge surface area of ZnO/Ag@Au composite promotes the charge transfer to produce promising chemical enhancement. The synergistic physical and chemical enhancement mechanisms are validated by density functional theory and finite difference time domain simulation. Additionally, the presence of light "echo effect" in the 3D structure of ZnO support could also amplify the efficiency of light excitation for Raman scattering. The above-stated merits benefit to boost the Raman scattering detection sensitivity for real samples. The ZnO/Ag@Au-based SERS substrate could detect rhodamine 6G molecules with an enhancement factor of up to 1.48 × 10⁹ and the lowest detectable concentration of 10^-10 M. As a real application, antibiotics sulfapyridine in milk is determined by using the proposed SERS protocol, and the limit of detection at 1 × 10^-9 M could be reached. As a prospective, the ZnO/Ag@Au-based SERS method would be extended for food safety and biomedicine analysis.

Toward Flexible Surface-Enhanced Raman Scattering (SERS) Sensors for Point-of-Care Diagnostics

Surface-enhanced Raman scattering (SERS) spectroscopy provides a noninvasive and highly sensitive route for fingerprint and label-free detection of a wide range of molecules. Recently, flexible SERS has attracted increasingly tremendous research interest due to its unique advantages compared to rigid substrate-based SERS. Here, the latest advances in flexible substrate-based SERS diagnostic devices are investigated in-depth. First, the intriguing prospect of point-of-care diagnostics is briefly described, followed by an introduction to the cutting-edge SERS technique. Then, the focus is moved from conventional rigid substrate-based SERS to the emerging flexible SERS technique. The main part of this report highlights the recent three categories of flexible SERS substrates, including actively tunable SERS, swab-sampling strategy, and the in situ SERS detection approach. Furthermore, other promising means of flexible SERS are also introduced. The flexible SERS substrates with low-cost, batch-fabrication, and easy-to-operate characteristics can be integrated into portable Raman spectroscopes for point-of-care diagnostics, which are conceivable to penetrate global markets and households as next-generation wearable sensors in the near future.

Facile synthesis of silver-rich Au/Ag bimetallic nanoparticles with highly active SERS properties

A one-pot route to the synthesis of Au/Ag bimetallic nanoparticles with a high SERS activity for detection of proteins at low concentration.