An ultra-thin carbon-fabric/graphene/poly(vinylidene fluoride) film for enhanced electromagnetic interference shielding

Graphene and Iron Reinforced Polymer Composite Electromagnetic Shielding Applications: A Review

With advancements in the automated industry, electromagnetic inferences (EMI) have been increasing over time, causing major distress among the end-users and affecting electronic appliances. The issue is not new and major work has been done, but unfortunately, the issue has not been fully eliminated. Therefore, this review intends to evaluate the previous carried-out studies on electromagnetic shielding materials with the combination of Graphene@Iron, Graphene@Polymer, Iron@Polymer and Graphene@Iron@Polymer composites in X-band frequency range and above to deal with EMI. VOSviewer was also used to perform the keyword analysis which shows how the studies are interconnected. Based on the carried-out review it was observed that the most preferable materials to deal with EMI are polymer-based composites which showed remarkable results. It is because the polymers are flexible and provide better bonding with other materials. Polydimethylsiloxane (PDMS), polyaniline (PANI), polymethyl methacrylate (PMMA) and polyvinylidene fluoride (PVDF) are effective in the X-band frequency range, and PDMS, epoxy, PVDF and PANI provide good shielding effectiveness above the X-band frequency range. However, still, many new combinations need to be examined as mostly the shielding effectiveness was achieved within the X-band frequency range where much work is required in the higher frequency range.

A Carbon Composite Film with Three-Dimensional Reticular Structure for Electromagnetic Interference Shielding and Electro-Photo-Thermal Conversion

The design of flexible wearable electronic devices that can shield electromagnetic waves and work in all weather conditions remains a challenge. We present in this work a low-cost technology to prepare an ultra-thin carbon fabric-graphene (CFG) composite film with outstanding electromagnetic interference shielding effectiveness (EMI SE) and electro-photo-thermal effect. The compatibility between flexible carbon fabric skeleton and brittle pure graphene matrix empowers this CFG film with adequate flexibility. The reticular fibers and porous structures play a vital role in multiple scattering and absorption of electromagnetic waves. In the frequency range of 30-1500 MHz, the CFG film can achieve a significantly high EMI SE of about 46 dB at tiny thickness (0.182 mm) and density (1.4 g cm^-3) predominantly by absorption. At low safe voltages or only in sunlight, the film can self-heat to its saturation value rapidly in 40 s. Once the electricity or light supply is stopped, it can quickly dissipate heat in tens of seconds. A combination of the EMI SE and the prominent electro-photo-thermal effect further enables such a remarkable EMI shielding film to have more potential applications for communication devices in extreme zones.

Recent Progress in Graphene/Polymer Nanocomposites

Nanocomposites, multiphase solid materials with at least one nanoscaled component, have been attracting ever-increasing attention because of their unique properties. Graphene is an ideal filler for high-performance multifunctional nanocomposites in light of its superior mechanical, electrical, thermal, and optical properties. However, the 2D nature of graphene usually gives rise to highly anisotropic features, which brings new opportunities to tailor nanocomposites by making full use of its excellent in-plane properties. Here, recent progress on graphene/polymer nanocomposites is summarized with emphasis on strengthening/toughening, electrical conduction, thermal transportation, and photothermal energy conversion. The influence of the graphene configuration, including layer number, defects, and lateral size, on its intrinsic properties and the properties of graphene/polymer nanocomposites is systematically analyzed. Meanwhile, the role of the interfacial interaction between graphene and polymer in affecting the properties of nanocomposites is also explored. The correlation between the graphene distribution in the matrix and the properties of the nanocomposite is discussed in detail. The key challenges and possible solutions are also addressed. This review may provide a constructive guidance for preparing high-performance graphene/polymer nanocomposite in the future.

Multifunctional, durable and highly conductive graphene/sponge nanocomposites

Porous functional materials play important roles in a wide variety of growing research and industrial fields. We herein report a simple, effective method to prepare porous functional graphene composites for multi-field applications. Graphene sheets were non-chemically modified by Triton^®X-100, not only to maintain high structural integrity but to improve the dispersion of graphene on the pore surface of a sponge. It was found that a graphene/sponge nanocomposite at 0.79 wt.% demonstrated ideal electrical conductivity. The composite materials have high strain sensitivity, stable fatigue performance for 20 000 cycles, short response time of 0.401 s and fast response to temperature and pressure. In addition, the composites are effective in monitoring materials deformation and acoustic attenuation with a maximum absorption rate 67.78% and it can be used as electrodes for a supercapacitor with capacitance of 18.1 F g^-1. Moreover, no expensive materials or complex equipment are required for the composite manufacturing process. This new methodology for the fabrication of multifunctional, durable and highly conductive graphene/sponge nanocomposites hold promise for many other applications.

Preparation of Flexible Carbon Fiber Fabrics with Adjustable Surface Wettability for High-Efficiency Electromagnetic Interference Shielding

In the 5G era, for portable electronics to operate at high performance and low power levels, the incorporation of superior electromagnetic interference (EMI) shielding materials within the packages is of critical importance. A desirable wearable EMI shielding material is one that is lightweight, structurally flexible, air-permeable, and able to self-clean. To this end, a bioinspired electroless silver plating strategy and a one-step electrodeposition method are utilized to prepare an EMI shielding fabric (CEF-NF/PDA/Ag/50-30) that possesses these desirable properties. Porous CEF-NF mats with a spatially distributed silver coating create efficient pathways for electron movement and enable a remarkable conductivity of 370 S mm^-1. When tested within a frequency range of 8.2-12.4 GHz, this highly conductive fabric not only achieves an EMI shielding effectiveness (EMI SE of 101.27 dB at 5028 dB cm² g^-1) comparable to a very thin and light metal but also retains the unique properties of fabrics-being light, structurally flexible, and breathable. In addition, it exhibits a high contact angle (CA) of 156.4° with reversible surface wettability. After having been subjected to 1000 cycles of bending, the performance of the fabric only decreases minimally. This strategy potentially provides a novel way to design and manufacture an easily integrated EMI shielding fabric for flexible wearable devices.