Proton irradiation of graphene: insights from atomistic modeling

Proton-fluence dependent magnetic properties of exfoliable quasi-2D van der Waals Cr2Si2Te6magnet

The discovery of long-range magnetic ordering in atomically thin materials catapulted the van der Waals (vdW) family of compounds into an unprecedented popularity, leading to potentially important technological applications in magnetic storage and magneto-transport devices, as well as photoelectric sensors. With the potential for the use of vdW materials in space exploration technologies it is critical to understand how the properties of such materials are affected by ionizing proton irradiation. Owing to their robust intra-layer stability and sensitivity to external perturbations, these materials also provide excellent opportunities for studying proton irradiation as a non-destructive tool for controlling their magnetic properties. Specifically, the exfoliable Cr2Si2Te6(CST) is a ferromagnetic semiconductor with the Curie temperature (TC) of ∼32 K. Here, we have investigated the magnetic properties of CST upon proton irradiation as a function of fluence (1 × 1015, 5 × 1015, 1 × 1016, 5 × 1016, and 1 × 1018H+/cm-2) by employing variable-temperature, variable-field magnetization measurements, and detail how the magnetization, magnetic anisotropy vary as a function of proton fluence across the magnetic phase transition. While theTCremains constant as a function of proton fluence, we observed that the saturation magnetization and magnetic anisotropy diverge at the proton fluence of 5 × 1016H+/cm-2, which is prominent in the ferromagnetic phase, in particular.This work demonstrates that proton irradiation is a feasible method for modifying the magnetic properties and local magnetic interactions of vdWs crystals, which represents a significant step forward in the design of future spintronic and magneto-electronic applications.

Engineering Vacancies for the Creation of Antisite Defects in Chemical Vapor Deposition Grown Monolayer MoS2 and WS2 via Proton Irradiation

It is critical to understand the laws of quantum mechanics in transformative technologies for computation and quantum information science applications to enable the ongoing second quantum revolution calls. Recently, spin qubits based on point defects have gained great attention, since these qubits can be initiated, selectively controlled, and read out with high precision at ambient temperature. The major challenge in these systems is controllably generating multiqubit systems while properly coupling the defects. To address this issue, we began by tackling the engineering challenges these systems present and understanding the fundamentals of defects. In this regard, we controllably generate defects in MoS2 and WS2 monolayers and tune their physicochemical properties via proton irradiation. We quantitatively discovered that the proton energy could modulate the defects' density and nature; higher defect densities were seen with lower proton irradiation energies. Three distinct defect types were observed: vacancies, antisites, and adatoms. In particular, the creation and manipulation of antisite defects provides an alternative way to create and pattern spin qubits based on point defects. Our results demonstrate that altering the particle irradiation energy can regulate the formation of defects, which can be utilized to modify the properties of 2D materials and create reliable electronic devices.

Describing the scattering of keV protons through graphene

Implementing two-dimensional materials in technological solutions requires fast, economic, and non-destructive tools to ensure efficient characterization. In this context, scattering of keV protons through free-standing graphene was proposed as an analytical tool. Here, we critically evaluate the predicted effects using classical simulations including a description of the lattice's thermal motion and the membrane corrugation via statistical averaging. Our study shows that the zero-point motion of the lattice atoms alone leads to considerable broadening of the signal that is not properly described by thermal averaging of the interaction potential. In combination with the non-negligible probability for introducing defects, it limits the prospect of proton scattering at 5 keV as an analytic tool.

Crumpling Defective Graphene Sheets

Upon crumpling, graphene sheets yield intriguing hierarchical structures with high resistance to compression and aggregation, garnering a great deal of attention in recent years for their remarkable potential in a variety of applications. Here, we aim to understand the effect of Stone-Wales (SW) defects, i.e., a typical topological defect of graphene, on the crumpling behavior of graphene sheets at a fundamental level. By employing atomistically informed coarse-grained molecular dynamics (CG-MD) simulations, we find that SW defects strongly influence the sheet conformation as manifested by the change in size scaling laws and weaken the self-adhesion of the sheet during the crumpling process. Remarkably, the analyses of the internal structures (i.e., local curvatures, stresses, and cross-section patterns) of crumpled graphene emphasize the enhanced mechanical heterogeneity and "glass-like" amorphous state elicited by SW defects. Our findings pave the way for understanding and exploring the tailored design of crumpled structure via defect engineering.

Impact of Proton Irradiation on Medium Density Polyethylene/Carbon Nanocomposites for Space Shielding Applications

The development of novel materials with improved radiation shielding capability is a fundamental step towards the optimization of passive radiation countermeasures. Polyethylene (PE) nanocomposites filled with carbon nanotubes (CNT) or graphene nanoplatelets (GNP) can be a good compromise for maintaining the radiation shielding properties of the hydrogen-rich polymer while endowing the material with multifunctional properties. In this work, nanocomposite materials based on medium-density polyethylene (MDPE) loaded with different amounts of multi-walled carbon nanotubes (MWCNT), GNPs, and hybrid MWCNT/GNP nanofillers were fabricated, and their properties were examined before and after proton exposure. The effects of irradiation were evaluated in terms of modifications in the chemical and physical structure, wettability, and surface morphology of the nanocomposites. The aim of this work was to define and compare the MDPE-based nanocomposite behavior under proton irradiation in order to establish the best system for applications as space shielding materials.

Effect of Electron and Proton Irradiation on Structural and Electronic Properties of Carbon Nanowalls

In this work, a complex experimental study of the effect of electron and proton ionizing radiation on the properties of carbon nanowalls (CNWs) is carried out using various state-of-the-art materials characterization techniques. CNW layers on quartz substrates were exposed to 5 MeV electron and 1.8 MeV proton irradiation with accumulated fluences of 7 × 10¹³ e/cm² and 10¹² p/cm², respectively. It is found that depending on the type of irradiation (electron or proton), the morphology and structural properties of CNWs change; in particular, the wall density decreases, and the sp² hybridization component increases. The morphological and structural changes in turn lead to changes in the electronic, optical, and electrical characteristics of the material, in particular, change in the work function, improvement in optical transmission, an increase in the surface resistance, and a decrease in the specific conductivity of the CNW films. Lastly, this study highlights the potential of CNWs as nanostructured functional materials for novel high-performance radiation-resistant electronic and optoelectronic devices.

First-Principles Insights on the Formation Mechanism of Innermost Layers of Solid Electrolyte Interphases on Carbon Anodes for Lithium-Ion Batteries

A solid electrolyte interphase (SEI) plays an essential role in the functionality and service life of ion batteries, where the structure and formation mechanism are still in the midst. Here, we investigate the initial decomposition and reactions of ethylene carbonate (EC) on the surface of a graphite anode using first-principles calculations. EC initially decomposes via the homolytic ring opening with the product of radical anion CH₂CH₂OCO₂^-. Bonding with Li, it forms a co-plane structure of CH₂CH₂OCO₂Li, with a binding energy of 1.35 eV. The adsorption energy is -0.91 eV and -0.24 eV on the graphite zigzag edge surface and basal surface, respectively. Two CH₂CH₂OCO₂Li molecules react to form a two-head structure of lithium ethylene dicarbonate (CH₂OCO₂Li)₂, namely LEDC, which further forms a network preferring zigzag edge surfaces. Our results suggest that the first and innermost layers of the solid electrolyte interphase are CH₂CH₂OCO₂Li sticking and networking on the zigzag edges of the surfaces of graphite anodes.

Mechanical Properties and Buckling of Kagome Graphene under Tension: A Molecular Dynamics Study

Kagome graphene is a carbon allotrope similar to graphene, with a single-atom thickness and a co-planar atomic structure. Despite interesting electronic properties, its mechanical behavior is still elusive. We have investigated the tensile properties of Kagome graphene under various strain rates and finite temperatures using molecular dynamics simulations. The Young’s modulus, ultimate tensile strength, fracture strain, and fracture toughness of the unsupported bulk material were measured as 96 GPa, 43 GPa, 0.05, and 1.9 J m−3, respectively, at room temperature and a strain rate of 109 s−1. Two deformation-stages were observed under tensile loading: normal and wrinkled. Initially, the Kagome graphene system stays in a co-planar structure without wrinkling until the tensile strain reaches 0.04, where it starts to wrinkle, unlike graphene. The wrinkle wavelength and magnitude suggest a very low bending rigidity, and wrinkle formation does not follow a rate predicted by continuum mechanics. Furthermore, the fracture mechanism of wrinkled Kagome graphene is briefly discussed.

Defect-Dependent Corrugation in Graphene

Graphene's intrinsically corrugated and wrinkled topology fundamentally influences its electronic, mechanical, and chemical properties. Experimental techniques allow the manipulation of pristine graphene and the controlled production of defects which allows one to control the atomic out-of-plane fluctuations and thus tune graphene's properties. Here, we perform large scale machine learning-driven molecular dynamics simulations to understand the impact of defects on the structure of graphene. We find that defects cause significantly higher corrugation leading to a strongly wrinkled surface. The magnitude of this structural transformation strongly depends on the defect concentration and specific type of defect. Analyzing the atomic neighborhood of the defects reveals that the extent of these morphological changes depends on the preferred geometrical orientation and the interactions between defects. While our work highlights that defects can strongly affect graphene's morphology, it also emphasizes the differences between distinct types by linking the global structure to the local environment of the defects.

Nanopores in two-dimensional materials: accurate fabrication

Two-dimensional (2D) materials such as graphene and molybdenum disulfide have been demonstrated with a wide range of applications in electronic devices, chemical catalysis, single-molecule detection, and energy conversion. In the 2D materials, nanopores can be created, and the 2D nanoporous membranes possess many unique properties such as ultrathin thickness, high surface area, and excellent particle sieving capability, showing extraordinary promise in plenty of applications, such as sea water desalination, gas separation, and DNA sequencing. The performances of these membranes are mainly determined by the nanopore size, structure, and density, which, in turn, rely on the fabrication techniques of the nanopores. This review covers the important progress of nanopore fabrication in 2D materials and comprehensively compares these methods for the features of the introduced nanopores and their formation processes. Future perspectives are discussed on the opportunities and challenges in fabricating high-grade 2D nanopores.

Electronic excitation in graphene under single-particle irradiation

Single-particle irradiation is a typical condition in space applications, which could be detrimental for electronic devices through processes such as single-event upset or latch-up. For functional devices made of few-atom-thick monolayers that are entirely exposed to the environment, the irradiation effects could be manifested through localized or delocalized electronic excitation, in addition to lattice defect creation. In this work, we explore the single-H irradiation effects on bare or coated graphene monolayers. Real-time time-dependent density functional theory-based first-principles calculation results elucidate the evolution of charge densities in the composite system, showing notable charge excitation but negligible charge deposition. A hexagonal boron nitride coating layer does not protect graphene from these processes. Principal component analysis demonstrates the dominance of localized excitation accompanied by nuclear motion, bond distortion and vibration, as well as a minor contribution from delocalized plasmonic excitation. The significance of coupled electron-ion dynamics in modulating the irradiation processes is identified from comparative studies on the spatial and temporal patterns of excitation for unconstrained and constrained lattices. The stopping power or energy deposition is also calculated, quantifying the dissipative nature of charge density excitation. This study offers fundamental understandings of the single-particle irradiation effects on optoelectronic devices constructed from low-dimensional materials, and inspires unconventional techniques to excite the electrons and ions in a controllable way.

Facile Fabrication of Subnanopores in Graphene under Ion Irradiation: Molecular Dynamics Simulations

Two-dimensional (2D) nanoporous membranes have attracted great interest in water desalination, energy conversion, electrode, and gas separation. The performances of these membranes are mainly determined by the nanopores, and only with satisfactory subnanometer pores can applications such as high-precision ion separation be realized. Therefore, to efficiently create subnanopores in 2D materials is of great importance. Here, using molecular dynamics simulations, we demonstrate that the direct irradiation of energetic ion is capable of introducing subnanopores in monolayer graphene. By changing the energy of the incident Au ion, the averaged pore diameter can be adjusted from 4.2 to 5.6 Å, and pore diameter distributions are narrow. In the formation processes of the subnanopores, the cascade collisions caused by the primary knock-on atom (PKA) predominates, and pores can only be created in ion impact positions close to the PKA, especially for the incident ion with high energy. Our results show the promise of ion irradiation as a facile method to fabricate subnanopores in 2D materials. As hydrated ions, gases, and small organic molecules have diameters of several angstroms, close to the pore sizes, the created nanoporous membranes can be used to separate those matter, which is conducive to accelerating related applications.