Influence of defect structure on colour tunability and magneto optical behaviour of WO3 nanoforms

Optimizing Hydrogen and Hydroxyl Adsorption over Ru/WO2.9 Metal/Metalloid Heterostructure Electrocatalysts for Highly Efficient and Stable Hydrogen Oxidation Reactions in Alkaline Media

The development of high-performance, stable and platinum-free electrocatalysts for the hydrogen oxidation reaction (HOR) in alkaline media is crucial for the commercial application of anion exchange membrane fuel cells (AEMFCs). Ruthenium, as an emerging HOR electrocatalyst with a price advantage over platinum, still needs to solve the problems of low intrinsic activity and easy oxidation. Herein, Ru nanoparticles are anchored on the oxygen-vacancy-rich metalloid WO2.9 by interfacial engineering to create abundant and efficient Ru and WO2.9 interfacial active sites for accelerated HOR in alkaline media. Ru/WO2.9 /C displays excellent catalytic activity with mass activity (8.29 A mgNM -1 ) and specific activity (1.32 mA cmNM -2 ), which are 2.5/3.3 and 21.8/8.3 times that of PtRu/C and Pt/C, respectively. Moreover, Ru/WO2.9 /C exhibits excellent CO tolerance and operational stability. Experimental and theoretical studies reveal that the improved charge transfer from Ru to WO2.9 in the metal/metalloid heterostructure significantly tune the electronic structure of Ru sites and optimize the hydrogen binding energy (HBE) of Ru. While, WO2.9 provides abundant hydroxyl adsorption sites. Therefore, the equilibrium adsorption of hydrogen and hydroxyl at the interface of Ru/WO2.9 will be realized, and the oxidation of metal Ru would be avoided, thereby achieving excellent HOR activity and durability.

Evaluation of Zn: WO3 Thin Films as a Sensing Layer for Detection of NH3 Gas

Pristine WO₃ and Zn-doped WO₃ were synthesized using the spray pyrolysis technique to detect ammonia gas. The prominent orientation of the crystallites along the (200) plane was evident from X-ray diffraction (XRD) studies. Scanning Electron Microscope (SEM) morphology indicated well-defined grains upon Zn doping with a smaller grain size of 62 nm for Zn-doped WO₃ (Zn: WO₃) film. The photoluminescence (PL) emission at different wavelengths was assigned to defects such as oxygen vacancies, interstitial oxygens, localized defects, etc. X-ray Photoelectron spectroscopy (XPS) studies confirmed the formation of oxygen vacancies in the deposited films. The ammonia (NH₃) sensing analysis of the deposited films was carried out at an optimum working temperature of 250 °C. The sensor performance of Zn: WO₃ was enhanced compared to pristine WO₃ at 1 ppm NH₃ concentration, elucidating the possibility of the films in sensing applications.

Enhanced photoluminescence of potassium-doped tungsten oxide by acetone exposure

Studies of optical properties of doped nanocrystals of tungsten trioxide can elucidate new information about the material. A novel molecule-enhanced photoluminescence (PL) of potassium-doped tungsten trioxide (K _x WO) was explored in the presence of different gases to understand charge transfer between molecules and K _x WO on the properties of the material. We performed Raman spectroscopy and PL experiments in the presence of gaseous acetone or ethanol mixed with other gases (N₂ and O₂). PL at 630 nm from K _x WO was observed and further enhanced when the sample was continuously irradiated with a 532 nm CW laser in acetone. A mechanism of strong emission of the PL induced by the charge transfer between the acetone and the K _x WO is proposed.

Photoirradiation-Induced Capacitance Enhancement in the h-WO3/Bi2WO6 Submicron Rod Heterostructure under Simulated Solar Illumination and Its Postillumination Capacitance Enhancement Retainment from a Photocatalytic Memory Effect

Recently, photoassisted charging has been demonstrated as a green and sustainable approach to successfully enhance the capacitance of supercapacitors with low cost and good efficiency. However, their light-induced capacitance enhancement is relatively low and is lost quickly when the illumination is off. In this work, a novel active material system is developed for supercapacitors with the photoassisted charging capability by the decoration of a small amount of Bi₂WO₆ nanoparticles on an h-WO₃ submicron rod surface in situ, which forms a typical type II band alignment heterostructure with a close contact interface through the co-sharing of W atoms between h-WO₃ submicron rods and Bi₂WO₆ nanoparticles. The photogenerated charge carrier separation and transfer are largely enhanced in the h-WO₃/Bi₂WO₆ submicron rod electrode, which subsequently allows more charge carriers to participate in its photoassisted charging process to largely enhance its capacitance improvement under simulated solar illumination than that of the h-WO₃ submicron rod electrode. Furthermore, the h-WO₃/Bi₂WO₆ submicron rod electrode could retain its photoinduced capacitance enhancement in the dark for an extended period of time from the photocatalytic memory effect. Thus, our work provides a solution to the two major drawbacks of reported supercapacitors with the light-induced capacitance enhancement property, and supercapacitors based on active materials with the photocatalytic memory effect could be utilized in various technical fields.

Efficient photocatalytic conversion of benzene to phenol on stabilized subnanometer WO3 quantum dots

Subnanometer WO3 quantum dots are spontaneously produced in a mesoporous silica matrix. Efficient photocatalytic conversion of benzene to phenol without decomposition of the product is realized by band engineering with a strong quantum size effect.