Davydov splitting and singlet fission in excitonically coupled pentacene dimers

Singlet fission in TIPS-anthracene thin films

Singlet fission is an exciton multiplication process that allows for the conversion of one singlet exciton into two triplet excitons. Organic semiconductors, such as acenes and their soluble bis(triisopropylsilylethynyl) (TIPS) substituted counterparts, have played a major role in elucidating the understanding of the underlying mechanisms of singlet fission. Despite this, one prominent member of the acene family that has received little experimental attention to date is TIPS-anthracene, even with computational studies suggesting potential high singlet fission yields in the solid state. Here, time-resolved spectroscopic and magneto-photoluminescence measurements were performed on spin-cast films of TIPS-anthracene, showing evidence for singlet fission. A singlet fission yield of 19% (out of 200%) is estimated from transient absorption spectroscopy. Kinetic modeling of the magnetic field effect on photoluminescence suggests that fast rates of triplet dissociation lead to a low magnetic photoluminescence effect and that non-radiative decay of both the S1 and 1(TT) states is the cause for the low triplet yield.

Controlling Interchromophore Coupling in Diamantane-Linked Pentacene Dimers To Create a "Binary" Pair

Two isomeric pentacene dimers, each linked by a diamantane spacer, have been synthesized. These dimers are designed to provide experimental evidence to support quantum mechanical calculations, which predict the substitution pattern on the carbon-rich diethynyldiamantane spacer to be decisive in controlling the interpentacene coupling. Intramolecular singlet fission (i-SF) serves as a probe for the existence and strength of the electronic coupling between the two pentacenes, with transient absorption spectroscopy as the method of choice to characterize i-SF. 4,9-Substitution of diamantane provides a pentacene dimer (4,9-dimer) in which the two chromophores are completely decoupled and that, following photoexcitation, deactivates to the ground state analogous to a monomeric pentacene chromophore. Conversely, 1,6-substitution provides a pentacene dimer (1,6-dimer) that exhibits sufficiently strong coupling to drive i-SF, resulting in correlated triplet M(T1T1) yields close to unity and free triplet (T1 + T1) yields of ca. 50%. Thus, the diamantane spacer effectively switches "on" or "off" the coupling between the chromophores, based on the substitution pattern. The binary control of diamantane contrasts other known molecular spacers designed only to modulate the coupling strength between two pentacenes.

Simultaneous Intra- and Intermolecular Singlet Fission in Bipentacene Macrocycle Aggregates

Singlet fission (SF) is a process where a singlet state splits into two triplet states, which is essential for enhancing optoelectronic devices. Macrocyclic structures allow for precise control of chromophore orientation and facilitate singlet fission in solutions. However, the behavior of these structures in thin films, crucial for solid-state device optimization, remains underexplored. This study examines the aggregation and singlet fission processes of bipentacene macrocycles (BPc) in thin films using molecular dynamics simulations and electronic structure calculations. Findings indicate that BPc aggregates more rapidly with less chloroform, aligning parallel to the substrate. Intramolecular singlet fission (iSF) rates are rarely changed during evaporation, but the efficiency of intermolecular singlet fission (xSF) improves due to the increase in packing domains, suggesting that orderly crystal domains are not necessary for device efficiency. This opens avenues for varied device designs and traditional solution-based methods for optimal device development.

The Effect of Torsional Motion on Multiexciton Formation through Intramolecular Singlet Fission in Ferrocene-Bridged Pentacene Dimers

A series of ferrocene(Fc)-bridged pentacene(Pc)-dimers [Fc-Ph(2,n)-(Pc)2 : n=number of phenylene spacers] were synthesized to examine the tortional motion effect of Fc-terminated phenylene linkers on strongly coupled quintet multiexciton (5 TT) formation through intramolecular singlet fission (ISF). Fc-Ph(2,4)-(Pc)2 has a relatively small electronic coupling and large conformational flexibility according to spectroscopic and theoretical analyses. Fc-Ph(2,4)-(Pc)2 exhibits a high-yield 5 TT together with quantitative singlet TT (1 TT) generation through ISF. This demonstrates a much more efficient ISF than those of other less flexible Pc dimers. The activation entropy in 1 TT spin conversion of Fc-Ph(2,4)-(Pc)2 is larger than those of the other systems due to the larger conformational flexibility associated with the torsional motion of the linkers. The torsional motion of linkers in 1 TT is attributable to weakened metal-ligand bonding in the Fc due to hybridization of the hole level of Pc to Fc in 1 TT unpaired orbitals.

Intramolecular Triplet Diffusion Facilitates Triplet Dissociation in a Pentacene Hexamer

Triplet dynamics in singlet fission depend strongly on the strength of the electronic coupling. Covalent systems in solution offer precise control over such couplings. Nonetheless, efficient free triplet generation remains elusive in most systems, as the intermediate triplet pair 1 (T1 T1 ) is prone to triplet-triplet annihilation due to its spatial confinement. In the solid state, entropically driven triplet diffusion assists in the spatial separation of triplets, resulting in higher yields of free triplets. Control over electronic coupling in the solid state is, however, challenging given its sensitivity to molecular packing. We have thus developed a hexameric system (HexPnc) to enable solid-state-like triplet diffusion at the molecular scale. This system is realized by covalently tethering three pentacene dimers to a central subphthalocyanine scaffold. Transient absorption spectroscopy, complemented by theoretical structural optimizations and steady-state spectroscopy, reveals that triplet diffusion is indeed facilitated due to intramolecular cluster formation. The yield of free triplets in HexPnc is increased by a factor of up to 14 compared to the corresponding dimeric reference (DiPnc). Thus, HexPnc establishes crucial design aspects for achieving efficient triplet dissociation in strongly coupled systems by providing avenues for diffusive separation of 1 (T1 T1 ), while, concomitantly, retaining strong interchromophore coupling which preserves rapid formation of 1 (T1 T1 ).

Re-Thinking Dimer Design Principles with Indolonaphthyridine Intramolecular Singlet Fission

Singlet fission is a phenomenon that could significantly improve the efficiency of photovoltaic devices. Indolonaphthyridine thiophene (INDT) is a photostable singlet fission material that could potentially be utilised in singlet fission-based photovoltaic devices. This study investigates the intramolecular singlet fission (i-SF) mechanism of INDT dimers linked via para-phenyl, meta-phenyl and fluorene bridging groups. Using ultra-fast spectroscopy the highest rate of singlet fission is found in the para-phenyl linked dimer. Quantum calculations show the para-phenyl linker encourages enhanced monomer electronic coupling. Increased rates of singlet fission were also observed in the higher polarity o-dichlorobenzene, relative to toluene, indicating that charge-transfer states have a role in mediating the process. The mechanistic picture of polarisable singlet fission materials, such as INDT, extends beyond the traditional mechanistic landscape.

Leveraging Charge-Transfer Interactions in Through-Space-Coupled Pentacene Dendritic Oligomer for Singlet Exciton Fission

Singlet exciton fission in organic chromophores has received much attention during the past decade. Inspired by numerous spectroscopic studies in the solid state, there have been vigorous efforts to study singlet exciton fission dynamics in covalently bonded oligomers, which aims to investigate underlying mechanisms of this intriguing process in simplified model systems. In terms of through-space orbital interactions, however, most of covalently bonded pentacene oligomers studied so far fall into weakly interacting systems since they manifest chain-like structures based on various (non)conjugated linkers. Therefore, it remains as a compelling question to answer how through-space interactions in the solid state intervene this photophysical process since it is hypersensitive to displacements and orientations between neighboring chromophores. Herein, as one of experimental studies to answer this question, we introduced a tight-packing dendritic structure whose mesityl-pentacene constituents are coupled via moderate through-space orbital interactions. Based on the comparison with a suitably controlled dendritic structure, which is in a weak coupling regime, important mechanistic viewpoints are tackled such as configurational mixings between singlet, charge-transfer, and triplet pair states and the role of chromophore multiplication. We underscore that our through-space-coupled dendritic oligomer in a quasi-intermediate coupling regime provides a hint on the interplay of multiconfigurational excited-states, which might have drawn complexity in singlet exciton fission kinetics throughout numerous solid-state morphologies.

Tetracene Dimers: A Platform for Intramolecular Down- and Up-conversion

Photon energy conversion can be accomplished in many different ways, including the two opposing manners, down-conversion (i.e., singlet fission, SF) and up-conversion (i.e., triplet-triplet annihilation up-conversion, TTA-UC). Both processes have the potential to help overcome the detailed balance limit of single-junction solar cells. Tetracene, in which the energies of the lowest singlet excited state and twice the triplet excited state are comparable, exhibits both down- and up-conversion. Here, we have designed meta-diethynylphenylene- and 1,3-diethynyladamantyl-linked tetracene dimers, which feature different electronic coupling, to characterize the interplay between intramolecular SF (intra-SF) and intramolecular TTA-UC (intra-TTA-UC) via steady-state and time-resolved absorption and fluorescence spectroscopy. Furthermore, we have used Pd-phthalocyanine as a sensitizer to enable intra-TTA-UC in the two dimers via indirect photoexcitation in the near-infrared part of the solar spectrum. The work is rounded off by temperature-dependent measurements, which outline key aspects of how thermal effects impact intra-SF and intra-TTA-UC in different dimers.

Efficient Intramolecular Singlet Fission in Spiro-Linked Heterodimers

We investigate intramolecular singlet fission (iSF) of spiro-linked azaacene heterodimers by time-resolved spectroscopy and quantum chemical calculations. Combining two different azaacenes through a nonconjugated linker using condensation chemistry furnishes azaacene heterodimers. Compared to their homodimers, iSF quantum yields are improved at an extended absorption range. The driving force of iSF, the energy difference ΔEiSF between the S1 state and the correlated triplet pair 1(TT), is tuned by the nature of the heterodimers. iSF is exothermic in all of the herein studied molecules. The overall quantum yield for triplet exciton formation reaches approximately 174%. This novel concept exploits large energy differences between singlet electronic states in combination with spatially fixed chromophores, which achieves efficient heterogeneous iSF, if the through-space interaction between the chromophores is minimal.

Helical polymers for dissymmetric circularly polarized light imaging

Control of the spin angular momentum (SAM) carried in a photon provides a technologically attractive element for next-generation quantum networks and spintronics^1-5. However, the weak optical activity and inhomogeneity of thin films from chiral molecular crystals result in high noise and uncertainty in SAM detection. Brittleness of thin molecular crystals represents a further problem for device integration and practical realization of chiroptical quantum devices^6-10. Despite considerable successes with highly dissymmetric optical materials based on chiral nanostructures^11-13, the problem of integration of nanochiral materials with optical device platforms remains acute^14-16. Here we report a simple yet powerful method to fabricate chiroptical flexible layers via supramolecular helical ordering of conjugated polymer chains. Their multiscale chirality and optical activity can be varied across the broad spectral range by chiral templating with volatile enantiomers. After template removal, chromophores remain stacked in one-dimensional helical nanofibrils producing a homogeneous chiroptical layer with drastically enhanced polarization-dependent absorbance, leading to well-resolved detection and visualization of SAM. This study provides a direct path to scalable realization of on-chip detection of the spin degree of freedom of photons necessary for encoded quantum information processing and high-resolution polarization imaging.

Sensitized Singlet Fission in Rigidly Linked Axial and Peripheral Pentacene-Subphthalocyanine Conjugates

The goal of harnessing the theoretical potential of singlet fission (SF), a process in which one singlet excited state is split into two triplet excited states, has become a central challenge in solar energy research. Covalently linked dimers provide crucial models for understanding the role of chromophore arrangement and coupling in SF. Sensitizers can be integrated into these systems to expand the absorption bandwidth through which SF can be accessed. Here, we define the role of the sensitizer-chromophore geometry in a sensitized SF model system. To this end, two conjugates have been synthesized consisting of a pentacene dimer (SF motif) connected via a rigid alkynyl bridge to a subphthalocyanine (the sensitizer motif) in either an axial or a peripheral arrangement. Steady-state and time-resolved photophysical measurements are used to confirm that both conjugates operate as per design, displaying near unity energy transfer efficiencies and high triplet quantum yields from SF. Decisively, energy transfer between the subphthalocyanine and pentacene dimer occurs ca. 26 times faster in the peripheral conjugate, even though the two chromophores are ca. 3 Å farther apart than in the axial conjugate. Following a theoretical evaluation of the dipolar coupling, V_dip², and the orientation factor, κ², of both the axial (V_dip² = 140 cm^-2; κ² = 0.08) and the peripheral (V_dip² = 724 cm^-2; κ² = 1.46) arrangements, we establish that this rate acceleration is due to a more favorable (nearly co-planar) relative orientation of the transition dipole moments of the subphthalocyanine and pentacenes in the peripheral constellation.

Probing Through-Bond and Through-Space Interactions in Singlet Fission-Based Pentacene Dimers

Interchromophoric interactions such as Coulombic coupling and exchange interactions are crucial to the functional properties of numerous π-conjugated systems. Here, we use magnetic circular dichroism (MCD) spectroscopy to investigate interchromophoric interactions in singlet fission relevant pentacene dimers. Using a simple analytical model, we outline a general relationship between the geometry of pentacene dimers and their calculated MCD response. We analyze experimental MCD spectra of different covalently bridged pentacene dimers to reveal how the molecular structure of the "bridge" affects the magnitude of through-space Coulombic and through-bond exchange interactions in the system. Our results show that through-bond interactions are significant in dimers with conjugated molecules as bridging units and these interactions promote the overall electronic coupling in the system. Our generalized approach paves the way for the application of MCD in investigating interchromophoric interactions across a range of π-conjugated systems.

Excimer evolution hampers symmetry-broken charge-separated states

Achieving long-lived symmetry-broken charge-separated states in chromophoric assemblies is quintessential for enhanced performance of artificial photosynthetic mimics. However, the occurrence of energy trap states hinders exciton and charge transport across photovoltaic devices, diminishing power conversion efficiency. Herein, we demonstrate unprecedented excimer formation in the relaxed excited-state geometry of bichromophoric systems impeding the lifetime of symmetry-broken charge-separated states. Core-annulated perylenediimide dimers (SC-SPDI2 and SC-NPDI2) prefer a near-orthogonal arrangement in the ground state and a π-stacked foldamer structure in the excited state. The prospect of an excimer-like state in the foldameric arrangement of SC-SPDI2 and SC-NPDI2 has been rationalized by fragment-based excited state analysis and temperature-dependent photoluminescence measurements. Effective electronic coupling matrix elements in the Franck-Condon geometry of SC-SPDI2 and SC-NPDI2 facilitate solvation-assisted ultrafast symmetry-breaking charge-separation (SB-CS) in a high dielectric environment, in contrast to unrelaxed excimer formation (Ex*) in a low dielectric environment. Subsequently, the SB-CS state dissociates into an undesired relaxed excimer state (Ex) due to configuration mixing of a Frenkel exciton (FE) and charge-separated state in the foldamer structure, downgrading the efficacy of the charge-separated state. The decay rate constant of the FE to SB-CS (k FE→SB-CS) in polar solvents is 8-17 fold faster than that of direct Ex* formation (k FE→Ex*) in non-polar solvent (k FE→SB-CS≫k FE→Ex*), characterized by femtosecond transient absorption (fsTA) spectroscopy. The present investigation establishes the impact of detrimental excimer formation on the persistence of the SB-CS state in chromophoric dimers and offers the requisite of conformational rigidity as one of the potential design principles for developing advanced molecular photovoltaics.

Parallel triplet formation pathways in a singlet fission material

Harvesting long-lived free triplets in high yields by utilizing organic singlet fission materials can be the cornerstone for increasing photovoltaic efficiencies potentially. However, except for polyacenes, which are the most studied systems in the singlet fission field, spin-entangled correlated triplet pairs and free triplets born through singlet fission are relatively poorly characterized. By utilizing transient absorption and photoluminescence spectroscopy in supramolecular aggregate thin films consisting of Hamilton-receptor-substituted diketopyrrolopyrrole derivatives, we show that photoexcitation gives rise to the formation of spin-0 correlated triplet pair ¹(TT) from the lower Frenkel exciton state. The existence of ¹(TT) is proved through faint Herzberg-Teller emission that is enabled by vibronic coupling and correlated with an artifact-free triplet-state photoinduced absorption in the near-infrared. Surprisingly, transient electron paramagnetic resonance reveals that long-lived triplets are produced through classical intersystem crossing instead of ¹(TT) dissociation, with the two pathways in competition. Moreover, comparison of the triplet-formation dynamics in J-like and H-like thin films with the same energetics reveals that spin-orbit coupling mediated intersystem crossing persists in both. However, ¹(TT) only forms in the J-like film, pinpointing the huge impact of intermolecular coupling geometry on singlet fission dynamics.

Parallel versus Twisted Pentacenes: Conformational Impact on Singlet Fission

We placed two pentacene chromophores at the termini of a diacetylene linker to investigate the impact of excitation wavelength, conformational flexibility, and vibronic coupling on singlet fission. Photoexcitation of the low-energy absorption results in a superposed mixture of states, which transform on an ultrafast time-scale into a spin-correlated and vibronically coupled/hot delocalized triplet pair 1(T1T1)deloc. Regardless of temperature, the lifetime for 1(T1T1)deloc is less than 2 ps. In contrast, photoexcitation of the high-energy absorption results in the formation of 1(T1T1)deloc lasting 1.0 ps, which then decays at room temperature within 4 ps via triplet-triplet annihilation. Lowering the temperature enables 1(T1T1)deloc to delocalize and vibronically decouple, in turn affording 1(T1T1)loc. In addition, our results suggest that the quasi-free rotation at the diacetylene spacer may lead to twisted conformations with very low SF quantum yields, highlighting the need of controlling this structural aspect in the design of new singlet fission active molecules.

Molecular rotational conformation controls the rate of singlet fission and triplet decay in pentacene dimers

Three pentacene dimers have been synthesized to investigate the effect of molecular rotation and rotational conformations on singlet fission (SF). In all three dimers, the pentacene units are linked by a 1,4-diethynylphenylene spacer that provides almost unimpeded rotational freedom between the pentacene- and phenylene-subunits in the parent dimer. Substituents on the phenylene spacer add varying degrees of steric hindrance that restricts both the rotation and the equilibrium distribution of different conformers; the less restricted conformers exhibit faster SF and more rapid subsequent triplet-pair recombination. Furthermore, the rotational conformers have small shifts in their absorption spectra and this feature has been used to selectively excite different conformers and study the resulting SF. Femtosecond transient absorption studies at 100 K reveal that the same dimer can have orders of magnitude faster SF in a strongly coupled conformer compared to a more weakly coupled one. Measurements in polystyrene further show that the SF rate is nearly independent of viscosity whereas the triplet pair lifetime is considerably longer in a high viscosity medium. The results provide insight into design criteria for maintaining high initial SF rate while suppressing triplet recombination in intramolecular singlet fission.

In this study we show that one molecule can have vastly different singlet fission and triplet recombination rates depending on its rotational freedom and the relative orientation of the pentacene moieties.

Excimer Formation Inhibits the Intramolecular Singlet Fission Dynamics: Systematic Tilting of Pentacene Dimers by Linking Positions

The role of excimer formation in inhibiting or enhancing the efficiency of the intramolecular singlet fission (iSF) process has been a subject of recent debate. Here, we investigated the effect of excimer formation on iSF dynamics by modifying its configuration by connecting pentacenes at various positions. Hence, pentacene dimers having slip-stacked (2,2' BP, J-type), oblique (2,6' BP), and facial (6,6' BP, H-type) configurations were synthesized by covalently linking pentacenes at positions 2,2', 2,6', and 6,6', respectively, with an ethynyl bridge, and their ultrafast excited-state relaxation dynamics were characterized. Femtosecond time-resolved transient absorption spectra revealed that the efficiency of iSF dynamics decreased from slip-stacked (182%) to oblique configuration (97%),whereas in the 6,6' BP with facial configuration, strong electronic coupling led to the formation of excimers that decayed nonradiatively without formation of correlated triplet pairs. These studies reveal the formation of excimers by strong intrapentacene electronic coupling upon ultrafast excitation, preventing the efficient iSF process.

Emergence of practical fluorescence in a confined space of nanoporous silica: significantly enhanced quantum yields of a conjugated molecule

The fluorescence of benzanthrone, which is a conjugated molecule bearing a carbonyl group, is activated by confinement in a pore with a diameter close to the molecular size. An intense emission originating from the aromatic character π-π* transition is achieved through suppression of the nonradiative n-π* transition by strong hydrogen bonding between carbonyl groups and silanol groups with a micropore-filling effect in the nanospace.

Induced axial chirality by a tight belt: naphthalene chromophores fixed in a 2,5-substituted cofacial para-phenylene-ethynylene framework

We report the design of a synthetically easy accessible axial chirality-inducing framework for a chromophore of choice. The scaffold consists of two basic para-phenylene-ethynylene backbones separated by laterally placed corner units. Substitution with an inherently achiral chromophore at the 2 and 5 positions of the central phenylene excitonically couples the chromophore associated transition and thereby results in chiroptical properties. Using 6-methoxynaphthalene as a model chromophore, we present the synthesis, structural analysis and spectroscopic investigation of the framework. The chiral framework was synthesized in three straightforward synthetic steps and fully characterized. The obtained racemic compounds were resolved using HPLC and assignment of the absolute configuration was performed using the exciton chirality method, crystallography and DFT calculations. This simple yet potent framework might prove useful to enrich the structural diversity of chiral materials.

Pentacene-Bridge Interactions in an Axially Chiral Binaphthyl Pentacene Dimer

Molecular chirality can be exploited as a sensitive reporter of the nature of intra- and interchromophore interactions in π-conjugated systems. In this report, we designed an intramolecular singlet fission (iSF)-based pentacene dimer with an axially chiral binaphthyl bridge (2,2'-(2,2'-dimethoxy-[1,1'-binaphthalene]-3,3'-diyl) n-octyl-di-isopropyl silylethynyl dipentacene, BNBP) to utilize its chiroptical response as a marker of iSF chromophore-bridge-chromophore (SFC-β-SFC) interactions. The axial chirality of the bridge enforces significant one-handed excitonic coupling of the pentacene monomer units; as such, BNBP exhibits significant chiroptical response in the ground and excited states. We analyzed the chiroptical response of BNBP using the exciton coupling method and quadratic response density functional theory calculations to reveal that higher energy singlet transitions in BNBP involve significant delocalization of the electronic density on the bridging binaphthyl group. Our results highlight the promising application of chiroptical techniques to investigate the nature of SFC-β-SFC interactions that impact singlet fission dynamics.

Acene-Linked Zethrenes and Bisphenalenyls: A DFT Search for Organic Tetraradicals

Polycyclic aromatic hydrocarbons are of special interest due to their promising nonlinear optical and magnetic properties. A series of acene-linked zethrenes and bisphenalenyls comprising from five to nine benzene rings in the linker group have been computationally studied by the DFT UB3LYP/6-311++G(d,p) quantum-chemical modeling of their electronic structure, possible spin states, and exchange interactions. The zethrenes with octacene and nonacene linkers as well as bisphenalenyls comprising heptacene, octacene, and nonacene linker groups have been revealed to possess tetraradicaloid nature, which makes them promising building blocks for organic optoelectronic and spintronic devices. The results obtained open a way of constructing tetraradicaloid organic molecules characterized by the presence of two types of paramagnetic centers.

Hysteretic Three-State Redox Interconversion among Zigzag Bisquinodimethanes with Non-fused Benzene Rings and Twisted Tetra-/Dications with [5]/[3]Acenes Exhibiting Near-Infrared Absorptions

Octaaryl-substituted bisquinodimethanes (BQDs) with a zigzag structure were designed as redox-switchable molecules that undergo four-electron oxidation to produce tetracationic pentacenes with a doubly twisted structure. In contrast to one-stage four-electron oxidation of BQDs, stepwise two-electron reduction of tetracationic pentacenes occurs to give dicationic anthracenes and then the original BQDs, step-by-step. Since both tetracations and dications exhibit near-infrared (NIR) absorptions (-1400 nm) based on an intramolecular charge-transfer interaction, changes in not only their structures but also their UV-vis-NIR spectra can be controlled by redox stimuli. In this Communication, we present an unprecedented one-step π-extension to pentacene from non-fused benzene rings by oxidation, and subsequent two-stage deannulation to benzene rings via anthracene upon reduction. All structures were determined by single-crystal X-ray analyses, and their properties were characterized by spectroscopic and theoretical studies.

Singlet Fission in a Flexible Bichromophore with Structural and Dynamic Control

Singlet fission (SF), i.e., the splitting of a high-energy exciton into two lower-energy triplet excitons, has the potential to increase the efficiency for harvesting spectrally broad light. The path from the photopopulated singlet state to free triplets is complicated by competing processes that decrease the overall SF efficiency. A detailed understanding of the whole cascade and the nature of the photoexcited singlet state is still a major challenge. Here, we introduce a pentacene dimer with a flexible crown ether spacer enabling a control of the interchromophore coupling upon solvent-induced self-aggregation as well as cation binding. The systematic change of solvent polarity and viscosity and excitation wavelength, as well as the available conformational phase space, allows us to draw a coherent picture of the whole SF cascade from the femtosecond to microsecond time scales. High coupling leads to ultrafast SF (<2 ps), independent of the solvent polarity, and to highly coupled correlated triplet pairs. The absence of a polarity effect indicates that the solvent coordinate does not play a significant role and that SF is driven by intramolecular modes. Low coupling results in much slower SF (∼500 ps), which depends on viscosity, and leads to weakly coupled correlated triplet pairs. These two triplet pairs could be spectrally distinguished and their contribution to the overall SF efficiency, i.e., to the population of free triplets, could be determined. Our results reveal how the overall SF efficiency can be increased by conformational restrictions and control of the structural fluctuation dynamics.

Room-Temperature Pentacene Fluids: Oligoethylene Glycol Substituent-Controlled Morphologies and Singlet Fission

We report the first synthesis of solvent-free pentacene fluids at room temperature together with observation of singlet fission (SF). Three pentacenes with different number of ethylene glycol (EG) side chains (n) were employed (denoted as (EG)_n-Pc-(EG)_n: n = 2, 3, and 4). The morphologies of these pentacenes largely depend on the lengths of EG chains (n). (EG)₃-Pc-(EG)₃ and (EG)₄-Pc-(EG)₄ indicate fluid compounds at room temperature, whereas (EG)₂-Pc-(EG)₂ is a solid compound. Microscopic clustering with short-range interactions between pentacene chromophores was confirmed in X-ray diffraction profiles of solvent-free fluids. Such a structural trend is an important origin of SF and consistent with the steady-state spectroscopic results. To one's surprise, femtosecond transient absorption spectroscopy demonstrated that SF occurred in thin films prepared from solvent-free fluids of (EG)₃-Pc-(EG)₃ and (EG)₄-Pc-(EG)₄ in spite of such excessive EG chains.

Planarity and Length of the Bridge Control Rate and Efficiency of Intramolecular Singlet Fission in Pentacene Dimers

Singlet fission (SF) improves the power conversion efficiency of optoelectronic devices by converting high-energy photons into two triplet excitons. SF dynamics and efficiency (Φ) are controlled by various factors. Here, the effect of planarity and length of the bridge in pentacene dimers on the intramolecular SF (iSF) process was investigated by synthesizing the dimers connected by bridges having fluorene (FL-PD, planar), methyl-substituted biphenyl (MBP-PD, twisted), and diphenyl acetylene (DPA-PD, longer) groups and characterizing their excited-state relaxation dynamics using nanosecond and femtosecond pump-probe spectroscopy. Transient absorption studies reveal that iSF dynamics of FL-PD having a planar bridge are ∼787 times faster (187 ps) and exhibit higher Φ (198%) by feasible electronic coupling, compared to MBP-PD possessing a twisted bridge showing a low Φ of ∼16%. However compared to FL-PD, iSF dynamics of DPA-PD with an increase of bridge length are slower by an order (1.09 ns) and show comparable Φ of 185% through extended conjugation. Thus, the planarity and length of the bridge in pentacene dimers control the rate and efficiency of the iSF process.

Controlling Singlet Fission with Coordination Chemistry-Induced Assembly of Dipyridyl Pyrrole Bipentacenes

Singlet fission has the potential to surpass current efficiency limits in next-generation photovoltaics and to find use in quantum information science. Despite the demonstration of singlet fission in various materials, there is still a great need for fundamental design principles that allow for tuning of photophysical parameters, including the rate of fission and triplet lifetimes. Here, we describe the synthesis and photophysical characterization of a novel bipentacene dipyridyl pyrrole (HDPP-Pent) and its Li- and K-coordinated derivatives. HDPP-Pent undergoes singlet fission at roughly 50% efficiency (τSF = 730 ps), whereas coordination in the Li complex induces significant structural changes to generate a dimer, resulting in a 7-fold rate increase (τSF = 100 ps) and more efficient singlet fission with virtually no sacrifice in triplet lifetime. We thus illustrate novel design principles to produce favorable singlet fission properties, wherein through-space control can be achieved via coordination chemistry-induced multipentacene assembly.

Singlet Heterofission in Tetracene-Pentacene Thin-Film Blends

Heterofission is a photophysical process of fundamental and applied interest whereby an excited singlet state is converted into two triplets on chemically distinct chromophores. The potential of this process lies in the tuning of both the optical band gap and the splitting between singlet and triplet energies. Herein, we report the time‐domain observation of heterofission in mixed thin films of the prototypical singlet fission chromophores pentacene and tetracene using excitation wavelengths above and below the tetracene band gap. We found a time constant of 26 ps for endothermic heterofission of a singlet exciton on pentacene in blends with low pentacene fractions, which was outcompeted by pentacene homofission for increasing pentacene concentrations. Direct excitation of tetracene lead to fast energy transfer to pentacene and subsequent singlet fission, which prevented homo‐ or heterofission of a singlet exciton on tetracene.

Supramolecular optimization of the visual contrast for colorimetric indicator assays that release resorufin dye

A tetralactam macrocycle acts as a novel supramolecular adjuvant to capture a released resorufin dye and create a higher contrasting yellow/blue color change for enhanced naked eye interpretation of a colorimetric indicator assay.

Anthracene-Pentacene Dyads: Synthesis and OFET Characterization

The synthesis of a series of unsymmetrical derivatives of pentacene appended with functionalized anthracene moieties is reported. These anthracene-pentacene dyads have been characterized by UV-vis spectroscopy and cyclic voltammetry to examine their electronic properties. X-ray crystallographic analysis was used to examine the solid-state features of anthracene-pentacene dyads 1 a-d with H-, F-, Cl-, and Br- substituents on the 9-position of anthracene, and shows that the packing arrangement of anthracene-pentacene derivatives 1 b,d,e are remarkably similar irrespective of the presence of fluoride, bromide or methyl substituents. The pentacene-anthracene dyads have been incorporated into OTFTs to evaluate their semiconducting properties. The pentacene derivative 1 b shows ambipolar behavior using AlO_x C₁₄ PA as the gate dielectric (electron and hole mobilities of 7.6 ⋅ 10^-3 and 1.6 ⋅ 10^-1  cm²  V^-1  s^-1 ), while performance of all derivatives was poor using p-doped Silicon as the substrate. These studies highlight the importance of thin-film formation over molecular structure.

Singlet Fission in Carbene-Derived Diradicaloids

Herein, we present a new class of singlet fission (SF) materials based on diradicaloids of carbene scaffolds, namely cyclic (alkyl)(amino)carbenes (CAACs). Our modular approach allows the tuning of two key SF criteria: the steric factor and the diradical character. In turn, we modified the energy landscapes of excited states in a systematic manner to accommodate the needs for SF. We report the first example of intermolecular SF in solution by dimer self-assembly at cryogenic temperatures.

Lessons from intramolecular singlet fission with covalently bound chromophores

Molecular dimers, oligomers, and polymers are versatile components in photophysical and optoelectronic architectures that could impact a variety of applications. We present a perspective on such systems in the field of singlet fission, which effectively multiplies excitons and produces a unique excited state species, the triplet pair. The choice of chromophore and the nature of the attachment between units, both geometrical and chemical, play a defining role in the dynamical scheme that evolves upon photoexcitation. Specific final outcomes (e.g., separated and uncorrelated triplet pairs) are being sought through rational design of covalently bound chromophore architectures built with guidance from recent fundamental studies that correlate structure with excited state population flow kinetics.

Relation between molecular packing and singlet fission in thin films of brominated perylenediimides

Perylene diimides (PDIs) are attractive chromophores that exhibit singlet exciton fission (SF) and have several advantages over traditional SF molecules such as tetracene and pentacene; however, their photophysical properties relating to SF have received only limited attention. In this study, we explore how introduction of bulky bromine atoms in the so-called bay-area PDIs, resulting in a nonplanar structure, affects the solid-state packing and efficiency of singlet fission. We found that changes in the molecular packing have a strong effect on the temperature dependent photoluminescence, expressed as an activation energy. These effects are explained in terms of excimer formation for PDIs without bay-area substitution, which competes with singlet fission. Introduction of bromine atoms in the bay-positions strongly disrupts the solid-state packing leading to strongly reduced excitonic interactions. Surprisingly, these relatively amorphous materials with weak electronic coupling exhibit stronger formation of triplet excited states by SF because the competing excimer formation is suppressed here.

Synthesis of Unsymmetrical Derivatives of Pentacene for Materials Applications

Pentacene shows unique electronic properties that have long been appreciated and exploited. Over the past 20 years, new synthetic schemes have been developed to address some of the problems encountered with pristine pentacene (e.g., stability and solubility), and pentacene derivatives have become a mainstay in the realm of organic semiconductors in applications such as organic light-emitting diodes, organic field-effect transistors (OFETs), and organic photovoltaics. At the onset of our work, the vast majority of known pentacene derivatives featured a symmetrical structure, often as the result of synthetic protocols that rely on nucleophilic additions to 6,13-pentacenequinone (PQ). The assembly of pentacenes featuring an unsymmetrical framework held great appeal, but the stepwise formation of derivatives, in which a specific function might be incorporated through each individual addition step, did not exist. This Account presents contributions from our lab and others to the synthesis and study of unsymmetrical pentacene derivatives. PQ offers an ideal platform for desymmetrization through the sequential addition of nucleophiles to each of the two ketone groups. Addition can be completed in a one-pot protocol, or through individual steps in which the product of the first addition is isolated and used as a precursor in the divergent synthesis of a series of structurally related molecules. This general approach has been used to assemble pentacene derivatives appended with alkynyl/aryl/alkyl groups, polarized frameworks via substitution with donor and/or acceptor groups, and conjugated oligomers linked by butadiynyl moieties. Stepwise substitution also provides derivatives with remarkable functionality, including pentacene-porphyrin dyads, pendent TEMPO free radicals, cyanoacrylic acid anchor groups (for incorporation into dye-sensitized solar cells), and derivatives with ambipolar behavior for OFET devices. The study of intramolecular singlet fission (iSF) has emerged as one of the most fruitful applications of unsymmetrical pentacene derivatives. SF involves the spontaneous splitting of a photoexcited singlet state (S₁) in one chromophore into a pair of triplets (T₁) shared with a neighboring chromophore. Pentacene derivatives are particularly well suited for this since E(S₁) ≥ 2E(T₁) satisfies the thermodynamic requirements for SF, and they have the additional feature that two chromophores can be tethered together by a "spacer" that allows spectroscopic studies of iSF to be done in dilute solution. From a synthetic perspective, the major advantage of the dimeric structure is the ability to modify the spacer, which allows for control over the distance, geometric relationship, and electronic coupling between the two pentacene groups. Dimeric pentacenes are central to providing an in-depth understanding of the molecular mechanism of SF, often providing advances not possible from measurements in the solid state.