Adsorption processes on a Pd monolayer-modified Pt(111) electrode

Deconvolution of the Voltammetric Features of a Pt(100) Single-Crystal Electrode

The Pt(100) single-crystal electrode shows four voltammetric features in acid electrolytes, but the precise corresponding surface phenomena remain unresolved. Herein, a deconvolution of the classical "hydrogen region" from the "hydroxyl and anion region" is attempted by the comparison of voltammetric behavior of Pt(100) and GMLPt(100) electrodes. A systematic study performed on Pt(s)-[n(100) × (111)] and Pt(s)-[n(100) × (110)] electrodes reveals that the feature at EPI = 0.30 VRHE corresponds to pure hydrogen adsorption taking place at (111) step sites vicinal to (100) domains, while the peak at EPII = 0.36 VRHE actually involves hydroxyl replacing hydrogen at (100) domains. An analysis examined for H2SO4, HClO4, CH3SO3H, and HF demonstrates that the specific (H)SO4- adsorption commences at EPIII = 0.40 VRHE and effectively suppresses the formation of hydroxyl at the (100) terrace at higher potentials 0.40 < EPIV < 0.75 VRHE. Non-specifically adsorbing anions (ClO4-, CH3SO3- and F-) would only interact with the hydroxyl phase formed on the Pt(100) terrace in both potential regions.

Boosting Formate Electrooxidation by Heterostructured PtPd Alloy and Oxides Nanowires

Direct formate fuel cells (DFFCs) receive increasing attention as promising technologies for the future energy mix and environmental sustainability, as formate can be made from carbon dioxide utilization and is carbon neutral. Herein, heterostructured platinum-palladium alloy and oxides nanowires (PtPd-ox NWs) with abundant defect sites are synthesized through a facile self-template method and demonstrated high activity toward formate electrooxidation reaction (FOR). The electronic tuning arising from the heterojunction between alloy and oxides influence the work function of PtPd-ox NWs. The sample with optimal work function reveals the favorable adsorption behavior for intermediates and strong interaction in the d-p orbital hybridization between Pt site and oxygen in formate, favoring the FOR direct pathway with a low energy barrier. Besides the thermodynamic regulation, the heterostructure can also provide sufficient hydroxyl species to facilitate the formation of carbon dioxide due to the ability of combining absorbed hydrogen and carbon monoxide at adjacent active sites, which contributes to the improvement of FOR kinetics on PtPd-ox NWs. Thus, heterostructured PtPd-ox NWs achieve dual regulation of FOR thermodynamics and kinetics, exhibiting remarkable performance and demonstrating potential in practical systems.

Subsurface Hydride Formation Leads to Slow Surface Adsorption Processes on a Pd(111) Single-Crystal Electrode in Acidic Electrolytes

Palladium is one of the most important catalysts due to its widespread use in heterogeneous catalysis and electrochemistry. However, an understanding of the electrochemical processes and interfacial phenomena at Pd single-crystal electrodes/electrolytes is still scarce. In this work, the electrochemical behavior of the Pd(111) electrode was studied by the combination of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in different acidic electrolytes, namely, sulfuric acid, perchlorate acid, methane sulfonic acid, and hydrofluoric acid. An analysis of CV profiles shows the strong adsorption of all anions at low electrode potential, partially overlapping with underpotential deposited hydrogen (UPD-H), leading to the appearance of a pair of sharp peaks in what would be considered the "hydrogen region". All anions studied (HSO4-, ClO4-, CH3SO3-, and F-) adsorb specifically and interact with (or effectively block) the surface-adsorbed hydroxyl phase formed on the Pd(111) terrace at higher potentials. Strikingly, the scan rate-dependent results show that the process of anion adsorption and desorption is a kinetically rather slow step. EIS measurements show that the exact mechanism of this slow anion ad/desorption process actually stems from (sub)surface phenomena: the direct hydrogen insertion into Pd lattice (hydrogen subsurface absorption) commences from ca. 0.40 V and leads to the formation of (subsurface) Pd hydrides (PdHx). We argue that the subsurface hydrogen phase significantly alters the work function and thereby the kinetics of the anion adsorption and desorption processes, leading to irreversible peaks in the voltammetry. This precise understanding is important in guiding further fundamental work on Pd single crystals and will be crucial to advancing the eventual design of optimized Pd electrocatalysts.

Influence of Cations on HCOOH and CO Formation during CO2 Reduction on a PdMLPt(111) Electrode

Understanding the role of cations in the electrochemical CO2 reduction (CO2RR) process is of fundamental importance for practical application. In this work, we investigate how cations influence HCOOH and CO formation on PdMLPt(111) in pH 3 electrolytes. While only (a small amount of adsorbed) CO forms on PdMLPt(111) in the absence of metal cations, the onset potential of HCOOH and CO decreases with increasing cation concentrations. The cation effect is stronger on HCOOH formation than that on CO formation on PdMLPt(111). Density functional theory simulations indicate that cations facilitate both hydride formation and CO2 activation by polarizing the electronic density at the surface and stabilizing *CO2-. Although the upshift of the metal work function caused by high coverage of adsorbates limits hydride formation, the cation-induced electric field counterbalances this effect in the case of *H species, sustaining HCOOH production at mild negative potentials. Instead, at the high *CO coverages observed at very negative potentials, surface hydrides do not form, preventing the HCOOH route both in the absence and presence of cations. Our results open the way for a consistent evaluation of cationic electrolyte effects on both activity and selectivity in CO2RR on Pd-Pt catalysts.

Promote electroreduction of CO2 via catalyst valence state manipulation by surface-capping ligand

Electrochemical CO2 reduction provides a potential means for synthesizing value-added chemicals over the near equilibrium potential regime, i.e., formate production on Pd-based catalysts. However, the activity of Pd catalysts has been largely plagued by the potential-depended deactivation pathways (e.g., [Formula: see text]-PdH to [Formula: see text]-PdH phase transition, CO poisoning), limiting the formate production to a narrow potential window of 0 V to -0.25 V vs. reversible hydrogen electrode (RHE). Herein, we discovered that the Pd surface capped with polyvinylpyrrolidone (PVP) ligand exhibits effective resistance to the potential-depended deactivations and can catalyze formate production at a much extended potential window (beyond -0.7 V vs. RHE) with significantly improved activity (~14-times enhancement at -0.4 V vs. RHE) compared to that of the pristine Pd surface. Combined results from physical and electrochemical characterizations, kinetic analysis, and first-principle simulations suggest that the PVP capping ligand can effectively stabilize the high-valence-state Pd species (Pdδ+) resulted from the catalyst synthesis and pretreatments, and these Pdδ+ species are responsible for the inhibited phase transition from [Formula: see text]-PdH to [Formula: see text]-PdH, and the suppression of CO and H2 formation. The present study confers a desired catalyst design principle, introducing positive charges into Pd-based electrocatalyst to enable efficient and stable CO2 to formate conversion.

Using Palladium and Gold Palladium Nanoparticles Decorated with Molybdenum Oxide for Versatile Hydrogen Peroxide Electroproduction on Graphene Nanoribbons

Electrocatalytic production of H₂O₂ via a two-electron oxygen reduction reaction (ORR-2e^-) is regarded as a highly promising decentralized and environmentally friendly mechanism for the production of this important chemical commodity. However, the underlying challenges related to the development of catalytic materials that contain zero or low content of noble metals and that are relatively more active, selective, and resistant for long-term use have become a huge obstacle for the electroproduction of H₂O₂ on commercial and industrial scales. The present study reports the synthesis and characterization of low metal-loaded (≤6.4 wt %) catalysts and their efficiency in H₂O₂ electroproduction. The catalysts were constructed using gold palladium molybdenum oxide (AuPdMoO_x) and palladium molybdenum oxide (PdMoO_x) nanoparticles supported on graphene nanoribbons. Based on the application of a rotating ring-disk electrode, we conducted a thorough comparative analysis of the electrocatalytic performance of the catalysts in the ORR under acidic and alkaline media. The proposed catalysts exhibited high catalytic activity (ca. 0.08 mA g_noble metal^-1 in an acidic medium and ca. 6.6 mA g_noble metal^-1 in an alkaline medium), good selectivity (over 80%), and improved long-term stability toward ORR-2e^-. The results obtained showed that the enhanced ORR activity presented by the catalysts, which occurred preferentially via the two-electron pathway, was promoted by a combination of factors including geometry, Pd content, interparticle distance, and site-blocking effects, while the electrochemical stability of the catalysts may have been enhanced by the presence of MoO_x.

How palladium inhibits CO poisoning during electrocatalytic formic acid oxidation and carbon dioxide reduction

Development of reversible and stable catalysts for the electrochemical reduction of CO₂ is of great interest. Here, we elucidate the atomistic details of how a palladium electrocatalyst inhibits CO poisoning during both formic acid oxidation to carbon dioxide and carbon dioxide reduction to formic acid. We compare results obtained with a platinum single-crystal electrode modified with and without a single monolayer of palladium. We combine (high-scan-rate) cyclic voltammetry with density functional theory to explain the absence of CO poisoning on the palladium-modified electrode. We show how the high formate coverage on the palladium-modified electrode protects the surface from poisoning during formic acid oxidation, and how the adsorption of CO precursor dictates the delayed poisoning during CO₂ reduction. The nature of the hydrogen adsorbed on the palladium-modified electrode is considerably different from platinum, supporting a model to explain the reversibility of this reaction. Our results help in designing catalysts for which CO poisoning needs to be avoided.

Hydrogen Evolution and Oxygen Reduction Reactions in Acidic Media Catalyzed by Pd4 S Decorated N/S Doped Carbon Derived from Pd Coordination Polymer

The template-free synthesis and the characterization of an active electrocatalyst are performed for both the hydrogen evolution and oxygen reduction reactions in acidic media. In this work, the unique chelation mode of benzene-1,4-dithiocarboxamide (BDCA) is first used to synthesize a novel palladium-BDCA coordination polymer (PdBDCA) as a precursor of palladium sulfide nanoparticles-decorated nitrogen and sulfur doped carbon (Pd₄ S-SNC). The newly synthesized PdBDCA and Pd₄ S-SNC nanoparticles are characterized using chemical, electrochemical, and surface analysis methods. Notably, the nanoparticles obtained at 700 °C exhibit the remarkable catalytic property for the hydrogen evolution reaction in 0.5 m H₂ SO₄ , showing the overpotential of 32 mV (vs reversible hydrogen electrode (RHE)) and Tafel slope of 52 mV dec^-1 , which are comparable to that of Pt/C. The catalyst also shows a high oxygen reduction activity, offering the half-wave and onset potentials of 0.92 and 0.77 V (vs RHE) in 0.5 m H₂ SO₄ , with improved methanol tolerance and long-term stability compared with Pt/C. The present study gives a way for the design of excellent electrocatalyst for the energy conversion devices in the corrosive acidic environment.

Recent advances in formic acid electro-oxidation: from the fundamental mechanism to electrocatalysts

Direct formic acid fuel cells have attracted significant attention because of their low fuel crossover, high safety, and high theoretical power density among all the proton-exchange membrane fuel cells. Much effort has been devoted to the study of formic acid oxidation, including the reaction processes and electrocatalysts. However, as a model reaction, the anodic electro-oxidation process of formic acid is still not very clear, especially regarding the confirmation of the intermediates, which is not helpful for the design and synthesis of high-performance electrocatalysts for formic acid oxidation or conducive to understanding the reaction mechanisms of other small fuel molecules. Herein, we briefly review the recent advances in investigating the mechanism of formic acid electro-oxidation and the basic design concepts of formic acid oxidation electrocatalysts. Rather than an exhaustive overview of all aspects of this topic, this mini-review mainly outlines the progress of this field in recent years.

Chemisorbed oxygen or surface oxides steer the selectivity in Pd electrocatalytic propene oxidation observed by operando Pd L-edge X-ray absorption spectroscopy

Operando Pd X-ray absorption spectroscopy elucidates how the surface oxygen species steer the selectivity in the electrochemical oxidation of propene.