Responsive morphology transition from micelles to vesicles based on dynamic covalent surfactants

Worm-like Micelle Formation of Sugar-Based Nonionic Surfactant with Multibranched Methyl Chains

The aggregation properties of sugar-based surfactants with methyl groups at multiple positions on the linear alkyl chain are an understudied topic. Therefore, in this study, we performed a structural analysis of aggregates formed by two types of sugar-based nonionic surfactants with multibranched methyl chains, 3,7,11-trimethyldodecyl maltoside (bC15Mal), as well as with a linear chain, dodecyl-β-d-maltoside (C12Mal), in aqueous solutions using rheological and small-angle X-ray scattering techniques. bC15Mal showed an excellent performance in lowering surface tension (28.5 mN m-1), exhibiting efficient adsorption and orientation at the air/water interface. bC15Mal formed rod-like micelles at a concentration of 10 mmol dm-3 in aqueous solutions and transitioned to worm-like micelles at 50 mmol dm-3, followed by gel solutions at 700 mmol dm-3. As the surfactant concentration increased, the length of the worm-like micelles decreased, and the mesh size decreased, indicating that the strings were densely packed. Conversely, C12Mal formed ellipsoidal micelles over a wide range of concentrations from 50 to 700 mmol dm-3. The major axis of the core and the overall axis of the ellipsoidal micelles decreased with increasing concentrations. Thus, it was clear that the introduction of methyl groups at positions 3, 7, and 11 of the dodecyl chain of the sugar-based surfactant resulted in a unique aggregation behavior, that is, the formation of aggregates with high-order structures at low concentrations.

Dynamic covalent surfactants and their uses in the development of smart materials

Dynamic covalent chemistry, which leverages the dynamic nature of reversible covalent bonds controlled by the conditions of reaction equilibrium, has demonstrated great potential in diverse applications related to both the stability of covalent bonds and the possibility of exchanging building blocks, imparting to the systems the possibility of "error checking" and "proof-reading". By incorporating dynamic covalent bonds into surfactant molecular architectures, combinatorial libraries of surfactants with bespoke functionalities can be readily fabricated through a facile strategy, with minimum effort in organic synthesis. Consequently, a multidisciplinary field of research involving the creation and application of dynamic covalent surfactants has recently emerged, which has aroused great attention in surfactant and colloid science, supramolecular chemistry, self-assembly, smart materials, drug delivery, and nanotechnology. This review reports results in this field published over recent years, discusses the possibilities presented by dynamic covalent surfactants and their applications in developing smart self-assembled materials, and outlines some future perspectives.

pH and light dual stimuli-responses of mixed system of 2-hydroxyl-propanediyl-α,ω-bis(dimethyldodecyl ammonium bromide) and trans-ortho-hydroxyl cinnamic acid

Stimuli-responsive smart supramolecular self-assembly with controllable morphology and adjustable rheological property has attracted widespread concern of scientists in recent years due to the great potential application in microfluidics, controlled release, biosensors and so on. In this study, a pH and UV light dual stimuli-responsive system was constructed by combining Gemini surfactant 2-hydroxyl-propanediyl-α,ω-bis(dimethyldodecyl ammonium bromide) (12-3(OH)-12·2Br^-) with trans-ortho-hydroxyl cinnamic acid (trans-OHCA) in aqueous solution. The phase behavior and stimuli-responsive behavior of the system including the microstructural transition, rheological property, intermolecular interaction, and isomerization reaction were explored by various experiment techniques such as rheometer, UV-vis spectrum, polarized optical microscopy (POM), transmission electron microscopy (TEM), dynamic light scattering (DLS) as well as theoretical calculation. The system displays abundant phase behaviors that supramolecular self-assemblies of different morphologies in different states such as spherical micelle, wormlike micelle, lamellar liquid crystal, and aqueous two phase system (ATPS) were observed even at lower concentration, which provide the research basis on the abundant stimuli-responsiveness of the system. The results prove that the multiple ionization and the photo-isomerization of trans-OHCA endow the system with plentiful responses to pH and UV light stimuli. It is expected that this study on the dual stimuli-responsive system with abundant self-assembly behaviors and adjustable rheological behaviors would be of theoretical and practical importance, which would provide essential guidance in designing and constructing smart materials with multiple stimuli-responses.

Base-triggerable lauryl sarcosinate-dodecyl sulfate catanionic liposomes: structure, biophysical characterization, and drug entrapment/release studies

Equimolar mixtures of oppositely charged single-chain amphiphiles form a variety of phases, including vesicles. Such catanionic mixed lipid systems show high stability and exhibit versatile physicochemical properties. In the present study we have investigated the aggregation behaviour of lauryl sarcosinate hydrochloride (LS·HCl) in aqueous dispersion as well as its interaction with the anionic surfactant sodium dodecyl sulfate (SDS). The CMC of LS·HCl was estimated to be ∼5 mM by isothermal titration calorimetry (ITC) and fluorescence spectroscopy using pyrene as the fluorescent probe. Turbidimetric and ITC studies on the interaction of LS·HCl with SDS demonstrated that the two surfactants form an equimolar catanionic complex. The crystal structure of the lauryl sarcosinate-dodecyl sulfate (LS-DS) complex revealed that the complex is stabilized by classical N-H⋯O as well as C-H⋯O hydrogen bonds, besides the electrostatic attraction between LS (cation) and DS (anion) and dispersion interactions between the hydrocarbon chains. Differential scanning calorimetry studies revealed that the phase transition of the equimolar LS-DS complex is significantly reduced compared to the analogous LG-DS and LA-DS complexes in the fully hydrated state. Dynamic light scattering, atomic force microscopy and transmission electron microscopy studies demonstrated that the LS-DS catanionic complex forms stable medium-sized vesicles (diameter of ∼300-500 nm). In vitro studies with 5-fluorouracil and rhodamine 6G showed efficient entrapment and release of these two anti-cancer drugs in the physiologically relevant pH range of 6.0-8.0, but with contrasting pH dependences. These observations indicate that LS-DS catanionic vesicles may find application in designing drug delivery systems.

Events at the Interface: How Do Interfaces Modulate the Dynamics and Functionalities of Guest Molecules?

Chemical and biological interfaces are of various types, which could be between two materials of the same and/or different states, two phases of the same material, biological substrates and the outer environment, surfactant or polymeric membranes and the bulk, and so forth. Small-molecule guests frequently interact with such interfaces that decide their functionalities. The structural and behavioral properties undergo considerable characteristic changes, which control their final course of action in the targeted application. This Perspective will discuss mainly the chemical interfaces constituted by the surfactants, polymers, lipids, and nucleic acids and their impacts on the dynamics of small-molecule guests. Some specific and interesting phenomena and future prospects will be elucidated in this Perspective.

pH-Induced reversible conversion between non-Pickering and Pickering high internal phase emulsion

Solid-stabilized high internal phase emulsions have received extensive attention. Many previous studies have confirmed that solid emulsifiers in high internal phase Pickering emulsions (HIPPEs) provide a great interface mechanical barrier. With the development of research, novel solid-stabilized emulsions have emerged. These emulsions are stabilized by the electrostatic repulsion between the surfactants and hydrophilic solid particles. They are distinct from Pickering emulsions in that the solid particles do not exist at the oil-water interface, but are dispersed in the continuous phase, so it is called a non-Pickering emulsion. However, high internal phase non-Pickering emulsions (HIPNPEs) are rarely reported. Herein, HIPNPEs that are synergistically stabilized by anionic surfactants with dynamic covalent bonds and negatively charged nano-SiO₂ particles were prepared. In the presence of dodecylamine, the acidity causes the dynamic covalent bonds to break and the surfactant to be inactivated. Additionally, the long-chain amine is protonated and adsorbed on nano-SiO₂ particles to form a new surfactant for stabilizing HIPPEs. However, alkalinity causes the HIPNPEs to form again. In addition, rheological tests confirmed that the HIPNPEs and HIPPEs had similar rheological behaviors, which were typical gel-like fluids. The emulsion can quickly respond to realize the conversion between the different types of high internal phase emulsion by simple stimulation, which provides a new direction for stimulus-responsive high internal phase emulsions.

Advances of supramolecular interaction systems for improved oil recovery (IOR)

Improved oil recovery (IOR) includes enhanced oil recovery (EOR) and other technologies (i.e. fracturing, water injection optimization, etc.), have become important methods to increase the oil/gas production in petroleum industry. However, conventional flooding systems always encounter the problems of low efficiency, high cost and complicated synthetic procedures for harsh reservoirs conditions. In recent decades, the supramolecular interactions are introduced into IOR processes to simplify the synthetic procedures, alter their structures and properties with bespoke functionalities and responsiveness suitable for different conditions. Herein, we primarily review the fundamentals of several supramolecular interactions, including hydrophobic association, hydrogen bond, electrostatic interaction, host-guest recognition, metal-ligand coordination and dynamic covalent bond from intrinsic principles and extrinsic functions. Then, the descriptions of supramolecular interactions in IOR processes from categories and advances are focused on the following variables: polymer, surfactant, surfactant/polymer (SP) complex for EOR and viscoelasticity surfactant (VES) for clean hydraulic fracturing aspects. Finally, the field applications, challenges and prospects for supramolecular interactions in IOR processes are involved and systematically addressed. The development of supramolecular interactions can open the way toward adaptive and evolutive IOR technology, a further step towards the cost-effective production of petroleum industry.

Rational design of dynamic imine surfactants for oil-water emulsions: Learning from oil-induced reversible dynamic imine bond formation

HYPOTHESIS

Dynamic imine surfactants (DIS) can be constructed by the formation of dynamic imine bonds (Dibs) between aromatic aldehydes and aliphatic amines in water. Because of the nature of Dibs in water, a thermodynamic equilibrium state was achieved between the DIS and aldehyde and amine precursors to form a dynamic combinatorial library (DCL). When the DIS served as sole emulsifier to form oil-H₂O emulsions, the precursors migrated between the H₂O phase and the oil phase, which altered the DCL equilibrium. The DIS concentration and emulsion stability also changed.

EXPERIMENTS

By mixing 4-(2-sulfobetaine-ethoxy)-benzaldehyde (SBBA) and aliphatic amines of C_nH_2n+1NH₂ (n = 4, BA; n = 6, HA; n = 8, OA; n = 10, DA) in water, four amphoteric DIS (SBBA-BA/HA/OA/DA) were prepared. Dib formation was characterized using ¹H NMR. The DIS surface activity was studied by surface tension and fluorescence probe methods. The reversible switching of DIS and its wormlike micelles were explored.

FINDINGS

SBBA-OA (or SBBA-DA) DIS was not a suitable emulsifier for stable hydrocarbon (HC)-H₂O emulsions. OA and DA were more soluble in the HC phase than the H₂O phase. The precursors of OA and DA migrated from the H₂O to the HC phase, and the thermodynamic equilibrium state of DCL shifted towards Dib dissociation. The Dib could be regenerated by HC phase removal. A novel strategy where volatile HC (such as pentane) was used as a trigger was developed to switch the DIS reversibly and its self-assemblies (such as wormlike micelles) in water without inorganic salt accumulation. The SBBA-HA (or SBBA-BA) DIS was a suitable emulsifier for stable emulsions because HA and BA were more soluble in the H₂O phase.

pH-responsive pickering foam created from self-aggregate polymer using dynamic covalent bond

HYPOTHESIS

Responsive surfactant systems based on dynamic covalent bond exhibit an unsatisfactory foamability and foam stability, despite their documented functionality in emulsions. As such we anticipate that the foaming performance should be improved by introducing Pickering effect, which is possible when the responsiveness of the dynamic covenant bonds controls not only the hydrophobicity of polymers but also their aggregation behavior (to form nanoparticles).

EXPERIMENTS

Here we created surface active nanoparticles made from self-aggregated polymers consisting of PAH (polyallylamine hydrochloride)-BA (benzaldehyde). The covalent imine bonds between originally hydrophilic PAH and hydrophobic BA are dynamic in that their formation and breakage is a function of solution pH, confirmed by ¹H NMR and dynamic interfacial tension measurement.

FINDINGS

At pH 7.4, a stable foam is achieved in the PAH-BA (amino to aldehyde ratio at 1:0.2) solution; while at pH 2.5, it defoams due to breakage of dynamic bonds corresponding to the measured diminishing surface activity. The reversibility of foaming-defoaming has been demonstrated by alternatively changing pH for multiple cycles, with the foaming performance persistent. The foam stability can be improved by more hydrophobic compounds e.g. at a lower amino to aldehyde ratio or using PAH-cinnamaldehyde (CA). The reversible and responsive foaming demonstrated in a Pickering system provides a new method to create novel foaming systems with properties desirable to many applications.

Self-Assembled Vesicles Formed by Positional Isomers of Sodium Dodecyl Benzene Sulfonate-Based Pseudogemini Surfactants

The construction of pseudogemini surfactants based on noncovalent interactions (such as electrostatic interaction and π-π stacking) was a powerful method to assemble well-defined aggregates in aqueous solution. The mixtures of butane-1,4-bis(methylimidazolium bromide) ([mim-C₄-mim]Br₂) and positional isomers of sodium dodecyl benzene sulfonate (SDBS-0,11 or SDBS-3,8) in a molar ratio of 1:2 were studied to characterize the effect of straight and branched alkyl chains on the aggregation behavior of pseudogemini surfactants. Spontaneous phase transition from micelles to vesicles was formed by these two kinds of complexes. Interestingly, a densely stacked onion-like structure (multilamellar vesicles) with more than one dozen layers was fabricated. The micelle and vesicle phases were characterized in detail by cryogenic transmission electron microscopy, polarized optical microscopy, dynamic light scattering, and rheological measurements. It can be clearly demonstrated that the structure of alkyl chain can significantly influence the surface adsorption, solution self-assembly, and aqueous two-phase system of pseudogemini surfactants. Our work provided a convenient technique to achieve controlled self-assembly by introducing positional isomers of surfactants.

Micellar growth and network formation in acidic solutions of a sulfobetaine zwitterionic surfactant triggered by an inorganic salt

Micellization (formation of wormlike structures) of 3-(N-erucamidopropyl-N,N-dimethyl ammonium)propane sulfonate (EDAS) in the presence of an inorganic salt, iron chloride (FeCl3), in acidic conditions is studied using static and dynamic rheological measurements and small-angle X-ray scattering (SAXS). Infrared spectroscopy, single crystal X-ray, and UV-visible spectroscopy are used to further investigate the mechanisms of viscosity and elasticity and the enhancement and formation of an elastic gel-like solution induced by Fe3+ in HCl. The nature of the interaction is characterized to be hydrogen bonding between the amide groups of EDAS and coordinated water in trans-[FeCl2(H2O)4]Cl structure. Such an interaction masks the repulsion forces between surfactant headgroups. This screening effect results in the formation of longer wormlike micelles in the solution. The chemical structure of FeCl3 in concentrated HCl was predicted in the literature through theoretical and experimental techniques; however, its crystal structure, including the exact geometry (e.g., cis or trans) and the non-coordinated chloride position is reported for the first time in the present study. The findings of this study show the sensitivity of a sulfobetaine zwitterionic surfactant to pH alteration and inorganic salt.

Unprecedented formation of reverse micellar vesicles from psuedopeptidic bottlebrush polymers

Self-assembly of psuedopeptidic polymers to vesicles is reported and the mechanism of this spherical assembly has also been delineated.