Targeted synthesis of a metal-free thiadiazolate based nitrogen and sulfur rich porous organic polymer for an unprecedented hydrogen evolution in the electrochemical water splitting

Water splitting is a long-standing quest to material research for mitigating the global energy crisis. Despite high efficiency shown by several high cost noble metal containing electrocatalysts in the water splitting reaction, scientists are focused on alternate metal-free carbon or polymer based materials with comparable activity to make the process economical. In this article, we have strategically designed a noble metal-free thiadiazole (TDA) and triazine (Trz) linked porous organic polymer (TDA-Trz-POP) having N- and S-rich surface. Powder X-ray diffraction (PXRD), Fourier transform infrared (FT-IR), solid state 13C magic angle spinning nuclear magnetic resonance (MAS-NMR) and X-ray photoelectron spectroscopic (XPS) analyses have been performed to predict its probable framework structure. This scrunch paper type TDA-Trz-POP shows an extravagant potential for the hydrogen evolution reaction (HER) with a low overpotential (129.2 mV w.r.t. RHE for 10 mA cm-2 current density) and low Tafel slope (82.1 mV deg-1). Again, this metal-free catalyst shows oxygen evolution reaction (OER) at 410 mV overpotential w.r.t RHE for 10 mA cm-2 current density with a lower Tafel slope of 104.5 mV deg-1. This bifunctional activity was further tested in two electrodes set-up under different pH conditions. The porosity seems to be a blessing in the electrocatalytic performance of this metal-free electrocatalyst material. Further, the mystery behind the activity of both HER and OER has been resolved through the density functional theory (DFT) analysis. This work provides an insight to the material scientists for low cost, metal-free material design for the efficient water splitting reaction.

Polyaniline as a Nitrogen Source and Lignosulfonate as a Sulphur Source for the Preparation of the Porous Carbon Adsorption of Dyes and Heavy Metal Ions

Using agricultural and forestry wastes as raw materials, adsorbent materials were prepared for dye adsorption in wastewater, which can minimize the environmental load and fully realize sustainability by treating waste with waste. Taking lignosulfonate as a raw material, due to its molecular structure having more reactive groups, it is easy to form composite materials via a chemical oxidation reaction with an aniline monomer. After that, using a sodium lignosulfonate/polyaniline composite as the precursor, the activated high-temperature pyrolysis process is used to prepare porous carbon materials with controllable morphology, structure, oxygen, sulfur, and nitrogen content, which opens up a new way for the preparation of functional carbon materials. When the prepared O-N-S co-doped activated carbon materials (SNC) were used as adsorbents, the adsorption study of cationic dye methylene blue was carried out, and the removal rate of SNC could reach up to 99.53% in a methylene blue solution with an initial concentration of 100 mg/L, which was much higher than that of undoped lignocellulosic carbon materials, and the kinetic model conformed to the pseudo-second-order kinetic model. The adsorption equilibrium amount of NC (lignosulfonate-free) and SNC reached 478.30 mg/g and 509.00 mg/g, respectively, at an initial concentration of 500 mg/L, which was consistent with the Langmuir adsorption isothermal model, and the adsorption of methylene blue on the surface of the carbon material was a monomolecular layer. The adsorption of methylene blue dye on the carbon-based adsorbent was confirmed to be a spontaneous and feasible adsorption process by thermodynamic parameters. Finally, the adsorption of SNC on methylene blue, rhodamine B, Congo red, and methyl orange dyes were compared, and it was found that the material adsorbed cationic dyes better. Furthermore, we also studied the adsorption of SNC on different kinds of heavy metal ions and found that its adsorption selectivity is better for Cr3+ and Pb2+ ions.

One-step synthesis of a benzothiadiazole-based nonbranching functionalized covalent organic framework and its application in efficient removal of Hg2

In recent years, a variety of adsorbents have been developed for Hg2+ removal. However, these adsorbents are unsatisfactory for adsorption due to narrow and irregular pore channels or poor adsorption capacity and low stability. Therefore, it is worth exploring a porous Hg2+ adsorbent material with high adsorption performance and stability. In this study, a benzothiadiazole-based nonbranching functionalized covalent organic framework (COF) material (TPS-COF) by one-step synthesis was reported, which exhibited a high specific surface area of 1564 m2 g-1, high crystallinity and stability attributed to its high conjugated linkage structure of benzothiadiazole. In addition, due to the rich S and N elements of the benzothiadiazole unit, it exhibited excellent adsorption performance on Hg2+, including excellent adsorption amount (1040 mg g-1), high initial adsorption rate (448 mg g-1 min-1) and very short adsorption equilibrium time (10 min), with an efficient removal rate of Hg2+ in the pH range of 2-8. After desorption, the TPS-COF still retained good pore stability, adsorption capacity, and reusability. Such a one-step synthetic unbranched functionalization strategy provides further insights to achieve a good balance between the high crystallinity, functionality and stability of COFs.

Nanoscale designing of metal organic framework moieties as efficient tools for environmental decontamination

Environmental pollutants, being a major and detrimental component of the ecological imbalance, need to be controlled. Serious health issues can get intensified due to contaminants present in the air, water, and soil. Accurate and rapid monitoring of environmental pollutants is imperative for the detoxification of the environment and hence living beings. Metal-organic frameworks (MOFs) are a class of porous and highly diverse adsorbent materials with tunable surface area and diverse functionality. Similarly, the conversion of MOFs into nanoscale regime leads to the formation of nanometal-organic frameworks (NMOFs) with increased selectivity, sensitivity, detection ability, and portability. The present review majorly focuses on a variety of synthetic methods including the ex situ and in situ synthesis of MOF nanocomposites and direct synthesis of NMOFs. Furthermore, a variety of applications such as nanoabsorbent, nanocatalysts, and nanosensors for different dyes, antibiotics, toxic ions, gases, pesticides, etc., are described along with illustrations. An initiative is depicted hereby using nanostructures of MOFs to decontaminate hazardous environmental toxicants.

Selective Styrene Oxidation Catalyzed by Phosphate Modified Mesoporous Titanium Silicate

Selective oxidation of organics over an efficient heterogeneous catalyst under mild liquid phase conditions is a very demanding chemical reaction. Herein, we first report the modification of the surface of mesoporous silica MCM-41 material by phosphate for the efficient incorporation of Ti(IV) in the silica framework to obtain highly ordered 2D hexagonal mesoporous material STP-1. STP-1 has been synthesized by using tetraethyl orthosilicate, triethyl phosphate, and titanium isopropoxide as Si, P, and Ti precursors, respectively, in the presence of cationic surfactant cetyltrimethylammonium bromide (CTAB) under hydrothermal conditions. The observed specific surface area and pore volume of STP-1 were 878 m2g−1 and 0.75 ccg−1, respectively. Mesoporous STP-1 has been thoroughly characterized by XRD, FT-IR, Raman spectroscopy, SEM, and TEM analyses. Titanium incorporation (Ti/Si = 0.006) was confirmed from the EDX analysis. This mesoporous STP-1 was used as a heterogeneous catalyst for the selective oxidation of styrene into benzaldehye in the presence of dilute aqueous H2O2 as an oxidizing agent. Various reaction parameters such as the reaction time, the reaction temperature, and the styrene/H2O2 molar ratio were systematically studied in this article. Under optimized reaction conditions, the selectivity of benzaldehyde could reach up to 93.8% from styrene over STP-1. Further, the importance of both titanium and phosphate in the synthesis of STP-1 for selective styrene oxidation was examined by comparing the catalytic result with only a phosphate-modified mesoporous silica material, and it suggests that both titanium and phosphate synergistically play an important role in the high selectivity of benzaldehyde in the liquid phase oxidation of styrene.

Thiadiazole-Based Covalent Organic Frameworks with a Donor-Acceptor Structure: Modulating Intermolecular Charge Transfer for Efficient Photocatalytic Degradation of Typical Emerging Contaminants

As novel metal-free photocatalysts, covalent organic frameworks (COFs) have great potential to decontaminate pollutants in water. Fast charge recombination in COFs yet inhibits their photocatalytic performance. We found that the intramolecular charge transfer within COFs could be modulated via constructing a donor-acceptor (D-A) structure, leading to the improved photocatalytic performance of COFs toward pollutant degradation. By integrating electron donor units (1,3,4-thiadiazole or 1,2,4-thiadiazole ring) and electron acceptor units (quinone), two COFs (COF-TD1 and COF-TD2) with robust D-A characteristics were fabricated as visible-light-driven photocatalysts to decontaminate paracetamol. With the readily excited electrons in 1,3,4-thiadiazole rings, COF-TD1 exhibited efficient electron-hole separation through a push-pull electronic effect, resulting in superior paracetamol photodegradation performance (>98% degradation in 60 min) than COF-TD2 (∼60% degradation within 120 min). COF-TD1 could efficiently photodegrade paracetamol in complicated water matrices even in river water, lake water, and sewage wastewater. Diclofenac, bisphenol A, naproxen, and tetracycline hydrochloride were also effectively degraded by COF-TD1. Efficient photodegradation of paracetamol in a scaled-up reactor could be achieved either by COF-TD1 in a powder form or that immobilized onto a glass slide (to further ease recovery and reuse) under natural sunlight irradiation. Overall, this study provided an effective strategy for designing excellent COF-based photocatalysts to degrade emerging contaminants.

Porous organic-inorganic hybrid materials for catalysis, energy and environmental applications

Introduction of organic functionalities into the porous inorganic materials make the resulting hybrid porous framework not only more flexible and hydrophobic, but also provide additional scope for further functionalization, which...

Pyromellitic diamide-diacid bridged mesoporous organosilica nanospheres with controllable morphologies: a novel PMO for the facile and expeditious synthesis of imidazole derivatives

In this work, novel pyromellitic diamide-diacid bridged mesoporous organosilica (PMAMOS) nanospheres with controllable morphologies and Brønsted acid catalytic centers were designed and prepared through a convenient method by altering the addition sequence of precursors, solvent, and aging time. The obtained PMAMOSs demonstrate high surface areas and uniform pore sizes. FESEM, HRTEM, BET, EDX, XRD, FTIR and TGA analyses were performed to characterize and examine the effective factors for the preparation of PMAMOS nanospheres. Due to the appropriate physicochemical properties including Brønsted acid centers, suitable surface area and thermal stability of the PMAMOS nanosphere material, it was explored in the three-component reaction of benzyl or benzoin, ammonium acetate, and different aldehyde derivatives as a case study of multicomponent reactions. Corresponding imidazole derivatives were obtained in EtOH under reflux conditions in high to quantitative yields and short reaction times. It was also shown that the heterogeneous solid acid can be reused at least five times with negligible loss of its catalytic activity, indicating the appropriate stability and high activity of the newly introduced mesoporous organosilica.

Thiol/methylthio-functionalized porous aromatic frameworks for simultaneous capture of aromatic pollutants and Hg(II) from water

Simultaneously capturing organic pollutants and heavy metal can greatly reduce the water remediation time and cost, however it is still a great challenge presently. Herein, two novel thiol/methylthio-functionalized porous aromatic frameworks were synthesized as sorbents via the Sonogashira-Hagihara reaction of 1,3,5-triethynylbenzene and 1,3,5-tris(4-bromophenyl) benzene, the subsequent chloromethylation of the phenyl rings, and the final nucleophile substitution of -Cl groups by NaSH/NaSMe. These two sorbents were characterized by FT-IR spectra, energy dispersive X-ray spectra, scanning electron microscope, nitrogen adsorption analysis, thermo-gravimetric analysis, and elemental analyses. Adsorption experiments displayed that new sorbents had high uptake abilities and fast adsorption kinetics for aromatic pollutants and mercury (II) (Hg(II)). The maximum adsorption capacity (Q_max) of toluene and m-xylene on both new sorbents were 531.9-571.4 mg/g with the kinetic binding rate constants (k_obs) of 0.00276-0.02422 g/mg/min, and the Q_max values of Hg(II) were 148.1-180.3 mg/g with k_obs of 0.00592-0.01573 g/mg/min. Moreover, new sorbents indicated high simultaneous uptake abilities for these pollutants with good reusability, and finally they were successfully applied to the simultaneous remediation of these pollutants in two simulated sewages with high and low concentration, indicating their great practical application potential in wastewater remediation.

Recyclable Supramolecular Assembly-Induced Emission System for Selective Detection and Efficient Removal of Mercury(II)

An efficient strategy for simultaneously detecting and removing Hg²⁺ from water is vital to address mercury pollution. Herein a supramolecular assembly G⊂H with photoluminescent properties is facilely constructed through the self-assembly of a functional pillar[5]arene bearing two N,N-dimethyldithiocarbamoyl binding sites (H) and an AIE-active tetraphenylethene derivative (G). Remarkably, the fluorescence of G⊂H can be exclusively quenched by Hg²⁺ among the 30 cations due to the formation of non-luminous ground state complex and only L-cysteine can restore fluorescence in the common 20 amino acids. Meanwhile, the probe G⊂H has a considerable thermal and pH stability, a good anti-interference property from various cations, and a satisfactory sensitivity. More importantly, G⊂H exhibits a prominent capability of Hg²⁺ removal with rapid capture rate (within 1 h) and excellent adsorption efficiency (98 %), as well as a highly efficient recyclability without losing any adsorption activity.

A novel N,S-rich COF and its derived hollow N,S-doped carbon@Pd nanorods for electrochemical detection of Hg2+ and paracetamol

Covalent-organic frameworks (COFs) are conjugate crystalline polymers with high porosity, controllable pores and structure as well as large specific surface area, showing great potential for electrochemical sensors. Here, a new N,S-rich COF_BTT-TZT is proposed by direct amine-aldehyde dehydration condensation between 4,4',4''-(1,3,5-triazine-2,4,6-triyl)trianiline (TZT) and benzo [1,2-b:3,4-b':5,6-b'']trithiophene-2,5,8-tricarbaldehyde (BTT). The COF_BTT-TZT has a hexagonal hcb structure with theoretical pore of 2.2 nm and presents rod-like morphology with many small flakes on its surface. Particularly, there are lots of S and N atoms in COF_BTT-TZT, which provides abundant adsorption sites for Hg²⁺ so that it can be used to detect Hg²⁺. The proposed Hg²⁺ sensor has a linear range of 0.54 nM-5.0 μM and a detection limit of 0.18 nM. Besides, using COF_BTT-TZT as precursor and template, the hollow N,S-doped C@Pd nanorods which possesses many tiny Pd nanoparticles embedded in rods-like hollow structure are obtained. An electrochemical paracetamol sensor is also proposed based on the N,S-doped C@Pd nanorods, showing low detection limit of 11 nM and wide linear range of 33 nM-120 μM. The good results provide an important guidance for the application of COF in electrochemical sensors.

Synthesis of self-assembled hierarchical AlPO-34 microspheres by using an ionic liquid and its application in heavy metal removal

Hierarchical AlPO-34 molecular sieves microspheres were synthesized in a [BMIm]Br ionic liquid without template or complex post-treatment process. The formation mechanism of such framework structures and their morphology were investigated. [BMIm]Br was proven to serve as both solvent and sole provider of the structure directing agent. The organic amine in the compound affects the framework density of the crystals and promotes the formation of a chabazite (CHA) type framework. After ageing for 1 h the AlPO-34 microspheres are formed due to the aggregation properties of the ionic liquid. The hierarchical mirosphere has a relatively high Brunauer-Emmett-Teller surface area and a considerably uniform mesoporous channel network. The hierarchical AlPO-34 microspheres were used as absorbers of heavy metal cations and showed a higher loading capacity and distribution coefficient compared with the AlPO-34-NH.

The design and synthesis of heterogeneous catalysts for environmental applications

With the rapid advancements in synthetic strategies, the field of heterogeneous catalysis has expanded enormously over the last few decades, and today it is one of the foremost areas in energy and environmental research. Various templating and non-templating routes for designing porous nanomaterial-based catalysts starting from precursor building blocks are highlighted here. CO₂ and biomass are two major abundant resources that can be utilized as feedstocks for various heterogeneous catalytic processes. These are described in brief, together with environmental clean-up applications and future perspectives for addressing environmental issues.

Efficient removal of mercury ions with MoS2-nanosheet-decorated PVDF composite adsorption membrane

The exploitation of a new adsorbent with a high adsorption performance and recyclability is of great practical significance for the treatment of wastewater containing mercury ions. In this study, a novel membrane adsorbent was fabricated by blending MoS₂ nanosheets into a PVDF polymer matrix (P-PVDF/MoS₂) followed by non-solvent-induced phase conversion. This material was able to bind mercury ions and was not affected by the solution ionic strength, co-existing anions, or interfering heavy metal ions. The optimal pH range for mercury ion elimination was 4.5-6.0, and P-PVDF/MoS₂ exhibited a maximum adsorption capacity of 578 mg g^-1. The pseudo-second-order adsorption kinetics and Langmuir isotherm models best described the adsorption process. The adsorption mechanism was mainly monolayer chemisorption, for which the S groups were the major active sites. Furthermore, the membrane could be removed from the aqueous solution easily using tweezers, and the removal efficiency of mercury ions remained over 90% after ten cycles. This study suggests that the inexpensive and recyclable P-PVDF/MoS₂ membranes can be used for the efficient removal of heavy metal ions from wastewater at a large scale.