Tailored Metal-Organic Frameworks for Water Purification: Perfluorinated Fe-MOFs for Enhanced Heterogeneous Catalytic Ozonation

An industrially viable catalyst for heterogeneous catalytic ozonation (HCO) in water purification requires the characteristics of good dispersion of active species on its surface, efficient electron transfer for ozone decay, and maximum active species utilization. While metal-organic frameworks (MOFs) represent an attractive platform for HCO, the metal nodes in the unmodified MOFs exhibit low catalytic activity. Herein, we present a perfluorinated Fe-MOF catalyst by substituting H atoms on the metalated ligands with F atoms (termed 4F-MIL-88B) to induce structure evolution. The Lewis acidity of 4F-MIL-88B was enhanced via the formation of Fe nodes, tailoring the electron distribution on the catalyst surface. As a result of catalyst modification, the rate constant for degradation of the target compounds examined increased by ∼700% compared with that observed for the unmodified catalyst. Experimental evidence and theoretical calculations showed that the modulated polarity and the enhanced electron transfer between the catalyst and ozone molecules contributed to the adsorption and transformation of O3 to •OH on the catalyst surface. Overall, the results of this study highlight the significance of tailoring the metalated ligands to develop highly efficient and stable MOF catalysts for HCO and provide an in-depth mechanistic understanding of their structure-function evolution, which is expected to facilitate the applications of nanomaterial-based processes in water purification.

Exploring Optimal Water Splitting Bifunctional Alloy Catalyst by Pareto Active Learning

Design of bifunctional multimetallic alloy catalysts, which are one of the most promising candidates for water splitting, is a significant issue for the efficient production of renewable energy. Owing to large dimensions of the components and composition of multimetallic alloys, as well as the trade-off behavior in terms of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) overpotentials for bifunctional catalysts, it is difficult to search for high-performance bifunctional catalysts with multimetallic alloys using conventional trial-and-error experiments. Here, an optimal bifunctional catalyst for water splitting is obtained by combining Pareto active learning and experiments, where 110 experimental data points out of 77946 possible points lead to effective model development. The as-obtained bifunctional catalysts for HER and OER exhibit high performance, which is revealed by model development using Pareto active learning; among the catalysts, an optimal catalyst (Pt_0.15 Pd_0.30 Ru_0.30 Cu_0.25 ) exhibits a water splitting behavior of 1.56 V at a current density of 10 mA cm^-2 . This study opens avenues for the efficient exploration of multimetallic alloys, which can be applied in multifunctional catalysts as well as in other applications.

Morphology Modulation and Phase Transformation of Manganese-Cobalt Carbonate Hydroxide Caused by Fluoride Doping and Its Effect on Boosting the Overall Water Electrolysis

Increasing demands for pollution-free energy resources have stimulated intense research on the design and fabrication of highly efficient, inexpensive, and stable non-noble earth-abundant metal catalysts with remarkable catalytic activity for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Morphology control of the catalysts is widely implemented as an effective strategy to change the surface atomic coordination and increase the catalytic behavior of the catalysts. In this study, we have designed a series of Mn-Co catalyts with different morphologies on the graphite paper substrate to enhance OER and HER activities in alkaline media. The prepared catalysts with different morphologies were successfully obtained by adjusting the amount of ammonium fluoride (NH₄F) in the hydrothermal process. The electrochemical tests display that the cubic-like Mn-Co catalyst with pyramids on the faces at a concentration of 0.21 M NH₄F exhibits the best activity toward both OER and HER. The cubic-like Mn-Co catalyst with pyramids on the faces showed overpotentials of 240 and 82 mV at a current density of 10 mA cm^-2 for OER and HER, respectively. Also, the cubic-like Mn-Co catalyst with pyramids on the faces required overpotentials of 319 and 216 mV to reach the current density of 100 mA cm^-2 for OER and HER, respectively. The current density of this catalyst at η = 0.32 V was 701.05 mA cm^-2 for OER, and for HER, the current density of the catalyst was 422.89 mA cm^-2 at η = 0.23 V. The Tafel slopes of the Mn-Co catalyst with cubic-like structures with pyramids on the faces were 78 and 121 mV dec^-1 for OER and HER, respectively. A two-electrode overall water electrolysis system using this bifunctional Mn-Co catalyst exhibited low cell voltages of 1.60 in the alkaline electrolyte at the standard current density of 10 mA cm^-2 with appropriate stability. These electrochemical merits exhibit the considerable potential of the cubic-like Mn-Co catalyst with pyramids on the faces for bifunctional OER and HER applications.

Mo doping and Se vacancy engineering for boosting electrocatalytic water oxidation by regulating the electronic structure of self-supported Co9Se8@NiSe

Oxygen evolution reactions (OERs) are regarded as the rate-determining step of electrocatalytic overall water splitting, which endow OER electrocatalysts with the advantages of high activity, low cost, good conductivity, and excellent stability. Herein, a facile H₂O₂-assisted etching method is proposed for the fabrication of Mo-doped ultrathin Co₉Se₈@NiSe/NF-X heterojunctions with rich Se vacancies to boost electrocatalytic water oxidation. After step-by-step electronic structure modulation by Mo doping and Se vacancy engineering, the self-standing Mo-Co₉Se₈@NiSe/NF-60 heterojunctions deliver a current density of 50 mA cm^-2 with an overpotential of 343 mV and a cell voltage of only 1.87 V at 50 mA cm^-2 for overall water splitting in 1.0 M KOH. Our study opens up the possibility of realizing step-by-step electronic structure modulation of nonprecious OER electrocatalysts via heteroatom doping and vacancy engineering.

Boosting the Oxygen Evolution Reaction by Controllably Constructing FeNi3/C Nanorods

Transition bimetallic alloy-based catalysts are regarded as attractive alternatives for the oxygen evolution reaction (OER), attributed to their competitive economics, high conductivity and intrinsic properties. Herein, we prepared FeNi3/C nanorods with largely improved catalytic OER activity by combining hydrothermal reaction and thermal annealing treatment. The temperature effect on the crystal structure and chemical composition of the FeNi3/C nanorods was revealed, and the enhanced catalytic performance of FeNi3/C with an annealing temperature of 400 °C was confirmed by several electrochemical tests. The outstanding catalytic performance was assigned to the formation of bimetallic alloys/carbon composites. The FeNi3/C nanorods showed an overpotential of 250 mV to afford a current density of 10 mA cm−2 and a Tafel slope of 84.9 mV dec−1, which were both smaller than the other control samples and commercial IrO2 catalysts. The fast kinetics and high catalytic stability were also verified by electrochemical impendence spectroscopy and chronoamperometry for 15 h. This study is favorable for the design and construction of bimetallic alloy-based materials as efficient catalysts for the OER.

Facile Synthesis of Sulfate-Intercalated CoFe LDH Nanosheets Derived from Two-Dimensional ZIF-9(III) for Promoted Oxygen Evolution Reaction

Layered double hydroxide (LDH) has emerged as a promising electrocatalyst; however, the synthetic method usually requires high temperature and high pressure, and sulfate-intercalated LDH is rarely reported. Herein, the sulfate-intercalated CoFe LDH nanosheets were successfully fabricated at ambient temperature via a facile strategy, using two-dimensional ZIF-9(III) as a template and FeSO4 as both etchant and iron source. When the as-prepared sulfate-intercalated CoFe LDH acts as an electrocatalyst, it presents superior electrocatalytic performance for the oxygen evolution reaction (OER), requiring low overpotential (η@10 mA cm−2 = 218 mV) with a small Tafel slope of 59.9 mV dec−1 in 1.0 M KOH, which compares favorably with commercial RuO2 and most reported transition-metal electrocatalysts. The high catalytic activity of CoFe LDH might be ascribed to the large interlayer space distance originating from special SO42− ions and the strong synergistic effects between Fe and Co. This work provides a novel and feasible approach to designing highly efficient electrocatalysts based on advanced LDH materials for OER.

Route to the Structure-Controlled Synthesis of Fe Nanobelts and Their Oxygen Evolution Reaction Application

Belt-shaped metal-organic frameworks (MOFs) have received extensive attention because of their unique structure. In this Communication, Fe-MOF nanobelts were synthesized by a solvothermal method with Fe²⁺ as the metal source and could not be obtained by using Fe³⁺ as the metal source. The final result shows that Fe²⁺ played a transitional role in the process of achieving belt-shaped and cubelike structural changes. Our work provides an idea for the synthesis of belt-shaped MOFs and promotes the development of electrocatalysts.

Boosting oxygen evolution of layered double hydroxide through electronic coupling with ultralow noble metal doping

Electrocatalytic water oxidation is a rate-determining step in the water splitting process; however, its efficiency is significantly hampered by the limitations of cost-effective electrocatalysts. Here, an advanced Co(OH)₂ electrocatalyst with ultralow iridium (Ir) doping is developed to enable outstanding oxygen evolution reaction (OER) properties; that is, in a 1 M KOH medium, an overpotential of only 262 mV is required to achieve a current density of 10 mA cm^-2, and a small Tafel slope of 66.9 mV dec^-1 is achieved, which is markedly superior to that of the commercial IrO₂ catalyst (301 mV@10 mA cm^-2; 66.9 mV dec^-1). Through the combination of experimental data and a mechanism study, it is disclosed that the high intrinsic OER activity results from the synergistic electron coupling of oxidized Ir and Co(OH)₂, which significantly moderate the adsorption energy of the intermediates. Moreover, we have also synthesized Ru-Co(OH)₂ nanosheets and demonstrated the universal syntheses of Ir-doped CoM (M = Ni, Fe, Mn, and Zn) layered double hydroxides (LDHs).

High spin Fe3+-related bonding strength and electron transfer for sensitive and stable SERS detection

The SERS performance of trimetallic MIL-101(FeNiTi) and the spin state of Fe3+ is positively correlated. The SERS enhancement mechanism is explored regarding the bonding strength and charge transfer between molecules and MIL-101.

The template synthesis of ultrathin metallic Ir nanosheets as a robust electrocatalyst for acidic water splitting

Ultrathin metallic iridium nanosheets (∼4 nm) were synthesized using MIL-88A as the sacrificing template at room temperature. Ir-NS shows superior and stable water splitting performance in an acidic medium.

Fenton reaction-mediated dual-attenuation of signal for ultrasensitive amperometric immunoassay

In order to alter the complexion of immunoprobe with large impedance as negative factor in sensitivity of amperometric immunosensor, a strategy of Fenton reaction-mediated dual-attenuation of signal was proposed. Herein, metal-polydopamine-Fe³⁺ composite with the ability of Fenton reaction was initially prepared as immunoprobe for an ultrasensitive immunoassay. The polymerization of dopamine occurred on the surface of ZIF-67 to gain the metal-polydopamine shell, which possessed rich functional groups, negative charge and high specific surface. Then the prepared functional shell was further used to absorb Fe³⁺ and immobilize labeling antibody as immunoprobe, which was used to construct a sandwich type immunosensor. With addition of H₂O₂ and aniline, Fenton reaction was triggered to produce hydroxyl radicals, which can not only decrease the current value by degrading methylene blue molecules, but also further initiate aniline to polymerize into non-conductive polyaniline for successive abatement of signal intensity. Therefore, the dual-attenuation of signal model rendered the immunoprobe into a favorable factor and synchronously enhance sensitivity. Expectedly, the detection performance with a linear range from 1.0 × 10^-4-100 ng mL^-1 and ultralow detection limit of 9.07 × 10^-5 ng mL^-1 toward neuron-specific enolase was obtained under optimal conditions. This work offered a novel tactic for enhancing sensitivity of immunosensor through the preparation of functional immunoprobe and its rational utilization as signal enhancer.

Current trends and perspectives on emerging Fe-derived noble-metal-free oxygen electrocatalysts

This article discusses recent progress in the development of Fe-derived noble metal-free electrocatalysts, including the strategies used for design, synthesis, and assessment of their performance in alkaline conditions.