Spontaneous Internal Electric Field in Heterojunction Boosts Bifunctional Oxygen Electrocatalysts for Zinc-Air Batteries: Theory, Experiment, and Application

Heterojunctions are a promising class of materials for high-efficiency bifunctional oxygen electrocatalysts in both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). However, the conventional theories fail to explain why many catalysts behave differently in ORR and OER, despite a reversible path (* O2 ⇋* OOH⇋* O⇋* OH). This study proposes the electron-/hole-rich catalytic center theory (e/h-CCT) to supplement the existing theories, it suggests that the Fermi level of catalysts determines the direction of electron transfer, which affects the direction of the oxidation/reduction reaction, and the density of states (DOS) near the Fermi level determines the accessibility for injecting electrons and holes. Additionally, heterojunctions with different Fermi levels form electron-/hole-rich catalytic centers near the Fermi levels to promote ORR/OER, respectively. To verify the universality of the e/h-CCT theory, this study reveals the randomly synthesized heterostructural Fe3 N-FeN0.0324 (Fex N@PC with DFT calculations and electrochemical tests. The results show that the heterostructural F3 N-FeN0.0324 facilitates the catalytic activities for ORR and OER simultaneously by forming an internal electron-/hole-rich interface. The rechargeable ZABs with Fex N@PC cathode display a high open circuit potential of 1.504 V, high power density of 223.67 mW cm-2 , high specific capacity of 766.20 mAh g-1 at 5 mA cm-2 , and excellent stability for over 300 h.

Phyllanthus emblica Seed-Derived Hierarchically Porous Carbon Materials for High-Performance Supercapacitor Applications

The electrical double-layer supercapacitance performance of the nanoporous carbons prepared from the Phyllanthus emblica (Amala) seed by chemical activation using the potassium hydroxide (KOH) activator is reported. KOH activation was carried out at different temperatures (700-1000 °C) under nitrogen gas atmosphere, and in a three-electrode cell set-up the electrochemical measurements were performed in an aqueous 1 M sulfuric acid (H₂SO₄) solution. Because of the hierarchical pore structures with well-defined micro- and mesopores, Phyllanthus emblica seed-derived carbon materials exhibit high specific surface areas in the range of 1360 to 1946 m² g^-1, and the total pore volumes range from 0.664 to 1.328 cm³ g^-1. The sample with the best surface area performed admirably as the supercapacitor electrode-material, achieving a high specific capacitance of 272 F g^-1 at 1 A g^-1. Furthermore, it sustained 60% capacitance at a high current density of 50 A g^-1, followed by a remarkably long cycle-life of 98% after 10,000 subsequent charging/discharging cycles, demonstrating the electrode's excellent rate-capability. These results show that the Phyllanthus emblica seed would have significant possibilities as a sustainable carbon-source for the preparing high-surface-area activated-carbons desired in high-energy-storage supercapacitors.

Iodine adsorption and electrochemical double-layer capacitor characteristics of activated carbon prepared from low-cost biomass

The efficient adsorption application and electric double-layer capacitor material with low-cost biomass-based activated carbon materials have been quite common recently. In this study, chestnut shell-based activated carbons were produced by chemical activation. ZnCl₂, H₃PO₄, and KOH agents were used for chemical activation. The obtained activated carbon, iodine adsorption from aqueous solutions, and its use as an electro capacitor were investigated. The scanning electron microscope, nitrogen adsorption/desorption, and Fourier transform infrared spectroscopy were used for characterization. The values of surface area and iodine adsorption capacity of the chestnut shell-based activated carbon are 1544 m² g^-1 and 1525 mg g^-1. As a result, a specific capacitance of 97 Fg^-1 with chestnut shell-based activated carbon was obtained in a 1 M KCl electrolyte for the electrochemical double-layer capacitor. This study shows that activated carbon based on the chestnut shell can be used both as an electrochemical energy storage material and as an adsorbent in iodine adsorption.

Preparation of Boron/Sulfur-Codoped Porous Carbon Derived from Biological Wastes and Its Application in a Supercapacitor

Abundant biomass resources are a good choice for preparing electrode materials for supercapacitors, but developing a versatile and simple synthetic method to convert them into electrode materials remains a challenge. In the present research, our team reports a promising strategy and cost-efficient method to fabricate boron/sulfur-codoped porous carbon from biomass sources, mainly utilizing four biomass materials. Detailed material characterization showed that the samples produced by this approach possess rich B and S doping. Additionally, the original biomass materials treated by activation produce abundant pores. Therefore, owing to the synergetic effect of abundant atomic doping and microporous/mesoporous distribution, the obtained carbon as electrode material manifested excellent specific capacitances of 290 F g⁻¹ at a 0.5 A g⁻¹ current density. Moreover, the specific energy of the prepared samples of the as-assembled symmetric supercapacitor is as high as 16.65 Wh kg⁻¹ in 1 M Na₂SO₄, with a brilliant cyclical performance of only a 2.91% capacitance decay over 10,000 cycles. In addition, it has been verified universally that three other types of bio-wastes can also prepare electrode material using this method. This paper represents a significant attempt to turn waste biomass into treasure while also providing ideas for the design and preparation of supercapacitor electrode materials.

Nelumbo nucifera Seed-Derived Nitrogen-Doped Hierarchically Porous Carbons as Electrode Materials for High-Performance Supercapacitors

Biomass-derived activated carbon materials with hierarchically nanoporous structures containing nitrogen functionalities show excellent electrochemical performances and are explored extensively in energy storage and conversion applications. Here, we report the electrochemical supercapacitance performances of the nitrogen-doped activated carbon materials with an ultrahigh surface area prepared by the potassium hydroxide (KOH) activation of the Nelumbo nucifera (Lotus) seed in an aqueous electrolyte solution (1 M sulfuric acid: H2SO4) in a three-electrode cell. The specific surface areas and pore volumes of Lotus-seed-derived carbon materials carbonized at a different temperatures, from 600 to 1000 °C, are found in the range of 1059.6 to 2489.6 m2 g-1 and 0.819 to 2.384 cm3 g-1, respectively. The carbons are amorphous materials with a partial graphitic structure with a maximum of 3.28 atom% nitrogen content and possess hierarchically micro- and mesoporous structures. The supercapacitor electrode prepared from the best sample showed excellent electrical double-layer capacitor performance, and the electrode achieved a high specific capacitance of ca. 379.2 F g-1 at 1 A g-1 current density. Additionally, the electrode shows a high rate performance, sustaining 65.9% capacitance retention at a high current density of 50 A g-1, followed by an extraordinary long cycle life without any capacitance loss after 10,000 subsequent charging/discharging cycles. The electrochemical results demonstrate that Nelumbo nucifera seed-derived hierarchically porous carbon with nitrogen functionality would have a significant probability as an electrical double-layer capacitor electrode material for the high-performance supercapacitor applications.

Dual heteroatoms doped SBA-15 templated porous carbon for symmetric supercapacitor in dual redox additive electrolyte

Porous carbon (PC) based materials is a proficient impetus for upgrading supercapacitor thanks to its traits of high surface area, meso, micropores, and replication morphology. Mainly, single and dual heteroatom doping in PC material is one of the amazing strategies for enhancing the supercapacitor activity due to the interaction of carbon and heteroatom material along with the excessive contribution of by functional groups. Here, we have synthesized nitrogen (N) and boron (B) dual doped PC (NBPC) with the assistance of Santa Barbara Amorphous (SBA-15) silica material and afterward investigated their doping impact of the heteroatom which is investigated for supercapacitor application. Among all, NBPC material delivered a high specific capacitance of 375 F/g at 2 A/g current density in 1 M H₂SO₄ electrolyte with excellent rate capability and capacitance retention. Such an attractive property of NBPC is a reflection of its high specific surface area (809 m²/g) rendered by N and B functional groups. In addition, the introduction of dual redox additive materials to the electrolyte synergistically enhanced the specific capacity of the symmetric supercapacitor cell. An unprecedented high specific capacity of 929 C/g at 3 A/g current density is observed and a 56% of initial specific capacity was retained when current density increased to 20 A/g. The fabricated symmetric cell using NBPC electrode in 1 M H₂SO₄ + 0.01 M ammonium metavanadate + Ferrous (II) sulfate dual redox additive electrolyte delivered an energy density of 48.4 W h/kg which is five folds higher than the bare electrolyte (10.1 W h/kg). Similarly, the NBPC electrode delivered a power density of 15 kW/kg in the redox additive electrolyte which is three folds higher than the bare electrolyte (5 kW/kg).

DNA derived N-doped 3D conductive network with enhanced electrocatalytic activity and stability for membrane-less biofuel cells

Enzymes are promising electrocatalysts in many biological processes. We proposed two strategies, co-immobilization and three-dimensional (3D) space design, to strengthen electron transfer (ET). In this research, DNA base and CNT were mixed in an aqueous solution; then the mixture was dried and ground. Finally, the powder was annealed in N₂ to obtain DNA derived N-doped 3D conductive network (N-G@CNT). N-G@CNT immobilized mediators on itself through adsorption. Such 3D space structure shows high activity toward a set of critical electrochemical reactions and high-performance in enzymatic biofuel cells (EBFCs). It is found that N-G@CNT conductive network possesses an interconnected porous structure and well-developed porosity. As a result, the membrane-less EBFCs equipped with enzyme/mediator co-immobilization N-G@CNT bioelectrodes were measured in a model 5 mM glucose-containing aqueous solution, human serum, and rabbit whole blood, respectively, which can generate 0.34, 0.078, and 0.15 mW cm^-2 power density, respectively. The constant-current discharge method carried out in a model 5 mM glucose-containing aqueous solution shows that the discharge time reached 19 h at a discharge current density of 0.01 mA cm^-2. The membrane EBFCs can deliver a high open circuit voltage of 0.68 V, a short-circuit current density of 2 mA cm^-2, and a maximum power density of 0.5 mW cm^-2.