Lithium-doped ZrO2 nanoparticles for SERS-based norfloxacin drug detection

Surface-enhanced Raman scattering (SERS) spectroscopy is a highly specific and ultrasensitive analytical technique; thus, it is an ideal candidate for therapeutic drug monitoring. However, SERS measurements of drugs in a sample are inevitably affected by the environment. In this study, we synthesized ZrO2 nanoparticles (NPs) doped with the first group of elements (Li, Na, and K) in the main block and evaluated their SERS performance. The results showed that Li-ion doping could significantly enhance the SERS effect, and the degree of enhancement depended on the type and concentration of the doped ions. Compared with the highly stable ZrO2, Li ion-doped ZrO2 (Li-ZrO2) exhibited a significant increase in SERS activity. In particular, 1 % Li-ZrO2 NPs exhibited excellent SERS enhancement with an enhancement factor (EF) of 2.60 × 104, which was attributed to the decreased band gap and improved the charge transfer (CT) process after Li ion doping. The adsorption capacity of the Li-ZrO2 NPs for norfloxacin (NOR) molecules was gradually saturated with time. In addition, both acidic and alkaline conditions were unfavorable for NOR detection by the substrate. The SERS intensity exhibited a linear relationship within the NOR concentration range of 10-3-10-6 mol/L, and approximately 97.51 % of the active ingredients were detected, with a competitive detection limit of 10-6 mol/L. Furthermore, NOR detection is cost-effective and time-efficient, and the results of our study can aid in the research process and support practical applications. The proposed study provides a guidance for improving the SERS activity of semiconductors for sensing.

Plant-Assisted Green Synthesis of MgO Nanoparticles as a Sustainable Material for Bone Regeneration: Spectroscopic Properties

This work is devoted to magnesium oxide (MgO) nanoparticles (NPs) for their use as additives for bone implants. Extracts from four different widely used plants, including Aloe vera, Echeveria elegans, Sansevieria trifasciata, and Sedum morganianum, were evaluated for their ability to facilitate the "green synthesis" of MgO nanoparticles. The thermal stability and decomposition behavior of the MgONPs were analyzed by thermogravimetric analysis (TGA). Structure characterization was performed by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), ultraviolet-visible spectroscopy (UV-Vis), dynamic light scattering (DLS), and Raman scattering spectroscopy (RS). Morphology was studied by scanning electron microscopy (SEM). The photocatalytic activity of MgO nanoparticles was investigated based on the degradation of methyl orange (MeO) using UV-Vis spectroscopy. Surface-enhanced Raman scattering spectroscopy (SERS) was used to monitor the adsorption of L-phenylalanine (L-Phe) on the surface of MgONPs. The calculated enhancement factor (EF) is up to 102 orders of magnitude for MgO. This is the first work showing the SERS spectra of a chemical compound immobilized on the surface of MgO nanoparticles.

Breaking Barriers: Exploring Neurotransmitters through In Vivo vs. In Vitro Rivalry

Neurotransmitter analysis plays a pivotal role in diagnosing and managing neurodegenerative diseases, often characterized by disturbances in neurotransmitter systems. However, prevailing methods for quantifying neurotransmitters involve invasive procedures or require bulky imaging equipment, therefore restricting accessibility and posing potential risks to patients. The innovation of compact, in vivo instruments for neurotransmission analysis holds the potential to reshape disease management. This innovation can facilitate non-invasive and uninterrupted monitoring of neurotransmitter levels and their activity. Recent strides in microfabrication have led to the emergence of diminutive instruments that also find applicability in in vitro investigations. By harnessing the synergistic potential of microfluidics, micro-optics, and microelectronics, this nascent realm of research holds substantial promise. This review offers an overarching view of the current neurotransmitter sensing techniques, the advances towards in vitro microsensors tailored for monitoring neurotransmission, and the state-of-the-art fabrication techniques that can be used to fabricate those microsensors.

Noble metal-free SERS: mechanisms and applications

Surface-enhanced Raman scattering (SERS) is a very important tool in vibrational spectroscopy. The coupling of nanomaterials induces local surface plasmon resonance (LSPR), which contributes greatly to SERS. Due to its remarkable sensitivity in trace detection, SERS has gained prominence in the fields of catalysis, biosensors, drug tracking, and optoelectronic devices. SERS activity is believed to be closely related to the LSPR and charge transfer (CT) of the material. Noble metal nanostructures have been commonly used as SERS-active substrates due to their strong local electric fields and relatively mature preparation, application, and enhancement mechanisms. In recent years, SERS research based on semiconductor materials has attracted significant attention because semiconductor materials have advantages such as repeatable preparation, simple pretreatment, stable SERS spectra and superior biocompatibility, stability, and reproducibility. Semiconductor-based SERS has the potential to enrich SERS theory and applications. Thus, the development of semiconductor materials will introduce a new epoch for SERS-based research. In this review, we outline the two main kinds of semiconductor SERS-active substrates: inorganic and organic semiconductor SERS-active substrates. We also provide an overview of the SERS mechanism for different kinds of materials and SERS-based applications.

A Review on Integrated ZnO-Based SERS Biosensors and Their Potential in Detecting Biomarkers of Neurodegenerative Diseases

Surface-enhanced Raman spectroscopy (SERS) applications in clinical diagnosis and spectral pathology are increasing due to the potential of the technique to bio-barcode incipient and differential diseases via real-time monitoring of biomarkers in fluids and in real-time via biomolecular fingerprinting. Additionally, the rapid advancements in micro/nanotechnology have a visible influence in all aspects of science and life. The miniaturization and enhanced properties of materials at the micro/nanoscale transcended the confines of the laboratory and are revolutionizing domains such as electronics, optics, medicine, and environmental science. The societal and technological impact of SERS biosensing by using semiconductor-based nanostructured smart substrates will be huge once minor technical pitfalls are solved. Herein, challenges in clinical routine testing are addressed in order to understand the context of how SERS can perform in real, in vivo sampling and bioassays for early neurodegenerative disease (ND) diagnosis. The main interest in translating SERS into clinical practice is reinforced by the practical advantages: portability of the designed setups, versatility in using nanomaterials of various matter and costs, readiness, and reliability. As we will present in this review, in the frame of technology readiness levels (TRL), the current maturity reached by semiconductor-based SERS biosensors, in particular that of zinc oxide (ZnO)-based hybrid SERS substrates, is situated at the development level TRL 6 (out of 9 levels). Three-dimensional, multilayered SERS substrates that provide additional plasmonic hot spots in the z-axis are of key importance in designing highly performant SERS biosensors for the detection of ND biomarkers.

Metallic nanoparticles as effective sensors of bio-molecules

This work describes biologically important nanostructures of metals (AgNPs, AuNPs, and PtNPs) and metal oxides (Cu₂ONPs, CuONSs, γ-Fe₂O₃NPs, ZnONPs, ZnONPs-GS, anatase-TiO₂NPs, and rutile-TiO₂NPs) synthesized by different methods (wet-chemical, electrochemical, and green-chemistry methods). The nanostructures were characterized by molecular spectroscopic methods, including scanning/transmission electron microscopy (SEM/TEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction analysis (XRD), photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy (UV-vis), dynamic light scattering (DLS), Raman scattering spectroscopy (RS), and infrared light spectroscopy (IR). Then, a peptide (bombesin, BN) was adsorbed onto the surface of these nanostructures from an aqueous solution with pH of 7 that did not contain surfactants. Adsorption was monitored using surface-enhanced Raman scattering spectroscopy (SERS) to determine the influence of the nature of the metal surface and surface evolution on peptide geometry. Information from the SERS studies was compared with information on the biological activity of the peptide. The SERS enhancement factor was determined for each of the metallic surfaces.

Electrochemistry at Krakowian research institutions

The electrochemistry research team activity from Poland is marked by significant increase in the last 20 years. The joining of European Community in 2004 gives an impulse for the development of Polish science. The development of electrochemistry has been stimulated by cooperation with industry and the establishment of technology transfer centers, technology parks, business incubators, etc. and the mostly by simplified international collaborations. Five research institutions from Krakow reports work in the field of electrochemistry. The achievements of all teams are briefly described.

Emerging SERS biosensors for the analysis of cells and extracellular vesicles

Cells and their derived extracellular vesicles (EVs) or exosomes contain unique molecular signatures that could be used as biomarkers for the detection of severe diseases such as cancer, as well as monitoring the treatment response. Revealing these molecular signatures requires developing non-invasive ultrasensitive tools to enable single molecule/cell-level detection using a small volume of sample with low signal-to-noise ratio background and multiplex capability. Surface-enhanced Raman scattering (SERS) can address the current limitations in studying cells and EVs through two main mechanisms: plasmon-enhanced electric field (the so-called electromagnetic mechanism (EM)), and chemical mechanism (CM). In this review, we first highlight these two SERS mechanisms and then discuss the nanomaterials that have been used to develop SERS biosensors based on each of the aforementioned mechanisms as well as the combination of these two mechanisms in order to take advantage of the synergic effect between electromagnetic enhancement and chemical enhancement. Then, we review the recent advances in designing label-aided and label-free SERS biosensors in both colloidal and planar systems to investigate the surface biomarkers on cancer cells and their derived EVs. Finally, we discuss perspectives of emerging SERS biosensors in future biomedical applications. We believe this review article will thus appeal to researchers in the field of nanobiotechnology including material sciences, biosensors, and biomedical fields.

Tailoring moisture electroactive Ag/Zn@cotton coupled with electrospun PVDF/PS nanofibers for antimicrobial face masks

Face mask has become an essential and effective apparatus to protect human beings from air pollution, especially the air-borne pathogens. However, most commercial face masks can hardly achieve good particulate matters (PMs) and high bactericidal efficacy concurrently. Herein, a bilayer structured composite filter medium with built-in antimicrobial activities was constructed by combining cotton woven modified by magnetron sputtered Ag/Zn coatings and electrospun poly(vinylidene fluoride)/polystyrene (PVDF/PS) nanofibers. With the benefit of external moisture, an electrical stimulation was generated inside the composite fabric and thus endowed the fabric antimicrobial function. The resultant composite fabric presented conspicuous performance for integrated air pollution control, high filtration performance towards PM_0.3 (99.1%, 79.2 Pa) and exceptional interception ratio against Escherichia coli (99.64%) and Staphylococcus aureus (98.75%) within 20 min contact. The high efficiency contact sterilization function of the bilayer fabric could further potentially promote disinfection and reuse of the filter media. This work may provide a new perspective on designing high-performance face mask media for public health protection.

Semiconductor-based surface enhanced Raman scattering (SERS): from active materials to performance improvement

Surface enhanced Raman scattering (SERS) is a powerful spectral analysis technique and has exhibited remarkable application prospects in various fields. The design and fabrication of high-performance SERS substrates is key to promoting the development of SERS technology. Apart from noble metal substrates, non-metal substrates based on semiconductor materials have received increasing attention in recent years owing to their unique physical, chemical, and optical properties. However, compared with noble metal substrates, most semiconductor substrates show weak Raman enhancement ability. Therefore, exploring effective strategies to improve the SERS sensitivity is an urgent task. Numerous reviews have outlined the research progress of semiconductor SERS substrates, which mainly focused on summarizing the material category of semiconductor substrates. However, reviews that systematically summarize the strategies for improving the SERS performance of semiconductor substrates are lacking. In this review, we comprehensively discuss the research on semiconductor SERS from the aspects of mechanism, materials, and modification. Firstly, the Raman enhancement mechanism of semiconductor substrates and the SERS-active materials are discussed. Then, we summarize several effective approaches to boost the SERS performance of semiconductor substrates. In conclusion, we propose some prospects for this field.

SERS/TERS Characterization of New Potential Therapeutics: The Influence of Positional Isomerism, Interface Type, Oxidation State of Copper, and Incubation Time on Adsorption on the Surface of Copper(I) and (II) Oxide Nanoparticles

The aim of this study was to investigate how the oxidation state of copper (Cu(I) vs Cu(II)), the nature of the interface (solid/aqueous vs solid/air), positional isomerism, and incubation time affect the functionalization of the surface of copper oxide nanostructures by [(butylamino)(pyridine)methyl]phenylphosphinic acid (PyPA). For this purpose, 2-, 3-, and 4-isomers of PyPA and the nanostructures were synthesized. The nanostructure were characterized by UV-visible spectroscopy (UV–vis), scanning electron microscopy (SEM), Raman spectroscopy (RS), and X-ray diffraction (XRD) analysis, which proved the formation of spherical Cu₂O nanoparticles (Cu₂ONPs; 1500–600 nm) and leaf-like CuO nanostructures (CuONSs; 80–180/400–700 nm, width/length). PyPA isomers were deposited on the surface of NSs, and adsorption was investigated by surface-enhanced Raman scattering (SERS) and tip-enhanced Raman scattering (TERS). The changes of adsorption on the surface of copper oxide NSs caused by the above-mentioned factors were described and the enhancement factor on this substrate was calculated.

Determination of the Influence of Various Factors on the Character of Surface Functionalization of Copper(I) and Copper(II) Oxide Nanosensors with Phenylboronic Acid Derivatives

In this work, we attempt to determine the influence of the oxidation state of copper [Cu(I) vs Cu(II)], the nature of the interface (solid/aqueous vs solid/air), the incubation time, and the structure of N-substituted phenylboronic acids (PBAs) functionalizing the surface of copper oxide nanostructures (NSs) on the mode of adsorption. For this purpose, 4-[(N-anilino)(phosphono)-S-methyl]phenylboronic acid (1-PBA) and its two analogues (2-PBA and bis{1-PBA}) and the copper oxide NSs were synthesized in a surfactant-/ion-free solution via a synthetic route that allows controlling the size and morphology of NSs. The NSs were characterized by scanning electron microscopy, ultraviolet-visible spectroscopy, Raman spectroscopy, and X-ray diffraction, which confirmed the formation of spherical Cu2O nanoparticles (Cu2ONPs) with a size of 1.5 μm to 600 nm crystallized in a cubic cuprite structure and leaf-like CuO nanostructures (CuONSs) with dimensions of 80-180 nm in width and 400-700 nm in length and crystallized in a monoclinic structure. PBA analogues were deposited on the surface of the copper oxide NSs, and adsorption was investigated using surface-enhanced Raman spectroscopy (SERS). The changes in the orientation of the molecule relative to the substrate surface caused by the abovementioned factors were described, and the signal enhancement on the copper oxide NSs was determined. This is the first study using vibrational spectroscopy for these compounds.

Electromagnetic absorbers with Schottky contacts derived from interfacial ligand exchanging metal-organic frameworks

Various types of polycrystals have been regarded as excellent electromagnetic (EM) microwave absorbents, while differentiated heterointerfaces among grains usually manipulate conductive loss and polarization relaxation, especially interfacial polarization. Herein, polar facets that dominated the optimization of EM attenuation were clarified by carefully designing polycrystalline Schottky junctions with metal-semiconductor contacts for the first time. An ingenious ligand exchange technique was utilized to construct Zn-MOF (ZIF-L) precursors for Fe-ZnO polycrystals, in which Fe-containing Fe(CN)₆^3- etching ligand acted as metallic source in Schottky junctions. By adjusting the Schottky contacts in polycrystals, the enhanced grain boundaries mainly induced stronger interfacial polarization and affected the microcurrent lightly. This is because Schottky barriers can cause local charge accumulation on heterointerfaces for polarization relaxation. Additionally, the coexistence of Zn and O vacancies brought a lot of lattice defects and distortions for dipole polarization. Thus, optimal EM wave absorbability was obtained by polycrystals with 8 h ligand exchange and an effective absorption band reaching 4.88 GHz. This work can provide guidance for designing advanced polycrystalline EM absorption materials and also highlight the mechanism and requirement of Schottky junctions dominating polarization.