Activation and conversion of alkanes in the confined space of zeolite-type materials

Acceleration of Zeolite Crystallization: Current Status, Mechanisms, and Perspectives

Zeolites are important classes of crystalline materials and possess well-defined channels and cages with molecular dimensions. They have been extensively employed as heterogeneous catalysts and gas adsorbents due to their relatively large specific surface areas, high pore volumes, compositional flexibility, definite acidity, and hydrothermal stability. The zeolite synthesis normally undergoes high-temperature hydrothermal treatments with a relatively long crystallization time, which exhibits low synthesis efficiency and high energy consumption. Various strategies, e.g., modulation of the synthesis gel compositions, employment of special silica/aluminum sources, addition of seeds, fluoride, hydroxyl (·OH) free radical initiators, and organic additives, regulation of the crystallization conditions, development of new approaches, etc., have been developed to overcome these obstacles. And, these achievements make prominent contributions to the topic of acceleration of the zeolite crystallization and promote the fundamental understanding of the zeolite formation mechanism. However, there is a lack of the comprehensive summary and analysis on them. Herein, we provide an overview of the recent achievements, highlight the significant progress in the past decades on the developments of novel and remarkable strategies to accelerate the crystallization of zeolites, and basically divide them into three main types, i.e., chemical methods, physical methods, and the derived new approaches. The principles/acceleration mechanisms, effectiveness, versatility, and degree of reality for the corresponding approaches are thoroughly discussed and summarized. Finally, the rational design of the prospective strategies for the fast synthesis of zeolites is commented on and envisioned. The information gathered here is expected to provide solid guidance for developing a more effective route to improve the zeolite crystallization and obtain the functional zeolite-based materials with more shortened durations and lowered cost and further promote their applications.

Implanting Colloidal Nanoparticles into Single-Crystalline Zeolites for Catalytic Dehydration

The encapsulation of functional colloidal nanoparticles (100 nm) into single-crystalline ZSM-5 zeolites, aiming to create uniform core-shell structures, is a highly sought-after yet formidable objective due to significant lattice mismatch and distinct crystallization properties. In this study, we demonstrate the fabrication of a core-shell structured single-crystal zeolite encompassing an Fe3O4 colloidal core via a novel confinement stepwise crystallization methodology. By engineering a confined nanocavity, anchoring nucleation sites, and executing stepwise crystallization, we have successfully encapsulated colloidal nanoparticles (CN) within single-crystal zeolites. These grafted sites, alongside the controlled crystallization process, compel the zeolite seed to nucleate and expand along the Fe3O4 colloidal nanoparticle surface, within a meticulously defined volume (1.5×107≤V≤1.3×108 nm3). Our strategy exhibits versatility and adaptability to an array of zeolites, including but not restricted to ZSM-5, NaA, ZSM-11, and TS-1 with polycrystalline zeolite shell. We highlight the uniformly structured magnetic-nucleus single-crystalline zeolite, which displays pronounced superparamagnetism (14 emu/g) and robust acidity (~0.83 mmol/g). This innovative material has been effectively utilized in a magnetically stabilized bed (MSB) reactor for the dehydration of ethanol, delivering an exceptional conversion rate (98 %), supreme ethylene selectivity (98 %), and superior catalytic endurance (in excess of 100 hours).

Disinfectant-Assisted Preparation of Hierarchical ZSM-5 Zeolite with Excellent Catalytic Stabilities in Propane Aromatization

A series of quaternary ammonium or phosphonium salts were applied as zeolite growth modifiers in the synthesis of hierarchical ZSM-5 zeolite. The results showed that the use of methyltriphenylphosphonium bromide (MTBBP) could yield nano-sized hierarchical ZSM-5 zeolite with a "rice crust" morphology feature, which demonstrates a better catalytic performance than other disinfect candidates. It was confirmed that the addition of MTBBP did not cause discernable adverse effects on the microstructures or acidities of ZSM-5, but it led to the creation of abundant meso- to marco- pores as a result of aligned tiny particle aggregations. Moreover, the generation of the special morphology was believed to be a result of the coordination and competition between MTBBP and Na+ cations. The as-synthesized hierarchical zeolite was loaded with Zn and utilized in the propane aromatization reaction, which displayed a prolonged lifetime (1430 min vs. 290 min compared with conventional ZSM-5) and an enhanced total turnover number that is four folds of the traditional one, owing to the attenuated hydride transfer reaction and slow coking rate. This work provides a new method to alter the morphological properties of zeolites with low-cost disinfectants, which is of great potential for industrial applications.

Microporosity and Catalytic Activity for Hydrodesulfurization of Pharmacosiderite Mo4P3O16 Synthesized at a Moderate Temperature

Pharmacosiderite Mo4P3O16 (Pharma-MoPO) consists of [Mo4O4] cubane unit and [PO4] tetrahedral to form an open framework with a microporous structure similar to that of LTA-type zeolite. Although attractive applications are expected due to its microporous structure and redox-active components, its physicochemical properties have been poorly investigated due to the specificity of its synthesis, which requires a high hydrothermal synthesis temperature of 360 °C. In this study, we succeeded in synthesizing Pharma-MoPO by hydrothermal synthesis at 230 °C, which can be applied using a commercially available autoclave by changing the metal source. Through the study of the solids and liquids obtained after hydrothermal syntheses, the formation process of Pharma-MoPO under our studied synthesis conditions was proposed. Advanced characterizations provided detailed structural information on Pharma-MoPO, including the location site of a countercation NH4+. Pharma-MoPO could adsorb CO2 with the amount close to the number of cages without removing NH4+. Pharma-MoPO exhibited stable catalytic activity for the hydrodesulfurization of thiophene while maintaining its crystal structure, except for the introduction of sulfide by replacing lattice oxygens. Pharmacosiderite Mo4P3O16 was successfully obtained by hydrothermal synthesis at a moderate temperature, and its microporosity for CO2 adsorption and catalytic properties for hydrodesulfurization were discovered.

Understanding Alkene Interaction with Metal-Modified Zeolites: Thermodynamics and Mechanism of Bonding in the π-Complex

Zeolites modified with metal cations are perspective catalysts for converting light alkenes to valuable chemicals. A crucial step of the transformation is an alkene interaction with zeolite to afford π-complex with metal cations. The mechanism of alkene bonding with cations is still unclear. To address this problem, propene adsorption on H+ (Bro̷nsted acid site), Na+, Ca2+, Zn2+, Co2+, Cu2+, Cu+, and Ag+ cationic sites in ZSM-5 zeolite has been studied by quantum chemical calculations in terms of adsorption enthalpy, νC═C frequency, and natural bond orbital (NBO) analysis together with natural energy decomposition analysis (NEDA). It is revealed that the conventional concept of σ- and π-bonding is only partially applicable to alkene interaction with metal cations in zeolites. The orbital interaction between an alkene molecule and a metal site is more complex. Several different bonding mechanisms have been identified depending on the nature and electron configuration of the metal cation. This finding explains the complex correlations observed for propene π-complex stability and νC═C frequency shift or charge transfer from the alkene molecule. The results provide the basis for further understanding the interactions between alkenes and inorganic solid Bro̷nsted and Lewis acids.

An alternative catalytic cycle for selective methane oxidation to methanol with Cu clusters in zeolites

The partial oxidation of methane to methanol catalyzed by Cu-exchanged zeolites involves at present a three-step procedure that requires changing reaction conditions along the catalytic cycle. In this work we present an alternative catalytic cycle for selective methane conversion to methanol using as active species small Cu5 clusters supported on CHA zeolite. Periodic DFT calculations show that molecular O2 is easily activated on Cu5 clusters producing bi-coordinated O atoms able to dissociate homolytically a CH bond from CH4 and to react with the radical-like non-adsorbed methyl intermediate formed producing methanol, while competitive overoxidation to CO2 is energetically disfavored. The present mechanistic study opens a new avenue to design catalytic materials based on their ability to stabilize radical species.

Unveiling the mechanisms of carboxylic acid esterification on acid zeolites for biomass-to-energy: A review of the catalytic process through experimental and computational studies

In recent years, there has been significant interest from industrial and academic areas in the esterification of carboxylic acids catalyzed by acidic zeolites, as it represents a sustainable and economically viable approach to producing a wide range of high-value-added products. However, there is a lack of comprehensive reviews that address the intricate reaction mechanisms occurring at the catalyst interface at both the experimental and atomistic levels. Therefore, in this review, we provide an overview of the esterification reaction on acidic zeolites based on experimental and theoretical studies. The combination of infrared spectroscopy with atomistic calculations and experimental strategies using modulation excitation spectroscopy techniques combined with phase-sensitive detection is presented as an approach to detecting short-lived intermediates at the interface of zeolitic frameworks under realistic reaction conditions. To achieve this goal, this review has been divided into four sections: The first is a brief introduction highlighting the distinctive features of this review. The second addresses questions about the topology and activity of different zeolitic systems, since these properties are closely correlated in the esterification process. The third section deals with the mechanisms proposed in the literature. The fourth section presents advances in IR techniques and theoretical calculations that can be applied to gain new insights into reaction mechanisms. Finally, this review concludes with a subtle approach, highlighting the main aspects and perspectives of combining experimental and theoretical techniques to elucidate different reaction mechanisms in zeolitic systems.

Activation and Transformation of Methane on Boron-Doped Cobalt Oxide Cluster Cations CoBO2. Inorg Chem 2024;63:1537-1542. [PMID: 38181068 DOI: 10.1021/acs.inorgchem.3c03112] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

The cleavage of inert C-H bonds in methane at room temperature and the subsequent conversion into value-added products are quite challenging. Herein, the reactivity of boron-doped cobalt oxide cluster cations CoBO2+ toward methane under thermal collision conditions was studied by mass spectrometry experiments and quantum-chemical calculations. In this reaction, one H atom and the CH3 unit of methane were transformed separately to generate the product metaboric acid (HBO2) and one CoCH3+ ion, respectively. Theoretical calculations strongly suggest that a catalytic cycle can be completed by the recovery of CoBO2+ through the reaction of CoCH3+ with sodium perborate (NaBO3), and this reaction generates sodium methoxide (CH3ONa) as the other value-added product. This study shows that boron-doped cobalt oxide species are highly reactive to facilitate thermal methane transformation and may open a way to develop more effective approaches for methane (CH4) activation and conversion under mild conditions.

Effect of Framework Composition and NH3 on the Diffusion of Cu+ in Cu-CHA Catalysts Predicted by Machine-Learning Accelerated Molecular Dynamics

Cu-exchanged zeolites rely on mobile solvated Cu+ cations for their catalytic activity, but the role of the framework composition in transport is not fully understood. Ab initio molecular dynamics simulations can provide quantitative atomistic insight but are too computationally expensive to explore large length and time scales or diverse compositions. We report a machine-learning interatomic potential that accurately reproduces ab initio results and effectively generalizes to allow multinanosecond simulations of large supercells and diverse chemical compositions. Biased and unbiased simulations of [Cu(NH3)2]+ mobility show that aluminum pairing in eight-membered rings accelerates local hopping and demonstrate that increased NH3 concentration enhances long-range diffusion. The probability of finding two [Cu(NH3)2]+ complexes in the same cage, which is key for SCR-NOx reaction, increases with Cu content and Al content but does not correlate with the long-range mobility of Cu+. Supporting experimental evidence was obtained from reactivity tests of Cu-CHA catalysts with a controlled chemical composition.

Dehydroaromatization of Indolines and Cyclohexanones with Thiol Access to Aryl Sulfides under Basic Conditions

Aryl sulfides are common and ubiquitous motifs in natural products and pharmaceuticals. Presented herein is the first example of the synthesis of diaryl sulfide derivatives via dehydroaromatization under simple basic conditions. Dehydroaromatization reactions between indolines or cyclohexanones with aryl thiols are performed in an environmentally benign manner by the use of air (molecular oxygen) as the oxidant, with producing water as the only byproduct. The methodology provides a simple and practical route to diaryl sulfides with wide functional groups in good to excellent yields. Preliminary mechanistic studies suggest that a radical process is involved in the transformation.

Approaching enzymatic catalysis with zeolites or how to select one reaction mechanism competing with others

Approaching the level of molecular recognition of enzymes with solid catalysts is a challenging goal, achieved in this work for the competing transalkylation and disproportionation of diethylbenzene catalyzed by acid zeolites. The key diaryl intermediates for the two competing reactions only differ in the number of ethyl substituents in the aromatic rings, and therefore finding a selective zeolite able to recognize this subtle difference requires an accurate balance of the stabilization of reaction intermediates and transition states inside the zeolite microporous voids. In this work we present a computational methodology that, by combining a fast high-throughput screeening of all zeolite structures able to stabilize the key intermediates with a more computationally demanding mechanistic study only on the most promising candidates, guides the selection of the zeolite structures to be synthesized. The methodology presented is validated experimentally and allows to go beyond the conventional criteria of zeolite shape-selectivity.

Molecular Views on Mechanisms of Brønsted Acid-Catalyzed Reactions in Zeolites

The Brønsted acidity of proton-exchanged zeolites has historically led to the most impactful applications of these materials in heterogeneous catalysis, mainly in the fields of transformations of hydrocarbons and oxygenates. Unravelling the mechanisms at the atomic scale of these transformations has been the object of tremendous efforts in the last decades. Such investigations have extended our fundamental knowledge about the respective roles of acidity and confinement in the catalytic properties of proton exchanged zeolites. The emerging concepts are of general relevance at the crossroad of heterogeneous catalysis and molecular chemistry. In the present review, emphasis is given to molecular views on the mechanism of generic transformations catalyzed by Brønsted acid sites of zeolites, combining the information gained from advanced kinetic analysis, in situ, and operando spectroscopies, and quantum chemistry calculations. After reviewing the current knowledge on the nature of the Brønsted acid sites themselves, and the key parameters in catalysis by zeolites, a focus is made on reactions undergone by alkenes, alkanes, aromatic molecules, alcohols, and polyhydroxy molecules. Elementary events of C-C, C-H, and C-O bond breaking and formation are at the core of these reactions. Outlooks are given to take up the future challenges in the field, aiming at getting ever more accurate views on these mechanisms, and as the ultimate goal, to provide rational tools for the design of improved zeolite-based Brønsted acid catalysts.

Methane Oxidation over the Zeolites-Based Catalysts

Zeolites have ordered pore structures, good spatial constraints, and superior hydrothermal stability. In addition, the active metal elements inside and outside the zeolite framework provide the porous material with adjustable acid–base property and good redox performance. Thus, zeolites-based catalysts are more and more widely used in chemical industries. Combining the advantages of zeolites and active metal components, the zeolites-based materials are used to catalyze the oxidation of methane to produce various products, such as carbon dioxide, methanol, formaldehyde, formic acid, acetic acid, and etc. This multifunction, high selectivity, and good activity are the key factors that enable the zeolites-based catalysts to be used for methane activation and conversion. In this review article, we briefly introduce and discuss the effect of zeolite materials on the activation of C–H bonds in methane and the reaction mechanisms of complete methane oxidation and selective methane oxidation. Pd/zeolite is used for the complete oxidation of methane to carbon dioxide and water, and Fe- and Cu-zeolite catalysts are used for the partial oxidation of methane to methanol, formaldehyde, formic acid, and etc. The prospects and challenges of zeolite-based catalysts in the future research work and practical applications are also envisioned. We hope that the outcome of this review can stimulate more researchers to develop more effective zeolite-based catalysts for the complete or selective oxidation of methane.

Advanced zeolite and ordered mesoporous silica-based catalysts for the conversion of CO2 to chemicals and fuels

For many years, capturing, storing or sequestering CO₂ from concentrated emission sources or from air has been a powerful technique for reducing atmospheric CO₂. Moreover, the use of CO₂ as a C1 building block to mitigate CO₂ emissions and, at the same time, produce sustainable chemicals or fuels is a challenging and promising alternative to meet global demand for chemicals and energy. Hence, the chemical incorporation and conversion of CO₂ into valuable chemicals has received much attention in the last decade, since CO₂ is an abundant, inexpensive, nontoxic, nonflammable, and renewable one-carbon building block. Nevertheless, CO₂ is the most oxidized form of carbon, thermodynamically the most stable form and kinetically inert. Consequently, the chemical conversion of CO₂ requires highly reactive, rich-energy substrates, highly stable products to be formed or harder reaction conditions. The use of catalysts constitutes an important tool in the development of sustainable chemistry, since catalysts increase the rate of the reaction without modifying the overall standard Gibbs energy in the reaction. Therefore, special attention has been paid to catalysis, and in particular to heterogeneous catalysis because of its environmentally friendly and recyclable nature attributed to simple separation and recovery, as well as its applicability to continuous reactor operations. Focusing on heterogeneous catalysts, we decided to center on zeolite and ordered mesoporous materials due to their high thermal and chemical stability and versatility, which make them good candidates for the design and development of catalysts for CO₂ conversion. In the present review, we analyze the state of the art in the last 25 years and the potential opportunities for using zeolite and OMS (ordered mesoporous silica) based materials to convert CO₂ into valuable chemicals essential for our daily lives and fuels, and to pave the way towards reducing carbon footprint. In this review, we have compiled, to the best of our knowledge, the different reactions involving catalysts based on zeolites and OMS to convert CO₂ into cyclic and dialkyl carbonates, acyclic carbamates, 2-oxazolidones, carboxylic acids, methanol, dimethylether, methane, higher alcohols (C₂₊OH), C₂₊ (gasoline, olefins and aromatics), syngas (RWGS, dry reforming of methane and alcohols), olefins (oxidative dehydrogenation of alkanes) and simple fuels by photoreduction. The use of advanced zeolite and OMS-based materials, and the development of new processes and technologies should provide a new impulse to boost the conversion of CO₂ into chemicals and fuels.

Steering the Metal Precursor Location in Pd/Zeotype Catalysts and Its Implications for Catalysis

Bifunctional catalysts containing a dehydrogenation–hydrogenation function and an acidic function are widely applied for the hydroconversion of hydrocarbon feedstocks obtained from both fossil and renewable resources. It is well known that the distance between the two functionalities is important for the performance of the catalyst. In this study, we show that the heat treatment of the catalyst precursor can be used to steer the location of the Pd precursor with respect to the acid sites in SAPO-11 and ZSM-22 zeotype materials when ions are exchanged with Pd(NH3)4(NO3)2. Two sets of catalysts were prepared based on composite materials of alumina with either SAPO-11 or ZSM-22. Pd was placed on/in the zeotype, followed by a calcination-reduction (CR) or direct reduction (DR) treatment. Furthermore, catalysts with Pd on the alumina binder were prepared. CR results in having more Pd nanoparticles inside the zeotype crystals, whereas DR yields more particles on the outer surface of the zeotype crystals as is confirmed using HAADF-STEM and XPS measurements. The catalytic performance in both n-heptane and n-hexadecane hydroconversion of the catalysts shows that having the Pd nanoparticles on the alumina binder is most beneficial for maximizing the isomer yields. Pd-on-zeotype catalysts prepared using the DR approach show intermediate performances, outperforming their Pd-in-zeotype counterparts that were prepared with the CR approach.

Influence of the zeolite support on the catalytic properties of confined metal clusters: a periodic DFT study of O2 dissociation on Cun clusters in CHA

The catalytic properties of sub-nanometer Cu_n clusters are modified by interactions with inorganic supports used for their stabilization. In this work, the reactivity towards O₂ dissociation of Cu₅ and Cu₇ clusters confined within the cavities of the CHA zeolite is theoretically investigated by means of periodic DFT calculations. Increasing the Al content in the zeolite framework not only modifies the cluster morphology, but also leads to a decrease in the electronic density available on the supported Cu_n clusters, which in turn leads to higher activation energies for O₂ dissociation. Together with the cluster size and shape, the Si/Al ratio in the zeolite support appears as a potential parameter to finely tune the stability and oxidation properties of Cu-based catalysts.

Recent Insights into Cu-Based Catalytic Sites for the Direct Conversion of Methane to Methanol

Direct conversion of methane to methanol is an effective and practical process to improve the efficiency of natural gas utilization. Copper (Cu)-based catalysts have attracted great research attention, due to their unique ability to selectively catalyze the partial oxidation of methane to methanol at relatively low temperatures. In recent decades, many different catalysts have been studied to achieve a high conversion of methane to methanol, including the Cu-based enzymes, Cu-zeolites, Cu-MOFs (metal-organic frameworks) and Cu-oxides. In this mini review, we will detail the obtained evidence on the exact state of the active Cu sites on these various catalysts, which have arisen from the most recently developed techniques and the results of DFT calculations. We aim to establish the structure–performance relationship in terms of the properties of these materials and their catalytic functionalities, and also discuss the unresolved questions in the direct conversion of methane to methanol reactions. Finally, we hope to offer some suggestions and strategies for guiding the practical applications regarding the catalyst design and engineering for a high methanol yield in the methane oxidation reaction.

Fluoride-free synthesis of high-silica CHA-type aluminosilicates by seed-assisted aging treatment for starting gel

High-silica CHA-type aluminosilicates (Si/Al molar ratio >100) were synthesized hydrothermally in the absence of fluoride media, where the seed-assisted aging treatment played an important role on the crystallization. These aluminosilicates showed a long catalytic lifetime with high selectivity toward lower olefins in the methanol-to-olefins reaction.

Tandem Reactions over Zeolite-Based Catalysts in Syngas Conversion

Syngas conversion can play a vital role in providing energy and chemical supplies while meeting environmental requirements as the world gradually shifts toward a net-zero. While prospects of this process cannot be doubted, there is a lingering challenge in distinct product selectivity over the bulk transitional metal catalysts. To advance research in this respect, composite catalysts comprising traditional metal catalysts and zeolites have been deployed to distinct product selectivity while suppressing side reactions. Zeolites are common but highly efficient materials used in the chemical industry for hydroprocessing. Combining the advantages of zeolites and some transition metal catalysts has promoted the catalytic production of various hydrocarbons (e.g., light olefins, aromatics, and liquid fuels) and oxygenates (e.g., methanol, dimethyl ether, formic acid, and higher alcohols) from syngas. In this outlook, a thorough revelation on recent progress in syngas conversion to various products over metal-zeolite composite catalysts is validated. The strategies adopted to couple the metal species and zeolite material into a composite as well as the consequential morphologies for specific product selectivity are highlighted. The key zeolite descriptors that influence catalytic performance, such as framework topologies, proximity and confinement effects, acidities and cations, pore systems, and particle sizes are discussed to provide a deep understanding of the significance of zeolites in syngas conversion. Finally, an outlook regarding challenges and opportunities for syngas conversion using zeolite-based catalysts to meet emerging energy and environmental demands is also presented.

Sub-nanometer Copper Clusters as Alternative Catalysts for the Selective Oxidation of Methane to Methanol with Molecular O2

The partial oxidation of methane to methanol with molecular O₂ at mild reaction conditions is a challenging process, which is efficiently catalyzed in nature by enzymes. As an alternative to the extensively studied Cu-exchanged zeolites, small copper clusters composed by just a few atoms appear as potential specific catalysts for this transformation. Following previous work in our group that established that the reactivity of oxygen atoms adsorbed on copper clusters is closely linked to cluster size and morphology, we explore by means of DFT calculations the ability of bidimensional (2D) and three-dimensional (3D) Cu₅ and Cu₇ clusters to oxidize partially methane to methanol. A highly selective Eley-Rideal pathway involving homolytic C-H bond dissociation and a non-adsorbed radical-like methyl intermediate is favored when bicoordinated oxygen atoms, preferentially stabilized at the edges of 2D clusters, are available. Cluster morphology arises as a key parameter determining the nature and reactivity of adsorbed oxygen atoms, opening the possibility to design efficient catalysts for partial methane oxidation based on copper clusters.

Modification of the Acidic and Textural Properties of HY Zeolite by AHFS Treatment and Its Coke Formation Performance in the Catalytic Cracking Reaction of N-Butene

Coke formation on n-butene cracking catalyst is the main reason for the reducing of its lifetime. To study the effects of acidity and textural properties on the coke formation process, a series of HY zeolite-type catalysts were prepared by ammonium hexafluorosilicate treatment (AHFS). NH3-TPD and Py-IR-TPD were used to systematically study the change law of zeolite acidity. It was found that with the increase of AHFS concentration, the acid density decreased, whereas the ratio of Brønsted acid to Lewis acid first increased and then decreased. Meanwhile, the percentage of Brønsted acid inside the supper cages increased and the strength of Brønsted acid increased with the degree of dealumination. Combined with in situ IR study on coke formation, the relationship between coking and acid site was revealed. It was found that the rate of coke formation on zeolites was affected by acid density, which is the rate of coke formation decreased with the decline of acid density. When the acid density remains at the same level, it was the acid strength that determined the coke formation rate—the stronger the acid strength, the faster the coke formation rate.

Machine learning potential era of zeolite simulation

Zeolites, owing to their great variety and complexity in structure and wide applications in chemistry, have long been the hot topic in chemical research. This perspective first presents a short retrospect of theoretical investigations on zeolites using the tools from classical force fields to quantum mechanics calculations and to the latest machine learning (ML) potential simulations. ML potentials as the next-generation technique for atomic simulation open new avenues to simulate and interpret zeolite systems and thus hold great promise for finally predicting the structure-functionality relation of zeolites. Recent advances using ML potentials are then summarized from two main aspects: the origin of zeolite stability and the mechanism of zeolite-related catalytic reactions. We also discussed the possible scenarios of ML potential application aiming to provide instantaneous and easy access of zeolite properties. These advanced applications could now be accomplished by combining cloud-computing-based techniques with ML potential-based atomic simulations. The future development of ML potentials for zeolites in the respects of improving the calculation accuracy, expanding the application scope and constructing the zeolite-related datasets is finally outlooked.

Minute-Scale Synthesis of Nano Silicalite-1 Zeolites

Synthesis of zeolites in more efficient and greener methods is of great significance in both industrial and academic fields. However, the relative long time for zeolite crystallization and much consumption of water solvent make the target challengeable. Herein, a route for ultrafast synthesis of nano Silicalite-1 zeolites in 10 min with much less water consumption has been developed. Comprehensive characterizations, i.e., X-ray powder diffraction, N₂ sorption, scanning electron microscope, and NMR, confirm the high quality of such obtained Silicalite-1 zeolites. In the catalytic deoxygenation of O₂-containing ethylene (mixture of O₂ and ethylene), these reported Silicalite-1 zeolite samples show the comparable performance with the conventional Silicalite-1 zeolites synthesized under hydrothermal conditions. This research therefore provides a new trial toward the ultrafast synthesis of zeolite materials in an environment-friendly route.

Highly Enhanced Aromatics Selectivity by Coupling of Chloromethane and Carbon Monoxide over H-ZSM-5

The transformation of methane into high value-added chemicals such as aromatics provides a more desired approach towards sustainable chemistry but remains a critical challenge due to the low selectivity of aromatics and poor stability. Herein, we first report a coupling reaction of CH₃ Cl and CO (CCTA) based on methane conversion, which achieves extremely high aromatics selectivity (82.2 %) with the selectivity of BTX up to ca. 60 % over HZSM-5. The promoting effects have been demonstrated on other zeolites especially 10-membered rings (10 MR) zeolites. Multiple characterizations show that 2,3-dimethyl-2-cyclopentene-1-one (DMCPO) is generated from acetyl groups and olefins. Furthermore, isotopic labeling analysis confirms that CO is inserted into the DMCPO and aromatics rings. A new aromatization mechanism is proposed, including the formation of the above intermediates, which conspicuously weakens the hydrogen transfer reaction, leading to a considerable increase of aromatics selectivity and a dramatic drop in alkanes.

Clarification of acid site location in MSE-type zeolites by spectroscopic approaches combined with catalytic activity: comparison between UZM-35 and MCM-68

MSE-type zeolites synthesized by different organic structure-directing agents (OSDAs), UZM-35 and MCM-68, were prepared. The location of Brønsted acid sites derived from the framework Al atoms and acidic properties were investigated based on ²⁷Al MQMAS NMR and in situ IR techniques combined with the evaluation of the catalytic activity. We have successfully found a significant difference in the location of Brønsted acid sites in the MSE-type framework; 61 and 33% of acid sites were located at the 12-ring channel for MCM-68 and UZM-35, respectively. The differences in the location of the acid sites yielded their unique catalytic activities for the hydrocarbon cracking reactions, indicating that a well-chosen type of OSDAs for the synthesis is one of the possibilities for controlling the distribution of the framework Al atoms in the MSE-type framework.

Boosting propane dehydroaromatization by confining PtZn alloy nanoparticles within H-ZSM-5 crystals

A Pt–Zn@H-ZSM-5 catalyst with Pt–Zn alloy nanoparticles confined in H-ZSM-5 crystals exhibits a significantly improved performance in the propane dehydroaromatization reaction.

Redox induced controlling microporosity of zeolitic transition metal oxides based on ε‑Keggin ironmolybdate in an ultra-fine level

Tuning microporosity of crystalline microporous materials is critical for achieving good application performance. Zeolitic ironmolybdate shows both redox property and microporosity, and a redox-triggered microporosity change is investigated. The micropore...

Enhancing Methane Conversion by Modification of Zn States in Co-Reaction of MTA

Limited by harsh reaction conditions, the activation and utilization of methane were regarded as holy grail reaction. Co-reaction with methanol, successfully realizing mild conversion below 450 °C, provides practical strategies for methane conversion on metal-loaded ZSM-5 zeolites, especially for highly efficient Zn loaded ones. However, Zn species, regarded as active acid sites on the zeolite, have not been sufficiently studied. In this paper, Zn-loaded ZSM-5 zeolite was prepared, and Zn was modified by capacity, loading strategy, and treating atmosphere. Apparent methane conversion achieves 15.3% for 1.0Zn/Z-H2 (16.8% as calculated net conversion) with a significantly reduced loading of 1.0 wt.% against deactivation, which is among the best within related zeolite materials. Besides, compared to the MTA reaction, the addition of methane promotes the high-valued aromatic production from 49.4% to 54.8%, and inhibits the C10+ production from 7.8% to 3.6%. Notably, Zn2+ is found to be another active site different from the reported ZnOH+. Medium strong acid sites are proved to be beneficial for methane activation. This work provides suggestions for the modification of the Zn active site, in order to prepare highly efficient catalysts for methane activation and BTX production in co-reaction with methanol.

Activation and catalytic transformation of methane under mild conditions

In the last few decades, worldwide scientists have been motivated by the promising production of chemicals from the widely existing methane (CH₄) under mild conditions for both chemical synthesis with low energy consumption and climate remediation. To achieve this goal, a whole library of catalytic chemistries of transforming CH₄ to various products under mild conditions is required to be developed. Worldwide scientists have made significant efforts to reach this goal. These significant efforts have demonstrated the feasibility of oxidation of CH₄ to value-added intermediate compounds including but not limited to CH₃OH, HCHO, HCOOH, and CH₃COOH under mild conditions. The fundamental understanding of these chemical and catalytic transformations of CH₄ under mild conditions have been achieved to some extent, although currently neither a catalyst nor a catalytic process can be used for chemical production under mild conditions at a large scale. In the academic community, over ten different reactions have been developed for converting CH₄ to different types of oxygenates under mild conditions in terms of a relatively low activation or catalysis temperature. However, there is still a lack of a molecular-level understanding of the activation and catalysis processes performed in extremely complex reaction environments under mild conditions. This article reviewed the fundamental understanding of these activation and catalysis achieved so far. Different oxidative activations of CH₄ or catalytic transformations toward chemical production under mild conditions were reviewed in parallel, by which the trend of developing catalysts for a specific reaction was identified and insights into the design of these catalysts were gained. As a whole, this review focused on discussing profound insights gained through endeavors of scientists in this field. It aimed to present a relatively complete picture for the activation and catalytic transformations of CH₄ to chemicals under mild conditions. Finally, suggestions of potential explorations for the production of chemicals from CH₄ under mild conditions were made. The facing challenges to achieve high yield of ideal products were highlighted and possible solutions to tackle them were briefly proposed.

Methane Activation by the Heteronuclear Cluster [TiAlO4]+: Direct Hydrogen Abstraction by a Nonradical Oxygen

The gas-phase reactions of [TiAlO₄]⁺ with methane have been explored by using FT-ICR mass spectrometry complemented by quantum chemical calculations. Interestingly, the [TiAlO₄]⁺ ions can activate two methane molecules continuously. Moreover, in contrast to the previous reports on gas-phase methane activation by metal oxide clusters, in which hydrogen-atom transfer and/or proton-coupled electron transfer prevail, a hydride transfer process dominates the [TiAlO₄]⁺/CH₄ system. The associated electronic origins have been discussed, and such a terminal metal-oxo active center as addressed in the [TiAlO₄]⁺ cluster has proven to be promising in the construction of efficient catalysts concerning methane conversion.