Enzymatic preparation of diacylglycerols: lipase screening, immobilization, characterization and glycerolysis performance

BACKGROUNDS

Glycerolysis, with its advantages of readily available raw materials, simple operation, and mild reaction conditions, is a primary method for producing diacylglycerol (DAG). However, enzymatic glycerolysis faces challenges such as high enzyme costs, low reuse efficiency, and poor stability. The study aims to develop a cost-effective immobilized enzyme by covalently binding lipase to pre-activated carriers through the selection of suitable lipases, carriers, and activating agents. The optimization is intended to improve the glycerolysis reaction for efficient DAG production.

RESULTS

Lipase CN-TL (from Thermomyces lanuginosus) was selected through glycerolysis reaction and molecular docking to catalyze the glycerolysis reaction. Optimizing the immobilization method by covalently binding CN-TL to poly(ethylene glycol) diglycidyl ether (PEGDGE)-preactivated resin LX-201A resulted in the preparation of the immobilized enzyme TL-PEGDGE-LX. The immobilized enzyme retained over 90% of its initial activity after five consecutive reactions, demonstrating excellent reusability. The DAG content in the product remained at 84.8% of its initial level, further highlighting the enzyme's potential for reusability and its promising applications in the food and oil industries.

CONCLUSIONS

The immobilized lipase TL-PEGDGE-LX, created by covalently immobilizing lipase CN-TL on PEGDGE-preactivated carriers, demonstrated broad applicability and excellent reusability. This approach offers an economical and convenient immobilization strategy for the enzymatic glycerolysis production of DAG. © 2024 Society of Chemical Industry.

Thermoascus aurantiacus harbors an esterase/lipase that is highly activated by anionic surfactant

Fungal lipolytic enzymes play crucial roles in various lipid bio-industry processes. Here, we elucidated the biochemical and structural characteristics of an unexplored fungal lipolytic enzyme (TaLip) from Thermoascus aurantiacus var. levisporus, a strain renowned for its significant industrial relevance in carbohydrate-active enzyme production. TaLip belongs to a poorly understood phylogenetic branch within the class 3 lipase family and prefers to hydrolyze mainly short-chain esters. Nonetheless, it also displays activity against natural long-chain triacylglycerols. Furthermore, our analyses revealed that the surfactant sodium dodecyl sulfate (SDS) enhances the hydrolytic activity of TaLip on pNP butyrate by up to 5.0-fold. Biophysical studies suggest that interactions with SDS may prevent TaLip aggregation, thereby preserving the integrity and stability of its monomeric form and improving its performance. These findings highlight the resilience of TaLip as a lipolytic enzyme capable of functioning in tandem with surfactants, offering an intriguing enzymatic model for further exploration of surfactant tolerance and activation in biotechnological applications.

Ionic Liquid-Mediated Dynamic Polymerization for Facile Aqueous-Phase Synthesis of Enzyme-Covalent Organic Framework Biocatalysts

Utilizing covalent organic framework (COF) as a hypotoxic and porous scaffold to encapsulate enzyme (enzyme@COF) has inspired numerous interests at the intersection of chemistry, materials, and biological science. In this study, we report a convenient scheme for one-step, aqueous-phase synthesis of highly crystalline enzyme@COF biocatalysts. This facile approach relies on an ionic liquid (2 μL of imidazolium ionic liquid)-mediated dynamic polymerization mechanism, which can facilitate the in situ assembly of enzyme@COF under mild conditions. This green strategy is adaptive to synthesize different biocatalysts with highly crystalline COF "exoskeleton", as well evidenced by the low-dose cryo-EM and other characterizations. Attributing to the rigorous sieving effect of crystalline COF pore, the hosted lipase shows non-native selectivity for aliphatic acid hydrolysis. In addition, the highly crystalline linkage affords COF "exoskeleton" with higher photocatalytic activity for in situ production of H2 O2 , enabling us to construct a self-cascading photo-enzyme coupled reactor for pollutants degradation, with a 2.63-fold degradation rate as the poorly crystalline photo-enzyme reactor. This work showcases the great potentials of employing green and trace amounts of ionic liquid for one-step synthesis of crystalline enzyme@COF biocatalysts, and emphasizes the feasibility of diversifying enzyme functions by integrating the reticular chemistry of a COF.

Solvent-free synthesis of hydrophobic and amphiphilic esters using a chemically modified lipase from Thermomyces lanuginosus: a comparative study with native and immobilized forms

Using lipases to catalyze the synthesis of the most differentiated type of compounds remains one of the major challenges among scientists. Seeking more economic and advantageous catalysts is a current goal of green chemistry. In this work, we demonstrate the potential of a chemically modified form of lipase from Thermomyces lanuginosus (cmLTL) for the synthesis of both hydrophobic (heptyl heptanoate, heptyl octanoate, heptyl decanoate, decyl heptanoate, decyl octanoate and decyl decanoate) and amphiphilic (2-(2-ethoxyethoxy)ethyl oleate and 2-(2-ethoxyethoxy)ethyl linoleate) esters, in bulk. The results were compared with its native (LTL) and immobilized (imLTL) forms. The data revealed that LTL showed poor activity for all reactions performed with n-heptane (η<20 %). ImLTL was able to synthesize all hydrophobic esters (η>60 %), with exception of the short ester, heptyl heptanoate. cmLTL was the only form of LTL capable of producing hydrophobic and amphiphilic esters, without compromising the yield when the reactions were performed under solvent-free conditions (>50 %). Molecular modeling showed that the active pocket of cmLTL is able to deeply internalize transcutol, with stronger interactions, justifying the outstanding results obtained. Furthermore, owing to the possibility of cmLTL filtration, the reusability of the catalyst is ensured for at least 6 cycles, without compromising the reaction yields.

Overexpression and truncation of a novel cold-adapted lipase with improved enzymatic characteristics

The novel cold-adapted lipase (Lip ZC12) derived from Psychrobacter sp. ZY124 exhibited higher catalytic activity at 20-40 °C, the whole gene was then sequenced, analyzed, and overexpressed. However, its intrinsic structural characteristics lead to a decreased affinity toward the substrate, thus limiting the improvement of catalytic efficiency. Modeling the homologous structure and simulating the binding process of Lip ZC12 with the substrate. It was found that truncated lid (lip-Δlid) could not only increase the kcat, but also significantly enhance the substrate affinity, the substrate affinity and catalytic efficiency of Lip ZC12 modified by lid truncation were significantly improved. The results revealed that the kcat/Km value of lip-Δlid was 1.6 times higher than that of free lipase. This improved catalytic performance of cold-adapted lipase, and these findings laid an important foundation for further application.

Sustainable Immobilization of β-Glucosidase onto Silver Ions and AgNPs-Loaded Acrylic Fabric with Enhanced Stability and Reusability

Modified polymer design has attracted significant attention for enzyme immobilization, offering promising applications. In this study, amine-terminated polymers were synthesized by incorporating functional groups into polyacrylonitrile using hexamethylenediamine. This work highlights the successful enzyme immobilization strategy using modified polymers, offering improved stability and expanded operational conditions for potential biotechnological applications. The resulting amino groups were utilized to capture silver ions, which were subsequently converted to silver nanoparticles (AgNPs). The obtained materials, AgNPs@TA-HMDA (acrylic textiles coated silver nanoparticles AgNPs) and Ag(I)@TA-HMDA (acrylic textiles coated with Ag ion) were employed as supports for β-glucosidase enzyme immobilization. The highest immobilization yields (IY%) were achieved with AgNPs@TA-HMDA at 92%, followed by Ag(I)@TA-HMDA at 79.8%, resulting in activity yields (AY%) of 81% and 73%, respectively. Characterization techniques such as FTIR, FE-SEM, EDX, TG/DTG, DSC, and zeta potential were employed to investigate the structural composition, surface morphologies, elemental composition, thermal properties, and surface charge of the support materials. After 15 reuses, the preservation percentages decreased to 76% for AgNPs@TA-HMDA/β-Glu and 65% for Ag(I)@TA-HMDA/β-Glu. Storage stability revealed that the decrease in activity for the immobilized enzymes was smaller than the free enzyme. The optimal pH for the immobilized enzymes was broader (pH 5.5 to 6.5) compared to the free enzyme (pH 5.0), and the optimal temperature for the immobilized enzymes was 60 °C, slightly higher than the free enzyme's optimal temperature of 50 °C. The kinetic analysis showed a slight increase in Michaelis constant (Km) values for the immobilized enzymes and a decrease in maximum velocity (Vmax), turnover number (Kcat), and specificity constant (Kcat/Km) values compared to the free enzyme. Through extensive characterization, we gained valuable insights into the structural composition and properties of the modified polymer supports. This research significantly contributes to the development of efficient biotechnological processes by advancing the field of enzyme immobilization and offering valuable knowledge for its potential applications.

Deep Eutectic Solvents as Suitable Solvents for Lipase-Catalyzed Transesterification Reactions

In this work, three deep eutectic mixtures (DES 1: choline chloride/urea; DES 2: choline chloride/glycerol; and DES 3: tetrabutylammonium bromide/imidazole) were investigated as mediums for the synthesis of glucose laurate and glucose acetate. Aiming to achieve a greener and more sustainable approach, the synthesis reactions were catalyzed by lipases from Aspergillus oryzae (LAO), Candida rugosa (LCR), and porcine pancreas (LPP). The hydrolytic activity of lipases against p-nitrophenyl hexanoate revealed no evidence of enzyme inactivation when DES were used as medium. Regarding the transesterification reactions, combining LAO or LCR with DES 3 resulted in the efficient production of glucose laurate (from glucose and vinyl laurate) (conversion >60 %). The best result for LPP was observed in DES 2, with 98 % of product production after 24 hours of reaction. When replacing vinyl laurate by a smaller hydrophilic substrate, vinyl acetate, a distinct behavior was observed. LCR and LPP performed better in DES 1, yielding more than 80 % of glucose acetate after 48 hours of reaction. The catalytic activity of LAO was less pronounced, reaching only nearly 40 % of product in DES 3. The results highlight the potential of combining biocatalysis with greener and environmentally-safer solvents, for the synthesis of differentiated chain-length sugar fatty acid esters (SFAE).

Degradation of ochratoxins A and B by lipases: A kinetic study unraveled by molecular modeling

Mycotoxins are toxic substances produced by fungi and, frequently, different mycotoxins cooccur in food commodities. Ochratoxin A (OTA) and Ochratoxin B (OTB) may co-occur in a variety of foods, like red wines and wheat, presenting a significant risk of population exposure. In this study, we investigated the potential of five lipases (Candida rugosa Lipase, Candida antarctica B Lipase, Thermomyces lanuginosus Lipase, Amano Lipase A from Aspergillus niger (ANL) and Porcine Pancreas Lipase (PPL)) to hydrolyze OTA and OTB into non-hazardous products. Only ANL and PPL degraded both substrates, however, with varying degrees of efficiency. PPL completely degraded OTB (9 h), but only 43% of OTA (25 h). Molecular simulations indicated a high binding energy of OTA to PPL, that can be explained by the impact of the chlorine group, impairing hydrolysis. ANL was able to completely degrade both mycotoxins, OTA in 3 h and OTB in 10 h. The ANL enzyme showed also high specificity to OTA, however, the activity of this enzyme is not affected by chlorine and hydrolyzes OTA faster than OTB. These two enzymes were found to be able to detoxify co-occurring ochratoxins A and B, making isolated enzymes an alternative to the direct use of microorganisms for mycotoxin mitigation in food.

Lipase-Catalysed Polymerization of Eutectic Mixtures

Aiming to reduce the toxicity and operational costs often associated to chemical processes, the enzymatic synthesis is applied herein as a sustainable route for producing polyesters. The use of NADES' (Natural Deep Eutectic Solvents) components as a source of monomers for the synthesis of polymers through lipase-catalyzed esterification in an anhydrous medium is detailed for the first time. Three NADES composed by glycerol and an organic base, or acid, were used to produce polyesters, through polymerization reactions catalyzed by Aspergillus oryzae lipase. High polyester conversion rates (above 70 %), containing at least 20 monomeric units (glycerol:organic acid/base (1 : 1)), were observed by matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) analysis. The NADES monomers' capacity for polymerization, along with their non-toxicity, cheap cost, and simplicity of production, sets up these solvents as a greener and cleaner approach for the synthesis of high value-added products.

Chemoenzymatic Synthesis of Optically Active Ethereal Analog of iso-Moramide-A Novel Potentially Powerful Analgesic †

To develop potent and safer analgesics, we designed and synthesized a novel enantiomerically enriched ethereal analog of (R)-iso-moramide, namely 2-[(2R)-2-(morpholin-4-yl)propoxy]-2,2-diphenyl-1-(pyrrolidin-1-yl)ethan-1-one. The titled active agent can potentially serve as a powerful synthetic opiate with an improved affinity and selectivity toward opioid receptors (ORs). This hypothesis was postulated based on docking studies regarding the respective complexes between the designed ligand and µ-OR, δ-OR, and κ-OR. The key step of the elaborated asymmetric synthesis of novel analog involves lipase-catalyzed kinetic resolution of racemic 1-(morpholin-4-yl)propan-2-ol, which was accomplished on a 10 g scale via an enantioselective transesterification employing vinyl acetate as an irreversible acyl donor in tert-butyl methyl ether (MTBE) as the co-solvent. Next, the obtained homochiral (S)-(+)-morpholino-alcohol (>99% ee) was functionalized into corresponding chloro-derivative using thionyl chloride (SOCl2) or the Appel reaction conditions. Further transformation with N-diphenylacetyl-1-pyrrolidine under phase-transfer catalysis (PTC) conditions using O2-saturated DMSO/NaOH mixture as an oxidant furnished the desired levorotatory isomer of the title product isolated in 26% total yield after three steps, and with 89% ee. The absolute configuration of the key-intermediate of (R)-(−)-iso-moramide was determined using a modified form of Mosher’s methodology. The preparation of the optically active dextrorotatory isomer of the titled product (87% ee) was carried out essentially by the same route, utilizing (R)-(−)-1-(morpholin-4-yl)propan-2-ol (98% ee) as a key intermediate. The spectroscopic characterization of the ethereal analog of iso-moramide and the enantioselective retention relationship of its enantiomers using HPLC on the cellulose-based chiral stationary phase were performed. Moreover, as a proof-of-principle, single-crystal X-ray diffraction (XRD) analysis of the synthesized 2-[(2R)-2-(morpholin-4-yl)propoxy]-2,2-diphenyl-1-(pyrrolidin-1-yl)ethan-1-one is reported.

Chemical modification of lipases: A powerful tool for activity improvement

The demand for adequate and ecologically acceptable procedures to produce the most differentiated products has been growing in recent decades, with enzymes being excellent examples of the advances achieved so far. Lipases are astonishing catalysts with a vast range of applications including the synthesis of esters, flavours, biodiesel, and polymers. The broad specificity of the substrates, as well as the regio-, stereo-, and enantioselectivity, are the differentiating factors of these enzymes. Structural modification is a current approach to enhance the activity of lipases. Chemical modification of lipases to improve catalytic performance is of great interest considering the increasingly broad fields of application. Together with the physical immobilization onto solid supports, different strategies have been developed to produce catalysts with higher activity and stability. In this review, practical insights into the different strategies developed in recent years regarding the modification of lipases are described. For the first time, the impact of the modifications on the activity and stability of lipases, as well as on the biotechnological applications, is fully compiled. This article is protected by copyright. All rights reserved.

Characteristics of Crosslinking Polymers Play Major Roles in Improving the Stability and Catalytic Properties of Immobilized Thermomyces lanuginosus Lipase

This study aimed to improve the stability and catalytic properties of Thermomyces lanuginosus lipase (TLL) adsorbed on a hydrophobic support. At the optimized conditions (pH 5 and 25 °C without any additions), the Sips isotherm model effectively fitted the equilibrium adsorption data, indicating a monolayer and the homogenous distribution of immobilized lipase molecules. To preserve the high specific activity of adsorbed lipase, the immobilized lipase (IL) with a moderate loading amount (approximately 40% surface coverage) was selected. Polyethylenimine (PEI) and chitosan (CS) were successfully applied as bridging units to in situ crosslink the immobilized lipase molecules in IL. At the low polymer concentration (0.5%, w/w) and with 1 h incubation, insignificant changes in average pore size were detected. Short-chain PEI and CS (MW ≤ 2 kDa) efficiently improved the lipase stability, i.e., the lipase loss decreased from 40% to <2%. Notably, CS performed much better than PEI in maintaining lipase activity. IL crosslinked with CS-2 kDa showed a two- to three-fold higher rate when hydrolyzing p-nitrophenyl butyrate and a two-fold increase in the catalytic efficiency in the esterification of hexanoic acid with butanol. These in situ crosslinking strategies offer good potential for modulating the catalytic properties of TLL for a specific reaction.

Chemical modification for improving catalytic performance of lipase B from Candida antarctica with hydrophobic proline ionic liquid

In this study, a series of proline ionic liquids with different lengths of hydrophobic alkyl on the side chain were used to modify the Candida Antarctic lipase B (CALB). The catalytic activity, thermal stability and tolerance to methanol and DMSO of the modified enzyme were all improved simultaneously. The optimum temperature changed from 55 to 60 ℃. The hydrophobicity and anion type of the modifier have important influence on the catalytic performance of CALB. CALB modified by [ProC₁₂][H₂PO₄] has a better effect. Under the optimal conditions, its hydrolysis activity was 3.0 times than that of the native enzyme, the catalytic efficiency Kcat/Km improved 2.8 times in aqueous phase, and the tolerance to organic solvent with strong polarity (50% methanol 2 h) was increased by 6.8 times. Fluorescence spectra and circular dichroism (CD) spectroscopy showed that the introduction of ionic liquids changed the microenvironment near the fluorophores of the enzyme protein, the α-helix decreased and β-sheet increased in the secondary structure of the modified enzymes. The root mean square deviation (RMSD), residue root mean square fluctuation (RMSF), radius of gyration (Rg), and solution accessible surface area (SASA) of [ProC₂][Br]-CALB, [ProC₁₂][Br]-CALB and native CALB were obtained for comparison by molecular dynamics simulation. The results of dynamics simulation were in good agreement with enzymology experiment. The introduction of ionic liquids can keep CALB in a better active conformation, and proline ionic liquids with long hydrophobic chains can significantly improve the surface hydrophobicity and overall rigidity of CALB. This research offers a new idea for rapid screening of efficient modifiers and provision of enzymes with high stability and activity for industrial application.

Preparation and characterization of a novel thermostable lipase from Thermomicrobium roseum

In this study, a hypothetical lipase gene from Thermomicrobium roseum DSM 5159 (GenBank: ACM04789.1) was recombinantly expressed in two system and characterized.