Post-functionalization through covalent modification of organic counter ions: a stepwise and controlled approach for novel hybrid polyoxometalate materials

Modulating the catalytic properties of decavanadate hybrids using a mixed counterion strategy for selective oxidation of thiophene-based sulfides and detoxification of mustard gas simulant

Selective oxidation of sulfides to sulfoxides, especially thiophene-based sulfides, is a challenging task. Herein, we report a mixed counterion strategy in polyoxometalate (POM) chemistry to tune the selectivity of sulfoxidation reaction catalyzed by decavanadate cluster-based hybrids using H2O2 as the oxidant under ambient conditions. By employing two different aryl sulfonium counterions (ASCIs) bearing different organic functional groups (phenol/aldehyde/salicylaldehyde/2,6-diformyl phenol) in a 1 : 1 synthetic feed ratio, we have generated a series of decavanadate-based hybrids HY1-HY6. Different functional groups on the periphery of hybrids HY1-HY6 helped control the efficiency and selectivity of the sulfoxidation reaction by fine-tuning the electronic and supramolecular effects of these hybrids as catalysts. Further, these hybrids were also applied as catalysts for detoxifying 2-chloroethyl ethyl sulfide (CEES), a mustard gas simulant. The hybrid HY5, with a structural formula (DFHPDS)2(FPDS)2[H2V10O28](H2O)3 (DFHPDS = (3,5-diformyl-4-hydroxyphenyl)dimethylsulfonium, and FPDS = (4-formylphenyl)dimethylsulfonium) showed the best catalytic properties in the series, with up to 99% conversion and 85% and 99% selectivity towards sulfoxide in the case of dibenzothiophene (DBT) and CEES, respectively. This study's findings open new avenues for tuning the catalytic properties of POM-based hybrids toward selective organic transformation reactions by using a mixed counterion strategy.

Multifunctional Aryl Sulfonium Decavanadates: Tuning the Photochromic and Heterogeneous Oxidative Desulfurization Catalytic Properties Using Salicylaldehyde-type Functional Moieties on Counterions

Multifunctional materials based on polyoxovanadates (POVs) have rarely been reported. Herein, we used aryl sulfonium counterions (ASCIs) bearing a salicylaldehyde-type functionality to tune the properties of decavanadate ([V10O28]6-)-based hybrids for their application in photochromism and heterogeneous oxidative desulfurization (ODS) catalysis. The counterions FHPDS ((3-formyl-4-hydroxyphenyl)dimethylsulfonium), DFHPDS ((3,5-diformyl-4-hydroxyphenyl)dimethylsulfonium), and EFPDS ((4-ethoxy-3-formylphenyl)dimethylsulfonium) were clubbed with the decavanadate cluster to generate the hybrids (FHPDS)4[H2V10O28](H2O)4 (HY1), (DFHPDS)4[H2V10O28](H2O)3 (HY2), and (EFPDS)4[H2V10O28](H2O)6 (HY3). The photochromic properties of these hybrids were tested under 365 nm irradiation, which showed a color change from yellow to green. Different hybrids exhibited different photocoloration half-life (t1/2) values in the range of 0.77-28.38 min, suggesting the dependence of the photocoloration properties upon functional groups on the counterions. The hybrid HY2, having a 2,6-diformyl phenol moiety on the ASCI, exhibited an impressive t1/2 of 0.77 min. UP to 70% reversibility of photocoloration was achieved for the best photochromic hybrid HY2 in 48 h at 70 °C under an oxygen atmosphere. Theoretical and experimental data suggested that some of these aryl sulfonium POVs follow a different e--h+ stabilization mechanism than traditional sulfonium POM hybrids. Further, the salicylaldehyde-type ASCIs control the solubility of the decavanadate hybrids, which enables their application as heterogeneous catalysts for the selective oxidation of various sulfides. The nature of the substituents on the ASCIs also affected their catalytic activities; the counterion that facilitates the reversible V4+/V5+ switching enhances the catalytic ODS efficiency of the hybrids. Using HY2 as the catalyst, up to 99% conversion and 96% selectivity toward sulfones were achieved in dibenzothiophene (DBT) oxidation. The present study suggests a new promising approach for controlling POVs' photoresponsive and catalytic properties by using ASCIs bearing salicylaldehyde-type functional moieties.

Keggin Cluster Modulated Photocatalytic Activity of Aryl Sulfonium Polyoxometalate Hybrids toward Dichromate Reduction

Dichromate (Cr₂O₇^2-) ion having chromium in its +6 oxidation state is a carcinogen and a potential threat to humans and aquatic life. The photocatalytic reduction of toxic Cr(VI) species into less toxic Cr(III) is an important target in heterogeneous catalysis. In this work, the catalytic activities of a series of Keggin cluster-based aryl sulfonium polyoxometalate hybrids, (FPDS)₃[PMo₁₂O₄₀] (1), (FPDS)₃[PW₁₂O₄₀] (2), (FPDS)₄[SiMo₁₂O₄₀] (3), and (FPDS)₄[SiW₁₂O₄₀] (4), toward the photocatalytic reduction of Cr(VI) have been analyzed and compared. Here, we used the aryl sulfonium counterions to modulate the POM cluster's solubility in water and stabilize the photogenerated e^--h⁺ pair on the cluster. All of the hybrids 1-4 catalyzed the reduction of Cr(VI) to Cr(III) under ultraviolet (UV) irradiation, and their photocatalytic efficiencies followed the order hybrid 1 > hybrid 3 > hybrid 2 > hybrid 4, with the rate-constant values of 0.048, 0.0056, 0.0035, and 0.0028 min^-1, respectively. Hybrid 1 with [PMo₁₂O₄₀]^3- Keggin cluster exhibited the best photocatalytic activity in the series yielding a 99% reduction in 120 min. The reasons behind the best photocatalytic activity of hybrid 1 are identified as its low band gap, less charge recombination, and fast photoresponse. The electron-trapping analyses performed using AgNO₃ revealed electrons as the main reactive species responsible for the photocatalytic reduction of Cr(VI). A plausible photocatalytic mechanism has also been proposed based on electron-trapping experiments. The present study shows that aryl sulfonium Keggin hybrids can function as efficient photocatalysts for Cr(VI) reduction, and their catalytic efficiency varies with the nature of the Keggin cluster.

Polyoxometalate-Supported Copper(I)-Pyrazole Complex: Unusual Stability, Geometrical Isomers, Organic Transformation, and Computation

We have described the synthesis and characterization of a polyoxometalate (POM)-supported copper(I)-pyrazole complex, [Cu^I(C₁₅H₁₂N₂)₂] [PW₁₂O₄₀{Cu^I(C₁₅H₁₂N₂)₂}₂]·CH₃OH (1). There are three Cu(I)-pyrazole coordination complexes in compound 1, out of which two are supported by the {PW₁₂O₄₀}^3- Keggin POM by coordinate covalent bonds from the POM surface through oxygen donors to the Cu(I) centers of two Cu(I) complexes and one remains uncoordinated to the POM surface, acting as a cationic complex species in the crystals of 1. The POM-coordinated Cu(I) complexes have a T-shaped geometry, and the uncoordinated Cu(I) complex is a linear one. During the solvothermal synthesis of compound 1, remarkably, the associated 1,5-diphenylpyrazole ligand is formed from cinnamaldehyde phenylhydrazone through oxidative cyclization at the cost of Cu(II) reduction to Cu(I), and then, these two (copper(I) and pyrazole ligand) form the coordination complex. Compound 1 undergoes desolvation on heating the single crystals of compound 1 at 55 °C in the aerial atmosphere with the formation of the desolvated compound [Cu^I(C₁₅H₁₂N₂)₂][PW₁₂O₄₀{Cu^I(C₁₅H₁₂N₂)₂}₂] (2). Interestingly, when an aqueous suspension of compound 1 is bubbled with O₂ gas at room temperature, it undergoes solid-to-solid transformation, resulting in the formation of the compound [Cu^I(C₁₅H₁₂N₂)₂]₃[PW₁₂O₄₀] (3). Compounds 1, 2, and 3 have been characterized by routine spectral analyses (including cyclic voltammetry and X-ray photoelectron spectroscopy (XPS) studies) and unambiguously by single-crystal X-ray crystallography. We have performed density functional theory (DFT) calculations on compound 1 to understand the rationale of its unusual stability toward oxidation.

Modulation of photocatalytic properties through counter-ion substitution: tuning the bandgaps of aromatic sulfonium octamolybdates for efficient photo-degradation of rhodamine B

Modulating the photocatalytic properties of polyoxometalate-organic hybrids through counterion substitution is a less explored concept. In this study, a new series of aromatic sulfonium counterions (ASCs) having the general formula X-C₆H₄-S(Me₂)⁺, where X represents different functional substituents such as -H, -Cl, -Me, and -CHO at the para-position of the sulfonium moiety on a benzene ring, have been used for fine-tuning the optical bandgaps and adsorption properties of octamolybdate [Mo₈O₂₆]^4- hybrids for photocatalytic dye degradation applications. The photodegradation of rhodamine B (RhB) is used as a model reaction, which follows pseudo-first-order kinetics exhibiting counterion-dependent degradation rate constants. The hybrid catalyst bearing a -CHO substituent on the ASC showed the lowest bandgap (2.91 eV) and the highest degradation rate constant (0.0141 min^-1) of the series. A possible mechanism of photocatalytic dye degradation by hybrids involving the generation of reactive oxygen species (ROS) has been proposed, supported by radical scavenging studies. The intermediates formed during the photodegradation of RhB were analyzed and identified using electrospray ionization mass spectrometry (ESI-MS). The present study reveals a new strategy for tuning the photocatalytic properties of hybrids using differently functionalized ASCs and opens up new avenues for novel POM-hybrids as potential photocatalysts for environmental remediation applications.