Self-assembly of amphiphilic polyoxometalates for the preparation of mesoporous polyoxometalate-titania catalysts

Assessing the Influence of Confinement on the Stability of Polyoxometalate-Functionalized Surfaces: A Soft Sequential Immobilization Approach for Electrochromic Devices

A functionalization process has been developed and the experimental conditions optimized allowing the immobilization of first-row transition metal (Mn+) containing polyoxometalates (POMs) with the formula [M(H2O)P2W17O61](10-n)- on transparent indium-tin oxide (ITO) electrodes for electrochromic applications. Both flat ITO grafted with 4-sulfophenyl moieties and sulfonate-functionalized vertically oriented silica films on ITO have been used as electrode supports to evaluate possible confinement effects provided by the mesoporous matrix on the stability of the modified surfaces and their electrochromic properties. Functionalization involved a two-step sequential process: (i) the immobilization of hexaaqua metallic ions, such as Fe(H2O)63+, onto the sulfonate-functionalized materials achieved through hydrogen bonding interactions between the sulfonate functions and aqua ligands (water molecules) coordinated to the metallic ions facilitating and stabilizing the attachment of the metallic ions to the sulfonated surfaces; (ii) their coordination to [P2W17O61]10- species to generate "in situ" the target [Fe(H2O)P2W17O61]7- moieties. Comparison of the characterized surfaces clearly evidenced a significant improvement in the long-term stability of the nanostructured [Fe(H2O)P2W17O61]7--functionalized silica films compared to the less constrained flat [Fe(H2O)P2W17O61]7--modified ITO electrodes for which a rapid loss of [P2W17O61]10- species was observed. Concordantly, the [Fe(H2O)P2W17O61]7- POM confined in the mesoporous films coated on ITO gave rise to much better and stable electrochromic properties, with a transmittance modulation of 40% at 515 nm.

Single-Molecule Magnet Behavior of Confined Dy(III) in a Mixed Heteroatom-Substituted Polyoxotungstate

Two heteroatom-templated Dy(III)-confined polyoxotungstates [H2N(CH3)2]7Na7[Dy2(H2O)7(W4O9)(HPSeW15O54)(α-SeW9O33)2]·31H2O (1) and [H2N(CH3)2]14K2Na18{[Dy2(H2O)13W14O40]2[α-SeW9O33]4[HPSeW15O54]2}·44H2O (2) were synthesized by a one-pot aqueous reaction and structurally characterized. The most distinctive structural feature of complexes 1 & 2 is the simultaneous presence of both trivacant Keggin [α-SeW9O33]8- and Dawson [HPSeW15O54]10- building blocks containing P(III)-Se(IV) heteroatoms. The trimeric polyanion of 1 can be represented as a fusion of two trivacant Keggin [α-SeW9O33]8- and Dawson [HPSeW15O54]10- building units encapsulating the [Dy2(H2O)7(W4O9)]12+ cluster. On the other hand, hexameric polyoxoanions of 2 are described as four trivacant Keggin [α-SeW9O33]8- and two Dawson [HPSeW15O54]10-, building units anchoring a [Dy4(H2O)26W28O80]20+ cluster. The magnetic investigation revealed the presence of significant magnetic anisotropy and slow relaxation of magnetization behavior for complex 1 with a phenomenological energy barrier, Ueff = 13.58 K in the absence of an external magnetic field, and Ueff = 24.57 K in the presence of a 500 Oe external dc magnetic field. On the other hand, complex 2 favors the QTM relaxation process in the absence of an external magnetic field and shows field-induced slow relaxation of magnetization with Ueff = 11.11 K at 1500 Oe applied dc field. The in-depth analysis of magnetic relaxation dynamics shows that the relaxation process follows the Orbach as well as Raman relaxation pathways. Further, the ab initio calculation of the studied complexes confirms that the highly axial ground and first excited energy states (containing pure highest mJ states) are responsible for the observed single-molecule magnet (SMM) behavior. Remarkably, this is the first example of a mixed heteroatom-based Dy(III)-substituted polyoxotungstate with both trimeric Keggin [α-SeW9O33]8- and Dawson [HPSeW15O54]10- building units showing SMM behavior.

Keplerate {Mo132}-Stearic Acid Conjugates: Supramolecular Synthons for the Design of Dye-Loaded Nanovesicles, Langmuir-Schaefer Films, and Infochemical Applications

Self-assembly gives rise to the versatile strategies of smart material design but requires precise control on the supramolecular level. Here, inorganic-organic synthons (conjugates) are produced by covalently grafting stearic acid tails to giant polyoxometalate (POM) Keplerate-type {Mo132} through an organosilicon linker (3-aminopropyltrimethoxysilane, APTMS). Using the liposome production approach, the synthons self-assemble to form hollow nanosized vesicles (100-200 nm in diameter), which can be loaded with organic dyes─eriochrome black T (ErChB) and fluorescein (FL)─where the POM layer serves as a membrane with subnanopores for cell-like communication. The dye structure plays an essential role in embedding dyes into the vesicle's shell, which opens the way to control the colloidal stability of the system. The produced vesicles are moved by an electric field and used for the creation of an infochemistry scheme with three types of logic gates (AND, OR, and IMP). To design 2D materials, synthons can form spread films, from simple addition on the water-air interface to lateral compression in the Langmuir bath, and highly ordered structures appear, demonstrating electron diffraction in Langmuir-Schaefer (LS) films. These results show the significant potential of POM-based synthons and nanosized vesicles to supramolecular design the diversity of smart materials.

Tunable Ordered Nanostructured Phases by Co-assembly of Amphiphilic Polyoxometalates and Pluronic Block Copolymers

The assembly of polyoxometalate (POM) metal-oxygen clusters into ordered nanostructures is attracting a growing interest for catalytic and sensing applications. However, assembly of ordered nanostructured POMs from solution can be impaired by aggregation, and the structural diversity is poorly understood. Here, we present a time-resolved small-angle X-ray scattering (SAXS) study of the co-assembly in aqueous solutions of amphiphilic organo-functionalized Wells-Dawson-type POMs with a Pluronic block copolymer over a wide concentration range in levitating droplets. SAXS analysis revealed the formation and subsequent transformation with increasing concentration of large vesicles, a lamellar phase, a mixture of two cubic phases that evolved into one dominating cubic phase, and eventually a hexagonal phase formed at concentrations above 110 mM. The structural versatility of co-assembled amphiphilic POMs and Pluronic block copolymers was supported by dissipative particle dynamics simulations and cryo-TEM.

Organic NIR-II dyes with ultralong circulation persistence for image-guided delivery and therapy

Nanocarriers hold great promise for the controlled release of therapeutic payloads to target organs/tissues and extended duration of anticancer agents in the bloodstream. However, limited data on their in vivo pharmacokinetics and delivery process hamper clinical applications. Here we report a series of micellar nanocarriers self-assembled from new-generation thiophenthiadiazole (TTD)-based NIR-II fluorophores HLAnP (n = 1-4) for simultaneous bioimaging and drug delivery. The NIR-II HLA4P nanocarrier displays exceptional non-fouling performance, minimal immunogenicity, ultralong blood half-life, and high tumor accumulation even with different administration routes. When used as a drug carrier, HLA4P with encapsulated doxorubicin (DOX) realized accurate tumor targeting and continuous real-time in vivo NIR-II tracking of drug delivery and therapy, showing a sustained release rate, improved therapeutic effect, and diminished cardiotoxicity as compared to free DOX. This study provides a new perspective on the design of dual-functional NIR-II fluorophores for diagnostic and therapeutic applications.

Amphiphilic Polyoxometalate-CNTs Nanohybrid as Highly Efficient Enzyme-free Electrocatalyst for H2O2 Sensing

Hybrid nanomaterials are emerging as a potential platform for the efficient detection of biomolecules, thus, the rational design of such materials has been widely explored. Polyoxometalates (POM) nanoclusters can serve...

Regulating the catalytic activity of multi-Ru-bridged polyoxometalates based on differential active site environments with six-coordinate geometry and five-coordinate geometry transitions

Five-coordinate geometry around ruthenium with highly exposed active sites has attracted intensive scientific interest due to its superior properties and extensive applications. Herein, we report a series of structurally controllable multi-Ru-bridged polyoxometalates, K5NaH10[{Ru4(H2O)n}(WO2)4(AsW9O33)4]·mH2O {1, 1-dehyd-373K, 1-dehyd-473K, 1-dehyd-573K; n = 4, m = 36; n = 4, m = 6; n = 4, m = 0; n = 0, m = 0} fabricated through a feasible assembly strategy using arsenotungstate {2, KNa12H17Cl2(As4W40O140)·29H2O} as a structure-directing unit. Systematic characterization methods identified that the six-coordinate geometry can successfully transform into five-coordinate geometry about active sites (Ru) by removing aqua ligands under high reaction temperatures. All the multi-Ru-bridged polyoxometalates demonstrated strong stability and catalytic effectiveness in the transformation of 1-(4-chlorophenyl)ethanol to 4'-chloroacetophenone under very mild conditions. 1-dehyd-573K, specifically, achieves the best catalytic effectiveness with a turnover frequency (TOF) = 25 100·h-1 owing to its unique five-coordinate geometry on the Ru sites. To our knowledge, 1-dehyd-573K outperforms other POM-based catalysts in the oxidative catalysis of 1-(4-chlorophenyl)ethanol. The heterogeneous polyoxometalates were also proven to be strongly reusable, with their structural integrities well maintained after multiple-cycle catalytic reactions.

Anderson-type polyoxometalates: from structures to functions

Anderson-type polyoxometalates (POMs) are one of the most important groups of the POM family. In the past decade, the functionalization of Anderson-type POMs has achieved significant progress and these materials have already shown unique charm in catalysis, molecular devices, energy materials, and inorganic biochemical drugs. In particular, their highly flexible topological structure and diverse functionalization methods make them the most convenient and universal platforms for rational design and controllable synthesis. This review provides a deep discussion on the recent progress in the synthetic methodology, structural exploration, and promising applications of Anderson-type POMs. It also summarizes the latest research directions and provides future prospects.