Zeolitic imidazolate framework-67-derived chalcogenides as electrode materials for supercapacitors

With the rapid development of new energy technologies, hybrid supercapacitors have received widespread attention owing to their advantages of high power density, fast charging/discharging rate and long cycle life. In this case, the selection and design of electrode materials are the key to improving the energy storage performance of supercapacitors. Herein, zeolitic imidazolate framework-67 (ZIF-67) is presented as a good candidate material for the fabrication of supercapacitor electrodes because of its controllable pore size, constant cavity size and large specific area. Moreover, pristine ZIF-67 and ZIF-67-derived porous carbon have shown exemplary performances in supercapacitors. However, they belong to the class of electric double layer capacitor materials and have a lower magnitude of energy storage compared with pseudocapacitor materials. Therefore, to improve the energy density of hybrid supercapacitors, other ZIF-67 derivatives need to be explored, especially chalcogenides. This review mainly reports the application of ZIF-67-derived transition metal chalcogenides (TMCs, C including Oxide, Sulfide, Selenide, Telluride) in supercapacitors. Moreover, the strategies for the preparation of ZIF-67-derived TMCs and their electrochemical performance in supercapacitors are further discussed. Finally, the remaining challenges and future perspectives are highlighted.

Ultrafast and Universal Synthetic Route for Nanostructured Transition Metal Oxides Directly Grown on Substrates

Nanostructured transition metal oxides (NTMOs) have consistently piqued scientific interest for several decades due to their remarkable versatility across various fields. More recently, they have gained significant attention as materials employed for energy storage/harvesting devices as well as electronic devices. However, mass production of high-quality NTMOs in a well-controlled manner still remains challenging. Here, a universal, ultrafast, and solvent-free method is presented for producing highly crystalline NTMOs directly onto target substrates. The findings reveal that the growth mechanism involves the solidification of condensed liquid-phase TMO microdroplets onto the substrate under an oxygen-rich ambient condition. This enables a continuous process under ambient air conditions, allowing for processing within just a few tens of seconds per sample. Finally, it is confirmed that the method can be extended to the synthesis of various NTMOs and their related compounds.

Hierarchical Ni3V2O8@N-Doped Carbon Hollow Double-Shell Microspheres for High-Performance Lithium-Ion Storage

Transition metal oxides (TMOs) are highly dense in energy and considered as promising anode materials for a new generation of alkaline ion batteries. However, their electrode structure is disrupted due to significant volume changes during charging and discharging, resulting in the short cycle life of batteries. In this paper, the hierarchical Ni3V2O8@N-doped carbon (Ni3V2O8@NC) hollow double-shell microspheres were prepared and used as electrode materials for lithium-ion batteries (LIBs). The utilization efficiency and ion transfer rate of Ni3V2O8 were improved by the hollow microsphere structure formed through nanoparticle self-assembly. Furthermore, the uniform N-doped carbon layer not only enhanced the structural stability of Ni3V2O8, but also improved the overall electrical conductivity of the composite. The Ni3V2O8@NC electrode has an initial discharge capacity of up to 1167.3 mAh g-1 at a current density of 0.3 A g-1, a reversible capacity of up to 726.5 mAh g-1 after 200 cycles, and still has a capacity of 567.6 mAh g-1 after 500 cycles at a current density of 1 A g-1, indicating that the material has good cycle stability and high-rate capability. This work presents new findings on the design and fabrication of complex porous double-shell nanostructures.

Surface modification prepared porous copper oxide/(Cu-S)n metal-organic framework/reduced graphene oxide hierarchical structure for highly selective electrochemical quercetin detection

Electrochemical alkalization of (Cu-S)n metal-organic framework (MOF) and graphene oxide ((Cu-S)n MOF/GO) composite yields a new CuO/(Cu-S)n MOF/RGO (reduced GO) composite with porous morphology on screen printed carbon electrode (SPCE) which facilitated the electron transfer properties in electrochemical quercetin (QUE) detection. A selective QUE detection ability has been demonstrated by the constructed electrochemical sensor (CuO/(Cu-S)n MOF/RGO/SPCE), which also has a broad dynamic range of 0.5 to 115 µM in pH 3 by differential pulse voltammetry. The detection limit is 0.083 µM (S/N = 3). In this study, it was  observed that the real samples contained 0.34 mg mL-1 and 27.7 µg g-1 QUE in wine and onion, respectively.

Precise design and in situ synthesis of hollow Co9S8@CoNi-LDH heterostructure for high-performance supercapacitors

Layered double hydroxides (LDHs) and metal sulfides (MSs) have been widely used as promising electrode materials for supercapacitors, and the rational architectural design of MS/LDH heterogeneous structures is critical to optimize large energy storage. Herein, a precisely designed hollow Co9S8 nanotubes@CoNi-LDH nanosheet heterostructure on Ni foam, facilely prepared by an ingenious in situ strategy in this Co9S8 nanoarray was first used as the self-sacrificing template and metal source to in situ synthesize Co-ZIF-67 polyhedron to form the Co9S8@ZIF-67 heterostructure, and then Co9S8@ZIF-67 was in situ etched successfully using Ni2+ ions to form the final Co9S8@CoNi-LDH/NF core-shell nanoarray. This in situ synthetic strategy to fabricate the heterostructure is conducive to boosting the structural stability, modifying the electric structure and regulating the interfacial charge transfer. Due to the synergistic effect and tight heterogeneous interface, Co9S8@CoNi-LDH/NF displayed an outstanding capacitance of 9.65 F cm-2 at a current density of 2 mA cm-2 and excellent capacitance retention rate of 91.7% after 5000 cycles. In addition, the ASC device assembled with AC has an extremely high energy density of 1.0 mW h cm-2 at 2 mA cm-2 and maintains 96.9% capacitance retention after 5000 cycles. This work provides a skillful strategy for the precise design and in situ synthesis of MS/LDH heterostructures with fascinating features for electrochemical energy storage applications.

Toward Enhanced Electrochemical Performance by Investigation of the Electrochemical Reconstruction Mechanism in Co2V2O7 Hexagonal Nanosheets for Hybrid Supercapacitors

As for hybrid supercapacitors, it is important to enhance the long cycling performance and high specific capacitance. In this paper, cobalt vanadate (Co₂V₂O₇) hexagonal nanosheets on nickel foam are manufactured by a facile hydrothermal method and then transformed into numerous smaller size interconnected hierarchical nanosheets without any shape change via electrochemical reconstruction. Benefiting from the favorable architecture of hierarchical nanosheets via electrochemical reconstruction, the Co₂V₂O₇ hexagonal nanosheet electrode exhibits a remarkable long cycling performance with 272% specific capacitance retention after 100,000 cycles at a current density of 5 A g^-1 and then displays an increasing specific capacitance of 1834 F g^-1 (tested at 1 A g^-1). Furthermore, an aqueous hybrid supercapacitor device based on the Co₂V₂O₇ hexagonal nanosheet electrode exhibits a high energy density of 35.2 Wh kg^-1 at a power density of 1.01 kW kg^-1 and an excellent cyclic stability with 71.4% capacitance retention after 10,000 cycles at 5 A g^-1. These results offer a practicable pathway for enhancing the electrochemical properties of other metal oxides through electrochemical reconstruction.

One-step preparation of Co2V2O7: synthesis and application as Fenton-like catalyst in gas diffusion electrode

Bimetallic oxides and MOFs have been employed as catalysts for ORR via two-electron and Fenton-based processes. This work reports the development of a new green one-step route for obtaining Co2V2O7....

Hierarchical Ni(OH)2-MnO2 hollow spheres as electrode material for excellent performance supercapacitors

Hollow structures with unique structural features are incredibly attractive for energy storage systems. Here we demonstrate a self-template strategy to prepare hierarchical Ni(OH)2-MnO2 hollow spheres. First, Ni-Mn glycerate solid spheres...

Optimization of metal–organic framework derived transition metal hydroxide hierarchical arrays for high performance hybrid supercapacitors and alkaline Zn-ion batteries

A Setaria viridis-like hierarchical A-Co(OH)₂@NiCo-LDH nanoarray has been fabricated and it possesses the advantages of large surface area and stable microstructure, leading to excellent energy storage performances of HSC and AZIB.