Amino-modified kraft lignin microspheres as a support for enzyme immobilization

Green biocatalyst for decolorization of azo dyes from industrial wastewater: Coriolopsis trogii 2SMKN laccase immobilized on recycled brewer's spent grain

This study presents an innovative approach for the reuse and recycling of waste material, brewer's spent grain (BSG) for creating a novel green biocatalyst. The same BSG was utilized in several consecutive steps: initially, it served as a substrate for the cultivation and production of laccase by a novel isolated fungal strain, Coriolopsis trogii 2SMKN, then, it was reused as a carrier for laccase immobilization, aiding in the process of azo dye decolorization and finally, reused as recycled BSG for the second successful laccase immobilization for six guaiacol oxidation, contributing to a zero-waste strategy. The novel fungal strain produced laccase with a maximum activity of 171.4 U/g after 6 days of solid-state fermentation using BSG as a substrate. The obtained laccase exhibited excellent performance in the decolorization of azo dyes, both as a free and immobilized, at high temperatures, without addition of harmful mediators, achieving maximum decolorization efficiencies of 99.0%, 71.2%, and 61.0% for Orange G (OG), Congo Red, and Eriochrome Black T (EBT), respectively. The immobilized laccase on BSG was successfully reused across five cycles of azo dye decolorization process. Notably, new green biocatalyst outperformed commercial laccase from Aspergillus spp. in the decolorization of OG and EBT. GC-MS and LC-MS revealed azo-dye degradation products and decomposition pathway. This analysis was complemented by antimicrobial and phytotoxicity tests, which confirmed the non-toxic nature of the degradation products, indicating the potential for safe environmental disposal.

Fabrication of lignin-based sub-micro hybrid particle as a novel support for adenylate cyclase immobilization

This study developed a surface functionalized lignin-based sub-microsphere as an innovative support for enzyme immobilization. Lignin was first modified with a silane reagent leading to lignin/SiO2 (LS) organic/inorganic hybrid particles, displayed as regular sub-micro spheres with a SiO2 shell as demonstrated in SEM images. The LS particles were further modified to introduce nickel ions, as evidenced in XPS spectra, facilitating affinity adsorption with a his-tagged enzyme. The immobilization of adenylate cyclase from Haloactinopolyspora alba (HaAC), expressed in Escherichia coli, was conducted on the surface functionalized LS (LS-G-NTA-Ni). The immobilization conditions were optimized to achieve the highest relative activity, which were determined to be using a Ni2+ concentration of 62.5 mM, at pH=9.5 and 25 °C, with an enzyme-to-support ratio of 4.0 for a duration of 2 h. The immobilized HaAC shows maximum relative activity at pH=9.5 and 40 °C, and exhibits significantly improved thermal stability compared to the free enzyme. After undergoing five reusing cycles, the immobilized HaAC maintains a satisfactory activity (54.15%), which is due to the surface chemistry and the structural stability of the functionalized LS. This work provides a valuable exploration for high-value application of industrial lignin.

Solventless Amination of Lignin and Natural Phenolics using 2-Oxazolidinone

Reactive amine compounds are critical for a vast array of useful chemicals in society, yet a limited number of them are derived from renewable resources. This study developed an efficient route to obtain aminated building blocks from phenolic resources derived from nature, such as lignin and tannic acid, for enhancing their utility in applications such as epoxy resins, nylons, polyurethanes, and other polymeric materials. The reaction utilized a carbon storage compound, 2-oxazolidinone as a solvent and as a reagent circumventing the need of hazardous chemistry of conventional amination routes such as those involving formaldehyde. Both free acids and hindered phenolics were readily converted into aminoethyl derivatives resulting in aromatics with primary amine functionality. The aminated compounds, with the potential for enhanced reactivity, can pave the way toward more advanced renewable building blocks.

Lignin based microspheres for effective dyes removal: Design, synthesis and adsorption mechanism supported with theoretical study

Multifunctional lignin bio-based adsorbent, b-LMS, was obtained via inverse copolymerization in the suspension of acryloyl modified kraft lignin (K_fL-AA) and bio-based trimethylolpropane triacrylate (bio-TMPTA). Morphological and structural characterization of K_fL-AA and b-LMS was performed using BET, FTIR, Raman, NMR, TGA, SEM, and XPS techniques. The b-LMS microspheres with 253 ± 42 μm diameters, 69.4 m² g^-1 surface area, and 59% porosity efficiently adsorb Malachite Green (MG), Tartrazine (T), and Methyl Red (MR) dye. The influence of pH, pollutant concentration, temperature, and time on the removal efficiency was studied in a batch mode. Favorable and spontaneous processes with high adsorption capacities e.g. 116.8 mg g^-1 for MG, 86.8 mg g^-1 for T, and 68.6 mg g^-1 for MR indicate the significant adsorptive potential of b-LMS. Results from diffusional and single mass transfer resistance studies indicate that pore diffusion is a rate-limiting step. Theoretical calculations confirmed a higher affinity of b-LMS to cationic dye MG compared with an anionic and neutral one, i.e. T and MR, respectively. The data fitting from a flow system, using semi-empirical equations and Pore Surface Diffusion Modelling (PSDM) provided breakthrough point determination. The results from the desorption and competitive adsorption study proved the exceptional performance of b-LMS. Moreover, sulfation of b-LMS, i.e.production of b-LMS-OSO₃H, introduced high-affinity sulfate groups with respect to cationic dye and cations. Developed methodology implements the principle of sustainable development and offers concept whose results contribute to the minimization of environmental pollution.

The Encounter of Biomolecules in Metal-Organic Framework Micro/Nano Reactors

In nature, biochemical reactions often take place in confined spaces, as typically exemplified by cells. As numerous cellular reactors can be integrated to maintain the living system, researchers have made constant efforts to construct cell-like structures for achieving similar transformations in vitro. Micro/nano reactors engineered by polymers and colloids are becoming popular and being applied in many fields, especially there has been an increasing trend toward constructing metal-organic framework (MOF) micro/nano reactors with the thriving of MOF nanotechnologies. Because of the uniform pores of MOFs, the transmission of substances can be regulated more accurately. Along with properties of large specific surface area, functional diversity and precise control of the particle size, MOFs are also ideal platforms for building distinct microenvironments for biological substances. Compared with traditional polymersomes and colloidosomes, the unique characteristics of MOFs render them potent micro/nano reactor shell materials, mimicking cells for applications in enzymatic catalysis, sensing, nanotherapy, vaccine, biodegradation, etc. This review highlights recent signs of progress on the design of MOF micro/nano reactors and their applications in biology, discusses the existing problems, and prospects their promising properties for smarter multifunctional applications.

Dual Valorization of Lignin as a Versatile and Renewable Matrix for Enzyme Immobilization and (Flow) Bioprocess Engineering

Lignin has emerged as an attractive alternative in the search for more eco-friendly and less costly materials for enzyme immobilization. In this work, the terephthalic aldehyde-stabilization of lignin is carried out during its extraction to develop a series of functionalized lignins with a range of reactive groups (epoxy, amine, aldehyde, metal chelates). This expands the immobilization to a pool of enzymes (carboxylase, dehydrogenase, transaminase) by different binding chemistries, affording immobilization yields of 64-100 %. As a proof of concept, a ω-transaminase reversibly immobilized on polyethyleneimine-lignin is integrated in a packed-bed reactor. The stability of the immobilized biocatalyst is tested in continuous-flow deamination reactions and maintains the same conversion for 100 cycles. These results outperform previous stability tests carried out with the enzyme covalently immobilized on methacrylic resins, with the advantage that the reversibility of the immobilized enzyme allows recycling and reuse of lignin beyond the enzyme inactivation. Additionally, an in-line system also based on lignin is added into the downstream process to separate the reaction products by catch-and-release. These results demonstrate a fully closed-loop sustainable flow-biocatalytic system based exclusively on lignin.