Label-free detection of creatinine using nitrogen-passivated fluorescent carbon dots

L-Arginine Doped Carbon Nanodots from Cinnamon Bark for Improved Fluorescent Yeast Cell Imaging

In this study, we present an economical and efficient synthesis method for carbon nanodots (CNDs) derived from cinnamon bark wood powder, with the incorporation of L-arginine as a dopant at varying ratios (Cinnamon : L-Arginine - 1:0.25, 1:0.5) via a hydrothermal reaction. Extensive structural and optical characterization was conducted through techniques such as FTIR, XRD, HR-TEM, DLS, UV-Vis, and PL spectra, providing a comprehensive understanding of the properties of CNDs and doped-CNDs. Quantum yields (QY) were quantified for synthesized materials, contributing to the assessment of their fluorescence efficiency. The synthesized CNDs were successfully applied for bioimaging of yeast cells, employing fluorescence microscopy to visualize their interaction. Remarkably, L-arginine-doped CNDs exhibited enhanced fluorescence, showcasing the influence of the dopant. The nature of these CNDs was rigorously investigated, confirming their biocompatibility. Notably, this work presents a novel approach to synthesizing CNDs from a renewable and sustainable source, cinnamon bark wood powder, while exploring the effects of L-arginine doping on their optical and biological properties. This work not only contributes to the synthesis and characterization of CNDs but also highlights their potential for diverse applications, emphasizing their structural, optical, and biological attributes. The findings underscore the versatility of CNDs derived from cinnamon bark wood powder and their potential for advancing biotechnological and imaging applications.

An "on-off-on" Fluorescent Sensor Based on Carbon Dots for the Detection of Au (III) and Creatinine

The present study proposes a new approach for detecting trace amounts of creatinine (Cre) through the utilization of a fluorescence sensor system consisting of nitrogen doped carbon dots (NCDs) and gold ions (Au3+). Yellow fluorescent carbon dots were prepared using a one-step hydrothermal method with o-phenylenediamine and isopropanol as raw materials. First, gold ions are reduced to gold nanoparticles (Au NPs), which bind to NCDs, resulting in electron transfer and fluorescence quenching of NCDs. After adding creatinine, Cre and Au NPs were preferentially combined to form non-fluorescent complexes, and the NCDs fluorescence was restored. The study achieved a detection limit of 1.06 × 10-7 M for Au3+ and 9.29 × 10-9 M for creatinine, indicating a high level of sensitivity. The sensing system has also been successfully utilized for detecting Au3+ in lake water and Cre in human urine, indicating its promising potential and practical applications in the areas of environmental monitoring and biosensing.

Carbon dot-graphene oxide-based luminescent nanosensor for creatinine detection in human urine

A fluorescence (FL)-based nanosensor has been devised for creatinine (CR) detection in human urine specimens. The proposed nanosensor utilized a nanocomposite (NC) of carbon dots (CDs) and graphene oxide (GO). The formation of CDs/GO NC reduced the CD FL emission (λexcitation = 390 nm, λemission = 461 nm) by ~ 75%. With the introduction of CR to the NC, the CD emission intensity was reinstated by approximately 70%. The linear detection range for CR was 10-5 to 0.1 mg dL-1 (R2 = 0.998), with a limit of detection of 4.3 × 10-2 mg dL-1. Additionally, CDs/GO NC exhibited outstanding consistency and specificity in recognizing CR within urine specimens from both healthy individuals and patients suffering from chronic kidney disease (CKD). The Bland-Altman assessment (utilizing 25 human urine specimens) displayed remarkable consensus (R2 = 0.995) among the FL approach and the benchmark Jaffe technique. This observation indicates the hands-on usefulness of the nanosensor for identifying CR in biological specimens.

Quantification of creatinine in whole blood by a paper-based device using an RGB sensor

Creatinine, an important biomarker for renal functions, is often conventionally estimated using the gold standard Jaffe reaction from blood, which involves the usage of a spectrophotometric measurement, thus restricting its utilization scope in point-of-care settings. Here, we report the development of a method for the single-step quantification of creatinine from whole blood using a paper-based microfluidic device. Our platform uses Whatman filter paper integrated with an LF1 membrane. The on-chip separation of blood plasma is achieved through the LF1 membrane, while the Whatman component of the device contains the embedded reagents for the Jaffe reaction. The combination of two different grades of paper enables a single-step quantification of creatinine as the separated blood plasma traverses to the reaction zone through capillary imbibition. Colorimetric readouts were quantified using an RGB sensor instead of a smartphone, which is highly platform dependent and incurs a relatively higher cost compared to the other components in typical point-of care (POC) devices. Our sensor was integrated within a 3D box, thereby making the detection virtually instrument free and perfectly suited for POC settings. The limit of detection (LOD) of our device was 0.219 mg dL-1, which falls within the lower range of physiological values. The coefficient of determination (R2) for the linearity and median accuracy were 0.978 and 94.047%, respectively. The relative standard deviation (RSD) for precision measurements remained below 5% for the developed protocol. Furthermore, we validated the performance of our device with 35 clinical samples in laboratory settings against the gold standard measurements. Our Bland-Altman plot as well as t-test and chi-square test results clearly confirmed the validity of our device within a 95% confidence interval.

High-Sensitivity Creatinine Detection via a Dual-Emission Ratiometric Fluorescence Probe Incorporating Amino-MIL-53@Mo/ZIF-8 and Rhodamine B

Quantifying creatinine (Cn) in biological fluids is crucial for clinically assessing renal insufficiency, thyroid irregularities, and muscle damage. Therefore, it is crucial for human health to have a simple, quick, and accurate Cn analysis technique. In this study, we have successfully synthesized a 3D ratiometric dual-metal-organic framework, namely, the amino-MIL-53@Mo/ZIF-8 and rhodamie B heterostructure, using an internal strategy for sustained growth. The dual-MOF functions as an adsorbent and preconcentrates Cn. The pH, reaction time, and volume ratio of amino-MIL-53@Mo/ZIF-8/rhodamie B were optimized using the one-variable-at-a-time technique in this study. The quantitative study of the Cn concentration for this RF biosensor was obtained under ideal conditions (R2 = 0.9962, n = 3), encompassing the linear range of 0.35-11.1 μM. The detection and quantitation limits were 0.18 and 0.54 nM, respectively. Both intra- and interday reproducibility showed high repeatability of the RF biosensor, UV-vis, and ZETA potential studies, and the Stern-Volmer relationship was used to clarify the fluorescence quenching process. These superior sensing capabilities and the benefits of simple manufacturing, acceptable stability, and practicality make the RF biosensor intriguing for ultrasensitive Cn detection in practical applications.

Carbon dot-copper nanocomposite-based fluorescent sensor for detection of creatinine in urine samples of CKD patients

Creatinine (CR) is accepted as a clinical biomarker of chronic kidney disease (CKD) such as renal injury and kidney failure. To help facilitate the prognosis of CKD, a highly luminescent carbon dot (CD)-based fluorescent (FL) sensor has been built and employed for CR detection in diverse media (e.g., artificial and human urine). CDs, synthesized from sucrose precursor by a rapid microwave-assisted method (average diameter 20 nm), exhibited highly luminescent green emission upon UV exposure (λexcitation = 390 nm, λemission = 453 nm) with excellent temporal stability over three months. The nanocomposites are formed between CDs and metal ions (e.g., Cu2+) to realize the optimum biosensing of CR. Although Cu2+ ions showcases a maximum quenching (73 %) of the CDs, Cu2+/CDs system restores 77 % of the original FL intensity upon the addition of CR. The linear detection range and limit of detection for CR are estimated as 10-5 to 0.1 mg·dL-1 (R2 = 0.936) and 5.1 × 10-16 mg·dL-1, respectively. Furthermore, our biosensor shows excellent reproducibility and selectivity for CR in urine samples of healthy subjects and CKD patients. The Bland-Altman analysis for urine samples (n = 30) showcased an excellent agreement (R2 = 0.95) between our method and the gold standard 'Jaffe' method. These observations supported the practical utility of our method proposed for detection of CR in clinical samples.

Al3+-Responsive Ratiometric Fluorescent Sensor for Creatinine Detection: Thioflavin-T and Sulfated-β-Cyclodextrin Synergy

Kidney disorders are a rising global health issue, necessitating early diagnosis for effective treatment. Creatinine, a metabolic waste product from muscles, serves as an ideal biomarker for kidney damage. The existing optical methods for creatinine detection often involve labor-intensive synthesis processes and present challenges with the aqueous solubility and sensitivity to experimental variations. In this study, we introduce a straightforward fluorescence "turn-on" ratiometric sensor system for creatinine detection in aqueous media with a limit of detection of 0.5 μM. The sensor is based on sulfated-β-cyclodextrin (SCD)-templated H-aggregate of a commercially available, ultrafast rotor dye thioflavin-T (ThT). The Al3+ ion-induced dissociation of ThT-SCD aggregates, followed by reassociation upon creatinine addition, generates a detectable signal. The modulation of monomer/aggregate equilibrium due to the disassembly/reassembly of the ThT-SCD system under Al3+/creatinine influence serves as the optimal strategy for ratiometric creatinine detection in aqueous media. Our sensor framework offers several advantages: utilization of the readily available dye ThT, which eliminates the need for a laborious synthesis of custom fluorescent probes; ratiometric sensing, which improves quantitative analysis accuracy; and compatibility with complex aqueous media. The sensor's practical utility has been successfully demonstrated in artificial urine samples. In summary, our sensor system represents a significant advancement in the rapid, selective, and sensitive detection of the clinically crucial bioanalyte creatinine, offering potential benefits for the early diagnosis and management of kidney disorders.

Synthesis, properties and potential applications of photoluminescent carbon nanoparticles: A review

Photoluminescent-carbon nanoparticles (PL-CNPs) are a new class of materials that received immense interest among researchers due to their distinct characteristics, including photoluminescence, high surface-to-volume ratio, low cost, ease of synthesis, high quantum yield, and biocompatibility. By exploiting these outstanding properties, many studies have been reported on its utility as sensors, photocatalysts, probes for bio-imaging, and optoelectronics applications. From clinical applications to point-of-care test devices, drug loading to tracking of drug delivery, and other research innovations demonstrated PL-CNPs as an emerging material that could substitute conventional approaches. However, some of the PL-CNPs have poor PL properties and selectivity due to the presence of impurities (e.g., molecular fluorophores) and unfavourable surface charges by the passivation molecules, which impede their applications in many fields. To address these issues, many researchers have been paying great attention to developing new PL-CNPs with different composite combinations to achieve high PL properties and selectivity. Herein, we thoroughly discussed the recent development of various synthetic strategies employed to prepare PL-CNPs, doping effects, photostability, biocompatibility, and applications in sensing, bioimaging, and drug delivery fields. Moreover, the review discussed the limitations, future direction, and perspectives of PL-CNPs in possible potential applications.

Waste to value transformation: Converting Carica papaya seeds into green fluorescent carbon dots for simultaneous selective detection and degradation of tetracycline hydrochloride in water

Rampant use of antibiotics has resulted in their seepage into groundwater and ultimately ending up in the food chain, causing antimicrobial resistance. To address this issue, it is imperative to not only quantitatively detect but eliminate them from water. An eco-friendly, one-step microwave-induced pyrolysis of waste papaya seeds (PS) with ethylenediamine (EDA) for just 5min gave green fluorescent nitrogen-doped carbon dots (PS-CDs), which are capable of detecting and photocatalytically degrading TC. The fluorescence properties of PS-CDs displayed that it has high sensitivity and selectivity towards sensing of TC with a detection limit as low as 120 nM. Also, the method gave satisfactory recovery results when extrapolated to determine TC in spiked milk, orange juice, tap water, and honey samples. On the other hand, PS-CDs alone potentially function as an efficient photocatalyst for the degradation of TC. PS-CDs' dual functionality provides an effectual method for the simultaneous detection and degradation of TC by a single nanoprobe.

Sophorajaponica L. flower mediated carbon dots with nitrogen and sulfur co-doped as a sensitive fluorescent probe for amoxicillin detection

This article first reported the green synthesis of N, S co-doped fluorescent carbon dots (N, S-CDs-Sop) and sought to establish the fluorescence detection system for amoxicillin (AMX). By using Sophorajaponica L. flower as the green precursor and dl-homocystine as the co-dopant, N, S-CDs-Sop were successfully prepared via a one-pot hydrothermal method, exhibiting good water solubility and excellent photoluminescence. It was revealed that the surface of N, S-CDs-Sop was abundant in amino, hydroxyl and carboxyl groups after being characterized by a variety of techniques. When Fe³⁺ was added, Fe³⁺ could be complexed with N, S-CDs-Sop to from N, S-CDs-Sop-Fe³⁺ chelation leading to a significant static quenching of fluorescence. However, when N, S-CDs-Sop, Fe³⁺ and AMX coexisted, AMX would coordinate with Fe³⁺ and form the strong chelate due to the favorable chemical structure, resulting in the rapid fluorescence recovery. Such a fast, simple and sensitive fluorescence "off-on" strategy with a low LOD and a relatively wide range was successfully applied to the detection of AMX, which is closely correlated with human health.

Study on the microstructure of the symbiosis of coal-based graphene and coal-based graphene quantum dots: preparation and characterization

Coal-based graphene sheets (GS) and coal-based graphene quantum dots (GQDs) are usually prepared separately. In this paper, symbiosis of coal-based GS and coal-based GQDs was successfully prepared with our proposed preparation method by using three raw coals with different reflectance (collected from Qinshui coalfield, Shanxi Province) as carbon sources. The results showed that coal-based GS and coal-based GQDs can exist stably in the symbiosis and are distributed in different layers, and the GQDs are freely distributed between layers of GS. The average number of GS (N_ave) in the three symbiosis is about 7 and the average interlayer spacing (d₀₀₂) is about 0.3887 nm. The average diameter of GQDs in the three symbiosis is about 4.255 nm and the averaged₀₀₂is about 0.230 nm. The averageN_aveof the three symbiosis was about 3 and the averaged₀₀₂is about 0.361 nm. The morphology and crystal parameters of symbiosis is more similar to that of graphene, the elements are only carbon and oxygen. In the prepared symbiosis, the higher the reflectance of raw coal, the smoother the lattice skeleton and the less vortex-layer structure of GS, and the larger the diameter and the denser the six membered ring of GQDs. The C and O functional groups of the prepared symbionts are similar. The higher the reflectance of coal, the higher the content of C-C/C=C. Under ultraviolet light, the prepared products all emit blue, and the higher the reflectance of coal, the higher the ultraviolet absorption, and the stronger the fluorescence intensity.

Alkaline n-gqds fluorescent probe for the ultrasensitive detection of creatinine

Creatinine (Crn) is an important excretory product of the human body. Medical laboratory technology has improved over years and brought many advancements in clinical diagnostics equipment, and testing techniques and made the tests more efficient. Yet, the quantitative analysis of Crn is still carried out by the classical Jaffe's reaction (using Picric acid (PA) with NaOH) method. Since PA is hazardous to human health, alternative solutions such as; nanoparticles and surface-modified nanoparticles can be used. Exploring the optoelectronic properties of carbon-based quantum dots for biomolecule sensing is of current interest among researchers. Nitrogen functionalized graphene quantum dots (Alk-NGQDs) measured featured Crn easier and reduced the time taken for the test carried out in laboratories. The synthesized Alk-NGQDs optical, structural, morphological properties, surface and compositions are studied through XPS, HRTEM, XRD, FTIR, and spectroscopic techniques. Alk-NGQDs at alkaline conditions (pH 9.5) form a stable complex with Crn through intermolecular charge transfer (ICT). The fluorescence titration method is used to sense Crn in commercial Crn samples and human blood serum. To understand the efficacy of sensing creatinine using Alk-NGQDs, working concentration, fluorescence quantum yield, the limit of detection, and quenching constant are calculated using the Stern-Volmer plot. The emission property of Alk-NGQDs is aimed to bring an alternative to the traditional colorimetric Jaffe's reaction.

Coal-derived graphene quantum dots with a Mn2+/Mn7+ nanosensor for selective detection of glutathione by a fluorescence switch-off–on assay

Coal derived GQDs-Mn2+/Mn7+ nanosensor for the sensitive detection of GSH.

Cytotoxicity and cell imaging of six types of carbon nanodots prepared through carbonization and hydrothermal processing of natural plant materials

In this study we prepared six types of carbon nanodots (CNDs) from natural plant materials – through carbonization of two species of bamboo (Bamboo-I, Bamboo-II) and one type of wood (Wood), and through hydrothermal processing of the stem and root of the herb Mahonia oiwakensis Hayata (MO) and of the agricultural waste of two species of pineapple root (PA, PB). The resulting CNDs were spherical with dimensions on the nanoscale (3–7 nm); furthermore, CND-Bamboo I, CND-Wood, CND-Bamboo II, CND-MO, CND-PA, and CND-PB displayed fluorescence quantum yields of 9.63, 12.34, 0.90, 10.86, 0.35, and 0.71%, respectively. X-ray diffraction revealed that the carbon nanostructures possessed somewhat ordered and disordered lattices, as evidenced by broad signals at values of 2θ between 20 and 30°. CND-Bamboo I, CND-Wood, and CND-Bamboo II were obtained in yields of 2–3%; CND-MO, CND-PA, and CND-PB were obtained in yields of 17.64, 9.36, and 22.47%, respectively. Cytotoxicity assays for mouse macrophage RAW264.7 cells treated with the six types of CNDs and a commercial sample of Ag nanoparticles (NPs) revealed that each of our CNDs provided a cell viability of 90% at 2000 μg mL⁻¹, whereas it was only 20% after treatment with the Ag NPs at 62.5 μg mL⁻¹. The six types of CNDs also displayed low cytotoxicity toward human keratinocyte HacaT cells, human MCF-7 breast cancer cells, and HT-29 colon adenocarcinoma cells when treated at 500 μg mL⁻¹. Moreover, confocal microscopic cell imaging revealed that the fluorescent CND-Bamboo I particles were located on the MCF-7 cell membrane and inside the cells after treatment for 6 and 24 h, respectively. We have thoroughly investigated the photoluminescence properties and carbon nanostructures of these highly dispersed CNDs. Because of the facile green synthesis of these six types of CNDs and their sourcing from abundant natural plants, herbs, and agriculture waste, these materials provide a cost-effective method, with low cytotoxicity and stable fluorescence, for biolabeling and for developing cell nanocarriers.

Green nanotechnology of six types of carbon nanodots (CNDs), and their sourcing from abundant natural plants, herbs, and agriculture waste, provides a cost-effective method, with low cytotoxicity and stable fluorescence, for biolabeling and for developing cell nanocarriers.