Sulfonation of alginate grafted with polyacrylamide as a potential binder for high-capacity Si/C anodes

Random Copolymer Hydrogel as Elastic Binder for the SiOx Microparticle Anode in Lithium-Ion Batteries

Silicon suboxides (SiO_x) have been widely concerned as a practical anode material for the next-generation lithium-ion batteries due to their relatively high theoretical capacity and lower volume change compared to silicon (Si). Nevertheless, traditional binder poly(vinylidene difluoride) (PVDF) still cannot hold the integrity of the SiO_x particle due to its weak van der Waals force. Herein, a copolymer binder for SiO_x microparticles is synthesized through a facile method of free radical polymerization between acrylamide (AM) and acrylic acid (AA). By adjusting the mass ratio of the AM/AA monomer, the copolymer binder can generate a covalent-noncovalent network with superior elastic properties from the synergistic effect. During electrochemical testing, the SiO_x anode with the optimal copolymer binder (AM/AA = 3:1) delivered a reversible capacity of 734 mAh g^-1 (two times that of commercial graphite) at 0.5C after 300 cycles. Thus, this work developed a green and effective strategy for synthesizing a water-soluble binder for Si-based anodes.

Application of Guar Gum and its Derivatives as Green Binder/Separator for Advanced Lithium-Ion Batteries

Since their first commercialization in the 1990s,lithium-ion batteries (LIBs) have become an indispensible part of our everyday life in particular for portable electronic devices. LIBs have been considered as the most promising sustainable high energy density storage device. In recent years, there is a strong demand of LIBs for hybrid electric and electric vehicles to lower carbon footprint and mitigate climate change. However, LIBs have several issues, for example, high cost and safety issues such as over discharge, intolerance to overcharge, high temperature operation etc. To address these issues several new types of electrodes are being studied. Traditional binder PVDF is costly, difficult to recyle, undergoes side reactions at high temperature and cannot stabilize high energy density electrodes. To overcome these challenges, diiferent binders have been introduced with these electrodes. This minireview is focused on the application of guar gum as a binder for different electrodes and separator. The electrochemical performance of electrodes with guar gum has been compared with other binders.

Polymer Binders: Characterization and Development toward Aqueous Electrode Fabrication for Sustainability

Binders play an important role in electrode processing for energy storage systems. While conventional binders often require hazardous and costly organic solvents, there has been increasing development toward greener and less expensive binders, with a focus on those that can be processed in aqueous conditions. Due to their functional groups, many of these aqueous binders offer further beneficial properties, such as higher adhesion to withstand the large volume changes of several high-capacity electrode materials. In this review, we first discuss the roles of binders in the construction of electrodes, particularly for energy storage systems, summarize typical binder characterization techniques, and then highlight the recent advances on aqueous binder systems, aiming to provide a stepping stone for the development of polymer binders with better sustainability and improved functionalities.