New titania-based photocatalysts for hydrogen production from aqueous-alcoholic solutions of methylene blue

Copper-Modified Titania-Based Photocatalysts for the Efficient Hydrogen Production under UV and Visible Light from Aqueous Solutions of Glycerol

In this study, we have proposed titania-based photocatalysts modified with copper compounds for hydrogen evolution. Thermal pre-treatment of commercial TiO₂ Degussa P25 (DTiO₂) and Hombifine N (HTiO₂) in the range from 600 to 800 °C was carried out followed by the deposition of copper oxides (1-10 wt. % of Cu). The morphology and chemical state of synthesized photocatalysts were studied using X-ray diffraction, UV-Vis diffuse reflectance spectroscopy, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and XANES/EXAFS X-ray absorption spectroscopy. Photocatalytic activity was tested in the hydrogen evolution from aqueous solutions of glycerol under ultraviolet (λ = 381 nm) and visible (λ = 427 nm) light. The photocatalysts 2% CuO_x/DTiO₂ T750 and 5% CuO_x/DTiO₂ T700 showed the highest activity under UV irradiation (λ = 380 nm), with the rate of H₂ evolution at the level of 2.5 mmol (H₂) g^-1 h^-1. Under the visible light irradiation (λ = 427 nm), the highest activity of 0.6 mmol (H₂) g^-1 h^-1 was achieved with the 5% CuO_x/DTiO₂ T700 photocatalyst. The activity of these photocatalysts is 50% higher than that of the platinized 1% Pt/DTiO₂ sample. Thus, it was shown for the first time that a simple heat treatment of a commercial titanium dioxide in combination with a deposition of non-noble metal particles led to a significant increase in the activity of photocatalysts and made it possible to obtain materials that were active in hydrogen production under visible light irradiation.

Broadening the Action Spectrum of TiO2-Based Photocatalysts to Visible Region by Substituting Platinum with Copper

In this study, TiO₂-based photocatalysts modified with Pt and Cu/CuO_x were synthesized and studied in the photocatalytic reduction of CO₂. The morphology and chemical states of synthesized photocatalysts were studied using UV-Vis diffuse reflectance spectroscopy, high-resolution transmission electron microscopy, and X-ray photoelectron spectroscopy. A series of light-emitting diodes (LEDs) with maximum intensity in the range of 365–450 nm was used to determine the action spectrum of photocatalysts. It is shown for, the first time, that the pre-calcination of TiO₂ at 700 °C and the use of Cu/CuO_x instead of Pt allow one to design a highly efficient photocatalyst for CO₂ transformation shifting the working range to the visible light (425 nm). Cu/CuO_x/TiO₂ (calcined at 700 °C) shows a rate of CH₄ formation of 1.2 ± 0.1 µmol h⁻¹ g⁻¹ and an overall CO₂ reduction rate of 11 ± 1 µmol h⁻¹ g⁻¹ (at 425 nm).

Electrochemical Synthesis-Dependent Photoelectrochemical Properties of Tungsten Oxide Powders

A rapid, facile, and environmentally benign strategy to electrochemical oxidation of metallic tungsten under pulse alternating current in an aqueous electrolyte solution was reported. Particle size, morphology, and electronic structure of the obtained WO3 nanopowders showed strong dependence on electrolyte composition (nitric, sulfuric, and oxalic acid). The use of oxalic acid as an electrolyte provides a gram-scale synthesis of WO3 nanopowders with tungsten electrochemical oxidation rate of up to 0.31 g·cm−2·h−1 that is much higher compared to the strong acids. The materials were examined as photoanodes in photoelectrochemical reforming of organic substances under solar light. WO3 synthesized in oxalic acid is shown to exhibit excellent activity towards the photoelectrochemical reforming of glucose and ethylene glycol, with photocurrents that are nearly equal to those achieved in the presence of simple alcohol such as ethanol. This work demonstrates the promise of pulse alternating current electrosynthesis in oxalic acid as an efficient and sustainable method to produce WO3 nanopowders for photoelectrochemical applications.

Microwave-assisted synthesis of an RGO/CdS/TiO2 step-scheme with exposed TiO2 {001} facets and enhanced visible photocatalytic activity

Semiconductor-based heterojunction photocatalysts with a special active crystal surface act as an essential part in environmental remediation and renewable energy technologies. In this study, an RGO/CdS/TiO₂ step-scheme with high energy {001} TiO₂ facets was successfully fabricated via a microwave-assisted solvothermal method. The photocatalytic performance of as-prepared samples was assessed by degrading methylene blue under visible light irradiation. We found that the photocatalytic activity of the RGO/CdS/TiO₂ step-scheme heterojunction was related to the proportion of TiO₂. A ternary sample with a TiO₂ content of 10 wt% exhibited superior photocatalytic performance, and approximately 99.7% of methylene blue was degraded during 50 min of visible illumination which was much higher than the percentages found for TiO₂, CdS, RGO/TiO₂, and RGO/CdS. The greatly improved photocatalytic performance is due to the exposure of the reactive {001} surface of TiO₂ and the formation of a CdS/TiO₂ heterojunction step-scheme, which effectively inhibits the recombination of charge carriers at the heterogeneous interfaces. Moreover, the incorporation of graphene further enhances the visible light harvesting and serves as an electron transport channel for rapidly separating photogenerated carriers. Based on the PL, XPS, photoelectrochemical properties and the free radical capturing experiment results, a possible photodegradation mechanism was proposed.

The photocatalytic enhancement of RGO/CdS/TiO₂ is due to the high-energy {001} surface of TiO₂ and CdS forming a stepped heterojunction, which is dispersed on the surface of reduced graphene oxide.