Temperature-dependence on the optical properties of chitosan carbon dots in the solid state

Honeycomb waste-derived carbon dots as a sensitive sensing probe for detection of capecitabine chemo drug

Anticancer medication provoked concerns owing to its adverse health effects from overdose and henceforth, its sensitive monitoring is crucial. Carbon dots (CDs), as a pioneering carbon nanomaterial, have particles lower than 10 nm. CDs have an extensive multitude of applications based on their luminous qualities. The present era is focused on turning waste into economically viable products. The current research demonstrates a feasible method for preparing green fluorescent CDs from honeycomb waste (HCCDs). The HCCDs display excitation-dependent emission properties, exhibiting a blue shift with a change in excitation wavelength, and acquiring good stability with a zeta potential of -14.8 mV. Nevertheless, the particle size ranges between 2-5 nm. It is noteworthy that the fluorescence intensity of HCCDs was remarkably enhanced by the addition of increasing concentrations of capecitabine due to complex formation. Additionally, the sensor shows a determined detection limit of 1.04 μmolL-1 without interference from ions. This demonstrates exclusive selectivity and sensitivity which paves a new way for the determination of the capecitabine drug.

Solvent-Dependent Photoluminescence Emission and Colloidal Stability of Carbon Quantum dots from Watermelon Peels

Waste peels are considered an environmental burden and typically disposed in landfills. The aim of this study was to investigate the effects of various solvents on the luminescence properties of carbon quantum dots (CQDs). Watermelon peels were recycled and reuse as precursors for the synthesis of biomass CQDs via a green carbonization method. The colloidal stability, surface charge, and particle size were characterized using zeta potential and dynamic light scattering (DLS). DLS revealed that the size of the CQDs was approximately 5.80 ± 0.4 nm to 9.74 ± 0.8 nm. The high-resolution transmission electron microscopy (HRTEM) results demonstrated a correlation with the DLS results. The optical properties were characterized by photoluminescence (PL) and UV-Visible (UV-Vis) spectroscopy. PL measurements at different excitation wavelengths revealed that the CQDs emissions were influenced by the polarity of the solvents. Meanwhile, the Fourier transform infra-red (FTIR) results showed the presence of oxygen-containing groups on the surface of the CQDs. These results deepen our understanding of the solvent-dependent behavior and colloidal stability of the CQDs.

Functional composite films incorporating triphala-derived carbon dots for extending chicken preservation

Triphala-based carbon dots (T-CDs) were successfully prepared using a simple one-step hydrothermal method. T-CDs were characterized by absorbance, fluorescence, Fourier-transform infrared, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. T-CDs showed bright blue fluorescence at 434 nm upon excitation at 360 nm. Functional composite films were prepared using poly(vinyl alcohol) and gelatin mixture by incorporating T-CDs and applied as a packaging film to extend the shelf life of chicken. The antibacterial activity of T-CDs against Listeria monocytogenes and Staphylococcus aureus was evaluated using well diffusion and colony count methods. T-CDs were evenly dispersed throughout the PVA/Gel solution to form a dense and uninterrupted film. They also formed strong bonds with polymer chains, which improved the tensile strength of the film from 32.44 to 42.70 MPa. Furthermore, the presence of T-CDs significantly enhanced the UV-blocking ability of the PVA/Gel films, achieving 99.7 % for UV-B and 97.2 % for UV-A. In addition, the PVA/Gel/T-CDs composite films showed excellent antioxidant, antimicrobial and UV-barrier properties, extending the shelf life of chicken. Therefore, the PVA/Gel/T-CDs composite films showed great potential as an active food packaging material to extend the shelf life and preserve the visual quality of packaged meat.

Plasmon-emitter coupling in cytosine-rich hairpin DNA-templated silver nanoclusters: Thermal reversibility, white light emission, and dynamics inside live cells

Bio-templated luminescent noble metal nanoclusters (NCs) have attracted great attention for their intriguing physicochemical properties. Continuous efforts are being made to prepare NCs with high fluorescence quantum yield (QY), good biocompatibility, and tunable emission properties for their widespread practical applications as new-generation environment-friendly photoluminescent materials in materials chemistry and biological systems. Herein, we explored the unique photophysical properties of silver nanoclusters (AgNCs) templated by cytosine-rich customized hairpin DNA. Our results indicate that a 36-nucleotide containing hairpin DNA with 20 cytosine (C20) in the loop can encapsulate photostable red-emitting AgNCs with an absolute QY of ∼24%. The luminescent properties in these DNA-templated AgNCs were found to be linked to the coupling between the surface plasmon and the emitter. These AgNCs exhibited excellent thermal sensitivity and were employed to produce high-quality white light emission with an impressive color rendering index of 90 in the presence of dansyl chloride. In addition, the as-prepared luminescent AgNCs possessing excellent biocompatibility can effectively mark the nuclear region of HeLa cells and can be employed as a luminescent probe to monitor the cellular dynamics at a single molecular resolution.

Carbon Nanomaterial Fluorescent Probes and Their Biological Applications

Fluorescent carbon nanomaterials have broadly useful chemical and photophysical attributes that are conducive to applications in biology. In this review, we focus on materials whose photophysics allow for the use of these materials in biomedical and environmental applications, with emphasis on imaging, biosensing, and cargo delivery. The review focuses primarily on graphitic carbon nanomaterials including graphene and its derivatives, carbon nanotubes, as well as carbon dots and carbon nanohoops. Recent advances in and future prospects of these fields are discussed at depth, and where appropriate, references to reviews pertaining to older literature are provided.

Novel ligand decorated theranostic zein nanoparticles coloaded with paclitaxel and carbon quantum dots: formulation and optimization

Aim: The present research focused on development and optimization of ligand decorated theranostic nanocarrier encapsulating paclitaxel and carbon quantum dots (CQDs). Methods: CQDs were prepared by microwave-assisted pyrolysis and were characterized for particle size and fluorescence behavior. Ligand decorated zein nanoparticles, coloaded with paclitaxel and CQDs, were formulated using a one-step nanoprecipitation method and optimized for various process parameters. Results: Particle size for coated and uncoated nanoparticles was 90.16 ± 1.65 and 179.26 ± 3.61 nm, respectively, and entrapment efficiency was >80%. The circular dichroism spectroscopy showed zein retained its secondary structure and release study showed biphasic release behavior. Conclusion: The prepared theranostic nanocarrier showed optimal fluorescence and desired release behavior without altering the secondary structure of zein.

White light emission from helically stacked humin-mimic based H-aggregates in heteroatom free carbon dots

White light emission (WLE), particularly from heteroatom free carbon dots (CDs), is unusual. Besides, deciphering the origin of WLE from a H-aggregated molecular fluorophore in such kinds of CDs is a challenging task due to their non-fluorescent character resulting from a forbidden transition from a lower-energy excitonic state. Therefore, rigorous investigation on their elusive excited state photophysical properties along with their steady-state optical phenomena has to be carried out to shed light on the nature of distinct emissive states formed in the CDs. Herein, for the first time, we report WLE from imperfect H-aggregates of co-facially π-π stacked humin-like structures comprising furfural monomer units as a unique molecular fluorophore in CDs, as revealed from combined spectroscopic and microscopic studies, synthesized through hydrothermal treatment of the single precursor, dextrose. H-aggregates in CDs show a broad range of excitation-dependent emission spectra with color coordinates close to pure white light, i.e., CIE (0.35, 0.37) and a color temperature of 6000 K. Imperfect orientation between the transition dipole moments of adjacent monomer units in the H-aggregate's molecular arrangement is expected to cause ground state symmetry breaking, as confirmed by Circular Dichroism (CD) studies, which established helically stacked nature in molecular aggregates and produced significant oscillatory strength at lower energy excitonic states to enable fluorescence. TRES and TAS investigations have been performed to minimise the intricacies associated with excited state photophysics, which is regarded as an essential step in gaining a grasp on emissive states. Based on the observation of two isoemissive spots in the time-resolved area normalized emission spectra (TRANES), the existence of three oligomeric species in the excited state equilibrium of the pure/hybrid H-aggregates has been established. The exciton dynamics through electron relaxation from the higher to the lower excitonic states, charge transfer (CT) states, and surface trap mediated emission in excimer states of H-aggregates have also been endorsed as three distinct emissive states from femtosecond transient absorption spectroscopy (TAS) studies corroborating with their steady-state absorption and emission behavior. The results would demonstrate the usage of CDs as a cutting-edge fluorescent material for creating aggregate-induced white light emission.

Passive anti-leakage of blue light for phosphor-converted white LEDs with crystal nanocellulose materials

A phenomenon known as "blue-light leakage" caused by overheating pcW-LEDs has recently been identified, and it poses a risk to users. This study focuses on investigating and optimizing a solution to address this issue. To tackle the problem of overheating and blue light leakage, we explored the application of a specific thermochromic material called crystal nano cellulose (CNC). We introduced CNC inside the epoxy lens of white LEDs. Importantly, under standard conditions, CNC has a negligible impact on the optical properties of the output white light. However, when overheating conditions arise, leading to blue light leakage, the temperature increase triggers a darkening effect in CNC. This thermochromic behavior of CNC allows it to strongly absorb the blue light, resulting in a significant suppression of the output luminous flux. As a result, the lamp dims, which not only prevents the user's eyes from being exposed to harmful bluish light but also serves as an indicator of aging in the pcW-LED. By implementing CNC as a responsive material in the design of white LEDs, this study offers a practical and effective solution to mitigate the negative effects of blue-light leakage caused by overheating. This improvement enhances the safety and comfort of users while also providing an early warning system for the aging of pcW-LEDs.

Carbon Quantum Dots Based on Marine Polysaccharides: Types, Synthesis, and Applications

The marine environment offers a vast array of resources, including plants, animals, and microorganisms, that can be utilized to extract polysaccharides such as alginate, carrageenan, chitin, chitosan, agarose, ulvan, porphyra, and many more. These polysaccharides found in marine environments can serve as carbon-rich precursors for synthesizing carbon quantum dots (CQDs). Marine polysaccharides have a distinct advantage over other CQD precursors because they contain multiple heteroatoms, including nitrogen (N), sulfur (S), and oxygen (O). The surface of CQDs can be naturally doped, reducing the need for excessive use of chemical reagents and promoting green methods. The present review highlights the processing methods used to synthesize CQDs from marine polysaccharide precursors. These can be classified according to their biological origin as being derived from algae, crustaceans, or fish. CQDs can be synthesized to exhibit exceptional optical properties, including high fluorescence emission, absorbance, quenching, and quantum yield. CQDs' structural, morphological, and optical properties can be adjusted by utilizing multi-heteroatom precursors. Moreover, owing to their biocompatibility and low toxicity, CQDs obtained from marine polysaccharides have potential applications in various fields, including biomedicine (e.g., drug delivery, bioimaging, and biosensing), photocatalysis, water quality monitoring, and the food industry. Using marine polysaccharides to produce carbon quantum dots (CQDs) enables the transformation of renewable sources into a cutting-edge technological product. This review can provide fundamental insights for the development of novel nanomaterials derived from natural marine sources.

Facile synthesis of graphene quantum dots with red emission and high quantum yield

Preparation of GQDs for application in cell imaging.

Plasmonic Refractive Index Sensor Enhanced with Chitosan/Au Bilayer Thin Film for Dopamine Detection

Surface plasmonic sensors have received considerable attention, found extensive applications, and outperformed conventional optical sensors. In this work, biopolymer chitosan (CS) was used to prepare the bilayer structure (CS/Au) of a plasmonic refractive index sensor for dopamine (DA) detection. The sensing characteristics of the developed plasmonic sensor were evaluated. Increasing DA concentrations significantly shifted the SPR dips. The sensor exhibited stability and a refractive index sensitivity of 8.850°/RIU in the linear range 0.1 nM to 1 µM with a detection limit of 0.007 nM and affinity constant of 1.383 × 108 M-1. The refractive index and thickness of the CS/Au structure were measured simultaneously by fitting the obtained experimental findings to theoretical data based on Fresnel equations. The fitting yielded the refractive index values n (1.5350 ± 0.0001) and k (0.0150 ± 0.0001) for the CS layer contacting 0.1 nM of DA, and the thickness, d was (15.00 ± 0.01) nm. Then, both n and d values increased by increasing DA concentrations. In addition, the changes in the FTIR spectrum and the variations in sensor surface roughness and structure obtained by AFM analysis confirmed DA adsorption on the sensing layer. Based on these observations, CS/Au bilayer has enhanced the performance of this plasmonic sensor, which showed promising importance as a simple, low-cost, and reliable platform for DA sensing.

Multiple fluorescence response behaviours to proteins/bacteria and selective antibacterial activity of cetylpyridinium chloride (CPC)-based cationic carbon dots

Direct interaction between carbon dots (CDs) and biomolecules leads to changes in the chemical and physical status as well as properties of CDs, which can have various biological and biomedical applications. In this work, the surface of CDs was modified with cetylpyridinium chloride (CPC) to facilitate interactions between CDs and biomolecules. Multiple fluorescence response behaviours of CPC-based CDs were observed towards several proteins (bovine serum albumin, lysozyme, protamine, and hemoglobin) and bacterial cells (Escherichia coli and Staphylococcus aureus). Electrostatic attraction and hydrogen bonding were involved in inducing aggregation of CDs and fluorence enhancement. An inner filter effect might also occur to reduce fluorescence of CDs when interacting with proteins. Selective antibacterial activity of CPC-based CDs was observed towards Gram positive bacterium Staphylococcus aureus. This work provides potential to develop CD-based techniques for detecting and visualizing proteins/bacteria as well as selective antibacterial agents towards Gram-positive bacteria.

Passivator-Free Microwave–Hydrothermal Synthesis of High Quantum Yield Carbon Dots for All-Carbon Fluorescent Nanocomposite Films

Based on the self-passivation function of chitosan, an efficient, and green synthesis strategy was applied to prepare chitosan carbon dots (CDs). The quantum yield of carbon dots reached 35% under the conditions of hydrothermal temperature of 200 °C, hydrothermal time of 5 h, and chitosan concentration of 2%. Moreover, the obtained carbon dots had high selectivity and sensitivity to Fe3+. Based on the Schiff base reaction between the aldehyde groups of dialdehyde cellulose nanofibrils (DNF) and the amino groups of CDs, a chemically cross-linked, novel, fluorescent composite film, with high transparency and high strength, was created using one-pot processing. Knowing that the fluorescence effect of the composite film on Fe3+ had a linear relationship in the concentration range of 0–100 μM, a fluorescent probe can be developed for quantitative analysis and detection of Fe3+. Owing to their excellent fluorescent and mechanical properties, the fluorescent nanocomposite films have potential applications in the fields of Fe3+ detection, fluorescent labeling, and biosensing.

Photo- and Radiofrequency-Induced Heating of Photoluminescent Colloidal Carbon Dots

Nitrogen- and oxygen-containing carbon nanoparticles (O, N-CDs) were prepared by a facile one-step solvothermal method using urea and citric acid precursors. This method is cost-effective and easily scalable, and the resulting O, N-CDs can be used without additional functionalization and sample pretreatment. The structure of O, N-CDs was characterized by TEM, AFM, Raman, UV-vis, and FTIR spectroscopies. The obtained O, N-CDs with a mean diameter of 4.4 nm can be easily dispersed in aqueous solutions. The colloidal aqueous solutions of O, N-CDs show significant photothermal responses under red-IR and radiofrequency (RF) irradiations. The as-prepared O, N-CDs have a bright temperature-dependent photoluminescence (PL). PL/PLE spectral maps were shown to be used for temperature evaluation purposes in the range of 30-50 °C. In such a way, the O, N-CDs could be used for biomedicine-related applications such as hyperthermia with simultaneous temperature estimation with PL imaging.

Tuning the photoluminescence by engineering surface states/size of S, N co-doped carbon dots for cellular imaging applications

In this research, we have synthesized carbon dots (CDs) co-doped with nitrogen and sulfur by facile hydrothermal method, using citric acid and cysteine as carbon source. The effect of solid-state thermic treatment (STT) at 303-453 K on the size, surface, fluorescence and cellular cytotoxicity of the CDs were systematically investigated. Through a simple STT, it was possible to tune surface states and the average size of the CDs, causing a permanent red shift. Initially, CDs showed a decrease in cell viability with increasing concentration. However, after STT, its viability remained constant with an increase in concentration. Here, we show the possibility to label the cells cytoplasm according to the CDs fluorescence emission before (blue emission) and after STT (red emission). The CDs studied in this paper show selective luminescence properties, which are fundamental for any cell imaging application.

Applications of Carbon Dots for the Photocatalytic and Electrocatalytic Reduction of CO2

The photocatalytic and electrocatalytic conversion of CO2 has the potential to provide valuable products, such as chemicals or fuels of interest, at low cost while maintaining a circular carbon cycle. In this context, carbon dots possess optical and electrochemical properties that make them suitable candidates to participate in the reaction, either as a single component or forming part of more elaborate catalytic systems. In this review, we describe several strategies where the carbon dots participate, both with amorphous and graphitic structures, in the photocatalysis or electrochemical catalysis of CO2 to provide different carbon-containing products of interest. The role of the carbon dots is analyzed as a function of their redox and light absorption characteristics and their complementarity with other known catalytic systems. Moreover, detailed information about synthetic procedures is also reviewed.