Introduction of a trinuclear manganese(iii) catalyst on the surface of magnetic cellulose as an eco-benign, efficient and reusable novel heterogeneous catalyst for the multi-component synthesis of new derivatives of xanthene

Loading of green-synthesized cu nanoparticles on Ag complex containing 1,3,5-triazine Schiff base with enhanced antimicrobial activities

The physicochemical properties of materials change significantly in nanometer dimensions. Therefore, several methods have been proposed for the synthesis of nanoparticles. Plant extracts and essential oils are applied as natural and economic resources to prepare nanomaterials especially metal nanoparticles. In this project, a green, simple and efficient method has been designed for the synthesis of Cu nanoparticles using Purple cabbage extract as a reducing and stabilizing agent. They were successfully loaded onto a new Ag complex containing 1,3,5-triazine Schiff base as ligand to form Cu@Ag-CPX nanocomposite. Phytochemical contents of extract were identified by standard qualitative analyses. The chemical structure of all synthesized compounds was characterized using spectral data. In FT-IR, coordination of C=N bond of Schiff base ligand to Ag+ ions shifted the absorption band from 1641 to 1632 cm-1. The UV-Vis spectrum of Cu@Ag-CPX nanocomposite shown the peak related to Cu nanoparticles in the region of around 251 nm. 5:7 molar ratio of Cu to Ag in Cu@Ag-CPX was determined using ICP-OES. The FESEM, TEM, and DLS techniques provided valuable insights into the morphology and size distribution of the nanocomposite, revealing the presence of rods and monodispersed particles with specific diameter ranges. These analyses of the nanocomposite displayed rods with diameters from 40 to 62 nm as well as monodispersed and uniform particles with average diameter of 45 nm, respectively. The presence of elements including carbon, nitrogen, oxygen, Cu and Ag was proved by EDX-EDS analysis. The XRD pattern of Cu@Ag-CPX shown the diffraction peaks of Cu and Ag particles at 2θ values of 10°-80°, and confirmed its crystalline nature. The inhibitory properties of the synthesized compounds were evaluated in vitro against four Gram-negative and two Gram-positive bacteria, as well as two fungal strains. The MIC, MBC and MFC values obtained from microdilution and streak plate sensitivity tests were ranged from 128 to 4096 µg ml-1. While Cu nanoparticles and Ag complexes were effective against some pathogens, they were not effective against all them. However, the growth of all tested microbial strains was inhibited by Cu@Ag-CPX nanocomposite, and makes it as a new promising antimicrobial agent. Modification of nanocomposite in terms of nanoparticle and complex can improve its blocking activities.

Advances in the greener synthesis of chromopyrimidine derivatives by a multicomponent tandem oxidation process

A hydrophilic cobalt/copper heterogeneous bimetallic catalyst named mTEG-CS-Co/Cu-Schiff-base/IL was successfully synthesized from chitosan polysaccharide. The new catalyst was investigated and confirmed using various techniques including FT-IR, FE-SEM, EDX-EDS, XRD, TEM, TGA, AFM, NMR and ICP. The catalyst exhibited powerful catalyst activity for the tandem one pot oxidative chromopyrimidine reaction from benzyl alcohols under mild conditions, utilizing air as a clean source in a green protocol. The catalyst was compatible with a wide range of benzyl alcohols, and aldehydes formed in situ, and bis-aldehydes synthesized were condensed with urea/4‑hydroxycumarin to provide favorable products in good yields for all derivatives (14 new derivatives). The presence of tri-ethylene glycol and imidazolium moieties with hydrophilic properties on the mTEG-CS-Co/Cu-Schiff-base/IL nanohybrid provides dispersion of the nanohybrid particles in water, leading to higher catalytic performance. Furthermore, the reaction exhibited several other notable features, including low catalyst loading, the ability to be recycled for up to 6 stages, high atom economy, a simple work procedure, short reaction time, utilization of an environmentally friendly nanohybrid, and the replacement of volatile and organic solvents with water solvent.

Continuous flow catalysis with CuBTC improves reaction time for synthesis of xanthene derivatives

The copper-based metal-organic framework (MOF) CuBTC (where H3BTC = benzene-1,3,5-tricarboxylate) has been shown to be an efficient heterogeneous catalyst for the generation of 1,8-dioxo-octa-hydro xanthene derivatives, which are valuable synthetic targets for the pharmaceutical industry. We have applied this catalytic capability of CuBTC to a continuous flow system to produce the open chain form of 3,3,6,6-tetramethyl-9-phenyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione, a xanthene derivative from benzaldehyde and dimedone. An acid work-up after producing the open chain form of the xanthene derivative was used to achieve ring closure and form the final xanthene product. The CuBTC used to catalyze the reaction under continuous flow was confirmed to be stable throughout this process via analysis by SEM, pXRD, and FT-IR spectroscopy, elemental analysis, and XPS. The reaction to produce the open-chain form of the xanthene derivative produced an average yield of 33% ± 14% under the continuous flow (compared to 33% ± 0.12% of performing it under batch conditions). Based on the data obtained from this work, the continuous flow system required 22.5x less time to produce the desired xanthene derivative at comparable yields to batch reaction conditions. These results would allow for the xanthene derivative to be produced much faster, at a lower cost, and require less personal time while also removing the need to perform catalyst remove post reaction.

A CMC-g-poly(AA-co-AMPS)/Fe3O4 hydrogel nanocomposite as a novel biopolymer-based catalyst in the synthesis of 1,4-dihydropyridines

A CMC-g-poly(AA-co-AMPS)/Fe₃O₄ hydrogel nanocomposite was successfully designed and prepared via graft copolymerization of AA and AMPS on CMC followed by the cross-linking addition of FeCl₃/FeCl₂. The synthesized hydrogel nanocomposite was characterized by Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) spectroscopy, elemental mapping, thermogravimetric analysis/differential thermal analysis (TGA/DTA), and vibrating sample magnetometry (VSM). The CMC-g-poly(AA-co-AMPS)/Fe₃O₄ hydrogel nanocomposite was employed as a biocompatible catalyst for the green synthesis of 1,4-dihydropyridine (1,4-DHP) derivatives under thermal and ultrasound-assisted reaction conditions. High efficiency, low catalyst loadings, short reaction time, frequent catalyst recovery, environmental compatibility and mild conditions were found in both methods.

TiO2/g-C3N4/SO3H(IL): Unique Usage of Ionic Liquid-Based Sulfonic Acid as an Efficient Photocatalyst for Visible-Light-Driven Preparation of 5-HMF from Cellulose and Glucose

Upgrading of biomass wastes to value-added materials has been incessantly pursued worldwide with diverse applications, especially deploying photocatalytic composites encompassing metal oxides with acidic and carbon compounds. Herein, the fabrication of a morphologically unique acidic catalyst encompassing a two-dimensional (2D) TiO₂/g-C₃N₄ heterojunction feature is described for the generation of 5-hydroxymethylfurfural (5-HMF), which exploits the acidic/ionic liquid (IL) bifunctional photocatalysis under visible light. The structural integrity of the synthesized TiO₂/g-C₃N₄/SO₃H(IL) was corroborated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy-energy-dispersive spectroscopy (EDX-EDS), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FESEM), UV-vis, Tauc plots, transmission electron microscopy (TEM), and Brunauer-Emmett-Teller-Barrett-Joyner-Halenda (BET-BJH) analyses. Keeping environmental impact in mind, there are compelling advantages in the development of bio-derived pathways to access ILs from natural renewable resources. The outcomes of environmental assessments have revealed that the incorporation of TiO₂ in g-C₃N₄ and ClSO₃H can reduce the probability of recombination due to ionic charges present, therefore enhancing the photocatalytic activity via the transformation of cellulose and glucose to produce 5-HMF in higher yields, with the optimum conditions being reaction in water under a blue light-emitting diode (LED), at 100 °C, for 1-1.5 h. The main advantages of this production method include minimum number of synthetic steps as well as ample availability of and easy access to primary ingredients. While a significant volume of 5-HMF was produced under blue light-emitting diode (LED) radiation, the selectivity was drastically reduced in the dark. The salient attributes of the catalyst comprise stability in air, robustness, reusability, and its overall superior activity that is devoid of hazardous additives or agents. This inimitable method has uncovered a newer strategy for enhancing the photocatalytic attributes of deployed semiconducting materials for numerous photocatalytic functions while adhering to the tenets of environmental friendliness.

BioMOF-Mn: An Antimicrobial Agent and an Efficient Nanocatalyst for Domino One-Pot Preparation of Xanthene Derivatives

In this paper, a new Mn-based metal-organic framework [UoB-6] was obtained via a one-step ultrasonic irradiation method with the ligand (H₂bdda: 4,4'-(1,4-phenylenebis(azaneylylidene))bis(methaneylylidene))dibenzoic acid. The structural integrity of the synthesized BioMOF-Mn was corroborated by FT-IR, EDX, ICP, XRD, TEM, DLS, FESEM, and BET-BJH analyses. The aerobic oxidative domino reaction of benzyl alcohols or aldehydes with dimedone derivatives was performed in the presence of the UoB-6 catalyst to produce xanthene derivatives in good yields. Hot filtration and Hg poisoning tests proved the heterogeneous nature of the catalyst. Novel synthesized xanthene-based bis-aldehydes were introduced as potent HDAC1 inhibitors according to molecular docking calculations. Finally, the inhibitory activities of Mn-MOF nanoparticles were evaluated on Escherichia coli and Candida albicans. The MIC, MBC, and MFC values were determined from 2048 to 4096 μg·mL^-1 according to antimicrobial susceptibility testing methods. The inhibitory effects of antimicrobial agents can be exacerbated when loaded on BioMOFs.

NiII NPs entrapped within a matrix of l-glutamic acid cross-linked chitosan supported on magnetic carboxylic acid-functionalized multi-walled carbon nanotube: a new and efficient multi-task catalytic system for the green one-pot synthesis of diverse heterocyclic frameworks

In the present study, a new l-glutamic acid cross-linked chitosan supported on magnetic carboxylic acid-functionalized multi-walled carbon nanotube (Fe3O4/f-MWCNT-CS-Glu) nanocomposite was prepared through a convenient one-pot multi-component sequential strategy. Then, nickelII nanoparticles (NiII NPs) were entrapped within a matrix of the mentioned nanocomposite. Afterward, the structure of the as-prepared Fe3O4/f-MWCNT-CS-Glu/NiII nanosystem was elucidated by various techniques, including FT-IR, PXRD, SEM, TEM, SEM-based EDX and elemental mapping, ICP-OES, TGA/DTA, and VSM. In the next part of this research, the catalytic applications of the mentioned nickelII-containing magnetic nanocomposite were assessed upon green one-pot synthesis of diverse heterocyclic frameworks, including bis-coumarins (3a-n), 2-aryl(or heteroaryl)-2,3-dihydroquinazolin-4(1H)-ones (5a-r), 9-aryl-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-diones (7a-n), and 2-amino-4-aryl-7,7-dimethyl-5-oxo-5,6,7,8-tetrahydro-4H-chromene-3-carbonitriles (9a-n). The good-to-excellent yields of the desired products, satisfactory reaction rates, use of water solvent or solvent-free reaction medium, acceptable turnover numbers (TONs) and turnover frequencies (TOFs), along with comfortable recoverability and satisfying reusability of the as-prepared nanocatalyst for at least eight successive runs, and also easy work-up and purification procedures are some of the advantages of the current synthetic protocols.

Recent advances in the application of magnetic bio-polymers as catalysts in multicomponent reactions

Magnetic nanoparticles have attracted significant attention due to their high surface area and superparamagnetic properties. Bio-polymers composed of polysaccharides including alginate, cellulose, glucose, dextrin, chitosan, and starch can be immobilized on magnetic nanoparticles. Bio-polymers can be obtained from natural sources, such as plants, tunicates, algae, and bacteria. Bio-polymers obtained from natural sources have attracted attention due to their various properties including efficient functional groups, non-toxicity, low cost, availability, and biocompatibility. According to the targets of "green chemistry", the application of bio-polymers is effective in reducing pollution. Furthermore, they are excellent agents for the functionalization of magnetic nanoparticles to yield nanomagnetic bio-polymers, which can be applied as recoverable and eco-friendly catalysts in multicomponent reactions.

Diverse and efficient catalytic applications of new cockscomb flower-like Fe3O4@SiO2@KCC-1@MPTMS@CuII mesoporous nanocomposite in the environmentally benign reduction and reductive acetylation of nitroarenes and one-pot synthesis of some coumarin compounds

In this research, Fe3O4@SiO2@KCC-1@MPTMS@CuII as a new cockscomb flower-like mesoporous nanocomposite was prepared and characterized by various techniques including Fourier transform infrared (FT-IR) spectroscopy, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), SEM-based energy-dispersive X-ray (EDX) spectroscopy, inductively coupled plasma-optical emission spectrometry (ICP-OES), thermogravimetric analysis/differential thermal analysis (TGA/DTA), vibrating sample magnetometry (VSM), UV-Vis spectroscopy, and Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH) analyses. The as-prepared Fe3O4@SiO2@KCC-1@MPTMS@CuII mesoporous nanocomposite exhibited satisfactory catalytic activity in the reduction and reductive acetylation of nitroarenes in a water medium and solvent-free one-pot synthesis of some coumarin compounds including 3,3'-(arylmethylene)bis(4-hydroxy-2H-chromen-2-ones) (namely, bis-coumarins) (3a-n) and 2-amino-4-aryl-7,7-dimethyl-5-oxo-5,6,7,8-tetrahydro-4H-chromene-3-carbonitriles (6a-n) along with acceptable turnover numbers (TONs) and turnover frequencies (TOFs). Furthermore, the mentioned CuII-containing mesoporous nanocatalyst was conveniently recovered by a magnet from reaction environments and reused for at least seven cycles without any significant loss in activity, which confirms its good stability.

New Acetamidine Cu(II) Schiff base complex supported on magnetic nanoparticles pectin for the synthesis of triazoles using click chemistry

In this project, the new catalyst copper defines as Fe3O4@Pectin@(CH2)3-Acetamide-Cu(II) was successfully manufactured and fully characterized by different techniques, including FT-IR, XRD, TEM, FESEM, EDX, VSM, TGA, and ICP analysis. All results showed that copper was successfully supported on the polymer-coated magnetic nanoparticles. One of the most important properties of a catalyst is the ability to be prepared from simple materials such as pectin that's a biopolymer that is widely found in nature. The catalytic activity of Fe3O4@Pectin@(CH2)3-Acetamide-Cu(II) was examined in a classical, one pot, and the three-component reaction of terminal alkynes, alkyl halides, and sodium azide in water and observed, proceeding smoothly and completed in good yields and high regioselectivity. The critical potential interests of the present method include high yields, recyclability of catalyst, easy workup, using an eco-friendly solvent, and the ability to sustain a variety of functional groups, which give economical as well as ecological rewards. The capability of the nanocomposite was compared with previous works, and the nanocomposite was found more efficient, economical, and reproducible. Also, the catalyst can be easily removed from the reaction solution using an external magnet and reused for five runs without reduction in catalyst activity.

Rice straw ash extract/glycerol: an efficient sustainable approach for Knoevenagel condensation

WERSA/glycerol is described as a powerful combination for the green approach of the Knoevenagel reaction, without any additional catalyst, base or promoter.

A Green Synthesis Strategy of Binuclear Catalyst for the C-C Cross-Coupling Reactions in the Aqueous Medium: Hiyama and Suzuki-Miyaura Reactions as Case Studies

Cellulose, as a green and available phytochemical, was immobilized on the surface of magnetite nanoparticles then doped with imidazole and Co. complex (Fe3O4@CNF ∼ ImSBL ∼ Co.) and used as a water-dispersible, recyclable and efficient nano catalyst for the synthesis of C-C cross-coupling reactions including fluoride-free Hiyama and Suzuki reactions in an aqueous medium as an efficient and vital solvent, due to their high application and importance in various fields of science. Different spectroscopic and microscopic techniques were used for the catalyst characterization such XRD, FESEM, TEM, FT-IR, EDX, DLS, VSM, UV-Vis, and ICP analyses. The presence of imidazole as ionic section tags with hydrophilic character on the Co-complex supported on magnetic nanoparticles provides dispersion of the catalyst particles in water, which leads to both higher catalytic performance and also facile catalyst recovery and reuse six times by successive extraction and final magnetic separation. High catalytic activity was found for the catalyst and high to excellent efficiency was obtained for all Suzuki (80-98% yield; E factor: 1.1-1.9) and Hiyama (87-98% yield; E factor: 0.26-1.1) derivatives in short reaction times under mild reaction conditions in the absence of any hazardous or expensive materials. There is not any noticeable by-product found whether for Suzuki or Hiyama derivatives, which reflects the high selectivity and also the lower the E factor the more favorable is the process in view of green chemistry. The bi-aryls were achieved from the reaction of various aryl iodides/bromides and even chlorides as the highly challenging substrates, which are more available and cheaper, with triethoxyphenylsilane or phenylboronic acid. To prove the performance of the catalyst components (synergistic of SBL ∼ Co. and IL), its different homologs were incorporated individually and studied for a model reaction. Exclusively, this is an introductory statement on the use of Cobalt binuclear symmetric ionic liquid catalysts in Hiyama reactions.

Robust, highly active, and stable supported Co(ii) nanoparticles on magnetic cellulose nanofiber-functionalized for the multi-component reactions of piperidines and alcohol oxidation

The new recyclable cobalt three-core magnetic catalyst obtained by anchoring a Schiff base ligand sector and cellulose nanofiber slings on MNP (Fe3O4) was prepared and named as MNP@CNF@ATSM-Co(ii). Separately, MNPs and CNF have adsorbent properties of great interest. In this way, this catalyst was designed to synthesize piperidine derivatives under solvent-free conditions and alcohol oxidation reactions in EtOH as the solvent. It should be noted that this catalyst is environmentally safe and does not need an external base. This MNPs@CNF@ATSM-Co(ii) separable catalyst has been evaluated using various characterization techniques such as FT-IR, XRD, FE-SEM, EDX, EDS, ICP, TGA, DLS, HRTEM, and VSM. The catalyst was compatible with a variety of benzyl alcohols, benzaldehydes, and amines derivatives, and gave complimentary coupling products with sufficient interest for all of them. The synergistic performance of Co (trinuclear) in the catalyst was demonstrated and its different homologs such as MNPs, MNPs@CNF, MNPs@CNF@ATS-Co(ii), and MNPs@CNF@ATSM-Co(ii) were separately synthesized and applied to a model reaction, and then their catalytic activity was investigated. Also, the performance of these components for the oxidation reaction of alcohols was evaluated. The advantages of the current protocol include the use of a sustainable and safe low temperature, eco-friendly solvent no additive, and long-term stability and magnetic recyclability of the catalyst for at least five successive runs, thus following green chemistry principles. This protocol is a benign and environment-friendly method for oxidation and heterocycle synthesis. This powerful super-magnetic catalyst can use its three arms to advance the reactions, displaying its power for multi-component reactions and oxidation.

The anchoring of a Cu(ii)-salophen complex on magnetic mesoporous cellulose nanofibers: green synthesis and an investigation of its catalytic role in tetrazole reactions through a facile one-pot route

Today, most synthetic methods are aimed at carrying out reactions under more efficient conditions and the realization of the twelve principles of green chemistry. Due to the importance and widespread applications of tetrazoles in various industries, especially in the field of pharmaceutical chemistry, and the expansion of the use of nanocatalysts in the preparation of valuable chemical reaction products, we decided to use an (Fe3O4@NFC@NSalophCu)CO2H nanocatalyst in this project. In this study, the synthesis of the nanocatalyst (Fe3O4@NFC@NSalophCu)CO2H was explained in a step-by-step manner. Confirmation of the structure was obtained based on FT-IR, EDX, FE-SEM, TEM, XRD, VSM, DLS, TGA, H-NMR, and CHNO analyses. The catalyst was applied to the synthesis of 5-substituted-1H-tetrazole and 1-substituted-1H-tetrazole derivatives through multi-component reactions (MCRs), and the performance was assessed. With advances in science and technology and increasing environmental pollution, the use of reagents and methods that are less dangerous for the environment has received much attention. Therefore, following green chemistry principles, with the help of the (Fe3O4@NFC@NSalophCu)CO2H salen complex as a nanocatalyst that is recyclable, cheap, safe, and available, the use of water as a green solvent, and reduced reaction times, the synthesis of tetrazoles can be achieved.

Synthesis, characterization and cytotoxicity evaluation of a novel magnetic nanocomposite with iron oxide deposited on cellulose nanofibers with nickel (Fe3O4@NFC@ONSM-Ni)

A heterogeneous, magnetically recoverable nanocomposite, Fe3O4@NFC@ONSM-Ni(ii) was prepared by immobilization of a novel Ni(ii) Schiff base complex on Fe3O4@NFC nanoparticles followed by treatment with melamine. This trinuclear catalyst has been characterized using several analytical techniques including FT-IR, TEM, Fe-SEM, EDX, DLS, ICP, TGA, VSM, and XRD. It was used as an efficient catalyst for one-pot solvent-free synthesis of 1,4-dihydropyridine and poly-hydro quinoline derivatives through Hantzsch reaction. This catalyst showed remarkable advantage over previously reported catalysts due to suitable conditions, short reaction time, high efficiency and lower catalyst load and timely recovery of the magnetic catalyst. Moreover, the effects of Fe3O4@NFC@ONSM-Ni(ii) nanoparticles on the in vitro proliferation of human leukemia cell line (k562) and human breast cancer cells (MDA-MB-231) were investigated. The results of MTT and Hochest assays suggested that the nanoparticles could effectively inhibit the proliferation of these cancer cells in a time- and concentration-dependent manner.