Hydrogen induced interface engineering in Fe2O3-TiO2 heterostructures for efficient charge separation for solar-driven water oxidation in photoelectrochemical cells

Understanding and optimizing the sensitization of anatase titanium dioxide surface with hematite clusters

The presence of hematite (Fe2O3) clusters at low coverage on titanium dioxide (TiO2) surface has been observed to enhance photocatalytic activity, while excess loading of hematite is detrimental. We conduct a comprehensive density functional theory study of Fe2O3clusters adsorbed on the anatase TiO2(101) surface to investigate the effect of Fe2O3on TiO2. Our study shows that TiO2exhibits improved photocatalytic properties with hematite clusters at low coverage, as evidenced by a systematic study conducted by increasing the number of cluster adsorbates. The adsorption of the clusters generates impurity states in the band gap improving light absorption and consequently affecting the charge transfer dynamics. Furthermore, the presence of hematite clusters enhances the activity of TiO2in the hydrogen evolution reaction. The Fe valence mixing present in some clusters leads to a significant increase in H2evolution rate compared with the fixed +3 valence of Fe in hematite. We also investigate the effect of oxygen defects and find extensive modifications in the electronic properties and local magnetism of the TiO2-Fe2O3system, demonstrating the wide-ranging effect of oxygen defects in the combined system.

Fabrication of nitrogen doped TiO2/Fe2O3 nanostructures for photocatalytic oxidation of methanol based wastewater

An important industrial process that often occurs on the surface of a heterogeneous catalyst using thermochemical or photochemical could help in the oxidation of methanol-based wastewater to formaldehyde. Titania-based photocatalysts have drawn a lot of interest from scientists because they are a reliable and affordable catalyst material for photocatalytic oxidation processes in the presence of light energy. In this study, a straight-forward hydrothermal method for producing n-TiO₂@α-Fe₂O₃ composite photocatalysts and hematite (α-Fe₂O₃) nanocubes has been done. By adjusting the ratio of n-TiO₂ in the prepared composite photocatalysts, the enhancing influence of the nitrogen-doped titania on the photocatalytic characteristics of the prepared materials was investigated. The prepared materials were thoroughly characterized using common physiochemical methods, such as transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray diffraction (XRD), energy dispersive X-ray (EDX), X-ray photoelectrons spectroscopy (XPS), physisorption (BET), and others, in order to learn more about the structure The results obtained showed that nitrogen-doped titania outperforms non-doped titania for methanol photooxidation. The addition of nitrogen-doped titania to their surfaces resulted in an even greater improvement in the photooxidation rates of the methanol coupled with hematite. The photooxidation of methanol in the aqueous solution to simulate its concentration in the wastewater has been occurred. After 3 h, the four weight percent of n-TiO₂@α-Fe₂O₃ photocatalyst showed the highest rate of HCHO production.

Preparation and application of α-Fe2O3@TiO2@SO3H for photocatalytic degradation and COD reduction of woodchips industry wastewater

In this study, we investigated the efficiency of photocatalytic degradation and chemical oxygen demand (COD) reduction from woodchips industry wastewater using α-Fe₂O₃@TiO₂@SO₃H. A magnetic α-Fe₂O₃@TiO₂@SO₃H was prepared as a heterogeneous photo-Fenton catalyst. The Fourier transform infrared (FT-IR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), and elemental mapping (MAP) analyses were performed to determine the structure and morphology of synthesized photocatalysts. The response surface methodology (RSM) was used to optimize the photo-Fenton process based on a Box-Behnken design (BBD). The parameters such as catalyst dosage, H₂O₂ dosage, pH, and contact time on photocatalytic degradation and the reduction of COD were studied. The maximum photocatalytic degradation of 93.75% and COD reduction of 86.54% were achieved at a dosage of the catalyst of 1 g L^-1, H₂O₂ dosage of 40 mg L^-1, and a pH of 3.5 at 45 min. The kinetics of the photo-Fenton process was studied for the woodchips wastewater treatment under optimum conditions. The pseudo-second-order kinetic model for photocatalytic degradation and COD reduction was obtained. The results indicated that a α-Fe₂O₃@TiO₂@SO₃H could be used as an effective heterogeneous photocatalyst for the treatment of woodchips industry wastewater. Preparation and application of α-Fe₂O₃@TiO₂@SO₃H for photocatalytic degradation and COD reduction of woodchips industry wastewater.

Synthesis, Characterization and Photoelectric Properties of Fe2O3 Incorporated TiO2 Photocatalyst Nanocomposites

In the present work we report the sol-gel synthesis of pure TiO2 and (TiO2)1−x(Fe2O3)x nanocomposites with different Fe2O3 contents (x = 0, 0.1, 0.5, and 1.0 for pure TiO2, Fe2O3 incorporated 0.1, 0.5, and pure Fe2O3 which are denoted as PT, 0.1F, 0.5F, and PF, respectively). The structural, morphological, optical, and surface texture of the prepared nanocomposites were characterized using various techniques. The structural studies confirm the strong influence of Fe2O3 contents on the crystallite sizes and dislocation values. The size of the crystallites was increased by the increase in Fe2O3 contents. The bandgap values elucidated from DRS analysis were decreased from 3.15 eV to 1.91 eV with increasing Fe2O3 contents. The N2-Physorption analysis has confirmed the mesoporous nature of the samples with a comparable specific surface area of 35 m2/g. The photoelectrochemical measurements (CV, CA and EIS) were performed to assess the photoelectric properties of the prepared materials. It was found that the PT samples have the highest catalytic activity and photocurrent response compared to other composites. The reduction in current density was as follows: 2.8, 1.65, 1.5 and 0.9 mA/cm2, while the photocurrent response was ca. 800, 450, 45, 35 µA/cm2 for PT, 0.1F, 0.5F and PF samples, respectively. The EIS results showed that the (TiO2)1−x(Fe2O3)x nanocomposites exhibit lower charge transfer resistance than pure titania and hematite samples.

Improving light absorption and photoelectrochemical performance of thin-film photoelectrode with a reflective substrate

The charge separation/transport efficiency is relatively high in thin-film hematite photoanodes in which the distance for charge transport is short, but simultaneously the high loss of light absorption due to transmission is confronted. To increase light absorption in thin-film Fe₂O₃:Ti, commercial substrates such as Cu foil, Ag foil, and a mirror are adopted acting as back-reflectors and individually integrated with the Fe₂O₃:Ti electrode. The promotion effect of the commercial back-reflectors on the light absorption efficiency and photoelectrochemical (PEC) performance of the hydrothermally prepared Fe₂O₃:Ti electrodes with a variety of film thicknesses is investigated. As a result, Ag foil and the mirror show favorable and equal efficacy while the promoting effect of Cu foil is limited. In addition, the photocurrent increment achieved by the Ag back-reflector decreases linearly along with the logarithmic of the film thickness and the optimized film thickness of the Fe₂O₃:Ti electrode is decreased from 520 to 290 nm. The high durability of Ag foil in the alkaline electrolyte during solar light irradiation is demonstrated. Furthermore, the reflective substrate also shows a promotion effect on the BiVO₄ photoanode and CuBi₂O₄ photocathode, as well as the unbiased photocurrent from a tandem cell constituted by TiO₂ and CuBi₂O₄.

The charge separation/transport efficiency is relatively high in thin-film hematite photoanodes in which the distance for charge transport is short, but simultaneously the high loss of light absorption due to transmission is confronted.

Solvothermal phase change induced morphology transformation in CdS/CoFe2O4@Fe2O3 hierarchical nanosphere arrays as ternary heterojunction photoanodes for solar water splitting

The design of efficient heterojunction photoanodes with appropriate band alignment and ease of charge separation has been one of the most highly focused research areas in photoelectrodes.