Pristine graphene covalent functionalization with aromatic aziridines and their application in the sensing of volatile amines - an ab initio investigation

Surface Tailoring of MoS2 Nanosheets with Substituted Aromatic Diazonium Salts for Gas Sensing: A DFT Study

Two-dimensional (2D) nanomaterials are useful for building gas sensors owing to their desirable electronic and optical properties. However, they usually suffer from selectivity, because they cannot discriminate between gas molecules. Functionalization with organic molecules can be used to tailor their surfaces to recognize a specific family of compounds. In this study, solid-state density functional theory (DFT) was used to elucidate the functionalization of MoS2 with substituted aromatic diazonium salts (R = -H, - CH3, -CO2H, -CHO, -OCH3, and -NO2). Results showed that chemical reaction with diazonium salts is favored to their physical adsorption (E ads = -0.04 to -0.38 eV vs E rxn = -1.47 to -2.20 eV), where organic cations have a preference to attach atop of sulfur atoms. Chemical functionalization induced a small variation in the bandgap energy not exceeding 0.04 eV; thus, the optical properties were well preserved. In the presence of ammonia, the substituted MoS 2 /2(a-f) responded to the target analyte through a change in the interaction energy, varying from -0.08 to -0.83 eV, where the best interaction energy was obtained for MoS 2 /2c, bearing the carboxylic acid group. In the presence of other gases such as CO2, SO2, and H2S, the interaction energy is lower (-0.14 to -0.35 eV), indicating good selectivity of the nanomaterials. Furthermore, the interaction increased in the presence of humidity, which was more realistic than that in the presence of neat NH3. This interaction was confirmed by computing the partial charges. Recovery times estimated from the interaction energies ranged from 0.31 s to several minutes, depending on the interacting molecules. Phenylcarboxyl-modified MoS2 nanosheets show great potential as candidates for the development of chemoresistive gas sensors that are specifically designed for detecting ammonia.

Covalent surface modification of single-layer graphene-like BC6N nanosheets with reactive nitrenes for selective ammonia sensing via DFT modeling

Novel graphene-like nanomaterials with a non-zero bandgap are important for the design of gas sensors. The selectivity toward specific targets can be tuned by introducing appropriate functional groups on their surfaces. In this study, we use first-principles simulations, in the form of density functional theory (DFT), to investigate the covalent functionalization of a single-layer graphitized BC6N with azides to yield aziridine-functionalized adducts and explore their possible use to realize ammonia sensors. First, we determine the most favorable sites for physical adsorption and chemical reaction of methylnitrene, arising from the decomposition of methylazide, onto a BC6N monolayer. Then, we examine the thermodynamics of the [1 + 2]-cycloaddition reaction of various phenylnitrenes and perfluorinated phenylnitrenes para-substituted with (R = CO2H, SO3H) groups, demonstrating favorable energetics. We also monitor the effect of the functionalization on the electronic properties of the nanosheets via density of states and band structure analyses. Finally, we test four dBC6N to gBC6N substrates in the sensing of ammonia. We show that, thanks to their hydrogen bonding capabilities, the functionalized BC6N can selectively detect ammonia, with interaction energies varying from -0.54 eV to -1.37 eV, even in presence of competing gas such as CO2and H2O, as also confirmed by analyzing the change in the electronic properties and the values of recovery times near ambient temperature. Importantly, we model the conductance of a selected substrate alone and in presence of NH3to determine its effect on the integrated current, showing that humidity and coverage conditions should be properly tuned to use HO2C-functionalized BC6N-based nanomaterials to develop selective gas sensors for ammonia.

Two-Legged Molecular Walker and Curvature: Mechanochemical Ring Migration on Graphene

Attaining controllable molecular motion at the nanoscale can be beneficial for multiple reasons, spanning from optoelectronics to catalysis. Here we study the movement of a two-legged molecular walker by modeling the migration of a phenyl aziridine ring on curved graphene. We find that directional ring migration can be attained on graphene in the cases of both 1D (wrinkled/rippled) and 2D (bubble-shaped) curvature. Using a descriptor approach based on graphene's frontier orbital orientation, we can understand the changes in binding energy of the ring as it translates across different sites with variable curvature and the kinetic barriers associated with ring migration. Additionally, we show that the extent of covalent bonding between graphene and the molecule at different sites directly controls the binding energy gradient, propelling molecular migration. Importantly, one can envision such walkers as carriers of charge and disruptors of local bonding. This study enables a new way to tune the electronic structure of two-dimensional materials for a range of applications.

Surface modification of graphene with functionalized carbenes and their applications in the sensing of toxic gases: a DFT study

Graphene and other 2D materials have gained significant attention in the development of gas sensors. In this study, we employed Density Functional Theory (DFT) to investigate the adsorption properties of diazomethanes (1a-1g) with various functional groups (R = OH (a), OMe (b), OEt (c), OPr (d), CF₃ (e), Ph (f)) on pristine graphene. Furthermore, we explored the adsorption behavior of activated carbenes (2a-2g) generated from the decomposition of diazomethanes on graphene, as well as the functionalized graphene derivatives (3a-3g) resulting from [2 + 1] cycloaddition reactions between (2a-2g) and graphene. The interaction between these functionalized derivatives (3a-3g) and toxic gases was also investigated. Our results revealed that carbenes exhibited a stronger affinity for graphene compared to diazomethanes. The adsorption energy of esters (3b, 3c, and 3d) on graphene decreased relative to compound 3a, while 3e exhibited increased adsorption energy due to the electron-withdrawing effect of fluorine atoms. Additionally, the adsorption energy of phenyl and nitrophenyl groups (3f and 3g) decreased due to their π-stacking interaction with graphene. Importantly, all functionalized derivatives (3a-3g) demonstrated favorable interactions with gases. Notably, the derivative 3a, acting as a hydrogen bonding donor, exhibited superior performance. Furthermore, modified graphene derivatives exhibited the highest adsorption energy with NO₂ gas, highlighting their potential for selective NO₂ sensing applications. These findings contribute to the understanding of gas-sensing mechanisms and the design of novel graphene-based sensor platforms.

Laser-induced graphene electrodes scribed onto novel carbon black-doped polyethersulfone membranes for flexible high-performance microsupercapacitors

A facile and expandable methodology was successfully developed to fabricate laser-induced graphene from novel pristine aminated polyethersulfone (amPES) membranes. The as-prepared materials were applied as flexible electrodes for microsupercapacitors. The doping of amPES membranes with various weight percentages of carbon black (CB) microparticles was then performed to improve their energy storage performance. The lasing process allowed the formation of sulfur- and nitrogen-codoped graphene electrodes. The effect of electrolyte on the electrochemical performance of as-prepared electrodes was investigated and the specific capacitance was significantly enhanced in 0.5 M HClO₄. Remarkably, the highest areal capacitance of 47.3 mF·cm^-2 was achieved at a current density of 0.25 mA·cm^-2. This capacitance is approximately 12.3 times higher than the average value for commonly used polyimide membranes. Furthermore, the energy and power densities were as high as 9.46 µWh·cm^-2 and 0.3 mW·cm^-2 at 0.25 mA·cm^-2, respectively. The galvanostatic charge-discharge experiments confirmed the excellent performance and stability of amPES membranes during 5,000 cycles, where more than 100% of capacitance retention was achieved and the coulombic efficiency was improved up to 96.67%. Consequently, the fabricated CB-doped PES membranes offer several advantages including low carbon fingerprint, cost-effectiveness, high electrochemical performance and potential applications in wearable electronic systems.

Quantum tailoring of electronic properties in covalently functionalized graphene: application to ammonia gas detection

Functionalized graphene offers great potential in the field of rapid detection of gases at room temperature. We performed first-principles calculations to study the suitability of 4-sulfobenzenediazonium salts (4SBD) as bandgap modifier in graphene. The signature of unpaired spins is evidenced near the Fermi level owing to the symmetry breaking of graphene sublattices. 4SBD-chemisorbed on graphene is found to be electronically sensitive to the presence of ammonia NH3 with increasing gas concentration.