The role of solvent molecular weight in shear thickening and shear jamming

Rheological Properties of Dense Particle Suspensions of Starches: Shear Thickening, Shear Jamming, and Shock Absorption Properties

Concentrated suspensions of Brownian and non-Brownian particles display distinctive rheological behavior highly dependent on shear rate and shear stress. Cornstarch suspensions, composed of starch particles from corn plants, served as a model for concentrated non-Brownian suspensions, demonstrating discontinuous shear thickening (DST) and dynamic shear jamming (SJ). However, starch particles from other plant sources have not yet been investigated, despite their different sizes and shapes. This study is focused on the evaluation of the effects of the structural parameters of starch particles by preparing concentrated suspensions of starch particles from 13 different plants at particle fractions of 25-50% and their rheological behavior through steady shear, pull-out, and ball-drop tests. Starch particles can be roughly classified as polygonal and ellipsoidal. The DST and SJ behavior typically reported for concentrated cornstarch suspensions were confirmed for other starch particles in both particle groups. The ball-drop test demonstrated excellent shock absorption properties for 11 concentrated suspensions of starch particles, except for sago palms. In the case of concentrated suspensions of starch particles, the particle fraction and shear applied were the dominant factors that significantly affected the rheological behavior, whereas the particle shape was not a primary contributor. The findings of this study drive further investigation on the effect of liquid and particle surface properties in concentrated particle suspensions on DST and SJ behaviors.

Effect of Liquid Properties on the Non-Newtonian Rheology of Concentrated Silica Suspensions: Discontinuous Shear Thickening, Shear Jamming, and Shock Absorbance

Concentrated particle suspensions exhibit rheological behavior, such as discontinuous shear thickening (DST) and dynamic shear jamming (SJ), which affect applications such as soft armors. Although the origin of this behavior in shear-activated particle-particle interactions has been identified, the effect of chemical factors, especially the role of liquids, on this behavior remains unexplored. Hydrogen bonding in suspensions has been proposed to be essential for frictional contacts between particles, and therefore, most studies on DST and SJ have focused on aqueous and protic organic media with a definite hydrogen bonding ability. To identify an alternative molecular mechanism, this study explored the effects of liquid polarity and an aprotic nature on the rheological behavior of concentrated suspensions of silica microparticles. Owing to their excellent particle dispersion, the DST behavior of polar liquids was observed, independent of protic and aprotic liquids. In contrast, nonpolar liquids formed particle agglomerates because of the particle-particle attraction and became a paste at a high particle fraction. The SJ behavior was confirmed for three aprotic organic liquids (propylene carbonate, 1,3-dimethyl-2-imidazolidinone, and 1,3-dimethylpropyleneurea), suggesting the hydrogen bonding ability of these aprotic liquids. The diverse mechanisms of shear-activated interactions between particles present material design possibilities for the non-Newtonian rheology of concentrated particle suspensions.

Optimizing non-Newtonian fluids for impact protection of laminates

Non-Newtonian fluids can be used for the protection of flexible laminates. Understanding the coupling between the flow of the protecting fluid and the deformation of the protected solids is necessary in order to optimize this functionality. We present a scaling analysis of the problem based on a single coupling variable, the effective width of a squeeze flow between flat rigid plates, and predict that impact protection for laminates is optimized by using shear-thinning, and not shear-thickening, fluids. The prediction is verified experimentally by measuring the velocity and pressure in impact experiments. Our scaling analysis should be generically applicable for non-Newtonian fluid-solid interactions in diverse applications.

Shear jamming and fragility in fractal suspensions under confinement

Under applied stress, the viscosity of many dense particulate suspensions increases drastically, a response known as discontinuous shear-thickening (DST). In some cases, the applied stress can even transform the suspension into a solid-like shear jammed state. Although shear jamming (SJ) has been probed for dense suspensions with particles having well-defined shapes, such a phenomenon for fractal objects has not been explored. Here, using rheology and in situ optical imaging, we study the flow behaviour of ultra-dilute fractal suspensions of multi-walled carbon nanotubes (MWCNT) under confinement. We show a direct transition from flowing to SJ state without a precursory DST in fractal suspensions at an onset volume fraction, ϕ ∼ 0.5%, significantly lower than that of conventional dense suspensions (ϕ ∼ 55%). The ultra-low concentration enables us to demonstrate the fragility and associated contact dynamics of the SJ state, which remain experimentally unexplored in suspensions. Furthermore, using a generalized Wyart-Cates model, we propose a generic phase diagram for fractal suspensions that captures the possibility of SJ without prior DST over a wide range of shear stress and volume fractions.

Designing Stress-Adaptive Dense Suspensions Using Dynamic Covalent Chemistry

The non-Newtonian behaviors of dense suspensions are central to their use in technological and industrial applications and arise from a network of particle–particle contacts that dynamically adapt to imposed shear. Reported herein are studies aimed at exploring how dynamic covalent chemistry between particles and the polymeric solvent can be used to tailor such stress-adaptive contact networks, leading to their unusual rheological behaviors. Specifically, a room temperature dynamic thia-Michael bond is employed to rationally tune the equilibrium constant (K_eq) of the polymeric solvent to the particle interface. It is demonstrated that low K_eq leads to shear thinning, while high K_eq produces antithixotropy, a rare phenomenon where the viscosity increases with shearing time. It is proposed that an increase in K_eq increases the polymer graft density at the particle surface and that antithixotropy primarily arises from partial debonding of the polymeric graft/solvent from the particle surface and the formation of polymer bridges between particles. Thus, the implementation of dynamic covalent chemistry provides a new molecular handle with which to tailor the macroscopic rheology of suspensions by introducing programmable time dependence. These studies open the door to energy-absorbing materials that not only sense mechanical inputs and adjust their dissipation as a function of time or shear rate but also can switch between these two modalities on demand.

In Situ Observation of Shear-Induced Jamming Front Propagation during Low-Velocity Impact in Polypropylene Glycol/Fumed Silica Shear Thickening Fluids

Shear jamming, a relatively new type of phase transition from discontinuous shear thickening into a solid-like state driven by shear in dense suspensions, has been shown to originate from frictional interactions between particles. However, not all dense suspensions shear jam. Dense fumed silica colloidal systems have wide applications in the industry of smart materials from body armor to dynamic dampers due to extremely low bulk density and high colloid stability. In this paper, we provide new evidence of shear jamming in polypropylene glycol/fumed silica suspensions using optical in situ speed recording during low-velocity impact and explain how it contributes to impact absorption. Flow rheology confirmed the presence of discontinuous shear thickening at all studied concentrations. Calculations of the flow during impact reveal that front propagation speed is 3–5 times higher than the speed of the impactor rod, which rules out jamming by densification, showing that the cause of the drastic impact absorption is the shear jamming. The main impact absorption begins when the jamming front reaches the boundary, creating a solid-like plug under the rod that confronts its movement. These results provide important insights into the impact absorption mechanism in fumed silica suspensions with a focus on shear jamming.

Fumed Silica-Based Suspensions for Shear Thickening Applications: A Full-Scale Rheological Study

Understanding shear thickening fluids (STFs) is critically important in a broad spectrum of fields ranging from biology to military. STFs are referred to the suspension of solid particles in an inert carrier liquid. Customizing the thickening behavior is vital for obtaining desired properties. Hence, comprehending shear thickening mechanisms is necessary to fully understand the factors affecting the shear thickening response of the STFs. Herein, we systematically investigate the effects of a wide range of parameters, from inherent properties of the constituents, including size and surface chemistry of the suspended particles, to practical conditions such as temperature and shear history, on the shear thickening behavior of fumed silica nanoparticles (NPs)-based suspensions in a polyethylene glycol (PEG) medium. Accordingly, increasing the hydrophobicity of the silica NPs or decreasing the NP size transforms the suspensions from sol to gel. The sol systems exhibit a strong shear thickening response, while shear thinning behavior is prominent in the strong gel systems. Hybridization of different silica NPs is also leveraged to tune the shear thickening behavior. In addition, we showcase the decisive role of operating temperature or shear history on the shear thickening behavior of suspensions. For instance, in terms of the shear history, above a critical value of preshear, the shear thickening behavior occurs at lower shear rates for STFs containing hydrophilic NPs. It is believed that the provided insights in this study can pave the way for developing advanced STFs with prescribed features.